/* EditorDisplay
* This function does the work of drawing your
* object on the frame editor. In this example,
* the Icon.png file is simply drawn to the
* frame, but you can change this to draw
* anything you want.
*/
void MMF2Func EditorDisplay(mv *mV, OI *oi, LO *lo, SerializedED *SED, RECT *rect)
{
#ifndef RUN_ONLY
cSurface *Surface = WinGetSurface(int(mV->mvIdEditWin)); //get access to the frame editor surface
if(!Surface) return; //failure
SDK->Icon->Blit(*Surface, rect->left, rect->top, BMODE_TRANSP, BOP_COPY, 0); //copy the icon onto the frame editor surface
#endif
}
void WINAPI DLLExport EditorDisplay(mv _far *mV, fpObjInfo oiPtr, fpLevObj loPtr, LPEDATA edPtr, RECT FAR *rc)
{
#ifndef RUN_ONLY
LPSURFACE Surface = WinGetSurface((int) mV->mvIdEditWin);
if (!Surface)
return;
SDK->Icon->Blit(*Surface, rc->left, rc->top, BMODE_TRANSP, BOP_COPY, 0);
#endif // !defined(RUN_ONLY)
}
void WINAPI DLLExport EditorDisplay(mv _far *mV, fpObjInfo oiPtr, fpLevObj loPtr, LPEDATA edPtr, RECT FAR *rc)
{
#ifndef RUN_ONLY
LPSURFACE ps = WinGetSurface((int)mV->mvIdEditWin);
if ( ps != NULL ) // Do the following if this surface exists
{
int x = rc->left; // get our boundaries
int y = rc->top;
int w = rc->right-rc->left;
int h = rc->bottom-rc->top;
cSurface is;
is.Create(edPtr->swidth, edPtr->sheight, ps);
is.Fill( (COLORREF)0 );
/*is.Line(0,0,w,h,1,DARK_GRAY);
is.Line(0,h,w,0,1,DARK_GRAY);
is.Rectangle(0,0,w,h,NULL,1,DARK_GRAY,false);*/
cSurface imageSurface;
::LockImageSurface( mV->mvIdAppli, edPtr->imageFrames[0], imageSurface, LOCKIMAGE_READBLITONLY );
int width = !edPtr->direction ? imageSurface.GetWidth() : edPtr->swidth;
int height = edPtr->direction ? imageSurface.GetHeight() : edPtr->sheight;
imageSurface.Stretch(
is,
is.GetWidth()/2 - width/2,
is.GetHeight()/2 - height/2,
width,
height,
0,0,
imageSurface.GetWidth(),
imageSurface.GetHeight(),
BMODE_OPAQUE, BOP_COPY, 0, imageSurface.HasAlpha() ? STRF_COPYALPHA : 0 );
::UnlockImageSurface( imageSurface );
is.Blit(*ps, x, y, BMODE_TRANSP, BOP_COPY);
}
#endif // !defined(RUN_ONLY)
}
void CheckSurfaceRecreation(LPRDATA rdPtr)
{
fprh rhPtr = rdPtr->rHo.hoAdRunHeader;
LPSURFACE ps = WinGetSurface((int)rhPtr->rhIdEditWin);
LPSURFACE pProto = NULL;
ParallaxFrame current = *rdPtr->currentPframe;
//Recreate surface if nessecary.
if( (rdPtr->direction == HORIZONTAL && rdPtr->rHo.hoImgWidth != rdPtr->oldWidth) ||
(rdPtr->direction == VERTICAL && rdPtr->rHo.hoImgHeight != rdPtr->oldHeight) ||
(rdPtr->finalImage == NULL)
)
{
if( rdPtr->finalImage != NULL )
{
rdPtr->finalImage->Delete();
delete rdPtr->finalImage;
}
rdPtr->finalImage = new cSurface();
if ( GetSurfacePrototype( &pProto, ps->GetDepth(), ST_MEMORY, SD_DIB) )
{
int newWidth = (rdPtr->direction == HORIZONTAL) ? rdPtr->rHo.hoImgWidth : current.parallaxImage->GetWidth();
int newHeight = (rdPtr->direction == HORIZONTAL) ? current.parallaxImage->GetHeight() : rdPtr->rHo.hoImgHeight;
rdPtr->finalImage->Create(newWidth, newHeight, pProto);
if( !rdPtr->finalImage->IsValid() )
{
rdPtr->finalImage->Delete();
delete rdPtr->finalImage;
}
}
}
rdPtr->oldWidth = rdPtr->rHo.hoImgWidth;
rdPtr->oldHeight = rdPtr->rHo.hoImgHeight;
}
short WINAPI DLLExport CreateRunObject(LPRDATA rdPtr, LPEDATA edPtr, fpcob cobPtr)
{
// Do some rSDK stuff
#include "rCreateRunObject.h"
#ifdef _DEBUG
AllocConsole();
freopen("conin$", "r", stdin);
freopen("conout$", "w", stdout);
freopen("conout$", "w", stderr);
printf("TILEMAPVIEWPORT DEBUG MODE");
#ifdef HWABETA
printf(" (HWA)");
#endif
printf("\n");
#endif
LPRH rhPtr = rdPtr->rHo.hoAdRunHeader;
rdPtr->isHwa = rhPtr->rh4.rh4Mv->mvCallFunction(NULL, EF_ISHWA, 0, 0, 0) != 0;
rdPtr->isUnicode = rhPtr->rh4.rh4Mv->mvCallFunction(NULL, EF_ISUNICODE, 0, 0, 0) != 0;
rdPtr->rHo.hoImgWidth = edPtr->width;
rdPtr->rHo.hoImgHeight = edPtr->height;
rdPtr->rc.rcChanged = true;
// No parent by default...
rdPtr->p = 0;
// Create surface, get MMF depth..
cSurface * ps = WinGetSurface((int)rdPtr->rHo.hoAdRunHeader->rhIdEditWin);
rdPtr->depth = ps->GetDepth();
rdPtr->surface = 0;
#ifndef HWABETA
/* Non-transparent surfaces are rendered to an opaque viewport surface so
that
the tiles do not have to be redrawn every single frame.
*/
if (!edPtr->transparent) {
cSurface * proto;
GetSurfacePrototype(&proto, rdPtr->depth, ST_MEMORY, SD_DIB);
rdPtr->surface = new cSurface;
rdPtr->surface->Create(rdPtr->rHo.hoImgWidth, rdPtr->rHo.hoImgHeight, proto);
}
#endif
// Animation settings
rdPtr->lastTick = GetTickCount();
rdPtr->animMode = edPtr->animMode;
for (int i = 0; i < 255; ++i) {
memset(&rdPtr->anim[i], 0, sizeof(Animation));
rdPtr->anim[i].width = 1;
rdPtr->anim[i].height = 1;
rdPtr->anim[i].speed = 8.0f;
}
rdPtr->animTime = 0;
// HWA blit flags
rdPtr->blitFlags = edPtr->resample ? STRF_RESAMPLE : 0;
// Background settings
rdPtr->transparent = edPtr->transparent;
rdPtr->background = edPtr->background;
rdPtr->accurateClip = edPtr->accurateClip;
// Layer stuff
rdPtr->minLayer = edPtr->minLayer;
rdPtr->maxLayer = edPtr->maxLayer;
// Misc
rdPtr->outsideColl = edPtr->outsideColl;
rdPtr->fineColl = edPtr->fineColl;
rdPtr->zoomColl = !edPtr->unscaledColl;
memset(&rdPtr->collMargin, 0, sizeof(RECT));
// Camera/drawing
rdPtr->zoom = 1.0f;
rdPtr->zoomPointX = 0.0f;
rdPtr->zoomPointY = 0.0f;
rdPtr->cameraX = 0;
rdPtr->cameraY = 0;
rdPtr->autoScroll = edPtr->autoScroll;
// Initialize callbacks
rdPtr->tileCallback.use = false;
rdPtr->tileCallback.settings = 0;
rdPtr->tileCallback.tile = 0;
rdPtr->layerCallback.use = false;
rdPtr->layerCallback.settings = 0;
// Overlap stuff
rdPtr->ovlpFilterCount = 0;
return 0;
}
void WINAPI DLLExport EditorDisplay(mv _far * mV, fpObjInfo oiPtr, fpLevObj loPtr,
LPEDATA edPtr, RECT FAR * rc)
{
#ifndef RUN_ONLY
LPSURFACE ps = WinGetSurface((int)mV->mvIdEditWin);
if (ps != NULL) // Do the following if this surface exists
{
// ps->SetClipRect(rc->left, rc->top, rc->right-rc->left,
// rc->bottom-rc->top);
// Prevent the user from having a seizure
// srand((long)mV->mvEditFrame + edPtr->width + edPtr->height);
// Get surfaces of tilesets
// cSurface surfs[TILESETCOUNT];
// for (int i = 0; i < edPtr->tilesetCount; ++i)
//{
// LockImageSurface(mV->mvIdAppli, edPtr->tilesets[i], surfs[i]);
//}
// Draw opaque background
if (!edPtr->transparent)
ps->Rectangle(rc->left, rc->top, rc->right, rc->bottom, edPtr->background, 0, 0, 1);
//// For each tile
// if (edPtr->tileWidth > 0 && edPtr->tileHeight > 0)
//{
// for (int x = rc->left; x <= rc->right; x += edPtr->tileWidth)
// {
// for (int y = rc->top; y <= rc->bottom; y +=
// edPtr->tileHeight)
// {
// // Draw a random tile
// if (edPtr->tilesetCount)
// {
// int tileset = 0;
// //int tileset = rand() %
// edPtr->tilesetCount;
// int tx = rand() %
//(surfs[tileset].GetWidth()
///
// edPtr->tileWidth);
// int ty = rand() %
//(surfs[tileset].GetHeight()
///
// edPtr->tileHeight);
// surfs[tileset].Blit(*ps, x, y,
// tx*edPtr->tileWidth,
// ty*edPtr->tileHeight, edPtr->tileWidth, edPtr->tileHeight,
// BMODE_TRANSP, BOP_COPY);
// }
// // Draw grid
// else
// {
// ps->Rectangle(x, y,
// x+edPtr->tileWidth+1,
// y+edPtr->tileHeight+1,
// 1, 0x999999);
// }
// }
// }
//}
// Draw border
ps->Rectangle(rc->left, rc->top, rc->right, rc->bottom, 1, OPAQUE_BLACK);
ps->ClearClipRect();
// Unlock stuff
// for (int i = 0; i < edPtr->tilesetCount; ++i)
//{
// UnlockImageSurface(surfs[i]);
//}
}
#endif // !RUN_ONLY
}
void LoadImageFile(LPRDATA rdPtr, LPSTR pFileName)
{
LPRH rhPtr = rdPtr->rHo.hoAdRunHeader;
HANDLE hf = INVALID_HANDLE_VALUE;
do {
if ( pFileName == NULL || *pFileName == 0 )
break;
// Copy filename to temp buffer
char fname[MAX_PATH];
strcpy(fname, pFileName);
// Get surface prototype
LPSURFACE wSurf = WinGetSurface((int)rhPtr->rhIdEditWin);
LPSURFACE proto;
GetSurfacePrototype(&proto, (wSurf != NULL) ? wSurf->GetDepth() : 24, ST_MEMORYWITHDC, SD_DIB);
if ( proto == NULL )
break;
// Ask MMF2 to open the file (opens external file and embedded files, and downloads files in Vitalize mode)
DWORD dwSize;
hf = rhPtr->rh4.rh4Mv->mvOpenHFile(fname, &dwSize, 0);
if ( hf == INVALID_HANDLE_VALUE )
break;
// Create CInpuBufFile object associated with the file handle
DWORD dwOff = File_GetPosition((HFILE)hf);
CInputBufFile bf;
if ( bf.Create((HFILE)hf, dwOff, dwSize) != 0 )
break;
// Create surface
cSurface* psf = NewSurface();
if ( psf == NULL )
break;
psf->Create(4, 4, proto);
psf->Fill(RGB(0,0,0));
if ( psf->GetDepth() == 8 )
psf->SetPalette (*wSurf);
// Load picture
CImageFilterMgr* pImgMgr = rhPtr->rh4.rh4Mv->mvImgFilterMgr;
if ( ImportImageFromInputFile(pImgMgr, &bf, psf, NULL, IMPORT_IMAGE_USESURFACEDEPTH | IMPORT_IMAGE_USESURFACEPALETTE) )
{
// Copy filename if file successfully loaded
strcpy(rdPtr->sFilename, fname);
rdPtr->nWidth = rdPtr->rHo.hoImgWidth = psf->GetWidth();
rdPtr->nHeight = rdPtr->rHo.hoImgHeight = psf->GetHeight();
// Replace picture surface
if ( rdPtr->pSf != NULL )
DeleteSurface(rdPtr->pSf);
rdPtr->pSf = psf;
// Free collision mask
FreeColMask(rdPtr);
// Set transparent color
if ( psf->GetTransparentColor() == RGB(0,0,0) )
{
COLORREF trspColor = rdPtr->dwTranspColor;
if ( (rdPtr->dwOptions & SPICTFLAGS_TRANSP_FIRSTPIXEL) != 0 )
psf->GetPixel(0,0,trspColor);
psf->SetTransparentColor(trspColor);
}
}
else
DeleteSurface(psf);
} while(FALSE);
// Close picture file (opened with mvOpenHFile)
if ( hf != INVALID_HANDLE_VALUE )
rhPtr->rh4.rh4Mv->mvCloseHFile(hf);
}
//cSurface* WINAPI DLLExport GetRunObjectSurface(LPRDATA rdPtr)
short WINAPI DLLExport DisplayRunObject(LPRDATA rdPtr)
{
MaskChanged();
if(rdPtr->dispTarget)
{
rdPtr->currentId = rdPtr->targetId;
CurrentImg = TargetImg;
}
if(!CurrentImg)
{
rdPtr->rHo.hoImgWidth = 0;
rdPtr->rHo.hoImgHeight = 0;
return 0;
}
//Get scaled size of the surface
int scaleW = CurrentImg->GetWidth()*abs(rdPtr->rc.rcScaleX);
int scaleH = CurrentImg->GetHeight()*abs(rdPtr->rc.rcScaleY);
//Object is too small
if(scaleW <= 0 || scaleH <= 0)
{
rdPtr->rHo.hoImgWidth = 0;
rdPtr->rHo.hoImgHeight = 0;
rdPtr->rHo.hoImgXSpot = 0;
rdPtr->rHo.hoImgYSpot = 0;
return 0;
}
// Begin render process...
LPRH rhPtr = rdPtr->rHo.hoAdRunHeader;
LPSURFACE ps = WinGetSurface((int)rhPtr->rhIdEditWin);
cSurface* renderImage = CurrentImg;
// On-screen coords
int screenX = rdPtr->rHo.hoX - rhPtr->rhWindowX;
int screenY = rdPtr->rHo.hoY - rhPtr->rhWindowY;
// Pure HWA blitting, yay!
#ifdef HWABETA
if (rdPtr->isHWA)// && CurrentImg->GetType() >= ST_HWA_RTTEXTURE)
{
DWORD flags = 0;
// Rotate quality 1
if (rdPtr->rc.rcAngle && rdPtr->rs.rsFlags & RSFLAG_ROTATE_ANTIA)
flags |= BLTF_ANTIA;
// Scale quality 1
if ((rdPtr->rc.rcScaleX != 1.0f || rdPtr->rc.rcScaleY != 1.0f) && rdPtr->rs.rsFlags & RSFLAG_SCALE_RESAMPLE)
flags |= BLTF_ANTIA;
// Hot spot (transform center)
POINT point = {ImageS(rdPtr->currentId)->hotX, ImageS(rdPtr->currentId)->hotY};
CurrentImg->BlitEx(*ps, screenX, screenY,
rdPtr->rc.rcScaleX, rdPtr->rc.rcScaleY, 0, 0,
CurrentImg->GetWidth(), CurrentImg->GetHeight(), &point, rdPtr->rc.rcAngle,
(rdPtr->rs.rsEffect & EFFECTFLAG_TRANSPARENT) ? BMODE_TRANSP : BMODE_OPAQUE,
BlitOp(rdPtr->rs.rsEffect & EFFECT_MASK),
rdPtr->rs.rsEffectParam, flags);
return 0;
}
#endif
// Software blit: Offset draw position by transformed hotspot
screenX -= rdPtr->rHo.hoImgXSpot;
screenY -= rdPtr->rHo.hoImgYSpot;
// Temporary surface for transformations
cSurface temp;
//Need scaling
if(rdPtr->rc.rcScaleX != 1.0 || rdPtr->rc.rcScaleY != 1.0)
{
temp.Create(scaleW, scaleH, renderImage);
renderImage->Stretch(temp, 0, 0, scaleW, scaleH, BMODE_OPAQUE, BOP_COPY, 0,
((rdPtr->rs.rsFlags&RSFLAG_SCALE_RESAMPLE)?STRF_RESAMPLE:0)|STRF_COPYALPHA);
//Mirror for negative values.
if(rdPtr->rc.rcScaleX < 0)
temp.ReverseX();
if(rdPtr->rc.rcScaleY < 0)
temp.ReverseY();
// For now, the scaled image is the 'final' one
renderImage = &temp;
}
//Need rotation
if(rdPtr->rc.rcAngle)
{
cSurface rotateBuffer;
rotateBuffer.Clone(*renderImage);
rotateBuffer.CreateRotatedSurface(temp, rdPtr->rc.rcAngle,
rdPtr->rs.rsFlags & RSFLAG_ROTATE_ANTIA, CurrentImg->GetTransparentColor(), TRUE);
renderImage = &temp;
}
if (renderImage && renderImage->IsValid())
{
rdPtr->rHo.hoImgWidth = renderImage->GetWidth();
rdPtr->rHo.hoImgHeight = renderImage->GetHeight();
renderImage->Blit(
*ps,
screenX,
screenY,
0, 0,
renderImage->GetWidth(),
renderImage->GetHeight(),
(rdPtr->rs.rsEffect & EFFECTFLAG_TRANSPARENT) ? BMODE_TRANSP : BMODE_OPAQUE,
BlitOp(rdPtr->rs.rsEffect & EFFECT_MASK),
rdPtr->rs.rsEffectParam
);
//Update window
RECT rect;
rect.left = screenX;
rect.top = screenY;
rect.right = screenX + renderImage->GetWidth();
rect.bottom = screenY + renderImage->GetHeight();
//ps->Rectangle(rect.left, rect.top, rect.right, rect.bottom, RED, 0, 0, TRUE);
WinAddZone(rhPtr->rhIdEditWin, &rect);
}
return 0;
}
short WINAPI DLLExport CreateRunObject(LPRDATA rdPtr, LPEDATA edPtr, fpcob cobPtr)
{
// Do some rSDK stuff
#include "rCreateRunObject.h"
#ifdef _DEBUG
AllocConsole();
freopen("conin$","r",stdin);
freopen("conout$","w",stdout);
freopen("conout$","w",stderr);
#ifdef UNICODE
printf("Surface Unicode version\n");
#endif
#endif
srand(time(NULL));
LPRH rhPtr = rdPtr->rHo.hoAdRunHeader;
mv* mV = rdPtr->rHo.hoAdRunHeader->rh4.rh4Mv;
rdPtr->rHo.hoImgWidth = edPtr->width_def;
rdPtr->rHo.hoImgHeight = edPtr->height_def;
rdPtr->useAbs = edPtr->useAbs;
rdPtr->keepPoints = edPtr->keepPoints;
rdPtr->dispTarget = edPtr->dispTarget;
rdPtr->selectLast = edPtr->selectLast;
rdPtr->threadedIO = edPtr->threadedIO;
rdPtr->ioFile = 0;
//Font
rdPtr->hFont = 0;
memcpy(&rdPtr->textFont,&edPtr->textFont,sizeof(LOGFONT));
rdPtr->hFlags = edPtr->textFlags;
//Depth
rdPtr->depth = 24;
//Internal blending
rdPtr->b.mode = BMODE_TRANSP;
rdPtr->b.operation = BOP_COPY;
rdPtr->b.param = 0;
rdPtr->b.param = 0xffffffff;
rdPtr->b.flags = 0;
rdPtr->b.destX = 0;
rdPtr->b.destY = 0;
rdPtr->b.destW = 0;
rdPtr->b.destH = 0;
rdPtr->b.StretchMode = 0;
rdPtr->b.srcX = 0;
rdPtr->b.srcY = 0;
rdPtr->b.srcW = 0;
rdPtr->b.srcH = 0;
rdPtr->b.srcUse = false;
rdPtr->b.callback[0] = 0;
rdPtr->b.procOp[0] = 0;
rdPtr->b.procOpSrc = 1;
rdPtr->b.composeAlpha = false;
rdPtr->b.angle = 0;
rdPtr->b.angleResample = false;
rdPtr->b.hotX = 0;
rdPtr->b.hotY = 0;
rdPtr->b.hotspotMode = 1; // no longer possible to disable
rdPtr->blitStackCursor = -1;
//Current & target surfaces
rdPtr->targetId = -1;
rdPtr->target = 0;
rdPtr->currentId = -1;
rdPtr->current = 0;
rdPtr->lastId = -1;
rdPtr->targetValid = false;
//Default settings
rdPtr->transCol = BLACK;
//Collision mask and fill data
rdPtr->collision = 0;
rdPtr->fill = new FillDB;
//Polygon's points
rdPtr->points = new PolyPoints;
//Buffer
rdPtr->buffer = 0;
rdPtr->buffPitch = 0;
rdPtr->buffSurf = 0;
//Overlay
rdPtr->ovl = 0;
//Callback
rdPtr->colSrc = 0;
rdPtr->colDest = 0;
rdPtr->colNew = 0;
rdPtr->colAlphaSrc = 0;
rdPtr->colAlphaDest = 0;
rdPtr->colAlphaNew = 0;
rdPtr->callback = 0;
rdPtr->callX = 0;
rdPtr->callY = 0;
rdPtr->colAlphaRet = 0;
rdPtr->colRet = 0;
//Flood fill region
rdPtr->floodL = 0;
rdPtr->floodT = 0;
rdPtr->floodR = 0;
rdPtr->floodB = 0;
//I/O
rdPtr->ioHandle = 0;
//Quick store
rdPtr->stored = 0;
// Random color function
rdPtr->randomSeed = 0;
//Functions for extension integration
rdPtr->imageAt = GetImgAt;
rdPtr->imageCount = GetImgCount;
//Running HWA?
LPSURFACE wSurf = WinGetSurface((int)rhPtr->rhIdEditWin);
int nDrv = wSurf->GetDriver();
rdPtr->isHWA = nDrv >= SD_3DFX;
//Display surface not necessary by default
rdPtr->display = 0;
rdPtr->rc.rcAngle = 0;
rdPtr->rc.rcScaleX = 1.0f;
rdPtr->rc.rcScaleY = 1.0f;
//Images
rdPtr->surf = new ImageBank;
//Hotspot info
Img imgInfo;
//Prototype for new surfaces
cSurface *proto = 0;
if(edPtr->multiImg)
{
//First image empty
if(!edPtr->images[0]&&edPtr->loadFirst)
{
cSurface *tmp = new cSurface;
rdPtr->surf->push_back(new SImage(tmp));
//Empty image with size
if(edPtr->loadFirst)
{
GetSurfacePrototype(&proto,rdPtr->depth,ST_MEMORYWITHDC,SD_DIB);
tmp->Create(edPtr->width,edPtr->height,proto);
tmp->Fill(BLACK);
}
rdPtr->targetId = rdPtr->currentId = rdPtr->lastId = 0;
TargetImg = CurrentImg = tmp;
rdPtr->targetValid = true;
}
for(int i=0;i<edPtr->imageCount;i++)
{
//Get surface prototype on first loop
if(!i)
GetSurfacePrototype(&proto,rdPtr->depth,ST_MEMORYWITHDC,SD_DIB);
//Valid image? Load
if(edPtr->images[i])
{
cSurface is, *tmp = new cSurface;
GetImageInfos(rhPtr->rhIdAppli,edPtr->images[i],&imgInfo);
rdPtr->surf->push_back(new SImage(tmp,true,imgInfo.imgXSpot,imgInfo.imgYSpot));
LockImageSurface(rhPtr->rhIdAppli,edPtr->images[i],is);
if(is.GetWidth())
{
if(!i)
{
rdPtr->targetId = 0;
TargetImg = tmp;
rdPtr->lastId = rdPtr->targetId;
rdPtr->targetValid = true;
if(edPtr->loadFirst)
{
rdPtr->currentId = rdPtr->targetId;
CurrentImg = TargetImg;
}
}
tmp->Create(is.GetWidth(),is.GetHeight(),proto);
tmp->SetTransparentColor(is.GetTransparentColor());
is.Blit(*tmp,0,0,BMODE_OPAQUE,BOP_COPY,0,BLTF_COPYALPHA);
}
else if(!i&&edPtr->loadFirst)
{
rdPtr->targetId = rdPtr->currentId = 0;
TargetImg = CurrentImg = 0;
rdPtr->lastId = rdPtr->targetId;
}
UnlockImageSurface(is);
}
//Add prototype if there's more than one empty image
else if(i&&edPtr->imageCount>1)
{
rdPtr->surf->push_back(new SImage(new cSurface));
}
}
}
//Single image
else
{
//First image is set
if(edPtr->images[0])
{
cSurface is, *tmp = new cSurface;
GetImageInfos(rhPtr->rhIdAppli,edPtr->images[0],&imgInfo);
rdPtr->surf->push_back(new SImage(tmp,true,imgInfo.imgXSpot,imgInfo.imgYSpot));
LockImageSurface(rhPtr->rhIdAppli,edPtr->images[0],is);
if(is.GetWidth())
{
GetSurfacePrototype(&proto,rdPtr->depth,ST_MEMORYWITHDC,SD_DIB);
rdPtr->targetId = rdPtr->currentId = rdPtr->lastId = 0;
TargetImg = CurrentImg = tmp;
tmp->Create(is.GetWidth(),is.GetHeight(),proto);
tmp->SetTransparentColor(is.GetTransparentColor());
is.Blit(*tmp);
}
UnlockImageSurface(is);
rdPtr->targetValid = true;
}
//Create empty image if wanted
else
{
cSurface *tmp = new cSurface;
rdPtr->surf->push_back(new SImage(tmp));
//Empty image with size
if(edPtr->loadFirst)
{
GetSurfacePrototype(&proto,rdPtr->depth,ST_MEMORYWITHDC,SD_DIB);
tmp->Create(edPtr->width,edPtr->height,proto);
tmp->Fill(BLACK);
}
rdPtr->targetId = rdPtr->currentId = rdPtr->lastId = 0;
TargetImg = CurrentImg = tmp;
rdPtr->targetValid = TargetImg->IsValid();
}
}
//Initialize information
if(rdPtr->current)
{
rdPtr->rHo.hoImgWidth = rdPtr->current->GetWidth();
rdPtr->rHo.hoImgHeight = rdPtr->current->GetHeight();
rdPtr->rHo.hoImgXSpot = ImageS(rdPtr->currentId)->hotX;
rdPtr->rHo.hoImgYSpot = ImageS(rdPtr->currentId)->hotY;
}
// No errors
return 0;
}
void WINAPI DLLExport EditorDisplay(mv _far *mV, fpObjInfo oiPtr, fpLevObj loPtr, LPEDATA edPtr, RECT FAR *rc)
{
#ifndef RUN_ONLY
// This is a simple case of drawing an image onto MMF's frame editor window
// First, we must get a pointer to the surface used by the frame editor
LPSURFACE ps = WinGetSurface((int)mV->mvIdEditWin);
if ( ps != NULL ) // Do the following if this surface exists
{
int x = rc->left;
int y = rc->top;
int w = rc->right-rc->left;
int h = rc->bottom-rc->top;
cSurface is; // New surface variable for us to use
is.Create(4, 4, ps); // Create a surface implementation from a prototype (frame editor win)
is.LoadImage(hInstLib, EXO_IMAGE, LI_NONE); // Load our bitmap from the resource,
COLORREF color;
is.GetPixel(0,0,color);
ps->Fill(x, y, w, h, color);
ps->Rectangle(x+4,y+4,rc->right-4,rc->bottom -4, (COLORREF)0x000000, 1, (COLORREF)0x000000, false);
ps->Rectangle(x,y,x+36,y+36,color,0,color,true);
ps->Line(rc->right-112,rc->bottom-5,rc->right-8,rc->bottom-5,1,color);
// This actually blits (or copies) the whole of our surface onto the frame editor's surface
// at a specified position.
// We could use different image effects when we copy, e.g. invert, AND, OR, XOR,
// blend (semi-transparent, the 6th param is amount of transparency)
// You can 'anti-alias' with the 7th param (default=0 or off)
is.Blit(*ps, x, y, BMODE_TRANSP, BOP_COPY, 0); // Blit the image to the frame editor surface!
// Create font
HFONT hFnt = NULL;
// Ink effects
BOOL bTransp = ((oiPtr->oiHdr.oiInkEffect & EFFECTFLAG_TRANSPARENT) != 0);
BlitMode bm = (bTransp) ? BMODE_TRANSP : BMODE_OPAQUE;
BOOL bAntiA = (oiPtr->oiHdr.oiInkEffect & EFFECTFLAG_ANTIALIAS) ? TRUE : FALSE;
BlitOp bo = (BlitOp)(oiPtr->oiHdr.oiInkEffect & EFFECT_MASK);
LPARAM boParam = oiPtr->oiHdr.oiInkEffectParam;
// Draw text
DWORD dwDTFlags = DT_RIGHT | DT_BOTTOM | DT_NOPREFIX | DT_SINGLELINE | DT_END_ELLIPSIS;
ps->DrawText("Exclusion Zone", 14, rc, dwDTFlags, 0x000000, hFnt,
bm, bo, boParam, bAntiA, 0UL,8UL);
// Delete font
if ( hFnt != NULL )
DeleteObject(hFnt);
}
#endif // !RUN_ONLY
}
