int __cdecl _eof (
int filedes
)
{
__int64 here;
__int64 end;
int retval;
_CHECK_FH_CLEAR_OSSERR_RETURN( filedes, EBADF, -1 );
_VALIDATE_CLEAR_OSSERR_RETURN((filedes >= 0 && (unsigned)filedes < (unsigned)_nhandle), EBADF, -1);
_VALIDATE_CLEAR_OSSERR_RETURN((_osfile(filedes) & FOPEN), EBADF, -1);
/* Lock the file */
_lock_fh(filedes);
__try {
if ( _osfile(filedes) & FOPEN ) {
/* See if the current position equals the end of the file. */
if ( ((here = _lseeki64_nolock(filedes, 0i64, SEEK_CUR)) == -1i64) ||
((end = _lseeki64_nolock(filedes, 0i64, SEEK_END)) == -1i64) )
retval = -1;
else if ( here == end )
retval = 1;
else {
_lseeki64_nolock(filedes, here, SEEK_SET);
retval = 0;
}
}
else {
errno = EBADF;
_doserrno = 0;
retval = -1;
_ASSERTE(("Invalid file descriptor. File possibly closed by a different thread",0));
}
}
__finally {
/* Unlock the file */
_unlock_fh(filedes);
}
/* Done */
return(retval);
}
static int __cdecl common_fseek_nolock(
__crt_stdio_stream const stream,
__int64 offset,
int whence
) throw()
{
if (!stream.is_in_use())
{
errno = EINVAL;
return -1;
}
stream.unset_flags(_IOEOF);
if (common_fseek_binary_mode_read_only_fast_track_nolock(stream, offset, whence))
{
return 0;
}
// If seeking relative to the current location, then convert to a seek
// relative to the beginning of the file. This accounts for buffering,
// etc., by letting fseek() tell us where we are:
if (whence == SEEK_CUR)
{
offset += _ftelli64_nolock(stream.public_stream());
whence = SEEK_SET;
}
__acrt_stdio_flush_nolock(stream.public_stream());
// If the stream is opened in update mode and is currently in use for reading,
// the buffer must be abandoned to ensure consistency when transitioning from
// reading to writing.
// __acrt_stdio_flush_nolock will not reset the buffer when _IOWRITE flag
// is not set.
__acrt_stdio_reset_buffer(stream);
// If the file was opened for read/write, clear flags since we don't know
// what the user will do next with the file. If the file was opened for
// read only access, decrease the _bufsiz so that the next call to
// __acrt_stdio_refill_and_read_{narrow,wide}_nolock won't cost quite so
// much:
if (stream.has_all_of(_IOUPDATE))
{
stream.unset_flags(_IOWRITE | _IOREAD);
}
else if (stream.has_all_of(_IOREAD | _IOBUFFER_CRT) && !stream.has_any_of(_IOBUFFER_SETVBUF))
{
stream->_bufsiz = _SMALL_BUFSIZ;
}
if (_lseeki64_nolock(stream.lowio_handle(), offset, whence) == -1)
{
return -1;
}
return 0;
}
// If a binary mode stream is open for reading and the target of the requested
// seek is within the stream buffer, we can simply adjust the buffer pointer to
// the new location. This allows us to avoid flushing the buffer. If the user
// has set a large buffer on the stream and performs frequent seeks that are
// likely to result in targets within the buffer, this is a huge performance win.
// This function handles the most common cases.
static bool __cdecl common_fseek_binary_mode_read_only_fast_track_nolock(
__crt_stdio_stream const stream,
__int64 offset,
int whence
) throw()
{
// This fast-track path does not handle the seek-from-end case (this is not
// nearly as commonly used as seeking from the beginning or from the current
// position).
if (whence == SEEK_END)
{
return false;
}
// This fast-track path is only useful if the stream is buffered.
if (!stream.has_any_buffer())
{
return false;
}
// This fast-track path requires a stream opened only for reading. It may
// be possible to handle streams opened for writing or update similarly;
// further investigation would be required.
if (stream.has_any_of(_IOWRITE | _IOUPDATE))
{
return false;
}
// The ftell function handles a case where _cnt is negative. It isn't clear
// why _cnt may be negative, so if _cnt is negative, fall back to the
// expensive path.
if (stream->_cnt < 0)
{
return false;
}
// This fast-track path requires a binary mode file handle. When text mode
// or UTF transformations are enabled, the contents of the buffer do not
// exactly match the contents of the underlying file.
int const fh = stream.lowio_handle();
if ((_osfile(fh) & FTEXT) != 0 || _textmode(fh) != __crt_lowio_text_mode::ansi)
{
return false;
}
// Handle the SEEK_SET case by transforming the SEEK_SET offset into a
// SEEK_CUR offset:
if (whence == SEEK_SET)
{
__int64 const lowio_position = _lseeki64_nolock(fh, 0, SEEK_CUR);
if (lowio_position < 0)
{
return false;
}
__int64 const stdio_position = lowio_position - stream->_cnt;
if (FAILED(LongLongSub(offset, stdio_position, &offset)))
{
return false;
}
whence = SEEK_CUR;
}
// Compute the maximum number of bytes that we can seek in each direction
// within the buffer and verify that the requested offset is within that
// range. Note that the minimum reverse seek is a negative value.
__int64 const minimum_reverse_seek = -(stream->_ptr - stream->_base);
__int64 const maximum_forward_seek = stream->_cnt;
bool const seek_is_within_buffer = minimum_reverse_seek <= offset && offset <= maximum_forward_seek;
if (!seek_is_within_buffer)
{
return false;
}
stream->_ptr += offset;
// Note that the cast here is safe: The buffer will never be larger than
// INT_MAX bytes in size. The setvbuf function validates this constraint.
stream->_cnt -= static_cast<int>(offset);
return true;
}
/* now define version that doesn't lock/unlock, validate fh */
int __cdecl _read_nolock (
int fh,
void *inputbuf,
unsigned cnt
)
{
int bytes_read; /* number of bytes read */
char *buffer; /* buffer to read to */
int os_read; /* bytes read on OS call */
char *p, *q; /* pointers into buffer */
wchar_t *pu, *qu; /* wchar_t pointers into buffer for UTF16 */
char peekchr; /* peek-ahead character */
wchar_t wpeekchr; /* peek-ahead wchar_t */
__int64 filepos; /* file position after seek */
ULONG dosretval; /* o.s. return value */
char tmode; /* textmode - ANSI/UTF-8/UTF-16 */
void *buf; /* buffer to read to */
int retval = -2; /* return value */
unsigned inputsize = cnt;
/* validate fh */
_CHECK_FH_CLEAR_OSSERR_RETURN( fh, EBADF, -1 );
_VALIDATE_CLEAR_OSSERR_RETURN((fh >= 0 && (unsigned)fh < (unsigned)_nhandle), EBADF, -1);
_VALIDATE_CLEAR_OSSERR_RETURN((_osfile(fh) & FOPEN), EBADF, -1);
bytes_read = 0; /* nothing read yet */
if (cnt == 0 || (_osfile(fh) & FEOFLAG)) {
/* nothing to read or at EOF, so return 0 read */
return 0;
}
_VALIDATE_CLEAR_OSSERR_RETURN( (inputbuf != NULL), EINVAL, -1 );
tmode = _textmode(fh);
switch(tmode) {
case __IOINFO_TM_UTF8 :
/* For a UTF-8 file, we need 2 buffers, because after reading we
need to convert it into UNICODE - MultiByteToWideChar doesn't do
in-place conversions. */
/* MultiByte To WideChar conversion may double the size of the
buffer required & hence we divide cnt by 2 */
/*
* Since we are reading UTF8 stream, cnt bytes read may vary
* from cnt wchar_t characters to cnt/4 wchar_t characters. For
* this reason if we need to read cnt characters, we will
* allocate MBCS buffer of cnt. In case cnt is 0, we will
* have 4 as minimum value. This will make sure we don't
* overflow for reading from pipe case.
*
*
* In this case the numbers of wchar_t characters that we can
* read is cnt/2. This means that the buffer size that we will
* require is cnt/2.
*/
/* For UTF8 we want the count to be an even number */
_VALIDATE_CLEAR_OSSERR_RETURN(((cnt & 1) == 0), EINVAL, -1);
cnt = (cnt/2) < 4 ? 4 : (cnt/2);
buf = _malloc_crt(cnt);
if(!buf) {
errno = ENOMEM;
_doserrno = E_nomem;
return -1;
}
break;
case __IOINFO_TM_UTF16LE :
/* For UTF16 the count always needs to be an even number */
_VALIDATE_CLEAR_OSSERR_RETURN(((cnt & 1) == 0), EINVAL, -1);
cnt &= (~1);
/* Fall Through to default */
default :
/* For non-UTF8 files, we need only 1 buffer - make buf point to
the users input buffer */
buf = inputbuf;
}
buffer = buf;
if ((_osfile(fh) & (FPIPE|FDEV)) && _pipech(fh) != LF && cnt != 0) {
/* a pipe/device and pipe lookahead non-empty: read the lookahead
* char */
*buffer++ = _pipech(fh);
++bytes_read;
--cnt;
_pipech(fh) = LF; /* mark as empty */
/* For UTF16, there maybe one more look ahead char. For UTF8,
there maybe 2 more look ahead chars */
if((tmode != __IOINFO_TM_ANSI) && (_pipech2(fh)[0] != LF) && cnt != 0) {
*buffer++ = _pipech2(fh)[0];
++bytes_read;
--cnt;
_pipech2(fh)[0] = LF; /* mark as empty */
if((tmode == __IOINFO_TM_UTF8) && (_pipech2(fh)[1] != LF) && cnt != 0) {
*buffer++ = _pipech2(fh)[1];
++bytes_read;
--cnt;
_pipech2(fh)[1] = LF; /* mark as empty */
}
}
}
/* read the data */
if ( !ReadFile( (HANDLE)_osfhnd(fh), buffer, cnt, (LPDWORD)&os_read,
NULL ) || os_read < 0 || (size_t)os_read > cnt)
{
/* ReadFile has reported an error. recognize two special cases.
*
* 1. map ERROR_ACCESS_DENIED to EBADF
*
* 2. just return 0 if ERROR_BROKEN_PIPE has occurred. it
* means the handle is a read-handle on a pipe for which
* all write-handles have been closed and all data has been
* read. */
if ( (dosretval = GetLastError()) == ERROR_ACCESS_DENIED ) {
/* wrong read/write mode should return EBADF, not EACCES */
errno = EBADF;
_doserrno = dosretval;
retval = -1;
goto error_return;
}
else if ( dosretval == ERROR_BROKEN_PIPE ) {
retval = 0;
goto error_return;
}
else {
_dosmaperr(dosretval);
retval = -1;
goto error_return;
}
}
bytes_read += os_read; /* update bytes read */
if (_osfile(fh) & FTEXT) {
/* now must translate CR-LFs to LFs in the buffer */
/* For ANSI & UTF8, we read byte by byte.
For UTF16, we need to read 2 bytes (wchar_t's) at a time */
if(tmode != __IOINFO_TM_UTF16LE) {
/* set CRLF flag to indicate LF at beginning of buffer */
if ( (os_read != 0) && (*(char *)buf == LF) )
_osfile(fh) |= FCRLF;
else
_osfile(fh) &= ~FCRLF;
/* convert chars in the buffer: p is src, q is dest */
p = q = buf;
while (p < (char *)buf + bytes_read) {
if (*p == CTRLZ) {
/* if fh is not a device, set ctrl-z flag */
if ( !(_osfile(fh) & FDEV) )
_osfile(fh) |= FEOFLAG;
else
*q++ = *p++;
break; /* stop translating */
}
else if (*p != CR)
*q++ = *p++;
else {
/* *p is CR, so must check next char for LF */
if (p < (char *)buf + bytes_read - 1) {
if (*(p+1) == LF) {
p += 2;
*q++ = LF; /* convert CR-LF to LF */
}
else
*q++ = *p++; /* store char normally */
}
else {
/* This is the hard part. We found a CR at end of
buffer. We must peek ahead to see if next char
is an LF. */
++p;
dosretval = 0;
if ( !ReadFile( (HANDLE)_osfhnd(fh), &peekchr, 1,
(LPDWORD)&os_read, NULL ) )
dosretval = GetLastError();
if (dosretval != 0 || os_read == 0) {
/* couldn't read ahead, store CR */
*q++ = CR;
}
else {
/*
* peekchr now has the extra character -- we now
* have several possibilities:
*
* 1. disk file and char is not LF; just seek
* back and copy CR
* 2. disk file and char is LF; seek back and
* discard CR
* 3. disk file, char is LF but this is a
* one-byte read: store LF, don't seek back
* 4. pipe/device and char is LF; store LF.
* 5. pipe/device and char isn't LF, store CR
* and put char in pipe lookahead buffer.
*/
if (_osfile(fh) & (FDEV|FPIPE)) {
/* non-seekable device */
if (peekchr == LF)
*q++ = LF;
else {
*q++ = CR;
_pipech(fh) = peekchr;
}
}
else {
/* disk file */
if (q == buf && peekchr == LF) {
/* nothing read yet; must make some
progress */
*q++ = LF;
}
else {
/* seek back */
filepos = _lseeki64_nolock(fh, -1i64, FILE_CURRENT);
if (peekchr != LF)
*q++ = CR;
}
}
}
}
}
}
/* we now change bytes_read to reflect the true number of chars
in the buffer */
bytes_read = (int)(q - (char *)buf);
if((tmode == __IOINFO_TM_UTF8) && (bytes_read != 0)) {
/* UTF8 reads need to be converted into UTF16 */
--q; /* q has gone beyond the last char */
/*
* If the last byte is a standalone UTF-8 char. We then
* take the whole buffer. Otherwise we skip back till we
* come to a lead byte. If the leadbyte forms a complete
* UTF-8 character will the remaining part of the buffer,
* then again we take the whole buffer. If not, we skip to
* one byte which should be the final trail byte of the
* previous UTF-8 char or a standalone UTF-8 character
*/
if(_utf8_is_independent(*q)) {
++q;
/*
* Final byte is standalone, we reset q, because we
* will now consider the full buffer which we have read
*/
}
else {
int ctr = 1;
int cnt_trailbytes;
while(!_utf8_is_leadbyte(*q) && ctr <= 4 && q >= (char *)buf) {
--q;
++ctr;
}
cnt_trailbytes = _utf8_no_of_trailbytes(*q);
if(cnt_trailbytes == 0) {
/*
* Should have exited the while by finding a lead
* byte else, the file has incorrect UTF-8 chars
*/
errno = EILSEQ;
retval = -1;
goto error_return;
}
if(cnt_trailbytes + 1 == ctr) {
/*
* The leadbyte + the remaining bytes form a full
* set
*/
q += ctr;
}
else {
/* Seek back */
if (_osfile(fh) & (FDEV|FPIPE)) {
/*
* non-seekable device. Put the extra chars in
* _pipech & _pipech2. We would have a maximum
* of 3 extra chars
*/
_pipech(fh) = *q;
++q;
if(ctr >= 2) {
_pipech2(fh)[0] = *q;
++q;
}
if(ctr == 3) {
_pipech2(fh)[1] = *q;
++q;
}
/*
* We need to point q back to beyond whatever
* we actually took in.
*/
q -= ctr;
}
else {
/* We have read extra chars, so we seek back */
filepos = _lseeki64_nolock(fh, -ctr, FILE_CURRENT);
}
}
}
bytes_read = (int)(q - (char *)buf);
bytes_read = MultiByteToWideChar(
CP_UTF8,
0,
buf,
bytes_read,
inputbuf,
inputsize/2);
if(!bytes_read) {
_dosmaperr(GetLastError());
retval = -1;
goto error_return;
}
/* MultiByteToWideChar returns no of wchar_t's. Double it */
bytes_read = bytes_read*2;
}
}
else {
/* set CRLF flag to indicate LF at beginning of buffer */
if ( (os_read != 0) && (*(wchar_t *)buf == LF) )
_osfile(fh) |= FCRLF;
else
_osfile(fh) &= ~FCRLF;
/* convert chars in the buffer: pu is src, qu is dest */
pu = qu = (wchar_t *)buf;
while ((char *)pu < (char *)buf + bytes_read) {
if (*pu == CTRLZ) {
/* if fh is not a device, set ctrl-z flag */
if ( !(_osfile(fh) & FDEV) )
_osfile(fh) |= FEOFLAG;
else
*qu++ = *pu++;
break; /* stop translating */
}
else if (*pu != CR)
*qu++ = *pu++;
else {
/* *pu is CR, so must check next wchar_t for LF */
if ((char *)pu < (char *)buf + bytes_read - 2) {
if (*(pu+1) == LF) {
pu += 2;
*qu++ = LF; /* convert CR-LF to LF */
}
else
*qu++ = *pu++; /* store char normally */
}
else {
/* This is the hard part. We found a CR at end of
buffer. We must peek ahead to see if next
wchar_t is an LF. */
++pu;
dosretval = 0;
if ( !ReadFile( (HANDLE)_osfhnd(fh), &wpeekchr, 2,
(LPDWORD)&os_read, NULL ) )
dosretval = GetLastError();
if (dosretval != 0 || os_read == 0) {
/* couldn't read ahead, store CR */
*qu++ = CR;
}
else {
/*
* peekchr now has the extra character -- we
* now have several possibilities:
* 1. wchar_t is not LF; just seek back and
* copy CR
* 2. wchar_t is LF; seek back and discard CR
* 3. disk file, wchar_t is LF but this is a
* one-byte read: store LF, don't seek back.
*/
if (_osfile(fh) & (FDEV|FPIPE)) {
/* non-seekable device */
if (wpeekchr == LF)
*qu++ = LF;
else {
char * pwpeekchr = (char *)&wpeekchr;
*qu++ = CR;
_pipech(fh) = *pwpeekchr;
++pwpeekchr;
_pipech2(fh)[0] = *pwpeekchr;
_pipech2(fh)[1] = LF; /* Mark as empty */
}
}
else {
if ((char *)qu == buf && wpeekchr == LF) {
/* nothing read yet; must make some
progress */
*qu++ = LF;
}
else {
/* seek back */
filepos = _lseeki64_nolock(fh, -2, FILE_CURRENT);
if (wpeekchr != LF)
*qu++ = CR;
}
}
}
}
}
}
/* we now change bytes_read to reflect the true number of chars
in the buffer */
bytes_read = (int)((char *)qu - (char *)buf);
}
}
error_return:
if(buf != inputbuf) {
free(buf);
}
return (retval == -2) ? bytes_read : retval ;
}
/* now define version that doesn't lock/unlock, validate fh */
int __cdecl _write_nolock (
int fh,
const void *buf,
unsigned cnt
)
{
int lfcount; /* count of line feeds */
int charcount; /* count of chars written so far */
int written; /* count of chars written on this write */
ULONG dosretval; /* o.s. return value */
char tmode ; /* textmode - ANSI or UTF-16 */
BOOL toConsole = 0; /* true when writing to console */
BOOL isCLocale = 0; /* true when locale handle is C locale */
lfcount = charcount = 0; /* nothing written yet */
if (cnt == 0)
return 0; /* nothing to do */
_VALIDATE_CLEAR_OSSERR_RETURN( (buf != NULL), EINVAL, -1 );
tmode = _textmode(fh);
if(tmode == __IOINFO_TM_UTF16LE ||
tmode == __IOINFO_TM_UTF8)
{
/* For a UTF-16 file, the count must always be an even number */
_VALIDATE_CLEAR_OSSERR_RETURN(((cnt & 1) == 0), EINVAL, -1);
}
if (_osfile(fh) & FAPPEND) {
/* appending - seek to end of file; ignore error, because maybe
file doesn't allow seeking */
#if _INTEGRAL_MAX_BITS >= 64
(void)_lseeki64_nolock(fh, 0, FILE_END);
#else /* _INTEGRAL_MAX_BITS >= 64 */
(void)_lseek_nolock(fh, 0, FILE_END);
#endif /* _INTEGRAL_MAX_BITS >= 64 */
}
/* check for text mode with LF's in the buffer */
/*
* Note that in case the handle belongs to Console, write file will
* generate garbage output. For user to print these characters
* correctly, we will need to print ANSI.
*
* Also note that in case of printing to Console, we still have to
* convert the characters to console codepage.
*/
if (_isatty(fh) && (_osfile(fh) & FTEXT))
{
DWORD dwMode;
_ptiddata ptd = _getptd();
isCLocale = (ptd->ptlocinfo->lc_handle[LC_CTYPE] == _CLOCALEHANDLE);
toConsole = GetConsoleMode((HANDLE)_osfhnd(fh), &dwMode);
}
/* don't need double conversion if it's ANSI mode C locale */
if (toConsole && !(isCLocale && (tmode == __IOINFO_TM_ANSI))) {
UINT consoleCP = GetConsoleCP();
char mboutbuf[MB_LEN_MAX];
wchar_t tmpchar;
int size = 0;
int written = 0;
char *pch;
for (pch = (char *)buf; (unsigned)(pch - (char *)buf) < cnt; ) {
BOOL bCR;
if (tmode == __IOINFO_TM_ANSI) {
bCR = *pch == LF;
/*
* Here we need to do double convert. i.e. convert from
* multibyte to unicode and then from unicode to multibyte in
* Console codepage.
*/
if (!isleadbyte(*pch)) {
if (mbtowc(&tmpchar, pch, 1) == -1) {
break;
}
} else if ((cnt - (pch - (char*)buf)) > 1) {
if (mbtowc(&tmpchar, pch, 2) == -1) {
break;
}
/*
* Increment pch to accomodate DBCS character.
*/
++pch;
} else {
break;
}
++pch;
} else if (tmode == __IOINFO_TM_UTF8 || tmode == __IOINFO_TM_UTF16LE) {
/*
* Note that bCR set above is not valid in case of UNICODE
* stream. We need to set it using unicode character.
*/
tmpchar = *(wchar_t *)pch;
bCR = tmpchar == LF;
pch += 2;
}
if (tmode == __IOINFO_TM_ANSI)
{
if( (size = WideCharToMultiByte(consoleCP,
0,
&tmpchar,
1,
mboutbuf,
sizeof(mboutbuf),
NULL,
NULL)) == 0) {
break;
} else {
if ( WriteFile( (HANDLE)_osfhnd(fh),
mboutbuf,
size,
(LPDWORD)&written,
NULL) ) {
charcount += written;
if (written < size)
break;
} else {
dosretval = GetLastError();
break;
}
}
if (bCR) {
size = 1;
mboutbuf[0] = CR;
if (WriteFile((HANDLE)_osfhnd(fh),
mboutbuf,
size,
(LPDWORD)&written,
NULL) ) {
if (written < size)
break;
lfcount ++;
charcount++;
} else {
dosretval = GetLastError();
break;
}
}
}
else if ( tmode == __IOINFO_TM_UTF8 || tmode == __IOINFO_TM_UTF16LE)
{
if ( _putwch_nolock(tmpchar) == tmpchar )
{
charcount++;
}
else
{
dosretval = GetLastError();
break;
}
if (bCR) /* emit carriage return */
{
size = 1;
tmpchar = CR;
if ( _putwch_nolock(tmpchar) == tmpchar )
{
charcount++;
lfcount++;
}
else
{
dosretval = GetLastError();
break;
}
}
}
}
} else if ( _osfile(fh) & FTEXT ) {
/* text mode, translate LF's to CR/LF's on output */
dosretval = 0; /* no OS error yet */
if(tmode == __IOINFO_TM_ANSI) {
char ch; /* current character */
char *p = NULL, *q = NULL; /* pointers into buf and lfbuf resp. */
char lfbuf[BUF_SIZE];
p = (char *)buf; /* start at beginning of buffer */
while ( (unsigned)(p - (char *)buf) < cnt ) {
q = lfbuf; /* start at beginning of lfbuf */
/* fill the lf buf, except maybe last char */
while ( q - lfbuf < sizeof(lfbuf) - 1 &&
(unsigned)(p - (char *)buf) < cnt ) {
ch = *p++;
if ( ch == LF ) {
++lfcount;
*q++ = CR;
}
*q++ = ch;
}
/* write the lf buf and update total */
if ( WriteFile( (HANDLE)_osfhnd(fh),
lfbuf,
(int)(q - lfbuf),
(LPDWORD)&written,
NULL) )
{
charcount += written;
if (written < q - lfbuf)
break;
}
else {
dosretval = GetLastError();
break;
}
}
} else if ( tmode == __IOINFO_TM_UTF16LE ){
char lfbuf[BUF_SIZE];
wchar_t wch; /* current wide char */
wchar_t *pu = (wchar_t *)buf;
wchar_t *qu = NULL;
while ( (unsigned)((char *)pu - (char *)buf) < cnt ) {
qu = (wchar_t *)lfbuf; /* start at beginning of lfbuf */
/* fill the lf buf, except maybe last wchar_t */
while ( (((char *)qu - lfbuf) < (sizeof(lfbuf) - 2)) &&
((unsigned)((char *)pu - (char *)buf) < cnt )) {
wch = *pu++;
if ( wch == LF ) {
lfcount+=2;
*qu++ = CR;
}
*qu++ = wch;
}
/* write the lf buf and update total */
if ( WriteFile( (HANDLE)_osfhnd(fh),
lfbuf,
(int)((char*)qu - lfbuf),
(LPDWORD)&written,
NULL) )
{
charcount += written;
if (written < ((char *)qu - lfbuf))
break;
}
else {
dosretval = GetLastError();
break;
}
}
} else {
/*
* Let's divide the lfbuf in 1:2 wher 1 is for storing
* widecharacters and 2 if for converting it to UTF8. This takes
* into account the worst case scenario where all the UTF8
* characters are 4 byte long.
*/
char utf8_buf[(BUF_SIZE*2)/3];
wchar_t utf16_buf[BUF_SIZE/6];
wchar_t wch; /* current wide char */
wchar_t *pu = (wchar_t *)buf;
wchar_t *qu = NULL;
pu = (wchar_t *)buf;
while ((unsigned)((char *)pu - (char *)buf) < cnt) {
int bytes_converted = 0;
qu = utf16_buf; /* start at beginning of lfbuf */
while ( (((char *)qu - (char *)utf16_buf) <
(sizeof(utf16_buf) - 2)) &&
((unsigned)((char *)pu - (char *)buf) < cnt )) {
wch = *pu++;
if ( wch == LF ) {
/* no need to count the linefeeds here: we calculate the written chars in another way */
*qu++ = CR;
}
*qu++ = wch;
}
bytes_converted = WideCharToMultiByte(
CP_UTF8,
0,
utf16_buf,
((int)((char *)qu - (char *)utf16_buf))/2,
utf8_buf,
sizeof(utf8_buf),
NULL,
NULL);
if (bytes_converted == 0) {
dosretval = GetLastError();
break;
} else {
/*
* Here we need to make every attempt to write all the
* converted characters. The resaon behind this is,
* incase half the bytes of a UTF8 character is
* written, it may currupt whole of the stream or file.
*
* The loop below will make sure we exit only if all
* the bytes converted are written (which makes sure no
* partial MBCS is written) or there was some error in
* the stream.
*/
int bytes_written = 0;
do {
if (WriteFile(
(HANDLE)_osfhnd(fh),
utf8_buf + bytes_written,
bytes_converted - bytes_written,
&written,
NULL)) {
bytes_written += written;
} else {
dosretval = GetLastError();
break;
}
} while ( bytes_converted > bytes_written);
/*
* Only way the condition below could be true is if
* there was en error. In case of error we need to
* break this loop as well.
*/
if (bytes_converted > bytes_written) {
break;
}
/* if this chunk has been committed successfully, update charcount */
charcount = (int)((char *)pu - (char *)buf);
}
}
}
}
else {
/* binary mode, no translation */
if ( WriteFile( (HANDLE)_osfhnd(fh),
(LPVOID)buf,
cnt,
(LPDWORD)&written,
NULL) )
{
dosretval = 0;
charcount = written;
}
else
dosretval = GetLastError();
}
if (charcount == 0) {
/* If nothing was written, first check if an o.s. error,
otherwise we return -1 and set errno to ENOSPC,
unless a device and first char was CTRL-Z */
if (dosretval != 0) {
/* o.s. error happened, map error */
if (dosretval == ERROR_ACCESS_DENIED) {
/* wrong read/write mode should return EBADF, not
EACCES */
errno = EBADF;
_doserrno = dosretval;
}
else
_dosmaperr(dosretval);
return -1;
}
else if ((_osfile(fh) & FDEV) && *(char *)buf == CTRLZ)
return 0;
else {
errno = ENOSPC;
_doserrno = 0; /* no o.s. error */
return -1;
}
}
else
/* return adjusted bytes written */
return charcount - lfcount;
}
static int __cdecl locking_nolock(int const fh, int const locking_mode, long const number_of_bytes) throw()
{
__int64 const lock_offset = _lseeki64_nolock(fh, 0L, SEEK_CUR);
if (lock_offset == -1)
return -1;
OVERLAPPED overlapped = { 0 };
overlapped.Offset = static_cast<DWORD>(lock_offset);
overlapped.OffsetHigh = static_cast<DWORD>((lock_offset >> 32) & 0xffffffff);
// Set the retry count, based on the mode:
bool const allow_retry = locking_mode == _LK_LOCK || locking_mode == _LK_RLCK;
int const retry_count = allow_retry ? 10 : 1;
// Ask the OS to lock the file either until the request succeeds or the
// retry count is reached, whichever comes first. Note that the only error
// possible is a locking violation, since an invalid handle would have
// already failed above.
bool succeeded = false;
for (int i = 0; i != retry_count; ++i)
{
if (locking_mode == _LK_UNLCK)
{
succeeded = UnlockFileEx(
reinterpret_cast<HANDLE>(_get_osfhandle(fh)),
0,
number_of_bytes,
0,
&overlapped) == TRUE;
}
else
{
// Ensure exclusive lock access, and return immediately if lock
// acquisition fails:
succeeded = LockFileEx(
reinterpret_cast<HANDLE>(_get_osfhandle(fh)),
LOCKFILE_EXCLUSIVE_LOCK | LOCKFILE_FAIL_IMMEDIATELY,
0,
number_of_bytes,
0,
&overlapped) == TRUE;
}
if (succeeded)
break;
Sleep(1000);
}
// If an OS error occurred (e.g., if the file was already locked), return
// EDEADLOCK if this was ablocking call; otherwise map the error noramlly:
if (!succeeded)
{
__acrt_errno_map_os_error(GetLastError());
if (locking_mode == _LK_LOCK || locking_mode == _LK_RLCK)
{
errno = EDEADLOCK;
}
return -1;
}
return 0;
}