void setup_rx_bds(xemacpsif_s *xemacpsif, XEmacPs_BdRing *rxring)
{
XEmacPs_Bd *rxbd;
XStatus status;
struct pbuf *p;
u32_t freebds;
u32_t bdindex;
u32_t *temp;
u32_t index = 0;
if (xemacpsif->emacps.Config.BaseAddress != XPAR_XEMACPS_0_BASEADDR) {
index = sizeof(s32_t) * XLWIP_CONFIG_N_RX_DESC;
}
freebds = XEmacPs_BdRingGetFreeCnt (rxring);
while (freebds > 0) {
freebds--;
p = pbuf_alloc(PBUF_RAW, XEMACPS_MAX_FRAME_SIZE, PBUF_POOL);
if (!p) {
#if LINK_STATS
lwip_stats.link.memerr++;
lwip_stats.link.drop++;
#endif
printf("unable to alloc pbuf in recv_handler\r\n");
return;
}
status = XEmacPs_BdRingAlloc(rxring, 1, &rxbd);
if (status != XST_SUCCESS) {
LWIP_DEBUGF(NETIF_DEBUG, ("setup_rx_bds: Error allocating RxBD\r\n"));
pbuf_free(p);
return;
}
status = XEmacPs_BdRingToHw(rxring, 1, rxbd);
if (status != XST_SUCCESS) {
LWIP_DEBUGF(NETIF_DEBUG, ("Error committing RxBD to hardware: "));
if (status == XST_DMA_SG_LIST_ERROR)
LWIP_DEBUGF(NETIF_DEBUG, ("XST_DMA_SG_LIST_ERROR: this function was called out of sequence with XEmacPs_BdRingAlloc()\r\n"));
else
LWIP_DEBUGF(NETIF_DEBUG, ("set of BDs was rejected because the first BD did not have its start-of-packet bit set, or the last BD did not have its end-of-packet bit set, or any one of the BD set has 0 as length value\r\n"));
pbuf_free(p);
XEmacPs_BdRingUnAlloc(rxring, 1, rxbd);
return;
}
Xil_DCacheInvalidateRange((u32_t)p->payload, (u32_t)XEMACPS_MAX_FRAME_SIZE);
bdindex = XEMACPS_BD_TO_INDEX(rxring, rxbd);
temp = (u32_t *)rxbd;
*temp = 0;
if (bdindex == (XLWIP_CONFIG_N_RX_DESC - 1)) {
*temp = 0x00000002;
}
temp++;
*temp = 0;
XEmacPs_BdSetAddressRx(rxbd, (u32_t)p->payload);
rx_pbufs_storage[index + bdindex] = (s32_t)p;
}
}
void setup_rx_bds(XEmacPs_BdRing *rxring)
{
XEmacPs_Bd *rxbd;
XStatus Status;
struct pbuf *p;
unsigned int FreeBds;
unsigned int BdIndex;
unsigned int *Temp;
FreeBds = XEmacPs_BdRingGetFreeCnt (rxring);
while (FreeBds > 0) {
FreeBds--;
Status = XEmacPs_BdRingAlloc(rxring, 1, &rxbd);
if (Status != XST_SUCCESS) {
LWIP_DEBUGF(NETIF_DEBUG, ("setup_rx_bds: Error allocating RxBD\r\n"));
return;
}
BdIndex = XEMACPS_BD_TO_INDEX(rxring, rxbd);
Temp = (unsigned int *)rxbd;
*Temp = 0;
if (BdIndex == (XLWIP_CONFIG_N_RX_DESC - 1)) {
*Temp = 0x00000002;
}
Temp++;
*Temp = 0;
p = pbuf_alloc(PBUF_RAW, XEMACPS_MAX_FRAME_SIZE, PBUF_POOL);
if (!p) {
#if LINK_STATS
lwip_stats.link.memerr++;
lwip_stats.link.drop++;
#endif
LWIP_DEBUGF(NETIF_DEBUG, ("unable to alloc pbuf in recv_handler\r\n"));
XEmacPs_BdRingUnAlloc(rxring, 1, rxbd);
dsb();
return;
}
XEmacPs_BdSetAddressRx(rxbd, (u32)p->payload);
dsb();
rx_pbufs_storage[BdIndex] = (int)p;
Status = XEmacPs_BdRingToHw(rxring, 1, rxbd);
if (Status != XST_SUCCESS) {
LWIP_DEBUGF(NETIF_DEBUG, ("Error committing RxBD to hardware: "));
if (Status == XST_DMA_SG_LIST_ERROR)
LWIP_DEBUGF(NETIF_DEBUG, ("XST_DMA_SG_LIST_ERROR: this function was called out of sequence with XEmacPs_BdRingAlloc()\r\n"));
else
LWIP_DEBUGF(NETIF_DEBUG, ("set of BDs was rejected because the first BD did not have its start-of-packet bit set, or the last BD did not have its end-of-packet bit set, or any one of the BD set has 0 as length value\r\n"));
return;
}
}
}
XStatus init_dma(struct xemac_s *xemac)
{
XEmacPs_Bd bdtemplate;
XEmacPs_BdRing *rxringptr, *txringptr;
XEmacPs_Bd *rxbd;
struct pbuf *p;
XStatus status;
s32_t i;
u32_t bdindex;
volatile u32_t tempaddress;
xemacpsif_s *xemacpsif = (xemacpsif_s *)(xemac->state);
struct xtopology_t *xtopologyp = &xtopology[xemac->topology_index];
/*
* The BDs need to be allocated in uncached memory. Hence the 1 MB
* address range allocated for Bd_Space is made uncached
* by setting appropriate attributes in the translation table.
* The Bd_Space is aligned to 1MB and has a size of 1 MB. This ensures
* a reserved uncached area used only for BDs.
*/
if (bd_space_attr_set == 0) {
Xil_SetTlbAttributes((s32_t)bd_space, 0xc02); // addr, attr
bd_space_attr_set = 1;
}
rxringptr = &XEmacPs_GetRxRing(&xemacpsif->emacps);
txringptr = &XEmacPs_GetTxRing(&xemacpsif->emacps);
LWIP_DEBUGF(NETIF_DEBUG, ("rxringptr: 0x%08x\r\n", rxringptr));
LWIP_DEBUGF(NETIF_DEBUG, ("txringptr: 0x%08x\r\n", txringptr));
/* Allocate 64k for Rx and Tx bds each to take care of extreme cases */
tempaddress = (u32_t)&(bd_space[bd_space_index]);
xemacpsif->rx_bdspace = (void *)tempaddress;
bd_space_index += 0x10000;
tempaddress = (u32_t)&(bd_space[bd_space_index]);
xemacpsif->tx_bdspace = (void *)tempaddress;
bd_space_index += 0x10000;
LWIP_DEBUGF(NETIF_DEBUG, ("rx_bdspace: 0x%08x\r\n", xemacpsif->rx_bdspace));
LWIP_DEBUGF(NETIF_DEBUG, ("tx_bdspace: 0x%08x\r\n", xemacpsif->tx_bdspace));
if (!xemacpsif->rx_bdspace || !xemacpsif->tx_bdspace) {
xil_printf("%s@%d: Error: Unable to allocate memory for TX/RX buffer descriptors",
__FILE__, __LINE__);
return ERR_IF;
}
/*
* Setup RxBD space.
*
* Setup a BD template for the Rx channel. This template will be copied to
* every RxBD. We will not have to explicitly set these again.
*/
XEmacPs_BdClear(&bdtemplate);
/*
* Create the RxBD ring
*/
status = XEmacPs_BdRingCreate(rxringptr, (u32) xemacpsif->rx_bdspace,
(u32) xemacpsif->rx_bdspace, BD_ALIGNMENT,
XLWIP_CONFIG_N_RX_DESC);
if (status != XST_SUCCESS) {
LWIP_DEBUGF(NETIF_DEBUG, ("Error setting up RxBD space\r\n"));
return ERR_IF;
}
status = XEmacPs_BdRingClone(rxringptr, &bdtemplate, XEMACPS_RECV);
if (status != XST_SUCCESS) {
LWIP_DEBUGF(NETIF_DEBUG, ("Error initializing RxBD space\r\n"));
return ERR_IF;
}
XEmacPs_BdClear(&bdtemplate);
XEmacPs_BdSetStatus(&bdtemplate, XEMACPS_TXBUF_USED_MASK);
/*
* Create the TxBD ring
*/
status = XEmacPs_BdRingCreate(txringptr, (u32) xemacpsif->tx_bdspace,
(u32) xemacpsif->tx_bdspace, BD_ALIGNMENT,
XLWIP_CONFIG_N_TX_DESC);
if (status != XST_SUCCESS) {
return ERR_IF;
}
/* We reuse the bd template, as the same one will work for both rx and tx. */
status = XEmacPs_BdRingClone(txringptr, &bdtemplate, XEMACPS_SEND);
if (status != XST_SUCCESS) {
return ERR_IF;
}
/*
* Allocate RX descriptors, 1 RxBD at a time.
*/
for (i = 0; i < XLWIP_CONFIG_N_RX_DESC; i++) {
p = pbuf_alloc(PBUF_RAW, XEMACPS_MAX_FRAME_SIZE, PBUF_POOL);
if (!p) {
#if LINK_STATS
lwip_stats.link.memerr++;
lwip_stats.link.drop++;
#endif
printf("unable to alloc pbuf in init_dma\r\n");
return ERR_IF;
}
status = XEmacPs_BdRingAlloc(rxringptr, 1, &rxbd);
if (status != XST_SUCCESS) {
LWIP_DEBUGF(NETIF_DEBUG, ("init_dma: Error allocating RxBD\r\n"));
pbuf_free(p);
return ERR_IF;
}
/* Enqueue to HW */
status = XEmacPs_BdRingToHw(rxringptr, 1, rxbd);
if (status != XST_SUCCESS) {
LWIP_DEBUGF(NETIF_DEBUG, ("Error: committing RxBD to HW\r\n"));
pbuf_free(p);
XEmacPs_BdRingUnAlloc(rxringptr, 1, rxbd);
return ERR_IF;
}
Xil_DCacheInvalidateRange((u32_t)p->payload, (u32_t)XEMACPS_MAX_FRAME_SIZE);
XEmacPs_BdSetAddressRx(rxbd, (u32_t)p->payload);
bdindex = XEMACPS_BD_TO_INDEX(rxringptr, rxbd);
rx_pbufs_storage[bdindex] = (s32_t)p;
}
/*
* Connect the device driver handler that will be called when an
* interrupt for the device occurs, the handler defined above performs
* the specific interrupt processing for the device.
*/
XScuGic_RegisterHandler(INTC_BASE_ADDR, xtopologyp->scugic_emac_intr,
(Xil_ExceptionHandler)XEmacPs_IntrHandler,
(void *)&xemacpsif->emacps);
/*
* Enable the interrupt for emacps.
*/
XScuGic_EnableIntr(INTC_DIST_BASE_ADDR, (u32) xtopologyp->scugic_emac_intr);
emac_intr_num = (u32) xtopologyp->scugic_emac_intr;
return 0;
}
