// Function Specification
//
// Name: errlTestSetErrlSevToInfo
//
// Description: errlTestSetErrlSevToInfo
//
// End Function Specification
uint32_t errlTestSetErrlSevToInfo()
{
uint32_t l_rc = 0;
ERRL_DBG("START");
do
{
errlHndl_t l_handle = NULL;
/****************************************************/
// Check setErrlSevToInfo
// Create ERRL_SEV_PREDICTIVE log
l_handle = createErrl( TEST_MODULE_ID, 0x08, OCC_NO_EXTENDED_RC, ERRL_SEV_PREDICTIVE,g_trac_inf, 128, 0x1, 0x2);
CHECK_CONDITION( l_handle != INVALID_ERR_HNDL, l_rc);
// Add callout
addCalloutToErrl(l_handle,ERRL_CALLOUT_TYPE_HUID,0x00,ERRL_CALLOUT_PRIORITY_LOW);
CHECK_CONDITION( l_handle->iv_numCallouts == 1, l_rc);
// Call setErrlSevToInfo. Callouts within log should be cleared and
// iv_severity should be set to ERRL_SEV_INFORMATIONAL
setErrlSevToInfo(l_handle);
CHECK_CONDITION( (l_handle->iv_numCallouts == 0) &&
(l_handle->iv_severity == ERRL_SEV_INFORMATIONAL), l_rc);
deleteErrl( &l_handle );
ppdumpslot();
/****************************************************/
// Check setErrlSevToInfo after errl is committed
// Create log
l_handle = createErrl( TEST_MODULE_ID, 0x08, OCC_NO_EXTENDED_RC, ERRL_SEV_PREDICTIVE,g_trac_inf, 128, 0x1, 0x2);
CHECK_CONDITION( l_handle != INVALID_ERR_HNDL, l_rc);
errlHndl_t l_log = l_handle;
// Add callout
addCalloutToErrl(l_handle,ERRL_CALLOUT_TYPE_HUID,0x00,ERRL_CALLOUT_PRIORITY_LOW);
CHECK_CONDITION( l_handle->iv_numCallouts == 1, l_rc);
// Commit log and call setErrlSevToInfo. But setErrlSevToInfo will do nothing
commitErrl( &l_handle );
setErrlSevToInfo(l_handle);
CHECK_CONDITION( (l_log->iv_numCallouts == ERRL_MAX_CALLOUTS) &&
(l_log->iv_severity == ERRL_SEV_PREDICTIVE), l_rc);
deleteErrl(&l_log);
ERRL_DBG("END \n");
}while(0);
return l_rc;
}
// Called after a failure to read a DIMM temperature. The error will
// be counted and if threshold is reached, and error will be created with
// the DIMM as a callout and then set flag to trigger I2C reset
void mark_dimm_failed()
{
const uint8_t port = G_dimm_sm_args.i2cPort;
const uint8_t dimm = G_dimm_sm_args.dimm;
INTR_TRAC_ERR("mark_dimm_failed: DIMM%04X failed in state/rc/count=0x%06X "
"(ffdc 0x%08X%08X, completion_state 0x%02X)",
DIMM_AND_PORT, (G_dimm_sm_args.state << 16) | (G_dimm_sm_args.error.rc << 8) | G_dimm[port][dimm].errorCount,
WORD_HIGH(G_dimm_sm_args.error.ffdc),
WORD_LOW(G_dimm_sm_args.error.ffdc),
G_dimm_sm_request.request.completion_state);
if (++G_dimm[port][dimm].errorCount > MAX_CONSECUTIVE_DIMM_RESETS)
{
// Disable collection on this DIMM, collect FFDC and log error
G_dimm[port][dimm].disabled = true;
INTR_TRAC_ERR("mark_dimm_failed: disabling DIMM%04X due to %d consecutive errors (state=%d)",
DIMM_AND_PORT, G_dimm[port][dimm].errorCount, G_dimm_sm_args.state);
errlHndl_t l_err = NULL;
/*
* @errortype
* @moduleid DIMM_MID_MARK_DIMM_FAILED
* @reasoncode DIMM_GPE_FAILURE
* @userdata1 GPE returned rc code
* @userdata4 ERC_DIMM_COMPLETE_FAILURE
* @devdesc Failure writing dimm i2c mode register
*/
l_err = createErrl(DIMM_MID_MARK_DIMM_FAILED,
DIMM_GPE_FAILURE,
ERC_DIMM_COMPLETE_FAILURE,
ERRL_SEV_INFORMATIONAL,
NULL,
DEFAULT_TRACE_SIZE,
G_dimm_sm_args.error.rc,
0);
addUsrDtlsToErrl(l_err,
(uint8_t*)&G_dimm_sm_request.ffdc,
sizeof(G_dimm_sm_request.ffdc),
ERRL_STRUCT_VERSION_1,
ERRL_USR_DTL_BINARY_DATA);
addCalloutToErrl(l_err,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.dimm_huids[port][dimm],
ERRL_CALLOUT_PRIORITY_HIGH);
commitErrl(&l_err);
}
// Reset DIMM I2C engine
G_dimm_i2c_reset_required = true;
G_dimm_i2c_reset_cause = port<<24 | dimm<<16 | (G_dimm_sm_args.error.rc & 0xFFFF);
G_dimm_state = DIMM_STATE_RESET_MASTER;
} // end mark_dimm_failed()
// Function Specification
//
// Name: amec_update_vrm_sensors
//
// Description: Updates sensors that use data from the VRMs
// (e.g., VR_FAN, FANS_FULL_SPEED, VR_HOT).
//
// Thread: RealTime Loop
//
// End Function Specification
void amec_update_vrm_sensors(void)
{
/*------------------------------------------------------------------------*/
/* Local Variables */
/*------------------------------------------------------------------------*/
int l_rc = 0;
int l_vrfan = 0;
int l_softoc = 0;
int l_minus_np1_regmode = 0;
int l_minus_n_regmode = 0;
static uint8_t L_error_count = 0;
uint8_t l_pin = 0;
uint8_t l_pin_value = 1; // active low, so set default to high
uint8_t l_vrhot_count = 0;
errlHndl_t l_err = NULL;
/*------------------------------------------------------------------------*/
/* Code */
/*------------------------------------------------------------------------*/
// Check if we have access to SPIVID. In DCMs only Master OCC has access to
// the SPIVID.
if (G_dcm_occ_role == OCC_DCM_MASTER)
{
// VR_FAN and SOFT_OC come from SPIVID
l_rc = vrm_read_state(SPIVRM_PORT(0),
&l_minus_np1_regmode,
&l_minus_n_regmode,
&l_vrfan,
&l_softoc);
if (l_rc == 0)
{
// Update the VR_FAN sensor
sensor_update( AMECSENSOR_PTR(VRFAN250USPROC), (uint16_t)l_vrfan );
// Clear our error count and the 'read failure' flag (since we can
// read VR_FAN signal)
L_error_count = 0;
G_thrm_fru_data[DATA_FRU_VRM].read_failure = 0;
// Obtain the 'fan_full_speed' GPIO from APSS
l_pin = G_sysConfigData.apss_gpio_map.fans_full_speed;
// No longer reading gpio from APSS in GA1 due to instability in
// APSS composite mode
//apss_gpio_get(l_pin, &l_pin_value);
// VR_HOT sensor is a counter of number of times the VRHOT signal
// has been asserted
l_vrhot_count = AMECSENSOR_PTR(VRHOT250USPROC)->sample;
// Check if VR_FAN is asserted AND if 'fans_full_speed' GPIO is ON.
// Note that this GPIO is active low.
if (AMECSENSOR_PTR(VRFAN250USPROC)->sample && !(l_pin_value))
{
// VR_FAN is asserted and 'fans_full_speed' GPIO is ON,
// then increment our VR_HOT counter
if (l_vrhot_count < g_amec->vrhotproc.setpoint)
{
l_vrhot_count++;
}
}
else
{
// Reset our VR_HOT counter
l_vrhot_count = 0;
}
sensor_update(AMECSENSOR_PTR(VRHOT250USPROC), l_vrhot_count);
}
else
{
// Increment our error count
L_error_count++;
// Don't allow the error count to wrap
if (L_error_count == 0)
{
L_error_count = 0xFF;
}
// Log an error if we exceeded our number of fail-to-read sensor
if ((L_error_count == g_amec->proc[0].vrfan_error_count) &&
(g_amec->proc[0].vrfan_error_count != 0xFF))
{
TRAC_ERR("amec_update_vrm_sensors: Failed to read VR_FAN for %u consecutive times!",
L_error_count);
// Also, inform the thermal thread to send a cooling request
G_thrm_fru_data[DATA_FRU_VRM].read_failure = 1;
/* @
* @errortype
* @moduleid AMEC_HEALTH_CHECK_VRFAN_TIMEOUT
* @reasoncode VRM_VRFAN_TIMEOUT
* @userdata1 timeout value
* @userdata2 0
* @userdata4 OCC_NO_EXTENDED_RC
* @devdesc Failed to read VR_FAN signal from regulator.
*
*/
l_err = createErrl(AMEC_HEALTH_CHECK_VRFAN_TIMEOUT, //modId
VRM_VRFAN_TIMEOUT, //reasoncode
OCC_NO_EXTENDED_RC, //Extended reason code
ERRL_SEV_PREDICTIVE, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
g_amec->thermaldimm.temp_timeout, //userdata1
0); //userdata2
// Callout backplane for this VRM error
addCalloutToErrl(l_err,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.backplane_huid,
ERRL_CALLOUT_PRIORITY_MED);
// Commit the error
commitErrl(&l_err);
}
}
}
if( 1 )
{
sensor_update( AMECSENSOR_PTR(VRFAN250USMEM), 0 );
sensor_update( AMECSENSOR_PTR(VRHOT250USMEM), 0 );
}
}
// Check and update lock ownership for the specified i2c engine.
// Returns true if OCC owns the lock, or false if host owns lock
//
// If host has requesed the i2c lock, it will be released and an external interrupt
// will be generated/queued and function will return false.
// If the host has not released the lock, function will return false.
// If the host cleared its lock bit, OCC will take back ownership and return true.
//
bool check_and_update_i2c_lock(const uint8_t i_engine)
{
bool occ_owns_lock = true;
if ((PIB_I2C_ENGINE_E == i_engine) ||
(PIB_I2C_ENGINE_D == i_engine) ||
(PIB_I2C_ENGINE_C == i_engine))
{
bool needRetry = false;
do
{
ocb_occflg_t original_occflags;
original_occflags.value = in32(OCB_OCCFLG);
LOCK_DBG("check_and_update_i2c_lock: I2C engine %d - host=%d, occ=%d (dimmTick=%d)",
i_engine, original_occflags.fields.i2c_engine3_lock_host, original_occflags.fields.i2c_engine3_lock_occ, DIMM_TICK);
if (occ_owns_i2c_lock(original_occflags, i_engine))
{
if (host_wants_i2c_lock(original_occflags, i_engine))
{
// Host requested lock, clear the OCC lock and notify host
update_i2c_lock(LOCK_RELEASE, i_engine);
occ_owns_lock = false;
}
// else OCC already owns the lock
}
else
{
// OCC does not own the lock
occ_owns_lock = false;
if (false == host_wants_i2c_lock(original_occflags, i_engine))
{
// Host is not requesting the lock, acquire lock for OCC
update_i2c_lock(LOCK_ACQUIRE, i_engine);
occ_owns_lock = true;
}
// else Host still holds the lock
}
if ((occ_owns_lock) &&
(original_occflags.fields.i2c_engine1_lock_host == 0) &&
(original_occflags.fields.i2c_engine1_lock_occ == 0))
{
// If neither lock bit is set, we must read back the register to make
// sure the host did not set at same time (lock conflict)
ocb_occflg_t verify_occflags;
verify_occflags.value = in32(OCB_OCCFLG);
if (host_wants_i2c_lock(verify_occflags, i_engine))
{
// Host wrote their lock bit at same time, clear OCC lock and notify host
update_i2c_lock(LOCK_RELEASE, i_engine);
occ_owns_lock = false;
}
else
{
if (false == occ_owns_i2c_lock(verify_occflags, i_engine))
{
// ERROR - OCC OWNERSHIP BIT DID NOT GET SET
INTR_TRAC_ERR("check_and_update_i2c_lock: I2C lock bit did not get set (OCCFLAGS reg: 0x%08X)",
verify_occflags.value);
if (needRetry)
{
// After one retry, log error and goto safe
/*
* @errortype
* @moduleid I2C_LOCK_UPDATE
* @reasoncode OCI_WRITE_FAILURE
* @userdata1 I2C engine number
* @userdata2 OCC Flags register
* @devdesc OCI write failure setting I2C ownership bit
*/
errlHndl_t err = createErrl(I2C_LOCK_UPDATE,
OCI_WRITE_FAILURE,
OCC_NO_EXTENDED_RC,
ERRL_SEV_PREDICTIVE,
NULL,
DEFAULT_TRACE_SIZE,
i_engine,
verify_occflags.value);
//Callout firmware
addCalloutToErrl(err,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_MED);
//Callout processor
addCalloutToErrl(err,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.proc_huid,
ERRL_CALLOUT_PRIORITY_LOW);
REQUEST_RESET(err);
occ_owns_lock = false;
break;
}
needRetry = true;
}
// else verify succeeded (OCC owns lock)
}
}
} while (needRetry);
}
else
{
// Invalid engine
INTR_TRAC_ERR("check_and_update_i2c_lock: Invalid engine specified: 0x%02X", i_engine);
}
return occ_owns_lock;
} // end check_and_update_i2c_lock()
// Verifies that each core is at the correct frequency after they have had
// time to stabilize
void amec_verify_pstate()
{
uint8_t l_core = 0;
int8_t l_pstate_from_fmax = 0;
gpe_bulk_core_data_t * l_core_data_ptr;
pmc_pmsr_ffcdc_data_t l_pmc_pmsr_ffdc;
errlHndl_t l_err = NULL;
if ( (G_time_until_freq_check == 0) &&
( CURRENT_MODE() != OCC_MODE_DYN_POWER_SAVE ) &&
( CURRENT_MODE() != OCC_MODE_DYN_POWER_SAVE_FP ) &&
(!G_sysConfigData.system_type.kvm))
{
// Reset the counter
G_time_until_freq_check = FREQ_CHG_CHECK_TIME;
// Convert fmax to the corresponding pstate
l_pstate_from_fmax = proc_freq2pstate(g_amec->sys.fmax);
for( l_core = 0; l_core < MAX_NUM_CORES; l_core++ )
{
// If the core isn't present, skip it
if(!CORE_PRESENT(l_core))
{
l_pmc_pmsr_ffdc.pmsr_ffdc_data.data[l_core].value = 0;
continue;
}
// Get pointer to core data
l_core_data_ptr = proc_get_bulk_core_data_ptr(l_core);
// Get the core's pmsr data
l_pmc_pmsr_ffdc.pmsr_ffdc_data.data[l_core] = l_core_data_ptr->pcb_slave.pmsr;
// Verify that the core is running at the correct frequency
// If not, log an error
if( (l_pstate_from_fmax != l_pmc_pmsr_ffdc.pmsr_ffdc_data.data[l_core].fields.local_pstate_actual) &&
(l_pstate_from_fmax > l_pmc_pmsr_ffdc.pmsr_ffdc_data.data[l_core].fields.pv_min) &&
(l_err == NULL) )
{
TRAC_ERR("Frequency mismatch in core %d: actual_ps[%d] req_ps[%d] fmax[%d] mode[%d].",
l_core,
l_pmc_pmsr_ffdc.pmsr_ffdc_data.data[l_core].fields.local_pstate_actual,
l_pstate_from_fmax,
g_amec->sys.fmax,
CURRENT_MODE());
fill_pmc_ffdc_buffer(&l_pmc_pmsr_ffdc.pmc_ffcdc_data);
/* @
* @moduleid AMEC_VERIFY_FREQ_MID
* @reasonCode TARGET_FREQ_FAILURE
* @severity ERRL_SEV_PREDICTIVE
* @userdata1 0
* @userdata2 0
* @userdata4 OCC_NO_EXTENDED_RC
* @devdesc A core is not running at the expected frequency
*/
l_err = createErrl( AMEC_VERIFY_FREQ_MID, // i_modId,
TARGET_FREQ_FAILURE, // i_reasonCode,
OCC_NO_EXTENDED_RC,
ERRL_SEV_UNRECOVERABLE,
NULL, // i_trace,
DEFAULT_TRACE_SIZE, // i_traceSz,
0, // i_userData1,
0); // i_userData2
//Add firmware callout
addCalloutToErrl(l_err,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_HIGH);
//Add processor callout
addCalloutToErrl(l_err,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.proc_huid,
ERRL_CALLOUT_PRIORITY_MED);
}
}
if( l_err != NULL)
{
//Add our register dump to the error log
addUsrDtlsToErrl(l_err,
(uint8_t*) &l_pmc_pmsr_ffdc,
sizeof(l_pmc_pmsr_ffdc),
ERRL_USR_DTL_STRUCT_VERSION_1,
ERRL_USR_DTL_BINARY_DATA);
REQUEST_RESET(l_err);
}
}
}
// Function Specification
//
// Name: amec_slv_check_perf
//
// Description: Slave OCC's Detect and log degraded performance errors
// This function will run every tick.
//
// Thread: RealTime Loop
//
// Task Flags:
//
// End Function Specification
void amec_slv_check_perf(void)
{
/*------------------------------------------------------------------------*/
/* Local Variables */
/*------------------------------------------------------------------------*/
static BOOLEAN l_prev_failsafe_state = FALSE;
static BOOLEAN l_prev_ovs_state = FALSE;
static BOOLEAN l_prev_pcap_state = FALSE;
static ERRL_SEVERITY l_pcap_sev = ERRL_SEV_PREDICTIVE;
static BOOLEAN l_throttle_traced = FALSE;
static uint64_t l_time = 0;
/*------------------------------------------------------------------------*/
/* Code */
/*------------------------------------------------------------------------*/
// Verify that cores are at proper frequency
amec_verify_pstate();
do
{
// was frequency limited by power ?
if ( G_non_dps_power_limited != TRUE )
{
if(l_throttle_traced)
{
TRAC_INFO("Frequency not limited by power algorithms anymore");
l_throttle_traced = FALSE;
}
// we are done break and return
break;
}
// frequency limited due to failsafe condition ?
if ( AMEC_INTF_GET_FAILSAFE() == TRUE )
{
if ( l_prev_failsafe_state == TRUE)
{
// we are done break and return
break;
}
else
{
// log this error ONLY ONCE per IPL
l_prev_failsafe_state = TRUE;
TRAC_ERR("Frequency limited due to failsafe condition(mode:%d, state:%d)",
CURRENT_MODE(), CURRENT_STATE());
l_throttle_traced = TRUE;
l_time = ssx_timebase_get();
// log error that calls out OVS procedure
// set error severity to RRL_SEV_PREDICTIVE
/* @
* @errortype
* @moduleid AMEC_SLAVE_CHECK_PERFORMANCE
* @reasoncode INTERNAL_FAILURE
* @userdata1 Previous FailSafe State
* @userdata4 ERC_AMEC_SLAVE_FAILSAFE_STATE
* @devdesc Frequency limited due to failsafe condition
*/
errlHndl_t l_errl = createErrl(AMEC_SLAVE_CHECK_PERFORMANCE, //modId
INTERNAL_FAILURE, //reasoncode
ERC_AMEC_SLAVE_FAILSAFE_STATE,//Extended reason code
ERRL_SEV_PREDICTIVE, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
l_prev_failsafe_state, //userdata1
0); //userdata2
addCalloutToErrl( l_errl,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_OVERSUBSCRIPTION,
ERRL_CALLOUT_PRIORITY_HIGH
);
// and sets the consolidate action flag
setErrlActions( l_errl, ERRL_ACTIONS_CONSOLIDATE_ERRORS );
// Commit Error
commitErrl(&l_errl);
// we are done lets break
break;
}
}
// frequency limited due to oversubscription condition ?
if ( AMEC_INTF_GET_OVERSUBSCRIPTION() == TRUE )
{
if ( l_prev_ovs_state == TRUE)
{
// we are done break and return
break;
}
else
{
// log this error ONLY ONCE per IPL
l_prev_ovs_state = TRUE;
TRAC_ERR("Frequency limited due to oversubscription condition(mode:%d, state:%d)",
CURRENT_MODE(), CURRENT_STATE());
l_throttle_traced = TRUE;
l_time = ssx_timebase_get();
// log error that calls out OVS procedure
// set error severity to RRL_SEV_PREDICTIVE
// Updated the RC to match the actual RC passed to createErrl()
/* @
* @errortype
* @moduleid AMEC_SLAVE_CHECK_PERFORMANCE
* @reasoncode OVERSUB_LIMIT_ALERT
* @userdata1 Previous OVS State
* @userdata4 ERC_AMEC_SLAVE_OVS_STATE
* @devdesc Frequency limited due to oversubscription condition
*/
errlHndl_t l_errl = createErrl(AMEC_SLAVE_CHECK_PERFORMANCE, //modId
OVERSUB_LIMIT_ALERT, //reasoncode
ERC_AMEC_SLAVE_OVS_STATE, //Extended reason code
ERRL_SEV_PREDICTIVE, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
l_prev_ovs_state, //userdata1
0); //userdata2
// Callout to Oversubscription
addCalloutToErrl( l_errl,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_OVERSUBSCRIPTION,
ERRL_CALLOUT_PRIORITY_HIGH
);
// Callout to APSS
addCalloutToErrl( l_errl,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.apss_huid,
ERRL_CALLOUT_PRIORITY_MED
);
// Callout to Firmware
addCalloutToErrl( l_errl,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_LOW
);
// and sets the consolidate action flag
setErrlActions( l_errl, ERRL_ACTIONS_CONSOLIDATE_ERRORS );
// Commit Error
commitErrl(&l_errl);
// we are done lets break
break;
}
}
uint16_t l_snrBulkPwr = AMECSENSOR_PTR(PWR250US)->sample;
// frequency limited due to system power cap condition ?
if (( l_snrBulkPwr > (G_sysConfigData.pcap.system_pcap - PDROP_THRESH) )
&&
( G_sysConfigData.pcap.current_pcap == 0 ))
{
if ( l_prev_pcap_state == TRUE)
{
// we are done break and return
break;
}
else
{
//log this error ONLY ONCE per IPL
l_prev_pcap_state = TRUE;
TRAC_ERR("Frequency limited due to power cap condition(mode:%d, state:%d)",
CURRENT_MODE(), CURRENT_STATE());
TRAC_ERR("SnrBulkPwr %d > Sys Pcap %d ",l_snrBulkPwr,
G_sysConfigData.pcap.system_pcap );
TRAC_ERR("SnrFanPwr %d, SnrIOPwr %d, SnrStoragePwr %d, SnrGpuPrw %d ",
AMECSENSOR_PTR(PWR250USFAN)->sample,
AMECSENSOR_PTR(PWR250USIO)->sample,
AMECSENSOR_PTR(PWR250USSTORE)->sample,
AMECSENSOR_PTR(PWR250USGPU)->sample );
TRAC_ERR("SnrProcPwr 0 %d, SnrProcPwr 1 %d, SnrProcPwr 2 %d, SnrProcPwr 3 %d",
g_amec->proc_snr_pwr[0],
g_amec->proc_snr_pwr[1],
g_amec->proc_snr_pwr[2],
g_amec->proc_snr_pwr[3] );
TRAC_ERR("SnrMemPwr 0 %d, SnrMemPwr 1 %d, SnrMemPwr 2 %d, SnrMemPwr 3 %d",
g_amec->mem_snr_pwr[0],
g_amec->mem_snr_pwr[1],
g_amec->mem_snr_pwr[2],
g_amec->mem_snr_pwr[3] );
l_throttle_traced = TRUE;
l_time = ssx_timebase_get();
// log error that calls out firmware and APSS procedure
// set error severity to l_pcap_sev
/* @
* @errortype
* @moduleid AMEC_SLAVE_CHECK_PERFORMANCE
* @reasoncode PCAP_THROTTLE_POWER_LIMIT
* @userdata1 Current Sensor Bulk Power
* @userdata2 System PCAP
* @userdata4 ERC_AMEC_SLAVE_POWERCAP
* @devdesc Frequency limited due to PowerCap condition
*/
errlHndl_t l_errl = createErrl(AMEC_SLAVE_CHECK_PERFORMANCE, //modId
PCAP_THROTTLE_POWER_LIMIT, //reasoncode
ERC_AMEC_SLAVE_POWERCAP, //Extended reason code
l_pcap_sev, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
l_snrBulkPwr, //userdata1
G_sysConfigData.pcap.system_pcap);//userdata2
addCalloutToErrl( l_errl,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_HIGH
);
addCalloutToErrl( l_errl,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.apss_huid,
ERRL_CALLOUT_PRIORITY_HIGH
);
// and sets the consolidate action flag
setErrlActions( l_errl, ERRL_ACTIONS_CONSOLIDATE_ERRORS );
// then l_pcap_sev to informational
l_pcap_sev = ERRL_SEV_INFORMATIONAL;
// Commit Error
commitErrl(&l_errl);
// we are done lets break
break;
}
}
// trottle trace to every 3600 seconds (1hr = 3600000)
if(!l_throttle_traced && ( DURATION_IN_MS_UNTIL_NOW_FROM(l_time) > 3600000 ) )
{
TRAC_INFO("Frequency power limited due to transient condition: PowerLimited=%x, FailSafe=%x, OverSubScription=%x CurrentBulkPwr=%x",
G_non_dps_power_limited, AMEC_INTF_GET_FAILSAFE(), AMEC_INTF_GET_OVERSUBSCRIPTION(), l_snrBulkPwr );
l_throttle_traced = TRUE;
l_time = ssx_timebase_get();
}
}
while( 0 );
return;
}
// Function Specification
//
// Name: dbug_err_inject
//
// Description: Injects an error
//
// End Function Specification
void dbug_err_inject(const cmdh_fsp_cmd_t * i_cmd_ptr,
cmdh_fsp_rsp_t * i_rsp_ptr)
{
errlHndl_t l_err;
cmdh_dbug_inject_errl_query_t *l_cmd_ptr = (cmdh_dbug_inject_errl_query_t*) i_cmd_ptr;
i_rsp_ptr->data_length[0] = 0;
i_rsp_ptr->data_length[1] = 0;
G_rsp_status = ERRL_RC_SUCCESS;
if(!strncmp(l_cmd_ptr->comp, "RST", OCC_TRACE_NAME_SIZE))
{
l_err = createErrl(CMDH_DBUG_MID, //modId
INTERNAL_FAILURE, //reasoncode
OCC_NO_EXTENDED_RC, //Extended reason code
ERRL_SEV_PREDICTIVE, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
0xff, //userdata1
0); //userdata2
if (INVALID_ERR_HNDL == l_err)
{
G_rsp_status = ERRL_RC_INTERNAL_FAIL;
}
addCalloutToErrl(l_err,
ERRL_CALLOUT_TYPE_HUID, //callout type (HUID/CompID)
G_sysConfigData.proc_huid, //callout data
ERRL_CALLOUT_PRIORITY_HIGH); //priority
REQUEST_RESET(l_err);
}
else
{
l_err = createErrl(CMDH_DBUG_MID, //modId
INTERNAL_FAILURE, //reasoncode
OCC_NO_EXTENDED_RC, //Extended reason code
ERRL_SEV_UNRECOVERABLE, //Severity
TRAC_get_td(l_cmd_ptr->comp), //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
0xff, //userdata1
0); //userdata2
if (INVALID_ERR_HNDL == l_err)
{
G_rsp_status = ERRL_RC_INTERNAL_FAIL;
}
// Commit Error log
commitErrl(&l_err);
}
if (G_rsp_status == ERRL_RC_INTERNAL_FAIL)
{
TRAC_ERR("cmdh_dbug_inject_errl: Fail creating ERR Log\n");
}
else
{
TRAC_INFO("cmdh_dbug_inject_errl: inject errl for COMP : %s\n", l_cmd_ptr->comp);
}
return;
}
// Function Specification
//
// Name: dcom_initialize_roles
//
// Description: Initialize roles so we know if we are master or slave
//
// End Function Specification
void dcom_initialize_roles(void)
{
G_occ_role = OCC_SLAVE;
// Locals
pba_xcfg_t pbax_cfg_reg;
// Used as a debug tool to correlate time between OCCs & System Time
// getscom_ffdc(OCB_OTBR, &G_dcomTime.tod, NULL); // Commits errors internally
G_dcomTime.tod = in64(OCB_OTBR) >> 4;
G_dcomTime.base = ssx_timebase_get();
pbax_cfg_reg.value = in64(PBA_XCFG);
if(pbax_cfg_reg.fields.rcv_groupid < MAX_NUM_NODES &&
pbax_cfg_reg.fields.rcv_chipid < MAX_NUM_OCC)
{
TRAC_IMP("Proc ChipId (%d) NodeId (%d)",
pbax_cfg_reg.fields.rcv_chipid,
pbax_cfg_reg.fields.rcv_groupid);
G_pbax_id.valid = 1;
G_pbax_id.node_id = pbax_cfg_reg.fields.rcv_groupid;
G_pbax_id.chip_id = pbax_cfg_reg.fields.rcv_chipid;
G_pbax_id.module_id = G_pbax_id.chip_id;
// Always start as OCC Slave
G_occ_role = OCC_SLAVE;
rtl_set_run_mask(RTL_FLAG_NOTMSTR);
// Set the initial presence mask, and count the number of occ's present
G_sysConfigData.is_occ_present |= (0x01 << G_pbax_id.chip_id);
G_occ_num_present = __builtin_popcount(G_sysConfigData.is_occ_present);
}
else // Invalid chip/node ID(s)
{
TRAC_ERR("Proc ChipId (%d) and/or NodeId (%d) too high: request reset",
pbax_cfg_reg.fields.rcv_chipid,
pbax_cfg_reg.fields.rcv_groupid);
/* @
* @errortype
* @moduleid DCOM_MID_INIT_ROLES
* @reasoncode INVALID_CONFIG_DATA
* @userdata1 PBAXCFG (upper)
* @userdata2 PBAXCFG (lower)
* @userdata4 ERC_CHIP_IDS_INVALID
* @devdesc Failure determining OCC role
*/
errlHndl_t l_errl = createErrl(
DCOM_MID_INIT_ROLES, //ModId
INVALID_CONFIG_DATA, //Reasoncode
ERC_CHIP_IDS_INVALID, //Extended reasoncode
ERRL_SEV_UNRECOVERABLE, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
pbax_cfg_reg.words.high_order, //Userdata1
pbax_cfg_reg.words.low_order //Userdata2
);
// Callout firmware
addCalloutToErrl(l_errl,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_HIGH);
//Add processor callout
addCalloutToErrl(l_errl,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.proc_huid,
ERRL_CALLOUT_PRIORITY_LOW);
G_pbax_id.valid = 0; // Invalid Chip/Node ID
}
// Initialize DCOM Thread Sem
ssx_semaphore_create( &G_dcomThreadWakeupSem, // Semaphore
1, // Initial Count
0); // No Max Count
}
// Function Specification
//
// Name: errlTestCallouts
//
// Description: errlTestCallouts
//
// End Function Specification
uint32_t errlTestCallouts()
{
uint32_t l_rc = 0;
ERRL_DBG("START");
do
{
errlHndl_t l_handle = NULL;
ERRL_DBG("--------------------------------\n");
/****************************************************/
// Check max callouts
l_handle = createErrl( TEST_MODULE_ID, 0x08, OCC_NO_EXTENDED_RC, ERRL_SEV_PREDICTIVE,g_trac_inf, 128, 0x1, 0x2);
CHECK_CONDITION( l_handle != INVALID_ERR_HNDL, l_rc);
ERRL_CALLOUT_PRIORITY l_array[8] = {
ERRL_CALLOUT_PRIORITY_HIGH,
ERRL_CALLOUT_PRIORITY_MED,
ERRL_CALLOUT_PRIORITY_LOW,
ERRL_CALLOUT_PRIORITY_HIGH,
ERRL_CALLOUT_PRIORITY_MED,
ERRL_CALLOUT_PRIORITY_MED,
ERRL_CALLOUT_PRIORITY_LOW,
ERRL_CALLOUT_PRIORITY_LOW,
};
ERRL_CALLOUT_TYPE l_type[8] = {
ERRL_CALLOUT_TYPE_HUID,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_CALLOUT_TYPE_HUID,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_CALLOUT_TYPE_HUID,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_CALLOUT_TYPE_HUID,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
};
// add 6 (ERRL_MAX_CALLOUTS) callouts
uint8_t l_index = 0;
for(l_index = 0; l_index < ERRL_MAX_CALLOUTS; l_index++)
{
ERRL_DBG("current callouts %d attempting to add callout # %d with type %d ,priority %d", l_handle->iv_numCallouts, l_index, l_type[l_index], l_array[l_index] );
addCalloutToErrl(l_handle,l_type[l_index],l_index,l_array[l_index]);
}
CHECK_CONDITION( l_handle->iv_numCallouts == ERRL_MAX_CALLOUTS, l_rc);
// add one more callout and it should fail
addCalloutToErrl(l_handle,l_type[0],l_index,l_array[0]);
CHECK_CONDITION( l_handle->iv_numCallouts == ERRL_MAX_CALLOUTS, l_rc);
dumpLog( l_handle, l_handle->iv_userDetails.iv_entrySize );
deleteErrl( &l_handle );
ppdumpslot();
/****************************************************/
// Check callouts after errl is committed
// Create log
l_handle = createErrl( TEST_MODULE_ID, 0x08, OCC_NO_EXTENDED_RC, ERRL_SEV_PREDICTIVE,g_trac_inf, 32, 0x1, 0x2);
errlHndl_t l_log = l_handle;
CHECK_CONDITION( l_handle != INVALID_ERR_HNDL, l_rc);
// Commit log and add callout. But adding callout should fail
commitErrl( &l_handle );
addCalloutToErrl(l_handle,l_type[0],0,l_array[0]);
CHECK_CONDITION( l_log->iv_numCallouts == ERRL_MAX_CALLOUTS, l_rc);
deleteErrl(&l_log);
/****************************************************/
// Check addCalloutToErrl for ERRL_SEV_INFORMATIONAL log
// Create ERRL_SEV_INFORMATIONAL log
l_handle = createErrl( TEST_MODULE_ID, 0x08, OCC_NO_EXTENDED_RC, ERRL_SEV_INFORMATIONAL,g_trac_inf, 128, 0x1, 0x2);
CHECK_CONDITION( l_handle != INVALID_ERR_HNDL, l_rc);
if(l_handle == INVALID_ERR_HNDL)
// add one callout and it should fail
addCalloutToErrl(l_handle,l_type[0],l_index,l_array[0]);
CHECK_CONDITION( l_handle->iv_numCallouts == 0, l_rc);
dumpLog( l_handle, l_handle->iv_userDetails.iv_entrySize );
deleteErrl( &l_handle );
ppdumpslot();
ERRL_DBG("END \n");
}while(0);
return l_rc;
}
// Function Specification
//
// Name: errlTestErrorHandling
//
// Description: errlTestErrorHandling
//
// End Function Specification
uint32_t errlTestErrorHandling()
{
uint32_t l_rc = 0;
errlHndl_t l_errlHnd = NULL;
uint8_t l_dataPtr[10];
uint16_t l_entrySizeBefore = 0;
uint16_t l_entrySizeAfter = 0;
ERRL_DBG(" START");
do
{
/****************************************************/
// Test createErrl with incorrect parameter
// Set ERRL_SEVERITY to 0x04, out of range so log won't be created
l_errlHnd = createErrl(TEST_MODULE_ID, 0x08, OCC_NO_EXTENDED_RC, 0x04, NULL, 0, 0x01, 0x02);
CHECK_CONDITION( l_errlHnd == INVALID_ERR_HNDL, l_rc);
/****************************************************/
// Test addTraceToErrl with incorrect parameter
// Create a log
l_errlHnd = createErrl(TEST_MODULE_ID, 0x08, OCC_NO_EXTENDED_RC, ERRL_SEV_PREDICTIVE, NULL, 0, 0x01, 0x02);
CHECK_CONDITION( l_errlHnd != INVALID_ERR_HNDL, l_rc);
// i_trace = NULL, so entry size doesn't change
l_entrySizeBefore = l_errlHnd->iv_userDetails.iv_entrySize;
addTraceToErrl(NULL, 5, l_errlHnd);
l_entrySizeAfter = l_errlHnd->iv_userDetails.iv_entrySize;
CHECK_CONDITION(l_entrySizeBefore == l_entrySizeAfter, l_rc);
// i_traceSz = 0, entry size doesn't change
l_entrySizeBefore = l_errlHnd->iv_userDetails.iv_entrySize;
addTraceToErrl(g_trac_inf, 0, l_errlHnd); // @at012c
l_entrySizeAfter = l_errlHnd->iv_userDetails.iv_entrySize;
CHECK_CONDITION( l_entrySizeBefore == l_entrySizeAfter, l_rc);
// io_err = NULL, entry size doesn't change
l_entrySizeBefore = l_errlHnd->iv_userDetails.iv_entrySize;
addTraceToErrl(g_trac_inf, 32, NULL); // @at012c
l_entrySizeAfter = l_errlHnd->iv_userDetails.iv_entrySize;
CHECK_CONDITION( l_entrySizeBefore == l_entrySizeAfter, l_rc);
// test addTraceToErrl after log is comitted so entry size doesn't change
errlHndl_t l_errlHndx = l_errlHnd;
commitErrl(&l_errlHnd);
l_entrySizeBefore = l_errlHndx->iv_userDetails.iv_entrySize;
addTraceToErrl(g_trac_inf, 32, l_errlHndx); // @at012c
l_entrySizeAfter = l_errlHndx->iv_userDetails.iv_entrySize;
CHECK_CONDITION( l_entrySizeBefore == l_entrySizeAfter, l_rc);
deleteErrl(&l_errlHndx);
CHECK_CONDITION( l_errlHndx == NULL, l_rc);
// io_err = INVALID_ERR_HNDL
// We are making sure that this function
// handles a INVALID_ERR_HNDL being passed, and that we can't verify if
// an error occurred by checking anything. (It will just cause
// a TLB exception)
l_errlHnd = INVALID_ERR_HNDL;
addTraceToErrl(g_trac_inf, 32, l_errlHnd);
/****************************************************/
// Test commitErrl with incorrect parameter
// io_err = NULL
// We are making sure that this function
// handles a NULL being passed, and that we can't verify if
// an error occurred by checking anything. (It will just cause
// a TLB exception)
commitErrl( NULL);
// l_errlHnd should be set to NULL
l_errlHnd = INVALID_ERR_HNDL;
commitErrl(&l_errlHnd);
CHECK_CONDITION( l_errlHnd == NULL, l_rc);
/****************************************************/
// Test deleteErrl with incorrect parameter
// io_err = NULL
// We are making sure that this function
// handles a NULL being passed, and that we can't verify if
// an error occurred by checking anything. (It will just cause
// a TLB exception)
deleteErrl( NULL);
// l_errlHnd should be set to NULL
l_errlHnd = INVALID_ERR_HNDL;
deleteErrl(&l_errlHnd);
CHECK_CONDITION( l_errlHnd == NULL, l_rc);
/****************************************************/
// Test addCalloutToErrl with incorrect parameter
// Set io_err to NULL
// We are making sure that this function
// handles a NULL being passed, and that we can't verify if
// an error occurred by checking anything. (It will just cause
// a TLB exception)
addCalloutToErrl(NULL, ERRL_CALLOUT_TYPE_HUID, 0, ERRL_CALLOUT_PRIORITY_LOW);
// Set io_err to INVALID_ERR_HNDL
// We are making sure that this function
// handles a INVALID_ERR_HNDL being passed, and that we can't verify if
// an error occurred by checking anything. (It will just cause
// a TLB exception)
addCalloutToErrl(INVALID_ERR_HNDL, ERRL_CALLOUT_TYPE_HUID, 0, ERRL_CALLOUT_PRIORITY_LOW);
/****************************************************/
// Test addUsrDtlsToErrl with incorrect parameter
// Create a log
l_errlHnd = createErrl(TEST_MODULE_ID, 0x08, OCC_NO_EXTENDED_RC, ERRL_SEV_PREDICTIVE, NULL, 0, 0x01, 0x02);
CHECK_CONDITION( l_errlHnd != INVALID_ERR_HNDL, l_rc);
// io_err = NULL
// We are making sure that this function
// handles a NULL being passed, and that we can't verify if
// an error occurred by checking anything. (It will just cause
// a TLB exception)
addUsrDtlsToErrl(NULL, l_dataPtr, 10, ERRL_USR_DTL_STRUCT_VERSION_1, ERRL_USR_DTL_TRACE_DATA);
// io_err = INVALID_ERR_HNDL
// We are making sure that this function
// handles a INVALID_ERR_HNDL being passed, and that we can't verify if
// an error occurred by checking anything. (It will just cause
// a TLB exception)
addUsrDtlsToErrl(INVALID_ERR_HNDL, l_dataPtr, 10, ERRL_USR_DTL_STRUCT_VERSION_1, ERRL_USR_DTL_TRACE_DATA);
// i_dataPtr = NULL so entry size doesn't change
l_entrySizeBefore = l_errlHnd->iv_userDetails.iv_entrySize;
addUsrDtlsToErrl(l_errlHnd, NULL, 10, ERRL_USR_DTL_STRUCT_VERSION_1, ERRL_USR_DTL_TRACE_DATA);
l_entrySizeAfter = l_errlHnd->iv_userDetails.iv_entrySize;
CHECK_CONDITION( l_entrySizeBefore == l_entrySizeAfter, l_rc);
// i_size = 0 so so entry size doesn't change
l_entrySizeBefore = l_errlHnd->iv_userDetails.iv_entrySize;
addUsrDtlsToErrl(l_errlHnd, l_dataPtr, 0, ERRL_USR_DTL_STRUCT_VERSION_1, ERRL_USR_DTL_TRACE_DATA);
l_entrySizeAfter = l_errlHnd->iv_userDetails.iv_entrySize;
CHECK_CONDITION( l_entrySizeBefore == l_entrySizeAfter, l_rc);
// test addUsrDtlsToErrl after log is committed so entry size doesn't change
l_errlHndx = l_errlHnd;
commitErrl(&l_errlHnd);
l_entrySizeBefore = l_errlHndx->iv_userDetails.iv_entrySize;
addUsrDtlsToErrl(l_errlHndx, l_dataPtr, 10, ERRL_USR_DTL_STRUCT_VERSION_1, ERRL_USR_DTL_TRACE_DATA);
l_entrySizeAfter = l_errlHndx->iv_userDetails.iv_entrySize;
CHECK_CONDITION( l_entrySizeBefore == l_entrySizeAfter, l_rc);
deleteErrl(&l_errlHndx);
CHECK_CONDITION( l_errlHndx == NULL, l_rc);
/****************************************************/
// Test setErrlSevToInfo with incorrect parameter
// Set io_err to NULL.
// We are making sure that this function
// handles a NULL being passed, and that we can't verify if
// an error occurred by checking anything. (It will just cause
// a TLB exception)
setErrlSevToInfo(NULL);
// Set io_err to INVALID_ERR_HNDL
// We are making sure that this function
// handles a INVALID_ERR_HNDL being passed, and that we can't verify if
// an error occurred by checking anything. (It will just cause
// a TLB exception)
setErrlSevToInfo(INVALID_ERR_HNDL);
}while(0);
return l_rc;
}
//////////////////////////
// Function Specification
//
// Name: amec_gpu_pcap
//
// Description: Determine power cap for GPUs
//
// Thread: Real Time Loop
//
// End Function Specification
void amec_gpu_pcap(bool i_oversubscription, bool i_active_pcap_changed, int32_t i_avail_power)
{
/*------------------------------------------------------------------------*/
/* Local Variables */
/*------------------------------------------------------------------------*/
uint8_t i = 0;
uint32_t l_gpu_cap_mw = 0;
uint16_t l_system_gpu_total_pcap = 0; // total GPU pcap required by system based on if currently in oversub or not
static uint16_t L_total_gpu_pcap = 0; // Current total GPU pcap in effect
static uint16_t L_n_plus_1_mode_gpu_total_pcap = 0; // Total GPU pcap required for N+1 (not in oversubscription)
static uint16_t L_n_mode_gpu_total_pcap = 0; // Total GPU pcap required for oversubscription
static uint16_t L_active_psr_gpu_total_pcap = 0; // Total GPU pcap for the currently set pcap and PSR
static uint16_t L_per_gpu_pcap = 0; // Amount of L_total_gpu_pcap for each GPU
static uint8_t L_psr = 100; // PSR value used in L_active_psr_gpu_total_pcap calculation
static bool L_first_run = TRUE; // for calculations done only 1 time
static uint32_t L_last_pcap_traced[MAX_NUM_GPU_PER_DOMAIN] = {0};
/*------------------------------------------------------------------------*/
/* Code */
/*------------------------------------------------------------------------*/
// If this is the first time running calculate the total GPU power cap for system power caps (N and N+1)
if(L_first_run)
{
// calculate total GPU power cap for oversubscription
if(g_amec->pcap.ovs_node_pcap > G_sysConfigData.total_non_gpu_max_pwr_watts)
{
// Take all non-GPU power away from the oversubscription power cap
L_n_mode_gpu_total_pcap = g_amec->pcap.ovs_node_pcap - G_sysConfigData.total_non_gpu_max_pwr_watts;
// Add back in the power that will be dropped by processor DVFS and memory throttling and give to GPUs
L_n_mode_gpu_total_pcap += G_sysConfigData.total_proc_mem_pwr_drop_watts;
}
else
{
// This should not happen, the total non GPU power should never be higher than the N mode cap
// Log error and set GPUs to minimum power cap
L_n_mode_gpu_total_pcap = 0; // this will set minimum GPU power cap
TRAC_ERR("amec_gpu_pcap: non GPU max power %dW is more than N mode pwr limit %dW",
G_sysConfigData.total_non_gpu_max_pwr_watts, g_amec->pcap.ovs_node_pcap);
/* @
* @errortype
* @moduleid AMEC_GPU_PCAP_MID
* @reasoncode GPU_FAILURE
* @userdata1 N mode Power Cap watts
* @userdata2 Total non-GPU power watts
* @userdata4 ERC_GPU_N_MODE_PCAP_CALC_FAILURE
* @devdesc Total non-GPU power more than N mode power cap
*
*/
errlHndl_t l_err = createErrl(AMEC_GPU_PCAP_MID,
GPU_FAILURE,
ERC_GPU_N_MODE_PCAP_CALC_FAILURE,
ERRL_SEV_PREDICTIVE,
NULL,
DEFAULT_TRACE_SIZE,
g_amec->pcap.ovs_node_pcap,
G_sysConfigData.total_non_gpu_max_pwr_watts);
//Callout firmware
addCalloutToErrl(l_err,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_HIGH);
commitErrl(&l_err);
}
// calculate total GPU power cap for N+1 (not in oversubscription)
if(G_sysConfigData.pcap.system_pcap > G_sysConfigData.total_non_gpu_max_pwr_watts)
{
// Take all non-GPU power away from the N+1 power cap
L_n_plus_1_mode_gpu_total_pcap = G_sysConfigData.pcap.system_pcap - G_sysConfigData.total_non_gpu_max_pwr_watts;
// Add back in the power that will be dropped by processor DVFS and memory throttling and give to GPUs
L_n_plus_1_mode_gpu_total_pcap += G_sysConfigData.total_proc_mem_pwr_drop_watts;
}
else
{
// This should not happen, the total non GPU power should never be higher than the N+1 mode cap
// Log error and set GPUs to minimum power cap
L_n_plus_1_mode_gpu_total_pcap = 0; // this will set minimum GPU power cap
TRAC_ERR("amec_gpu_pcap: non GPU max power %dW is more than N+1 mode pwr limit %dW",
G_sysConfigData.total_non_gpu_max_pwr_watts, G_sysConfigData.pcap.system_pcap);
/* @
* @errortype
* @moduleid AMEC_GPU_PCAP_MID
* @reasoncode GPU_FAILURE
* @userdata1 N+1 mode Power Cap watts
* @userdata2 Total non-GPU power watts
* @userdata4 ERC_GPU_N_PLUS_1_MODE_PCAP_CALC_FAILURE
* @devdesc Total non-GPU power more than N+1 mode power cap
*
*/
errlHndl_t l_err = createErrl(AMEC_GPU_PCAP_MID,
GPU_FAILURE,
ERC_GPU_N_PLUS_1_MODE_PCAP_CALC_FAILURE,
ERRL_SEV_PREDICTIVE,
NULL,
DEFAULT_TRACE_SIZE,
G_sysConfigData.pcap.system_pcap,
G_sysConfigData.total_non_gpu_max_pwr_watts);
//Callout firmware
addCalloutToErrl(l_err,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_HIGH);
commitErrl(&l_err);
}
} // if first run
// Calculate the total GPU power cap for the current active limit and PSR
// this only needs to be calculated if either the active limit or PSR changed
if( (L_first_run) || (i_active_pcap_changed) || (L_psr != G_sysConfigData.psr) )
{
L_psr = G_sysConfigData.psr;
if(g_amec->pcap.active_node_pcap > G_sysConfigData.total_non_gpu_max_pwr_watts)
{
// Take all non-GPU power away from the active power cap
L_active_psr_gpu_total_pcap = g_amec->pcap.active_node_pcap - G_sysConfigData.total_non_gpu_max_pwr_watts;
// Add back in the power that will be dropped by processor DVFS and memory throttling based on the PSR
// to give to GPUs
L_active_psr_gpu_total_pcap += ( (L_psr / 100) * G_sysConfigData.total_proc_mem_pwr_drop_watts );
}
else
{
// Set GPUs to minimum power cap
L_active_psr_gpu_total_pcap = 0;
TRAC_IMP("amec_gpu_pcap: non GPU max power %dW is more than active pwr limit %dW",
G_sysConfigData.total_non_gpu_max_pwr_watts, g_amec->pcap.active_node_pcap);
}
// Total GPU power cap is the lower of system (N+1 or oversubscription depending on if in oversub)
// and the active power limit. We do not need to always account for oversubscription since
// the automatic hw power brake will assert to the GPUs if there is a problem when oversub is
// entered from the time OCC can set and GPUs react to a new power limit
if(i_oversubscription)
{
// system in oversubscription use N mode cap
l_system_gpu_total_pcap = L_n_mode_gpu_total_pcap;
}
else
{
// system is not in oversubscription use N+1 mode cap
l_system_gpu_total_pcap = L_n_plus_1_mode_gpu_total_pcap;
}
L_total_gpu_pcap = (l_system_gpu_total_pcap < L_active_psr_gpu_total_pcap) ?
l_system_gpu_total_pcap : L_active_psr_gpu_total_pcap;
// Divide the total equally across all GPUs in the system
if(G_first_num_gpus_sys)
{
L_per_gpu_pcap = L_total_gpu_pcap / G_first_num_gpus_sys;
}
else
{
L_per_gpu_pcap = 0;
TRAC_ERR("amec_gpu_pcap: Called with no GPUs present!");
}
}
// Setup to send new power limit to GPUs. The actual sending of GPU power limit will be handled by task_gpu_sm()
for (i=0; i<MAX_NUM_GPU_PER_DOMAIN; i++)
{
// Before sending a GPU a power limit the power limits must be read from the GPU to know min/max GPU allows
if( GPU_PRESENT(i) && g_amec->gpu[i].pcap.pwr_limits_read )
{
l_gpu_cap_mw = L_per_gpu_pcap * 1000; // convert W to mW
// GPU is present and have min/max power limits from GPU
// clip the GPU power limit to min/max GPU limit if needed
if(l_gpu_cap_mw < g_amec->gpu[i].pcap.gpu_min_pcap_mw) // clip to min?
{
l_gpu_cap_mw = g_amec->gpu[i].pcap.gpu_min_pcap_mw;
}
else if(l_gpu_cap_mw > g_amec->gpu[i].pcap.gpu_max_pcap_mw) // clip to max?
{
l_gpu_cap_mw = g_amec->gpu[i].pcap.gpu_max_pcap_mw;
}
// check if this is a new power limit
if(g_amec->gpu[i].pcap.gpu_desired_pcap_mw != l_gpu_cap_mw)
{
if( (g_amec->gpu[i].pcap.gpu_desired_pcap_mw != 0) ||
(L_last_pcap_traced[i] != l_gpu_cap_mw) )
{
L_last_pcap_traced[i] = l_gpu_cap_mw;
TRAC_IMP("amec_gpu_pcap: Updating GPU%d desired pcap %dmW to %dmW", i,
g_amec->gpu[i].pcap.gpu_desired_pcap_mw, l_gpu_cap_mw);
}
g_amec->gpu[i].pcap.gpu_desired_pcap_mw = l_gpu_cap_mw;
}
}
} // for each GPU
L_first_run = FALSE;
}
// Function Specification
//
// Name: proc_gpsm_dcm_sync_enable_pstates_smh
//
// Description: Step through all the states & synch needed to enable
// Pstates on both master & slave on a DCM. This also
// works for a SCM, which will act as DCM master (as far
// as this function is concerned.)
//
// End Function Specification
void proc_gpsm_dcm_sync_enable_pstates_smh(void)
{
// Static Locals
static GpsmEnablePstatesMasterInfo l_master_info;
static Pstate l_voltage_pstate, l_freq_pstate;
// Local Variables
int l_rc = 0;
errlHndl_t l_errlHndl = NULL;
if(!gpsm_dcm_slave_p())
{
// ---------------------------------------
// SCM or DCM Master
// ---------------------------------------
switch( G_proc_dcm_sync_state.sync_state_master )
{
case PROC_GPSM_SYNC_NO_PSTATE_TABLE:
// Waiting for Pstate Table from TMGT
break;
case PROC_GPSM_SYNC_PSTATE_TABLE_INSTALLED:
PROC_DBG("GPST DCM Master State %d\n",G_proc_dcm_sync_state.sync_state_master);
// DCM SYNC (MasterWaitForSlave): Wait for slave to install Pstate table
if(gpsm_dcm_mode_p()){
if( G_proc_dcm_sync_state.sync_state_slave == PROC_GPSM_SYNC_PSTATE_TABLE_INSTALLED)
{
// Move to next state in state machine
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_READY_TO_ENABLE_MASTER;
}
}
else
{
// Move to next state in state machine
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_READY_TO_ENABLE_MASTER;
}
break;
case PROC_GPSM_SYNC_READY_TO_ENABLE_MASTER:
PROC_DBG("GPST DCM Master State %d\n",G_proc_dcm_sync_state.sync_state_master);
// Pstate tables has been installed, so now Master can start to enable Pstates
l_rc = gpsm_enable_pstates_master(&l_master_info, &l_voltage_pstate, &l_freq_pstate);
if(l_rc)
{
// Error
TRAC_ERR("MSTR: gpsm_enable_pstates_master failed with rc=0x%08x", l_rc);
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_PSTATE_ERROR;
break;
}
TRAC_IMP("MSTR: Initial Pstates: V: %d, F: %d\n",l_voltage_pstate, l_freq_pstate);
// DCM SYNC (Master2Slave): Send V & F Pstate to slave
G_proc_dcm_sync_state.dcm_pair_id = G_pob_id.chip_id;
G_proc_dcm_sync_state.pstate_v = l_voltage_pstate;
G_proc_dcm_sync_state.pstate_f = l_freq_pstate;
// Move to next state in state machine
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_PSTATE_MASTER_ENABLED;
break;
case PROC_GPSM_SYNC_PSTATE_MASTER_ENABLED:
PROC_DBG("GPST DCM Master State %d\n",G_proc_dcm_sync_state.sync_state_master);
// DCM SYNC (MasterWaitForSlave): Wait for slave to complete gpsm_enable_pstates_slave()
if(gpsm_dcm_mode_p()){
if( G_proc_dcm_sync_state.sync_state_slave == PROC_GPSM_SYNC_PSTATE_SLAVE_ENABLED)
{
// Move to next state in state machine
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_READY_TO_ENABLE_SLAVE;
}
}
else
{
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_READY_TO_ENABLE_SLAVE;
}
break;
case PROC_GPSM_SYNC_READY_TO_ENABLE_SLAVE:
PROC_DBG("GPST DCM Master State %d\n",G_proc_dcm_sync_state.sync_state_master);
// Master does next step of enabling Pstates, now that slave has done it's enable
l_rc = gpsm_enable_pstates_slave(&l_master_info, l_voltage_pstate, l_freq_pstate);
if(l_rc)
{
// Error
TRAC_ERR("MSTR: gpsm_enable_pstates_slave failed with rc=0x%08x", l_rc);
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_PSTATE_ERROR;
break;
}
TRAC_INFO("MSTR: Completed DCM Pstate Slave Init\n");
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_PSTATE_SLAVE_ENABLED;
break;
case PROC_GPSM_SYNC_PSTATE_SLAVE_ENABLED:
PROC_DBG("GPST DCM Master State %d\n",G_proc_dcm_sync_state.sync_state_master);
// Master puts this chip in Pstate HW mode
l_rc = gpsm_hw_mode();
if(l_rc)
{
// Error
TRAC_ERR("MSTR: gpsm_hw_mode failed with rc=0x%08x", l_rc);
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_PSTATE_ERROR;
break;
}
// DCM SYNC (Master2Slave): Tell Slave Master has entered HW mmode
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_PSTATE_HW_MODE;
break;
case PROC_GPSM_SYNC_PSTATE_HW_MODE:
PROC_DBG("GPST DCM Master State %d\n",G_proc_dcm_sync_state.sync_state_master);
// DCM SYNC (Master2Slave): Wait for Slave to Enter HW Mode
if(gpsm_dcm_mode_p()){
if( G_proc_dcm_sync_state.sync_state_slave == PROC_GPSM_SYNC_PSTATE_HW_MODE)
{
TRAC_INFO("MSTR: Completed DCM Pstate Enable");
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_PSTATE_HW_MODE_ENABLED;
//do additional setup if in kvm mode
proc_pstate_kvm_setup();
}
}
else
{
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_PSTATE_HW_MODE_ENABLED;
TRAC_INFO("MSTR: Completed SCM Pstate Enable");
//do additional setup if in kvm mode
proc_pstate_kvm_setup();
}
break;
case PROC_GPSM_SYNC_PSTATE_HW_MODE_ENABLED:
// Final State
// Pstates Enabled on both modules in DCM
break;
case PROC_GPSM_SYNC_PSTATE_ERROR:
// Do nothing, something will have to come and kick us out of this state
break;
default:
G_proc_dcm_sync_state.sync_state_master = PROC_GPSM_SYNC_NO_PSTATE_TABLE;
break;
}
}
else if (gpsm_dcm_slave_p())
{
// ---------------------------------------
// DCM Slave
// - Don't need to check if DCM, since we can't come in here unless DCM
// ---------------------------------------
switch( G_proc_dcm_sync_state.sync_state_slave)
{
case PROC_GPSM_SYNC_NO_PSTATE_TABLE:
// Waiting for Pstate Table from TMGT
break;
case PROC_GPSM_SYNC_PSTATE_TABLE_INSTALLED:
// Pstate table has been installed, but slave needs to wait
// for master before it can do anything else.
// DCM SYNC (SlaveWaitForMaster): Send V & F Pstate to slave
// Wait for Master to complete gpsm_enable_pstates_master()
// before running gpsm_enable_pstates_slave()
if( G_proc_dcm_sync_state.sync_state_master == PROC_GPSM_SYNC_PSTATE_MASTER_ENABLED)
{
// Go to next state
G_proc_dcm_sync_state.sync_state_slave = PROC_GPSM_SYNC_PSTATE_MASTER_ENABLED;
}
break;
case PROC_GPSM_SYNC_PSTATE_MASTER_ENABLED:
PROC_DBG("GPST DCM Slave State %d\n",G_proc_dcm_sync_state.sync_state_slave);
// Read the initial Pstates from the data DCM master sent
l_voltage_pstate = G_proc_dcm_sync_state.pstate_v;
l_freq_pstate = G_proc_dcm_sync_state.pstate_f;
// NULL is passed to this function when run on dcm slave
l_rc = gpsm_enable_pstates_slave(NULL, l_voltage_pstate, l_freq_pstate);
if(l_rc)
{
// Error
TRAC_ERR("SLV: gpsm_enable_pstates_slave failed with rc=0x%08x", l_rc);
G_proc_dcm_sync_state.sync_state_slave = PROC_GPSM_SYNC_PSTATE_ERROR;
break;
}
TRAC_INFO("SLV: Completed DCM Pstate Slave Init\n");
// DCM SYNC (Slave2Master):
// Tell Master that slave has run gpsm_enable_pstates_slave()
// Go to next state
G_proc_dcm_sync_state.sync_state_slave = PROC_GPSM_SYNC_PSTATE_SLAVE_ENABLED;
break;
case PROC_GPSM_SYNC_PSTATE_SLAVE_ENABLED:
// DCM SYNC (SlaveWaitForMaster): Wait for Master to run gpsm_hw_mode
if( G_proc_dcm_sync_state.sync_state_master == PROC_GPSM_SYNC_PSTATE_HW_MODE)
{
// Enter Pstate HW mode
l_rc = gpsm_hw_mode();
if(l_rc)
{
// Error
TRAC_ERR("SLV: gpsm_hw_mode failed with rc=0x%08x", l_rc);
G_proc_dcm_sync_state.sync_state_slave = PROC_GPSM_SYNC_PSTATE_ERROR;
break;
}
// DCM SYNC (Slave2Master): Tell master that DCM slave made it to HW mode
// Go to next state
G_proc_dcm_sync_state.sync_state_slave = PROC_GPSM_SYNC_PSTATE_HW_MODE;
}
break;
case PROC_GPSM_SYNC_PSTATE_HW_MODE:
// Slave & Master now both know each other has HW mode enabled
if( G_proc_dcm_sync_state.sync_state_master == PROC_GPSM_SYNC_PSTATE_HW_MODE_ENABLED)
{
G_proc_dcm_sync_state.sync_state_slave = PROC_GPSM_SYNC_PSTATE_HW_MODE_ENABLED;
TRAC_INFO("SLV: Completed DCM Pstate Enable");
//do additional setup if in kvm mode
proc_pstate_kvm_setup();
}
break;
case PROC_GPSM_SYNC_PSTATE_HW_MODE_ENABLED:
// Final State
// Pstates Enabled on both modules in DCM
break;
case PROC_GPSM_SYNC_PSTATE_ERROR:
// Do nothing, something will have to come and kick us out of this state
break;
default:
G_proc_dcm_sync_state.sync_state_slave = PROC_GPSM_SYNC_NO_PSTATE_TABLE;
break;
}
}
// If we are in the process of running through the state machine,
// we will do a sem_post to speed up the DCOM Thread and step us
// through faster.
if( PROC_GPSM_SYNC_NO_PSTATE_TABLE != proc_gpsm_dcm_sync_get_my_state()
&& !proc_is_hwpstate_enabled() )
{
ssx_semaphore_post(&G_dcomThreadWakeupSem);
}
// If we broke out of loops above because of an error, create an
// error log and return it to caller.
if(l_rc)
{
/* @
* @errortype
* @moduleid PROC_ENABLE_PSTATES_SMH_MOD
* @reasoncode SSX_GENERIC_FAILURE
* @userdata1 SRAM Address of the Pstate Table
* @userdata2 Return Code of call that failed
* @userdata4 OCC_NO_EXTENDED_RC
* @devdesc Failed to install Pstate Table
*/
l_errlHndl = createErrl(
PROC_ENABLE_PSTATES_SMH_MOD, //modId
SSX_GENERIC_FAILURE, //reasoncode
OCC_NO_EXTENDED_RC, //Extended reason code
ERRL_SEV_PREDICTIVE, //Severity
NULL, //TODO: create trace //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
(uint32_t) &G_global_pstate_table, //userdata1
l_rc); //userdata2
addCalloutToErrl(l_errlHndl,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_HIGH);
addCalloutToErrl(l_errlHndl,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.proc_huid,
ERRL_CALLOUT_PRIORITY_LOW);
REQUEST_RESET(l_errlHndl);
}
return;
}
// Function Specification
//
// Name: proc_pstate_kvm_setup
//
// Description: Get everything set up for KVM mode
//
// End Function Specification
void proc_pstate_kvm_setup()
{
int l_core;
int l_rc = 0;
uint32_t l_configured_cores;
pcbs_pcbspm_mode_reg_t l_ppmr;
pcbs_pmgp1_reg_t l_pmgp1;
pcbs_power_management_bounds_reg_t l_pmbr;
errlHndl_t l_errlHndl;
do
{
//only run this in KVM mode
if(!G_sysConfigData.system_type.kvm)
{
break;
}
l_configured_cores = ~in32(PMC_CORE_DECONFIGURATION_REG);
// Do per-core configuration
for(l_core = 0; l_core < PGP_NCORES; l_core++, l_configured_cores <<= 1)
{
if(!(l_configured_cores & 0x80000000)) continue;
//do read-modify-write to allow pmax clip to also clip voltage (not just frequency)
l_rc = getscom_ffdc(CORE_CHIPLET_ADDRESS(PCBS_PCBSPM_MODE_REG, l_core),
&(l_ppmr.value), NULL); //commit errors internally
if(l_rc)
{
TRAC_ERR("proc_pstate_kvm_setup: getscom(PCBS_PCBSPM_MODE_REG) failed. rc=%d, hw_core=%d",
l_rc, l_core);
break;
}
l_ppmr.fields.enable_clipping_of_global_pstate_req = 1;
l_rc = putscom_ffdc(CORE_CHIPLET_ADDRESS(PCBS_PCBSPM_MODE_REG, l_core),
l_ppmr.value, NULL); //commit errors internally
if(l_rc)
{
TRAC_ERR("proc_pstate_kvm_setup: putscom(PCBS_PCBSPM_MODE_REG) failed. rc=%d, hw_core=%d",
l_rc, l_core);
break;
}
//per Vaidy Srinivasan, clear bit 11 in the Power Management GP1 register
l_pmgp1.value = 0;
l_pmgp1.fields.pm_spr_override_en = 1;
l_rc = putscom_ffdc(CORE_CHIPLET_ADDRESS(PCBS_PMGP1_REG_AND, l_core),
~l_pmgp1.value, NULL); //commit errors internally
if(l_rc)
{
TRAC_ERR("proc_pstate_kvm_setup: putscom(PCBS_PMGB1_REG_OR) failed. rc=0x%08x, hw_core=%d",
l_rc, l_core);
break;
}
//set pmax/pmin clip initial settings
l_pmbr.value = 0;
l_pmbr.fields.pmin_clip = gpst_pmin(&G_global_pstate_table)+1; //Per David Du, we must use pmin+1 to avoid gpsa hang
l_pmbr.fields.pmax_clip = gpst_pmax(&G_global_pstate_table);
l_rc = putscom_ffdc(CORE_CHIPLET_ADDRESS(PCBS_POWER_MANAGEMENT_BOUNDS_REG, l_core),
l_pmbr.value, NULL); //commit errors internally
if(l_rc)
{
TRAC_ERR("proc_pstate_kvm_setup: putscom(PCBS_POWER_MANAGEMENT_BOUNDS_REG) failed. rc=0x%08x, hw_core=%d",
l_rc, l_core);
break;
}
}// end of per-core config
if(l_rc)
{
break;
}
// Set the voltage clipping register to match the pmax/pmin clip values set above.
pmc_rail_bounds_register_t prbr;
prbr.value = in32(PMC_RAIL_BOUNDS_REGISTER);
prbr.fields.pmin_rail = gpst_pmin(&G_global_pstate_table);
prbr.fields.pmax_rail = gpst_pmax(&G_global_pstate_table);
TRAC_IMP("pmin clip pstate = %d, pmax clip pstate = %d", prbr.fields.pmin_rail, prbr.fields.pmax_rail);
out32(PMC_RAIL_BOUNDS_REGISTER, prbr.value);
// Initialize the sapphire table in SRAM (sets valid bit)
populate_pstate_to_sapphire_tbl();
// copy sram image into mainstore HOMER
populate_sapphire_tbl_to_mem();
TRAC_IMP("proc_pstate_kvm_setup: RUNNING IN KVM MODE");
}while(0);
if(l_rc)
{
// Create Error Log and request reset
/* @
* @errortype
* @moduleid PROC_PSTATE_KVM_SETUP_MOD
* @reasoncode PROC_SCOM_ERROR
* @userdata1 l_configured_cores
* @userdata2 Return Code of call that failed
* @userdata4 OCC_NO_EXTENDED_RC
* @devdesc OCC failed to scom a core register
*/
l_errlHndl = createErrl(
PROC_PSTATE_KVM_SETUP_MOD, //modId
PROC_SCOM_ERROR, //reasoncode
OCC_NO_EXTENDED_RC, //Extended reason code
ERRL_SEV_PREDICTIVE, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
l_configured_cores, //userdata1
l_rc //userdata2
);
addCalloutToErrl(l_errlHndl,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.proc_huid,
ERRL_CALLOUT_PRIORITY_HIGH);
addCalloutToErrl(l_errlHndl,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_MED);
REQUEST_RESET(l_errlHndl);
}
}
// Function Specification
//
// Name: proc_gpsm_pstate_initialize
//
// Description: Initialize Pstate Table (and the rest of the Pstate
// SuperStructure). Also, initialize Global variables
// that will speed up the proc_freq2pstate function.
//
// End Function Specification
errlHndl_t proc_gpsm_pstate_initialize(const PstateSuperStructure* i_pss)
{
errlHndl_t l_errlHndl = NULL;
GlobalPstateTable * l_gpst_ptr = NULL;
int l_rc = 0;
do
{
/// Because early EC's of the Murano chip did not have valid #V data,
/// we need to exclude them from loading a pstate table created by a
/// hardware procedure. If we run a table created from a #V on these
/// chips, we could crash the box (or worse, burn something up!)
if ( (cfam_id() == CFAM_CHIP_ID_MURANO_10)
|| (cfam_id() == CFAM_CHIP_ID_MURANO_11) )
{
TRAC_ERR("OCC not supported on murano dd10 or dd11 due to bad #V data. chip id = 0x%08x");
// Create Error Log and return to caller
/* @
* @errortype
* @moduleid PROC_GPST_INIT_FAILURE_MOD
* @reasoncode INTERNAL_FAILURE
* @userdata1 chip id
* @userdata2 0
* @userdata4 OCC_NO_EXTENDED_RC
* @devdesc OCC not supported on Murano DD10 or DD11
*/
l_errlHndl = createErrl(
PROC_GPST_INIT_FAILURE_MOD, //modId
INTERNAL_FAILURE, //reasoncode
OCC_NO_EXTENDED_RC, //Extended reason code
ERRL_SEV_UNRECOVERABLE, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
cfam_id(), //userdata1
0 //userdata2
);
//callout the processor
addCalloutToErrl(l_errlHndl,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.proc_huid,
ERRL_CALLOUT_PRIORITY_HIGH);
break;
}
l_rc = gpsm_initialize(i_pss, &G_global_pstate_table);
// Print key elements of table for debug
proc_trace_pstate_table_quick();
// Get Pstate Table Ptr
l_gpst_ptr = gpsm_gpst();
if(l_rc || (l_gpst_ptr != &G_global_pstate_table))
{
TRAC_ERR("gpsm_initialize failed with rc=0x%08x or l_gpstr_ptr=0x%08x", l_rc, l_gpst_ptr);
// Create Error Log and return to caller
/* @
* @errortype
* @moduleid PROC_GPST_INIT_FAILURE_MOD
* @reasoncode INTERNAL_FAILURE
* @userdata1 SRAM Address of the Pstate Table
* @userdata2 Return Code of call that failed
* @userdata4 ERC_PROC_PSTATE_INSTALL_FAILURE
* @devdesc Failed to install Pstate Table
*/
l_errlHndl = createErrl(
PROC_GPST_INIT_FAILURE_MOD, //modId
INTERNAL_FAILURE, //reasoncode
ERC_PROC_PSTATE_INSTALL_FAILURE, //Extended reason code
ERRL_SEV_UNRECOVERABLE, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
(uint32_t) &G_global_pstate_table, //userdata1
l_rc //userdata2
);
addCalloutToErrl(l_errlHndl,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.proc_huid,
ERRL_CALLOUT_PRIORITY_HIGH);
addCalloutToErrl(l_errlHndl,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_MED);
break;
}
// set up key globals based on the pstate table.
// Set the pstate state (state machine will start enabling pstates
// when it sees this)
proc_gpsm_dcm_sync_set_state(PROC_GPSM_SYNC_PSTATE_TABLE_INSTALLED);
// Set up Key Globals for use by proc_freq2pstate functions
G_proc_gpst_fmax = l_gpst_ptr->pstate0_frequency_khz
+ (((int8_t) l_gpst_ptr->pmin + l_gpst_ptr->entries - 1)
* l_gpst_ptr->frequency_step_khz);
G_proc_gpst_fmin = l_gpst_ptr->pstate0_frequency_khz
+ (((int8_t) l_gpst_ptr->pmin)
* l_gpst_ptr->frequency_step_khz);
G_proc_gpst_pmax = l_gpst_ptr->pmin + l_gpst_ptr->entries - 1;
// Dcom uses this to know whether to pass DCM msgs or not.
G_isDcm = gpsm_dcm_mode_p();
// Set globals used by amec for pcap calculation
G_mhz_per_pstate = (l_gpst_ptr->frequency_step_khz)/1000;
}while(0);
return l_errlHndl;
}
// Function Specification
//
// Name: populate_sapphire_tbl_to_mem
//
// Description:
//
// End Function Specification
void populate_sapphire_tbl_to_mem()
{
int l_ssxrc = SSX_OK;
uint32_t l_reasonCode = 0;
uint32_t l_extReasonCode = 0;
do
{
#define SAPPHIRE_OFFSET_IN_HOMER 0x001F8000
BceRequest pba_copy;
// Set up copy request
l_ssxrc = bce_request_create(&pba_copy, // block copy object
&G_pba_bcue_queue, // sram to mainstore copy engine
SAPPHIRE_OFFSET_IN_HOMER, // mainstore address
(uint32_t) &G_sapphire_table, // sram starting address
(size_t) sizeof(G_sapphire_table), // size of copy
SSX_WAIT_FOREVER, // no timeout
NULL, // call back
NULL, // call back arguments
ASYNC_REQUEST_BLOCKING // callback mask
);
if(l_ssxrc != SSX_OK)
{
TRAC_ERR("populate_sapphire_tbl_to_mem: PBA request create failure rc=[%08X]", -l_ssxrc);
/*
* @errortype
* @moduleid MAIN_STATE_TRANSITION_MID
* @reasoncode SSX_GENERIC_FAILURE
* @userdata1 RC for PBA block-copy engine
* @userdata4 ERC_BCE_REQUEST_CREATE_FAILURE
* @devdesc SSX BCE related failure
*/
l_reasonCode = SSX_GENERIC_FAILURE;
l_extReasonCode = ERC_BCE_REQUEST_CREATE_FAILURE;
break;
}
// Do actual copying
l_ssxrc = bce_request_schedule(&pba_copy);
if(l_ssxrc != SSX_OK)
{
TRAC_ERR("populate_sapphire_tbl_to_mem: PBA request schedule failure rc=[%08X]", -l_ssxrc);
/*
* @errortype
* @moduleid MAIN_STATE_TRANSITION_MID
* @reasoncode SSX_GENERIC_FAILURE
* @userdata1 RC for PBA block-copy engine
* @userdata4 ERC_BCE_REQUEST_SCHEDULE_FAILURE
* @devdesc Failed to copy data by using DMA
*/
l_reasonCode = SSX_GENERIC_FAILURE;
l_extReasonCode = ERC_BCE_REQUEST_SCHEDULE_FAILURE;
break;
}
} while(0);
if ( l_ssxrc != SSX_OK )
{
errlHndl_t l_errl = createErrl(MAIN_STATE_TRANSITION_MID, //modId
l_reasonCode, //reasoncode
l_extReasonCode, //Extended reason code
ERRL_SEV_UNRECOVERABLE, //Severity
NULL, //Trace Buf
0, //Trace Size
-l_ssxrc, //userdata1
0); //userdata2
// Callout firmware
addCalloutToErrl(l_errl,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_HIGH);
commitErrl(&l_errl);
}
}
// Function Specification
//
// Name: SMGR_set_mode
//
// Description:
//
// End Function Specification
errlHndl_t SMGR_set_mode(const OCC_MODE i_mode,
const uint8_t i_sms_type)
{
errlHndl_t l_errlHndl = NULL;
int jj=0;
OCC_MODE l_mode = i_mode;
do
{
// Get lock for critical section
if(ssx_semaphore_pend(&G_smgrModeChangeSem,SSX_WAIT_FOREVER))
{
/* @
* @errortype
* @moduleid MAIN_MODE_TRANSITION_MID
* @reasoncode SSX_GENERIC_FAILURE
* @userdata1 none
* @userdata4 ERC_RUNNING_SEM_PENDING_FAILURE
* @devdesc SSX semaphore related failure
*/
l_errlHndl = createErrl(MAIN_MODE_TRANSITION_MID, //modId
SSX_GENERIC_FAILURE, //reasoncode
ERC_RUNNING_SEM_PENDING_FAILURE,//Extended reason code
ERRL_SEV_UNRECOVERABLE, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
0, //userdata1
0); //userdata2
// Callout firmware
addCalloutToErrl(l_errlHndl,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_HIGH);
break;
}
//Check to see if we need to make a change
if(l_mode == OCC_MODE_NOCHANGE)
{
break;
}
// SAPPHIRE only accepts DPS-FE mode. In case OCC gets other modes, it should accept the request
// and keep reporting back that it is in that mode. However, internally we should not
// initiate any mode transition, i.e., OCC should remain internally in DPS-FE mode.
if(G_sysConfigData.system_type.kvm)
{
G_occ_external_req_mode_kvm = l_mode;
if (l_mode != OCC_MODE_DYN_POWER_SAVE)
{
TRAC_ERR("SAPPHIRE only accepts DPS-FE mode(6) but requested mode is : %d", l_mode);
l_mode = OCC_MODE_DYN_POWER_SAVE;
}
}
switch (l_mode)
{
case OCC_MODE_NOMINAL: // FALL THROUGH
case OCC_MODE_PWRSAVE: // FALL THROUGH
case OCC_MODE_DYN_POWER_SAVE: // FALL THROUGH
case OCC_MODE_DYN_POWER_SAVE_FP: // FALL THROUGH
case OCC_MODE_TURBO: // FALL THROUGH
case OCC_MODE_STURBO: // FALL THROUGH
case OCC_MODE_FFO: // FALL THROUGH
// Notify AMEC of mode change
// Change Mode via Transition Function
do
{
// Loop through mode transition table, and find the state
// transition function that matches the transition we need to do.
for(jj=0; jj<G_smgr_mode_trans_count; jj++)
{
if( ((G_smgr_mode_trans[jj].old_state == G_occ_internal_mode)
|| (G_smgr_mode_trans[jj].old_state == OCC_MODE_ALL) )
&& (G_smgr_mode_trans[jj].new_state == l_mode) )
{
// We found the transtion that matches, now run the function
// that is associated with that state transition.
if(NULL != G_smgr_mode_trans[jj].trans_func_ptr)
{
// Signal that we are now in a mode transition
G_mode_transition_occuring = TRUE;
// Run transition function
l_errlHndl = (G_smgr_mode_trans[jj].trans_func_ptr)();
// Signal that we are done with the transition
G_mode_transition_occuring = FALSE;
break;
}
}
}
// Check if we hit the end of the table without finding a valid
// mode transition. If we did, log an internal error.
if(G_smgr_mode_trans_count == jj)
{
TRAC_ERR("No transition (or NULL) found for the mode change\n");
l_errlHndl = NULL; //TODO: Create Error
break;
}
// Update the power mode for all core groups that are following system mode
AMEC_part_update_sysmode_policy(CURRENT_MODE());
}
while(0);
break;
default:
//unsupported mode
break;
}
if(l_errlHndl)
{
// Punt !!! :-)
break;
}
// Load correct thermal thresholds based on the current mode
l_errlHndl = AMEC_data_write_thrm_thresholds(CURRENT_MODE());
// Update the CPU speed in AME?
// Register the New Mode?
// Update Power Policy Requirements?
// Update CPM Calibration
}while(0);
// If we have a mode change failure, Mode change flag needs to be set,
// otherwise, it needs be be cleared/unset.
if(l_errlHndl)
{
}
// Unlock critical section
ssx_semaphore_post(&G_smgrModeChangeSem);
return l_errlHndl;
}
void task_centaur_control( task_t * i_task )
{
errlHndl_t l_err = NULL; // Error handler
int rc = 0; // Return code
uint32_t l_cent;
amec_centaur_t *l_cent_ptr = NULL;
static uint8_t L_scom_timeout[MAX_NUM_CENTAURS] = {0}; //track # of consecutive failures
static bool L_gpe_scheduled = FALSE;
static uint8_t L_gpe_fail_logged = 0;
static bool L_gpe_idle_traced = FALSE;
static bool L_gpe_had_1_tick = FALSE;
// Pointer to the task data structure
centaur_control_task_t * l_centControlTask =
(centaur_control_task_t *) i_task->data_ptr;
// Pointer to parameter field for GPE request
GpeScomParms * l_parms =
(GpeScomParms *)(l_centControlTask->gpe_req.parameter);
do
{
l_cent = l_centControlTask->curCentaur;
l_cent_ptr = &g_amec->proc[0].memctl[l_cent].centaur;
//First, check to see if the previous GPE request still running
//A request is considered idle if it is not attached to any of the
//asynchronous request queues
if( !(async_request_is_idle(&l_centControlTask->gpe_req.request)) )
{
L_scom_timeout[l_cent]++;
//This can happen due to variability in when the task runs
if(!L_gpe_idle_traced && L_gpe_had_1_tick)
{
TRAC_INFO("task_centaur_control: GPE is still running. cent[%d]", l_cent);
l_centControlTask->traceThresholdFlags |= CENTAUR_CONTROL_GPE_STILL_RUNNING;
L_gpe_idle_traced = TRUE;
}
L_gpe_had_1_tick = TRUE;
break;
}
else
{
//Request is idle
L_gpe_had_1_tick = FALSE;
if(L_gpe_idle_traced)
{
TRAC_INFO("task_centaur_control: GPE completed. cent[%d]", l_cent);
L_gpe_idle_traced = FALSE;
}
}
//check scom status
if(L_gpe_scheduled)
{
if(!async_request_completed(&l_centControlTask->gpe_req.request) || l_parms->rc)
{
if(!(L_gpe_fail_logged & (CENTAUR0_PRESENT_MASK >> l_cent)))
{
// Check if the centaur has a channel checkstop. If it does,
// then do not log any errors. We also don't want to throttle
// a centaur that is in this condition.
if(!(cent_chan_checkstop(l_cent)))
{
L_gpe_fail_logged |= CENTAUR0_PRESENT_MASK >> l_cent;
TRAC_ERR("task_centaur_control: gpe_scom_centaur failed. l_cent=%d rc=%x, index=0x%08x", l_cent, l_parms->rc, l_parms->errorIndex);
/* @
* @errortype
* @moduleid CENT_TASK_CONTROL_MOD
* @reasoncode CENT_SCOM_ERROR
* @userdata1 rc - Return code of scom operation
* @userdata2 index of scom operation that failed
* @userdata4 OCC_NO_EXTENDED_RC
* @devdesc OCC access to centaur failed
*/
l_err = createErrl(
CENT_TASK_CONTROL_MOD, // modId
CENT_SCOM_ERROR, // reasoncode
OCC_NO_EXTENDED_RC, // Extended reason code
ERRL_SEV_PREDICTIVE, // Severity
NULL, // Trace Buf
DEFAULT_TRACE_SIZE, // Trace Size
l_parms->rc, // userdata1
l_parms->errorIndex // userdata2
);
addUsrDtlsToErrl(l_err, //io_err
(uint8_t *) &(l_centControlTask->gpe_req.ffdc), //i_dataPtr,
sizeof(PoreFfdc), //i_size
ERRL_USR_DTL_STRUCT_VERSION_1, //version
ERRL_USR_DTL_BINARY_DATA); //type
//callout the centaur
addCalloutToErrl(l_err,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.centaur_huids[l_cent],
ERRL_CALLOUT_PRIORITY_MED);
//callout the processor
addCalloutToErrl(l_err,
ERRL_CALLOUT_TYPE_HUID,
G_sysConfigData.proc_huid,
ERRL_CALLOUT_PRIORITY_MED);
commitErrl(&l_err);
}
}//if(l_gpe_fail_logged & (CENTAUR0_PRESENT_MASK >> l_cent))
//Request failed. Keep count of failures and request a reset if we reach a
//max retry count
L_scom_timeout[l_cent]++;
if(L_scom_timeout[l_cent] == CENTAUR_CONTROL_SCOM_TIMEOUT)
{
break;
}
}//if(!async_request_completed(&l_centControlTask->gpe_req.request) || l_parms->rc)
else
{
//request completed successfully. reset the timeout.
L_scom_timeout[l_cent] = 0;
}
}//if(L_gpe_scheduled)
// Function Specification
//
// Name: amec_set_freq_range
//
// Description: Set the frequency range for AMEC based on mode only
// NOTE: Any other clipping of frequency should be done in
// amec_slv_proc_voting_box() (called every tick)
// so the CLIP history in poll response will accurately
// show all clipping for the given mode the system is in
// This function will run on mode changes and cnfg_data changes
//
// Thread: RealTime Loop
//
// Task Flags:
//
// End Function Specification
errlHndl_t amec_set_freq_range(const OCC_MODE i_mode)
{
/*------------------------------------------------------------------------*/
/* Local Variables */
/*------------------------------------------------------------------------*/
errlHndl_t l_err = NULL;
uint16_t l_freq_min = 0;
uint16_t l_freq_max = 0;
uint32_t l_temp = 0;
amec_mode_freq_t l_ppm_freq[OCC_INTERNAL_MODE_MAX_NUM] = {{0}};
/*------------------------------------------------------------------------*/
/* Code */
/*------------------------------------------------------------------------*/
// First set to Max Freq Range for this mode
// if no mode set yet default to the full range
if(i_mode == OCC_MODE_NOCHANGE)
{
l_freq_min = G_sysConfigData.sys_mode_freq.table[OCC_MODE_MIN_FREQUENCY];
// Set Max frequency (turbo if wof off, otherwise max possible (ultra turbo)
if( g_amec->wof.wof_disabled || (g_amec->wof.wof_init_state != WOF_ENABLED))
{
l_freq_max = G_sysConfigData.sys_mode_freq.table[OCC_MODE_TURBO];
}
else
{
l_freq_max = G_proc_fmax_mhz;
}
}
else if( VALID_MODE(i_mode) ) // Set to Max Freq Range for this mode
{
l_freq_min = G_sysConfigData.sys_mode_freq.table[OCC_MODE_MIN_FREQUENCY];
// Use max frequency for performance modes and FMF
if( (i_mode == OCC_MODE_NOM_PERFORMANCE) || (i_mode == OCC_MODE_MAX_PERFORMANCE) ||
(i_mode == OCC_MODE_FMF) || (i_mode == OCC_MODE_DYN_POWER_SAVE) ||
(i_mode == OCC_MODE_DYN_POWER_SAVE_FP) )
{
// clip to turbo if WOF is disabled
if( g_amec->wof.wof_disabled || (g_amec->wof.wof_init_state != WOF_ENABLED))
{
l_freq_max = G_sysConfigData.sys_mode_freq.table[OCC_MODE_TURBO];
}
else
{
l_freq_max = G_proc_fmax_mhz;
}
}
else
{
l_freq_max = G_sysConfigData.sys_mode_freq.table[i_mode];
}
}
if( (l_freq_min == 0) || (l_freq_max == 0) )
{
// Do not update amec vars with a 0 frequency.
// The frequency limit for each mode should have been set prior
// to calling or the mode passed was invalid
TRAC_ERR("amec_set_freq_range: Freq of 0 found! mode[0x%02x] Fmin[%u] Fmax[%u]",
i_mode,
l_freq_min,
l_freq_max);
// Log an error if this is PowerVM as this should never happen when OCC
// supports modes
if(!G_sysConfigData.system_type.kvm)
{
/* @
* @errortype
* @moduleid AMEC_SET_FREQ_RANGE
* @reasoncode INTERNAL_FW_FAILURE
* @userdata1 Mode
* @userdata2 0
* @userdata4 ERC_FW_ZERO_FREQ_LIMIT
* @devdesc Fmin or Fmax of 0 found for mode
*/
errlHndl_t l_err = createErrl(AMEC_SET_FREQ_RANGE, //modId
INTERNAL_FW_FAILURE, //reasoncode
ERC_FW_ZERO_FREQ_LIMIT, //Extended reason code
ERRL_SEV_PREDICTIVE, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
i_mode, //userdata1
0); //userdata2
// Callout Firmware
addCalloutToErrl(l_err,
ERRL_CALLOUT_TYPE_COMPONENT_ID,
ERRL_COMPONENT_ID_FIRMWARE,
ERRL_CALLOUT_PRIORITY_LOW
);
}
}
else
{
g_amec->sys.fmin = l_freq_min;
g_amec->sys.fmax = l_freq_max;
TRAC_INFO("amec_set_freq_range: Mode[0x%02x] Fmin[%u] (Pmin 0x%02x) Fmax[%u] (Pmax 0x%02x)",
i_mode,
l_freq_min,
proc_freq2pstate(g_amec->sys.fmin),
l_freq_max,
proc_freq2pstate(g_amec->sys.fmax));
// Now determine the max frequency for the PPM structure
l_ppm_freq[OCC_INTERNAL_MODE_NOM].fmax = G_sysConfigData.sys_mode_freq.table[OCC_MODE_NOMINAL];
l_ppm_freq[OCC_INTERNAL_MODE_DPS].fmax = G_sysConfigData.sys_mode_freq.table[OCC_MODE_DYN_POWER_SAVE];
l_ppm_freq[OCC_INTERNAL_MODE_DPS_MP].fmax = G_sysConfigData.sys_mode_freq.table[OCC_MODE_DYN_POWER_SAVE_FP];
// Determine the min frequency for the PPM structure. This Fmin should
// always be set to the system Fmin
l_ppm_freq[OCC_INTERNAL_MODE_NOM].fmin = G_sysConfigData.sys_mode_freq.table[OCC_MODE_MIN_FREQUENCY];
l_ppm_freq[OCC_INTERNAL_MODE_DPS].fmin = G_sysConfigData.sys_mode_freq.table[OCC_MODE_MIN_FREQUENCY];
l_ppm_freq[OCC_INTERNAL_MODE_DPS_MP].fmin = G_sysConfigData.sys_mode_freq.table[OCC_MODE_MIN_FREQUENCY];
// Determine the min speed allowed for DPS power policies (this is needed
// by the DPS algorithms)
l_temp = (l_ppm_freq[OCC_INTERNAL_MODE_DPS].fmin * 1000)/l_ppm_freq[OCC_INTERNAL_MODE_DPS].fmax;
l_ppm_freq[OCC_INTERNAL_MODE_DPS].min_speed = l_temp;
l_temp = (l_ppm_freq[OCC_INTERNAL_MODE_DPS_MP].fmin * 1000)/l_ppm_freq[OCC_INTERNAL_MODE_DPS_MP].fmax;
l_ppm_freq[OCC_INTERNAL_MODE_DPS_MP].min_speed = l_temp;
// Copy the PPM frequency information into g_amec
memcpy(g_amec->part_mode_freq, l_ppm_freq, sizeof(l_ppm_freq));
}
return l_err;
}
