//! @brief This function configures the endpoints of the device application.
//! This function is called when the set configuration request has been received.
//!
void usb_user_endpoint_init(uint8_t conf_nb)
{
#if (USB_HIGH_SPEED_SUPPORT==false)
(void)Usb_configure_endpoint(EP_HID_MOUSE_IN,
EP_ATTRIBUTES_1,
DIRECTION_IN,
EP_SIZE_1_FS,
SINGLE_BANK);
#else
if( Is_usb_full_speed_mode() )
{
(void)Usb_configure_endpoint(EP_HID_MOUSE_IN,
EP_ATTRIBUTES_1,
DIRECTION_IN,
EP_SIZE_1_FS,
SINGLE_BANK);
}else{
(void)Usb_configure_endpoint(EP_HID_MOUSE_IN,
EP_ATTRIBUTES_1,
DIRECTION_IN,
EP_SIZE_1_HS,
SINGLE_BANK);
}
#endif
}
//! @brief This function configures the endpoints of the device application.
//! This function is called when the set configuration request has been received.
//!
void usb_user_endpoint_init(U8 conf_nb)
{
ms_multiple_drive = false;
(void)Usb_configure_endpoint(EP_FC_IN,
EP_ATTRIBUTES_1,
DIRECTION_IN,
EP_SIZE_1,
SINGLE_BANK);
(void)Usb_configure_endpoint(EP_FC_OUT,
EP_ATTRIBUTES_2,
DIRECTION_OUT,
EP_SIZE_2,
SINGLE_BANK);
#if( EVK1101_CTRL_PANEL_PID==EVK1101_CTRL_PANEL_DEMO_HID_MS_PID )
(void)Usb_configure_endpoint(EP_MS_IN,
EP_ATTRIBUTES_3,
DIRECTION_IN,
EP_SIZE_3,
SINGLE_BANK);
(void)Usb_configure_endpoint(EP_MS_OUT,
EP_ATTRIBUTES_4,
DIRECTION_OUT,
EP_SIZE_4,
SINGLE_BANK);
#endif
}
//! @brief This function configures the endpoints of the device application.
//! This function is called when the set configuration request has been received.
//!
void usb_user_endpoint_init(uint8_t conf_nb)
{
ms_multiple_drive = false;
#if (USB_HIGH_SPEED_SUPPORT==true)
if( !Is_usb_full_speed_mode() )
{
(void)Usb_configure_endpoint(EP_MS_IN,
EP_ATTRIBUTES_1,
DIRECTION_IN,
EP_SIZE_1_HS,
DOUBLE_BANK);
(void)Usb_configure_endpoint(EP_MS_OUT,
EP_ATTRIBUTES_2,
DIRECTION_OUT,
EP_SIZE_2_HS,
DOUBLE_BANK);
return;
}
#endif
(void)Usb_configure_endpoint(EP_MS_IN,
EP_ATTRIBUTES_1,
DIRECTION_IN,
EP_SIZE_1_FS,
DOUBLE_BANK);
(void)Usb_configure_endpoint(EP_MS_OUT,
EP_ATTRIBUTES_2,
DIRECTION_OUT,
EP_SIZE_2_FS,
DOUBLE_BANK);
}
//! @brief This function configures the endpoints of the device application.
//! This function is called when the set configuration request has been received.
//!
void usb_user_endpoint_init(U8 conf_nb)
{
(void)Usb_configure_endpoint(EP_HID_GENERIC_IN,
EP_ATTRIBUTES_1,
DIRECTION_IN,
EP_SIZE_1,
SINGLE_BANK);
(void)Usb_configure_endpoint(EP_HID_GENERIC_OUT,
EP_ATTRIBUTES_2,
DIRECTION_OUT,
EP_SIZE_2,
SINGLE_BANK);
}
//! usb_init_device
//!
//! This function initializes the USB device controller and
//! configures the Default Control Endpoint.
//!
//! @return Status
//!
Status_bool_t usb_init_device(void)
{
return Is_usb_id_device() && !Is_usb_endpoint_enabled(EP_CONTROL) &&
Usb_configure_endpoint(EP_CONTROL,
TYPE_CONTROL,
DIRECTION_OUT,
EP_CONTROL_LENGTH,
SINGLE_BANK);
}
//! @brief This function configures the endpoints of the device application.
//! This function is called when the set configuration request has been received.
//!
void usb_user_endpoint_init(uint8_t conf_nb)
{
(void)Usb_configure_endpoint( EP_KBD_IN,
TYPE_INTERRUPT,
DIRECTION_IN,
EP_SIZE_KBD,
SINGLE_BANK);
(void)Usb_configure_endpoint( EP_AUDIO_OUT,
EP_ATTRIBUTES_OUT,
DIRECTION_OUT,
EP_SIZE_OUT,
DOUBLE_BANK);
(void)Usb_configure_endpoint( EP_AUDIO_IN,
EP_ATTRIBUTES_IN,
DIRECTION_IN,
EP_SIZE_IN,
DOUBLE_BANK);
}
//! @brief This function configures the endpoints of the device application.
//! This function is called when the set configuration request has been received.
//!
void uac2_user_endpoint_init(U8 conf_nb)
{
if( Is_usb_full_speed_mode() ) {
(void)Usb_configure_endpoint(UAC2_EP_AUDIO_IN, EP_ATTRIBUTES_1, DIRECTION_IN, EP_SIZE_1_FS, DOUBLE_BANK, 0);
(void)Usb_configure_endpoint(UAC2_EP_AUDIO_OUT, EP_ATTRIBUTES_2, DIRECTION_OUT, EP_SIZE_2_FS, DOUBLE_BANK, 0);
(void)Usb_configure_endpoint(UAC2_EP_AUDIO_OUT_FB, EP_ATTRIBUTES_3, DIRECTION_IN, EP_SIZE_3_FS, DOUBLE_BANK, 0);
} else {
(void)Usb_configure_endpoint(UAC2_EP_AUDIO_IN, EP_ATTRIBUTES_1, DIRECTION_IN, EP_SIZE_1_HS, DOUBLE_BANK, 0);
(void)Usb_configure_endpoint(UAC2_EP_AUDIO_OUT, EP_ATTRIBUTES_2, DIRECTION_OUT, EP_SIZE_2_HS, DOUBLE_BANK, 0);
(void)Usb_configure_endpoint(UAC2_EP_AUDIO_OUT_FB, EP_ATTRIBUTES_3, DIRECTION_IN, EP_SIZE_3_HS, DOUBLE_BANK, 0);
}
}
//! @brief This function configures the endpoints of the device application.
//! This function is called when the set configuration request has been received.
//!
void usb_user_endpoint_init(U8 conf_nb)
{
#if (USB_HIGH_SPEED_SUPPORT==ENABLED)
if( !Is_usb_full_speed_mode() )
{
(void)Usb_configure_endpoint(INT_EP,
EP_ATTRIBUTES_3,
DIRECTION_IN,
EP_SIZE_3,
SINGLE_BANK);
(void)Usb_configure_endpoint(TX_EP,
EP_ATTRIBUTES_1,
DIRECTION_IN,
EP_SIZE_1_HS,
DOUBLE_BANK);
(void)Usb_configure_endpoint(RX_EP,
EP_ATTRIBUTES_2,
DIRECTION_OUT,
EP_SIZE_2_HS,
DOUBLE_BANK);
return;
}
#endif
(void)Usb_configure_endpoint(INT_EP,
EP_ATTRIBUTES_3,
DIRECTION_IN,
EP_SIZE_3,
SINGLE_BANK);
(void)Usb_configure_endpoint(TX_EP,
EP_ATTRIBUTES_1,
DIRECTION_IN,
EP_SIZE_1_FS,
DOUBLE_BANK);
(void)Usb_configure_endpoint(RX_EP,
EP_ATTRIBUTES_2,
DIRECTION_OUT,
EP_SIZE_2_FS,
DOUBLE_BANK);
}
//! This function manages the SET FEATURE request. The USB test modes are
//! supported by this function.
//!
void usb_set_feature(void)
{
U16 wValue = usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
U16 wIndex = usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
U16 wLength = usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
if (wLength)
goto unsupported_request;
if (bmRequestType==USB_SETUP_SET_STAND_DEVICE) {
#if (USB_REMOTE_WAKEUP_FEATURE == true)
if (FEATURE_DEVICE_REMOTE_WAKEUP == wValue)
{
device_status |= USB_DEV_STATUS_REMOTEWAKEUP;
remote_wakeup_feature = true;
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
return;
}
#endif
goto unsupported_request;
}
switch (wValue)
{
case FEATURE_ENDPOINT_HALT:
wIndex = Get_desc_ep_nbr(wIndex); // clear direction flag
if (bmRequestType != ENDPOINT_TYPE ||
wIndex == EP_CONTROL ||
!Is_usb_endpoint_enabled(wIndex))
goto unsupported_request;
Usb_enable_stall_handshake(wIndex);
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
break;
#if (USB_HIGH_SPEED_SUPPORT==true)
case FEATURE_TEST_MODE:
if (bmRequestType != DEVICE_TYPE ||
wIndex & 0x00FF)
goto unsupported_request;
switch (wIndex >> 8)
{
case TEST_J:
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
Wr_bitfield(AVR32_USBB_udcon, AVR32_USBB_UDCON_SPDCONF_MASK, 2);
Set_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_TSTJ_MASK);
break;
case TEST_K:
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
Wr_bitfield(AVR32_USBB_udcon, AVR32_USBB_UDCON_SPDCONF_MASK, 2);
Set_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_TSTK_MASK);
break;
case TEST_SE0_NAK:
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
Wr_bitfield(AVR32_USBB_udcon, AVR32_USBB_UDCON_SPDCONF_MASK, 2);
break;
case TEST_PACKET:
{
static const U8 test_packet[] =
{
// 00000000 * 9
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// 01010101 * 8
0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
// 01110111 * 8
0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
// 0, {111111S * 15}, 111111
0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
// S, 111111S, {0111111S * 7}
0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
// 00111111, {S0111111 * 9}, S0
0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
};
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
Wr_bitfield(AVR32_USBB_udcon, AVR32_USBB_UDCON_SPDCONF_MASK, 2);
Usb_disable_endpoint(EP_CONTROL);
Usb_unallocate_memory(EP_CONTROL);
(void)Usb_configure_endpoint(EP_CONTROL,
TYPE_BULK,
DIRECTION_IN,
64,
SINGLE_BANK);
Usb_reset_endpoint(EP_CONTROL);
Set_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_TSTPCKT_MASK);
usb_write_ep_txpacket(EP_CONTROL, &test_packet, sizeof(test_packet), NULL);
Usb_send_in(EP_CONTROL);
}
break;
case TEST_FORCE_ENABLE: // Only for downstream facing hub ports
default:
goto unsupported_request;
}
break;
#endif
case FEATURE_DEVICE_REMOTE_WAKEUP:
default:
goto unsupported_request;
}
return;
unsupported_request:
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
}
