void GribRequestSetting::OnVpChange(PlugIn_ViewPort *vp)
{
if(!m_AllowSend) return;
SetVpSize(vp);
m_MailImage->SetValue( WriteMail() );
}
bool GribRequestSetting::MouseEventHook( wxMouseEvent &event )
{
if( m_ZoneSelMode == AUTO_SELECTION || m_ZoneSelMode == SAVED_SELECTION || m_ZoneSelMode == START_SELECTION ) return false;
if( event.Moving()) return false; //maintain status bar and tracking dialog updated
if( event.LeftDown() ) {
m_parent.pParent->SetFocus();
m_ZoneSelMode = DRAW_SELECTION; //restart a new drawing
m_parent.SetRequestBitmap( m_ZoneSelMode );
if( this->IsShown() ) this->Hide(); //eventually hide diaog in case of mode change
m_RenderZoneOverlay = 0; //eventually hide previous drawing
}
if( event.LeftUp () && m_RenderZoneOverlay == 2 ) {
m_ZoneSelMode = COMPLETE_SELECTION; //ask to complete selection
m_parent.SetRequestBitmap( m_ZoneSelMode );
SetCoordinatesText();
m_MailImage->SetValue( WriteMail() );
m_RenderZoneOverlay = 1;
}
if( event.Dragging() ) {
if( m_RenderZoneOverlay < 2 ) {
m_StartPoint = event.GetPosition(); //starting selection point
m_RenderZoneOverlay = 2;
}
m_IsMaxLong = m_StartPoint.x > event.GetPosition().x? true: false; //find if startpoint is max longitude
GetCanvasLLPix( m_Vp, event.GetPosition(), &m_Lat, &m_Lon); //extend selection
if( !m_tMouseEventTimer.IsRunning() ) m_tMouseEventTimer.Start( 20, wxTIMER_ONE_SHOT );
}
return true;
}
void GribRequestSetting::OnMovingClick( wxCommandEvent& event )
{
m_fgMovingParams->ShowItems( m_cMovingGribEnabled->IsChecked() && m_cMovingGribEnabled->IsShown() );
if(m_AllowSend) m_MailImage->SetValue( WriteMail() );
SetRequestDialogSize();
this->Refresh();
}
void GribRequestSetting::OnAnyChange(wxCommandEvent &event)
{
//permit to send a new message
m_MailImage->SetForegroundColour(wxColor( 0, 0, 0 ));
m_bSend->Show();
m_MailImage->SetLabel( WriteMail() );
Fit();
}
void GribRequestSetting::OnCoordinatesChange( wxSpinEvent& event )
{
SetCoordinatesText();
StopGraphicalZoneSelection(); //eventually stop graphical zone display
if( !m_AllowSend ) return;
m_MailImage->SetValue( WriteMail() );
}
void GribRequestSetting::OnAnyChange(wxCommandEvent &event)
{
m_fgAltitudeData->ShowItems(m_pAltitudeData->IsChecked());
m_pWModel->Show( IsZYGRIB && m_pWaves->IsChecked());
if(m_AllowSend) m_MailImage->SetValue( WriteMail() );
SetMailImageSize();
}
void GribRequestSetting::OnModelChange(wxCommandEvent &event)
{
ApplyRequestConfig( m_pModel->GetCurrentSelection(), m_pResolution->GetCurrentSelection() );
//permit to send a new message
m_MailImage->SetForegroundColour(wxColor( 0, 0, 0 ));
m_bSend->Show();
m_MailImage->SetLabel( WriteMail() );
Fit();
}
void GribRequestSetting::OnTopChange(wxCommandEvent &event)
{
ApplyRequestConfig( m_pResolution->GetCurrentSelection(), m_pInterval->GetCurrentSelection(), m_pTimeRange->GetCurrentSelection() );
m_cMovingGribEnabled->Show( m_pMailTo->GetCurrentSelection() == SAILDOCS );
if(m_AllowSend) m_MailImage->SetValue( WriteMail() );
SetMailImageSize();
}
void GribRequestSetting::OnTimeRangeChange(wxCommandEvent &event)
{
m_pWModel->Show( IsZYGRIB && m_pWaves->IsChecked());
if( m_pModel->GetCurrentSelection() == 0 ) { //gfs
if( m_pTimeRange->GetCurrentSelection() > 6 ) { //time range more than 8 days
m_pWaves->SetValue(0);
m_pWaves->Enable(false);
OCPNMessageBox_PlugIn(this, _("You request a forecast for more than 8 days horizon.\nThis is conflicting with Wave data which will be removed from your request.\nDon't forget that beyond the first 8 days, the resolution will be only 2.5\u00B0x2.5\u00B0\nand the time intervall 12 hours."),
_("Warning!") );
} else
m_pWaves->Enable(true);
}
if(m_AllowSend) m_MailImage->SetValue( WriteMail() );
SetRequestDialogSize();
}
void GribRequestSetting::InitRequestConfig()
{
long i,j;
( (wxString) m_RequestConfigBase.GetChar(2) ).ToLong( &i );
( (wxString) m_RequestConfigBase.GetChar(3) ).ToLong( &j );
ApplyRequestConfig( i, j );
( (wxString) m_RequestConfigBase.GetChar(4) ).ToLong( &j );
m_pInterval->SetSelection( j );
( (wxString) m_RequestConfigBase.GetChar(5) ).ToLong( &j );
m_pTimeRange->SetSelection( j );
m_pWind->Enable( false );
m_pPress->Enable( false );
m_MailImage->SetLabel( WriteMail() );
Fit();
}
void GribRequestSetting::SetVpSize(PlugIn_ViewPort *vp)
{
double lonmax= vp->lon_max;
double lonmin= vp->lon_min;
if( ( fabs(vp->lat_max ) < 90. ) && ( fabs( lonmax ) < 360. ) ) {
if( lonmax < -180. ) lonmax += 360.;
if( lonmax > 180. ) lonmax -= 360.;
}
if( ( fabs( vp->lat_min ) < 90. ) && ( fabs( lonmin ) < 360. ) ) {
if( lonmin < -180. ) lonmin += 360.;
if( lonmin > 180. ) lonmin -= 360.;
}
m_spMaxLat->SetValue( (int) ceil( vp->lat_max) );
m_spMinLon->SetValue( (int) floor(lonmin) );
m_spMinLat->SetValue( (int) floor(vp->lat_min) );
m_spMaxLon->SetValue( (int) ceil(lonmax) );
SetCoordinatesText();
m_MailImage->SetValue( WriteMail() );
}
void GribRequestSetting::OnZoneSelectionModeChange( wxCommandEvent& event )
{
StopGraphicalZoneSelection(); //eventually stop graphical zone display
if( !m_ZoneSelMode )
SetVpSize( m_Vp ); //recompute zone
if( event.GetId() == MANSELECT ) {
//set temporarily zone selection mode if manual selection set, put it directly in "drawing" position
//else put it in "auto selection position
m_ZoneSelMode = m_cManualZoneSel->GetValue() ? DRAW_SELECTION : AUTO_SELECTION;
m_cUseSavedZone->SetValue( false );
} else if(event.GetId() == SAVEDZONE ) {
//set temporarily zone selection mode if saved selection set, put it directly in "no selection" position
//else put it directly in "drawing" position
m_ZoneSelMode = m_cUseSavedZone->GetValue()? SAVED_SELECTION : DRAW_SELECTION;
}
m_parent.SetRequestBitmap( m_ZoneSelMode ); //set appopriate bitmap
fgZoneCoordinatesSizer->ShowItems( m_ZoneSelMode != AUTO_SELECTION ); //show coordinate if necessary
m_cUseSavedZone->Show( m_ZoneSelMode != AUTO_SELECTION );
if(m_AllowSend) m_MailImage->SetValue( WriteMail() );
SetRequestDialogSize();
}
void GribRequestSetting::OnSendMaiL( wxCommandEvent& event )
{
wxMailMessage *message = new wxMailMessage(
wxT("Grib-Request"),
m_MailAdressBase, //to ( saildoc request adresse )
WriteMail() //message
);
wxEmail mail ;
m_MailImage->SetForegroundColour(wxColor( 255, 0, 0 ));
if(mail.Send( *message ) ) {
#ifdef __WXMSW__
m_MailImage->SetLabel(
_("Your request is ready. An eMail is prepared in your eMail environment. \nYou have just to click 'send' to send it...\nSave or Cancel to finish...or new parameters for a new eMail ...") );
#else
m_MailImage->SetLabel(
_("Your request was sent \n(if your system has an MTA configured and is able to send eMail).\nSave or Cancel to finish...or new parameters for a new eMail ..."));
#endif
} else {
m_MailImage->SetLabel(
_("Request can't be sent. Please verify your eMail systeme parameters.\nYou should also have a look at your log file.\nSave or Cancel to finish..."));
}
m_bSend->Hide();
Fit();
}
void GribRequestSetting::OnSendMaiL( wxCommandEvent& event )
{
if(!m_AllowSend) {
m_rButtonCancel->Show();
m_rButtonApply->Show();
m_rButtonYes->SetLabel(_("Send"));
m_MailImage->SetForegroundColour(wxColor( 0, 0, 0 )); //permit to send a (new) message
m_AllowSend = true;
m_MailImage->SetValue( WriteMail() );
SetMailImageSize();
return;
}
const wxString error[] = { _T("\n\n"), _("Before sending an email to Zygrib you have to enter your Login and Code.\nPlease visit www.zygrib.org/ and follow instructions..."),
_("The file size limit is overcome!\nYou can zoom in and/or change parameters...") };
m_MailImage->SetForegroundColour(wxColor( 255, 0, 0 ));
m_AllowSend = false;
if( m_MailError_Nb ) {
// m_MailImage->SetForegroundColour(wxColor( 255, 0, 0 ));
if( m_MailError_Nb == 3 )
m_MailImage->SetValue( error[1] + error[0] + error[2] );
else
m_MailImage->SetValue( error[m_MailError_Nb] );
m_rButtonCancel->Hide();
m_rButtonApply->Hide();
m_rButtonYes->SetLabel(_("Continue..."));
SetMailImageSize();
return;
}
wxMailMessage *message = new wxMailMessage(
wxT("gribauto"), //requested subject
(m_pMailTo->GetCurrentSelection() == SAILDOCS) ? m_MailToAddresses.BeforeFirst(_T(';')) //to request address
: m_MailToAddresses.AfterFirst(_T(';')),
WriteMail(), //message image
m_pSenderAddress->GetValue()
);
wxEmail mail ;
if(mail.Send( *message, m_SendMethod)) {
#ifdef __WXMSW__
m_MailImage->SetValue(
_("Your request is ready. An email is prepared in your email environment. \nYou have just to verify and send it...\nSave or Cancel to finish...or Continue...") );
#else
if(m_SendMethod == 0 ) {
m_MailImage->SetValue(
_("Your request is ready. An email is prepared in your email environment. \nYou have just to verify and send it...\nSave or Cancel to finish...or Continue...") );
} else {
m_MailImage->SetValue(
_("Your request was sent \n(if your system has an MTA configured and is able to send email).\nSave or Cancel to finish...or Continue...") );
}
#endif
} else {
m_MailImage->SetValue(
_("Request can't be sent. Please verify your email systeme parameters.\nYou should also have a look at your log file.\nSave or Cancel to finish..."));
m_rButtonYes->Hide();
}
m_rButtonYes->SetLabel(_("Continue..."));
SetMailImageSize();
}
//----------------------------------------------------------------------------------------------------------
// GRIB Request Implementation
//----------------------------------------------------------------------------------------------------------
void GribRequestSetting::InitRequestConfig()
{
DimeWindow( this ); //aplly global colours scheme
wxFileConfig *pConf = GetOCPNConfigObject();
if(pConf) {
pConf->SetPath ( _T( "/PlugIns/GRIB" ) );
wxString l;
int m;
pConf->Read ( _T( "MailRequestConfig" ), &m_RequestConfigBase, _T( "000220XX........0" ) );
pConf->Read ( _T( "MailSenderAddress" ), &l, _T("") );
m_pSenderAddress->ChangeValue( l );
pConf->Read ( _T( "MailRequestAddresses" ), &m_MailToAddresses, _T("[email protected];[email protected]") );
pConf->Read ( _T( "ZyGribLogin" ), &l, _T("") );
m_pLogin->ChangeValue( l );
pConf->Read ( _T( "ZyGribCode" ), &l, _T("") );
m_pCode->ChangeValue( l );
pConf->Read ( _T( "SendMailMethod" ), &m_SendMethod, 0 );
pConf->Read ( _T( "MovingGribSpeed" ), &m, 0 );
m_sMovingSpeed->SetValue( m );
pConf->Read ( _T( "MovingGribCourse" ), &m, 0 );
m_sMovingCourse->SetValue( m );
//if GriDataConfig has been corrupted , take the standard one to fix a crash
if( m_RequestConfigBase.Len() != wxString (_T( "000220XX.............." ) ).Len() )
m_RequestConfigBase = _T( "000220XX.............." );
}
//populate model, mail to, waves model choices
wxString s1[] = {_T("GFS"),_T("COAMPS"),_T("RTOFS")};
for( unsigned int i= 0; i<(sizeof(s1) / sizeof(wxString));i++)
m_pModel->Append( s1[i] );
wxString s2[] = {_T("Saildocs"),_T("zyGrib")};
for( unsigned int i= 0; i<(sizeof(s2) / sizeof(wxString));i++)
m_pMailTo->Append( s2[i] );
wxString s3[] = {_T("WW3-GLOBAL"),_T("WW3-MEDIT")};
for( unsigned int i= 0; i<(sizeof(s3) / sizeof(wxString));i++)
m_pWModel->Append( s3[i] );
m_rButtonYes->SetLabel(_("Send"));
m_rButtonApply->SetLabel(_("Save"));
m_tResUnit->SetLabel(wxString::Format( _T("\u00B0")));
m_sCourseUnit->SetLabel(wxString::Format( _T("\u00B0")));
//add tooltips
m_pSenderAddress->SetToolTip(_("Address used to send request eMail. (Mandatory for LINUX)"));
m_pLogin->SetToolTip(_("This is your zyGrib's forum access Login"));
m_pCode->SetToolTip(_("Get this Code in zyGrib's forum ( This is not your password! )"));
m_sMovingSpeed->SetToolTip(_("Enter your forescasted Speed (in Knots)"));
m_sMovingCourse->SetToolTip(_("Enter your forecasted Course"));
long i,j,k;
( (wxString) m_RequestConfigBase.GetChar(0) ).ToLong( &i ); //MailTo
m_pMailTo->SetSelection(i);
( (wxString) m_RequestConfigBase.GetChar(1) ).ToLong( &i ); //Model
m_pModel->SetSelection(i);
m_cMovingGribEnabled->SetValue(m_RequestConfigBase.GetChar(16) == 'X' );//Moving Grib
( (wxString) m_RequestConfigBase.GetChar(2) ).ToLong( &i ); //Resolution
( (wxString) m_RequestConfigBase.GetChar(3) ).ToLong( &j ); //interval
( (wxString) m_RequestConfigBase.GetChar(4) ).ToLong( &k, 16 ); //Time Range
k--; // range max = 2 to 16 stored in hexa from 1 to f
#ifdef __WXMSW__ //show / hide sender elemants as necessary
m_pSenderSizer->ShowItems(false);
#else
if(m_SendMethod == 0 )
m_pSenderSizer->ShowItems(false);
else
m_pSenderSizer->ShowItems(true); //possibility to use "sendmail" method with Linux
#endif
ApplyRequestConfig( i, j ,k);
( (wxString) m_RequestConfigBase.GetChar(5) ).ToLong( &j ); //Waves model
m_pWModel->SetSelection( j );
m_pWind->Enable( false ); //always selected if available
m_pPress->Enable( false );
m_AllowSend = true;
m_MailImage->SetValue( WriteMail() );
SetMailImageSize();
}
void GribRequestSetting::InitRequestConfig()
{
wxFileConfig *pConf = GetOCPNConfigObject();
if(pConf) {
pConf->SetPath ( _T( "/PlugIns/GRIB" ) );
wxString l;
int m;
pConf->Read ( _T( "MailRequestConfig" ), &m_RequestConfigBase, _T( "000220XX........0" ) );
pConf->Read ( _T( "MailSenderAddress" ), &l, _T("") );
m_pSenderAddress->ChangeValue( l );
pConf->Read ( _T( "MailRequestAddresses" ), &m_MailToAddresses, _T("[email protected];[email protected]") );
pConf->Read ( _T( "ZyGribLogin" ), &l, _T("") );
m_pLogin->ChangeValue( l );
pConf->Read ( _T( "ZyGribCode" ), &l, _T("") );
m_pCode->ChangeValue( l );
pConf->Read ( _T( "SendMailMethod" ), &m_SendMethod, 0 );
pConf->Read ( _T( "MovingGribSpeed" ), &m, 0 );
m_sMovingSpeed->SetValue( m );
pConf->Read ( _T( "MovingGribCourse" ), &m, 0 );
m_sMovingCourse->SetValue( m );
m_cManualZoneSel->SetValue( m_SavedZoneSelMode != AUTO_SELECTION ); //has been read in GriUbICtrlBar dialog implementation or updated previously
m_cUseSavedZone->SetValue( m_SavedZoneSelMode == SAVED_SELECTION );
fgZoneCoordinatesSizer->ShowItems( m_SavedZoneSelMode != AUTO_SELECTION );
m_cUseSavedZone->Show( m_SavedZoneSelMode != AUTO_SELECTION );
if( m_cManualZoneSel->GetValue() ) {
pConf->Read ( _T( "RequestZoneMaxLat" ), &m, 0 );
m_spMaxLat->SetValue( m );
pConf->Read ( _T( "RequestZoneMinLat" ), &m, 0 );
m_spMinLat->SetValue( m );
pConf->Read ( _T( "RequestZoneMaxLon" ), &m, 0 );
m_spMaxLon->SetValue( m );
pConf->Read ( _T( "RequestZoneMinLon" ), &m, 0 );
m_spMinLon->SetValue( m );
SetCoordinatesText();
}
//if GriDataConfig has been corrupted , take the standard one to fix a crash
if( m_RequestConfigBase.Len() != wxString (_T( "000220XX.............." ) ).Len() )
m_RequestConfigBase = _T( "000220XX.............." );
}
//populate model, mail to, waves model choices
wxString s1[] = {_T("GFS"),_T("COAMPS"),_T("RTOFS")};
for( unsigned int i= 0; i<(sizeof(s1) / sizeof(wxString));i++)
m_pModel->Append( s1[i] );
wxString s2[] = {_T("Saildocs"),_T("zyGrib")};
for( unsigned int i= 0; i<(sizeof(s2) / sizeof(wxString));i++)
m_pMailTo->Append( s2[i] );
wxString s3[] = {_T("WW3-GLOBAL"),_T("WW3-MEDIT")};
for( unsigned int i= 0; i<(sizeof(s3) / sizeof(wxString));i++)
m_pWModel->Append( s3[i] );
m_rButtonYes->SetLabel(_("Send"));
m_rButtonApply->SetLabel(_("Save"));
m_tResUnit->SetLabel(wxString::Format( _T("\u00B0")));
m_sCourseUnit->SetLabel(wxString::Format( _T("\u00B0")));
//Set wxSpinCtrl sizing
int w,h;
GetTextExtent( _T("-360"), &w, &h, 0, 0, OCPNGetFont(_("Dialog"), 10)); // optimal text control size
w += 30;
h += 4;
m_sMovingSpeed->SetMinSize( wxSize(w, h) );
m_sMovingCourse->SetMinSize( wxSize(w, h) );
m_spMaxLat->SetMinSize( wxSize(w, h) );
m_spMinLat->SetMinSize( wxSize(w, h) );
m_spMaxLon->SetMinSize( wxSize(w, h) );
m_spMinLon->SetMinSize( wxSize(w, h) );
//add tooltips
m_pSenderAddress->SetToolTip(_("Address used to send request eMail. (Mandatory for LINUX)"));
m_pLogin->SetToolTip(_("This is your zyGrib's forum access Login"));
m_pCode->SetToolTip(_("Get this Code in zyGrib's forum ( This is not your password! )"));
m_sMovingSpeed->SetToolTip(_("Enter your forescasted Speed (in Knots)"));
m_sMovingCourse->SetToolTip(_("Enter your forecasted Course"));
long i,j,k;
( (wxString) m_RequestConfigBase.GetChar(0) ).ToLong( &i ); //MailTo
m_pMailTo->SetSelection(i);
( (wxString) m_RequestConfigBase.GetChar(1) ).ToLong( &i ); //Model
m_pModel->SetSelection(i);
m_cMovingGribEnabled->SetValue(m_RequestConfigBase.GetChar(16) == 'X' );//Moving Grib
( (wxString) m_RequestConfigBase.GetChar(2) ).ToLong( &i ); //Resolution
( (wxString) m_RequestConfigBase.GetChar(3) ).ToLong( &j ); //interval
( (wxString) m_RequestConfigBase.GetChar(4) ).ToLong( &k, 16 ); //Time Range
k--; // range max = 2 to 16 stored in hexa from 1 to f
#ifdef __WXMSW__ //show / hide sender elemants as necessary
m_pSenderSizer->ShowItems(false);
#else
if(m_SendMethod == 0 )
m_pSenderSizer->ShowItems(false);
else
m_pSenderSizer->ShowItems(true); //possibility to use "sendmail" method with Linux
#endif
m_tMouseEventTimer.Connect(wxEVT_TIMER, wxTimerEventHandler( GribRequestSetting::OnMouseEventTimer ), NULL, this);
m_RenderZoneOverlay = 0;
ApplyRequestConfig( i, j ,k);
( (wxString) m_RequestConfigBase.GetChar(5) ).ToLong( &j ); //Waves model
m_pWModel->SetSelection( j );
m_pWind->Enable( false ); //always selected if available
m_pPress->Enable( false );
DimeWindow( this ); //aplly global colours scheme
m_AllowSend = true;
m_MailImage->SetValue( WriteMail() );
}
void GribRequestSetting::OnSendMaiL( wxCommandEvent& event )
{
StopGraphicalZoneSelection(); //eventually stop graphical zone display
if(!m_AllowSend) {
m_rButtonCancel->Show();
m_rButtonApply->Show();
m_rButtonYes->SetLabel(_("Send"));
m_MailImage->SetForegroundColour(wxColor( 0, 0, 0 )); //permit to send a (new) message
m_AllowSend = true;
m_MailImage->SetValue( WriteMail() );
SetRequestDialogSize();
return;
}
const wxString error[] = { _T("\n\n"), _("Before sending an email to Zygrib you have to enter your Login and Code.\nPlease visit www.zygrib.org/ and follow instructions..."),
_("Too big file! zyGrib limit is 2Mb!"), _("Error! Max Lat lower than Min Lat or Max Lon lower than Min Lon!"),
_("Too large area! Each side must be less than 180\u00B0!"), _("Too small area for this resolution!") };
::wxBeginBusyCursor();
m_MailImage->SetForegroundColour(wxColor( 255, 0, 0 ));
m_AllowSend = false;
if( m_MailError_Nb ) {
if( m_MailError_Nb > 7 ) {
m_MailImage->SetValue( error[1] + error[0] + error[m_MailError_Nb - 6] );
} else {
if( m_MailError_Nb == 6 ) m_MailError_Nb = 1;
m_MailImage->SetValue( error[m_MailError_Nb] );
}
m_rButtonCancel->Hide();
m_rButtonApply->Hide();
m_rButtonYes->SetLabel(_("Continue..."));
m_rButton->Layout();
SetRequestDialogSize();
::wxEndBusyCursor();
return;
}
wxMailMessage *message = new wxMailMessage(
wxT("gribauto"), //requested subject
(m_pMailTo->GetCurrentSelection() == SAILDOCS) ? m_MailToAddresses.BeforeFirst(_T(';')) //to request address
: m_MailToAddresses.AfterFirst(_T(';')),
WriteMail(), //message image
m_pSenderAddress->GetValue()
);
wxEmail mail ;
if(mail.Send( *message, m_SendMethod)) {
#ifdef __WXMSW__
m_MailImage->SetValue(
_("Your request is ready. An email is prepared in your email environment. \nYou have just to verify and send it...\nSave or Cancel to finish...or Continue...") );
#else
if(m_SendMethod == 0 ) {
m_MailImage->SetValue(
_("Your request is ready. An email is prepared in your email environment. \nYou have just to verify and send it...\nSave or Cancel to finish...or Continue...") );
} else {
m_MailImage->SetValue(
_("Your request was sent \n(if your system has an MTA configured and is able to send email).\nSave or Cancel to finish...or Continue...") );
}
#endif
} else {
m_MailImage->SetValue(
_("Request can't be sent. Please verify your email systeme parameters.\nYou should also have a look at your log file.\nSave or Cancel to finish..."));
m_rButtonYes->Hide();
}
m_rButtonYes->SetLabel(_("Continue..."));
m_rButton->Layout();
SetRequestDialogSize();
::wxEndBusyCursor();
}