int usb_bulk_get_max_lun(mass_dev* dev) {
int ret;
usb_callback_data cb_data;
iop_sema_t s;
char max_lun;
s.initial = 0;
s.max = 1;
s.option = 0;
s.attr = 0;
cb_data.semh = CreateSema(&s);
//Call Bulk only mass storage reset
ret = UsbControlTransfer(
dev->controlEp, //default pipe
0xA1,
0xFE,
0,
dev->interfaceNumber, //interface number
1, //length
&max_lun, //data
usb_callback,
(void*) &cb_data
);
if (ret != USB_RC_OK) {
printf("USBHDFSD: Error - get_max_lun %d\n", ret);
max_lun = -ret;
} else {
WaitSema(cb_data.semh);
}
DeleteSema(cb_data.semh);
return max_lun;
}
static void ds3_set_operational(int slot)
{
UsbControlTransfer(ds3_list[slot].endp,
INTERFACE_GET,
USB_REQ_GET_REPORT,
(USB_REPTYPE_FEATURE<<8) | 0xf2,
0x0,
17,
opbuf,
NULL, NULL);
}
static void request_data(int result, int count, void *arg)
{
int slot = (int)arg;
UsbControlTransfer(ds3_list[slot].endp,
INTERFACE_GET,
USB_REQ_GET_REPORT,
(USB_REPTYPE_INPUT<<8) | 0x01,
0x0,
DS3PS2_INPUT_LEN,
&gamepad[slot],
request_data_cb,
arg);
}
int ds3ps2_send_ledsrumble(int slot)
{
ledsrumble_buf[9] = led_pattern[ds3_list[slot].led];
ledsrumble_buf[1] = ds3_list[slot].rumble.time_r;
ledsrumble_buf[2] = ds3_list[slot].rumble.power_r;
ledsrumble_buf[3] = ds3_list[slot].rumble.time_l;
ledsrumble_buf[4] = ds3_list[slot].rumble.power_l;
return UsbControlTransfer(ds3_list[slot].endp,
INTERFACE_SET,
USB_REQ_SET_REPORT,
(USB_REPTYPE_OUTPUT<<8) | 0x01,
0x0,
sizeof(ledsrumble_buf),
ledsrumble_buf,
NULL, NULL);
}
void usb_bulk_reset(mass_dev* dev, int mode) {
int ret;
usb_callback_data cb_data;
iop_sema_t s;
s.initial = 0;
s.max = 1;
s.option = 0;
s.attr = 0;
cb_data.semh = CreateSema(&s);
//Call Bulk only mass storage reset
ret = UsbControlTransfer(
dev->controlEp, //default pipe
0x21, //bulk reset
0xFF,
0,
dev->interfaceNumber, //interface number
0, //length
NULL, //data
usb_callback,
(void*) &cb_data
);
if (ret != USB_RC_OK) {
printf("USBHDFSD: Error - sending reset %d\n", ret);
} else {
WaitSema(cb_data.semh);
//clear bulk-in endpoint
if (mode & 0x01) {
usb_bulk_clear_halt(dev, 0);
}
//clear bulk-out endpoint
if (mode & 0x02) {
usb_bulk_clear_halt(dev, 1);
}
}
DeleteSema(cb_data.semh);
}
/** Set the value in a 8bit register */
int setReg8(CAMERA_DEVICE *dev, unsigned char reg_id, unsigned char value)
{
int ret;
WaitSema(ps2cam_sema);
ret = UsbControlTransfer(dev->controll, USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1, 0, (unsigned short)reg_id, 1, &value, PS2CamCallback, (void*)ps2cam_sema);
if(ret != USB_RC_OK)
{
printf("UsbControlTransfer failed in 'setReg8'.\n");
ret = -1;
}
else
{
WaitSema(ps2cam_sema);
}
SignalSema(ps2cam_sema);
return ret;
}
void usb_getstring(int endp, int index, char *desc)
{
u8 *data;
string_descriptor *str;
int ret;
data = (u8 *) AllocSysMemory(0, sizeof(string_descriptor), NULL);
str = (string_descriptor *) data;
if(data != NULL)
{
str->desc = desc;
ret = UsbControlTransfer(endp, 0x80, USB_REQ_GET_DESCRIPTOR, (USB_DT_STRING << 8) | index,
0, sizeof(string_descriptor) - 4, data, ps2kbd_getstring_set, data);
if(ret != USB_RC_OK)
{
printf("PS2KBD: Error sending string descriptor request\n");
FreeSysMemory(data);
}
}
}
static void usb_bulk_reset(mass_dev* dev, int mode) {
int ret;
usb_callback_data cb_data;
cb_data.semh = dev->ioSema;
//Call Bulk only mass storage reset
ret = UsbControlTransfer(
dev->controlEp, //default pipe
0x21, //bulk reset
0xFF,
0,
dev->interfaceNumber, //interface number
0, //length
NULL, //data
usb_callback,
(void*) &cb_data
);
if (ret == USB_RC_OK) {
WaitSema(cb_data.semh);
ret = cb_data.returnCode;
}
if(ret == USB_RC_OK) {
//clear bulk-in endpoint
if (mode & 0x01)
ret = usb_bulk_clear_halt(dev, USB_BLK_EP_IN);
}
if(ret == USB_RC_OK) {
//clear bulk-out endpoint
if (mode & 0x02)
ret = usb_bulk_clear_halt(dev, USB_BLK_EP_OUT);
}
if(ret != USB_RC_OK){
XPRINTF("USBHDFSD: Error - sending reset %d to device %d.\n", ret, dev->devId);
dev->status |= USBMASS_DEV_STAT_ERR;
}
}
void ps2kbd_config_set(int resultCode, int bytes, void *arg)
/* Called when we have finished choosing our configuration */
{
kbd_dev *dev;
if(resultCode != USB_RC_OK)
{
printf("PS2KEYBOARD: Configuration set error res %d, bytes %d, arg %p\n", resultCode, bytes, arg);
return;
}
//printf("PS2KEYBOARD: Configuration set res %d, bytes %d, arg %p\n", resultCode, bytes, arg);
/* Do a interrupt data transfer */
dev = (kbd_dev *) arg;
if(dev != NULL)
{
int ret;
ret = UsbControlTransfer(dev->configEndp, 0x21, USB_REQ_SET_IDLE, 0, dev->interfaceNo, 0, NULL, ps2kbd_idlemode_set, arg);
}
}
static int usb_bulk_get_max_lun(mass_dev* dev) {
int ret;
usb_callback_data cb_data;
char max_lun;
cb_data.semh = dev->ioSema;
//Call Bulk only mass storage reset
ret = UsbControlTransfer(
dev->controlEp, //default pipe
0xA1,
0xFE,
0,
dev->interfaceNumber, //interface number
1, //length
&max_lun, //data
usb_callback,
(void*) &cb_data
);
if (ret == USB_RC_OK) {
WaitSema(cb_data.semh);
ret = cb_data.returnCode;
}
if(ret == USB_RC_OK){
ret = max_lun;
} else {
//Devices that do not support multiple LUNs may STALL this command.
usb_bulk_clear_halt(dev, USB_BLK_EP_IN);
usb_bulk_clear_halt(dev, USB_BLK_EP_OUT);
ret = -ret;
}
return ret;
}
