static int
aic7770_attach(device_t dev)
{
struct aic7770_identity *entry;
struct ahc_softc *ahc;
char *name;
int error;
entry = aic7770_find_device(eisa_get_id(dev));
if (entry == NULL)
return (ENXIO);
/*
* Allocate a softc for this card and
* set it up for attachment by our
* common detect routine.
*/
name = malloc(strlen(device_get_nameunit(dev)) + 1, M_DEVBUF, M_NOWAIT);
if (name == NULL)
return (ENOMEM);
strcpy(name, device_get_nameunit(dev));
ahc = ahc_alloc(dev, name);
if (ahc == NULL)
return (ENOMEM);
ahc_set_unit(ahc, device_get_unit(dev));
/* Allocate a dmatag for our SCB DMA maps */
/* XXX Should be a child of the PCI bus dma tag */
error = aic_dma_tag_create(ahc, /*parent*/bus_get_dma_tag(dev),
/*alignment*/1, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
/*maxsize*/BUS_SPACE_MAXSIZE_32BIT,
/*nsegments*/AHC_NSEG,
/*maxsegsz*/AHC_MAXTRANSFER_SIZE,
/*flags*/0,
&ahc->parent_dmat);
if (error != 0) {
printf("ahc_eisa_attach: Could not allocate DMA tag "
"- error %d\n", error);
ahc_free(ahc);
return (ENOMEM);
}
ahc->dev_softc = dev;
error = aic7770_config(ahc, entry, /*unused ioport arg*/0);
if (error != 0) {
ahc_free(ahc);
return (error);
}
ahc_attach(ahc);
return (0);
}
void
ahc_cardbus_attach(device_t parent, device_t self, void *aux)
{
struct cardbus_attach_args *ca = aux;
struct ahc_cardbus_softc *csc = device_private(self);
struct ahc_softc *ahc = &csc->sc_ahc;
cardbus_devfunc_t ct = ca->ca_ct;
bus_space_tag_t bst;
bus_space_handle_t bsh;
pcireg_t reg;
u_int sxfrctl1 = 0;
u_char sblkctl;
ahc->sc_dev = self;
csc->sc_ct = ct;
csc->sc_tag = ca->ca_tag;
printf(": Adaptec ADP-1480 SCSI\n");
/*
* Map the device.
*/
csc->sc_csr = PCI_COMMAND_MASTER_ENABLE;
if (Cardbus_mapreg_map(csc->sc_ct, AHC_CARDBUS_MMBA,
PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
&bst, &bsh, NULL, &csc->sc_size) == 0) {
csc->sc_bar = AHC_CARDBUS_MMBA;
csc->sc_csr |= PCI_COMMAND_MEM_ENABLE;
} else if (Cardbus_mapreg_map(csc->sc_ct, AHC_CARDBUS_IOBA,
PCI_MAPREG_TYPE_IO, 0, &bst, &bsh, NULL, &csc->sc_size) == 0) {
csc->sc_bar = AHC_CARDBUS_IOBA;
csc->sc_csr |= PCI_COMMAND_IO_ENABLE;
} else {
csc->sc_bar = 0;
aprint_error("%s: unable to map device registers\n",
ahc_name(ahc));
return;
}
/* Enable the appropriate bits in the PCI CSR. */
reg = Cardbus_conf_read(ct, ca->ca_tag, PCI_COMMAND_STATUS_REG);
reg &= ~(PCI_COMMAND_IO_ENABLE|PCI_COMMAND_MEM_ENABLE);
reg |= csc->sc_csr;
Cardbus_conf_write(ct, ca->ca_tag, PCI_COMMAND_STATUS_REG, reg);
/*
* Make sure the latency timer is set to some reasonable
* value.
*/
reg = Cardbus_conf_read(ct, ca->ca_tag, PCI_BHLC_REG);
if (PCI_LATTIMER(reg) < 0x20) {
reg &= ~(PCI_LATTIMER_MASK << PCI_LATTIMER_SHIFT);
reg |= (0x20 << PCI_LATTIMER_SHIFT);
Cardbus_conf_write(ct, ca->ca_tag, PCI_BHLC_REG, reg);
}
ahc_set_name(ahc, device_xname(ahc->sc_dev));
ahc->parent_dmat = ca->ca_dmat;
ahc->tag = bst;
ahc->bsh = bsh;
/*
* ADP-1480 is always an AIC-7860.
*/
ahc->chip = AHC_AIC7860 | AHC_PCI;
ahc->features = AHC_AIC7860_FE|AHC_REMOVABLE;
ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG;
if (PCI_REVISION(ca->ca_class) >= 1)
ahc->bugs |= AHC_PCI_2_1_RETRY_BUG;
if (ahc_softc_init(ahc) != 0)
return;
/*
* On all CardBus adapters, we allow SCB paging.
*/
ahc->flags = AHC_PAGESCBS;
ahc->channel = 'A';
ahc_intr_enable(ahc, FALSE);
ahc_reset(ahc);
/*
* Establish the interrupt.
*/
ahc->ih = Cardbus_intr_establish(ct, IPL_BIO, ahc_intr, ahc);
if (ahc->ih == NULL) {
aprint_error("%s: unable to establish interrupt\n",
ahc_name(ahc));
return;
}
ahc->seep_config = malloc(sizeof(*ahc->seep_config),
M_DEVBUF, M_NOWAIT);
if (ahc->seep_config == NULL)
return;
ahc_check_extport(ahc, &sxfrctl1);
/*
* Take the LED out of diagnostic mode.
*/
sblkctl = ahc_inb(ahc, SBLKCTL);
ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON)));
/*
* I don't know where this is set in the SEEPROM or by the
* BIOS, so we default to 100%.
*/
ahc_outb(ahc, DSPCISTATUS, DFTHRSH_100);
if (ahc->flags & AHC_USEDEFAULTS) {
int our_id;
/*
* Assume only one connector and always turn
* on termination.
*/
our_id = AHC_CARDBUS_DEFAULT_SCSI_ID;
sxfrctl1 = STPWEN;
ahc_outb(ahc, SCSICONF, our_id | ENSPCHK | RESET_SCSI);
ahc->our_id = our_id;
}
printf("%s: aic7860", ahc_name(ahc));
/*
* Record our termination setting for the
* generic initialization routine.
*/
if ((sxfrctl1 & STPWEN) != 0)
ahc->flags |= AHC_TERM_ENB_A;
if (ahc_init(ahc)) {
ahc_free(ahc);
return;
}
ahc_attach(ahc);
}
static int
ahc_pci_attach(device_t dev)
{
struct ahc_pci_identity *entry;
struct ahc_softc *ahc;
char *name;
int error;
entry = ahc_find_pci_device(dev);
if (entry == NULL)
return (ENXIO);
/*
* Allocate a softc for this card and
* set it up for attachment by our
* common detect routine.
*/
name = kmalloc(strlen(device_get_nameunit(dev)) + 1, M_DEVBUF, M_INTWAIT);
strcpy(name, device_get_nameunit(dev));
ahc = ahc_alloc(dev, name);
if (ahc == NULL)
return (ENOMEM);
ahc_set_unit(ahc, device_get_unit(dev));
/*
* Should we bother disabling 39Bit addressing
* based on installed memory?
*/
if (sizeof(bus_addr_t) > 4)
ahc->flags |= AHC_39BIT_ADDRESSING;
/* Allocate a dmatag for our SCB DMA maps */
/* XXX Should be a child of the PCI bus dma tag */
error = aic_dma_tag_create(ahc, /*parent*/NULL, /*alignment*/1,
/*boundary*/0,
(ahc->flags & AHC_39BIT_ADDRESSING)
? 0x7FFFFFFFFFULL
: BUS_SPACE_MAXADDR_32BIT,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
/*maxsize*/BUS_SPACE_MAXSIZE_32BIT,
/*nsegments*/AHC_NSEG,
/*maxsegsz*/AHC_MAXTRANSFER_SIZE,
/*flags*/0,
&ahc->parent_dmat);
if (error != 0) {
kprintf("ahc_pci_attach: Could not allocate DMA tag "
"- error %d\n", error);
ahc_free(ahc);
return (ENOMEM);
}
ahc->dev_softc = dev;
error = ahc_pci_config(ahc, entry);
if (error != 0) {
ahc_free(ahc);
return (error);
}
ahc_attach(ahc);
return (0);
}
void
ahc_isa_attach(struct device *parent, struct device *self, void *aux)
{
struct ahc_softc *ahc = (void *)self;
struct isa_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
int irq;
char idstring[EISA_IDSTRINGLEN];
const char *model;
u_int intdef;
ahc_set_name(ahc, ahc->sc_dev.dv_xname);
ahc_set_unit(ahc, ahc->sc_dev.dv_unit);
/* set dma tags */
ahc->parent_dmat = ia->ia_dmat;
ahc->chip = AHC_VL; /* We are a VL Bus Controller */
if (bus_space_map(iot, ia->ia_iobase, ia->ia_iosize, 0, &ioh))
panic("ahc_isa_attach: can't map slot i/o addresses");
if (!ahc_isa_idstring(iot, ioh, idstring))
panic("ahc_isa_attach: could not read ID string");
if ((irq = ahc_isa_irq(iot, ioh)) < 0)
panic("ahc_isa_attach: ahc_isa_irq failed!");
if (strcmp(idstring, "ADP7756") == 0) {
model = EISA_PRODUCT_ADP7756;
} else if (strcmp(idstring, "ADP7757") == 0) {
model = EISA_PRODUCT_ADP7757;
} else {
panic("ahc_isa_attach: Unknown device type %s", idstring);
}
printf(": %s\n", model);
ahc->channel = 'A';
ahc->chip = AHC_AIC7770;
ahc->features = AHC_AIC7770_FE;
ahc->bugs |= AHC_TMODE_WIDEODD_BUG;
ahc->flags |= AHC_PAGESCBS;
/* set tag and handle */
ahc->tag = iot;
ahc->bsh = ioh;
#ifdef DEBUG
/*
* Tell the user what type of interrupts we're using.
* useful for debugging irq problems
*/
printf( "%s: Using %s Interrupts\n", ahc_name(ahc),
ahc->pause & IRQMS ? "Level Sensitive" : "Edge Triggered");
#endif
if (ahc_reset(ahc, /*reinit*/FALSE) != 0)
return;
/* See if we are edge triggered */
intdef = ahc_inb(ahc, INTDEF);
if ((intdef & EDGE_TRIG) != 0)
ahc->flags |= AHC_EDGE_INTERRUPT;
/*
* Now that we know we own the resources we need, do the
* card initialization.
*/
aha2840_load_seeprom(ahc);
/*
* See if we have a Rev E or higher aic7770. Anything below a
* Rev E will have a R/O autoflush disable configuration bit.
* It's still not clear exactly what is differenent about the Rev E.
* We think it allows 8 bit entries in the QOUTFIFO to support
* "paging" SCBs so you can have more than 4 commands active at
* once.
*/
{
char *id_string;
u_char sblkctl;
u_char sblkctl_orig;
sblkctl_orig = ahc_inb(ahc, SBLKCTL);
sblkctl = sblkctl_orig ^ AUTOFLUSHDIS;
ahc_outb(ahc, SBLKCTL, sblkctl);
sblkctl = ahc_inb(ahc, SBLKCTL);
if(sblkctl != sblkctl_orig)
{
id_string = "aic7770 >= Rev E, ";
/*
* Ensure autoflush is enabled
*/
sblkctl &= ~AUTOFLUSHDIS;
ahc_outb(ahc, SBLKCTL, sblkctl);
/* Allow paging on this adapter */
ahc->flags |= AHC_PAGESCBS;
}
else
id_string = "aic7770 <= Rev C, ";
printf("%s: %s", ahc_name(ahc), id_string);
}
/* Setup the FIFO threshold and the bus off time */
{
u_char hostconf = ahc_inb(ahc, HOSTCONF);
ahc_outb(ahc, BUSSPD, hostconf & DFTHRSH);
ahc_outb(ahc, BUSTIME, (hostconf << 2) & BOFF);
}
/*
* Generic aic7xxx initialization.
*/
if(ahc_init(ahc)){
ahc_free(ahc);
return;
}
/*
* Link this softc in with all other ahc instances.
*/
ahc_softc_insert(ahc);
/*
* Enable the board's BUS drivers
*/
ahc_outb(ahc, BCTL, ENABLE);
/*
* The IRQMS bit enables level sensitive interrupts only allow
* IRQ sharing if its set.
*/
ahc->ih = isa_intr_establish(ia->ia_ic, irq,
ahc->pause & IRQMS ? IST_LEVEL : IST_EDGE, IPL_BIO, ahc_platform_intr,
ahc, ahc->sc_dev.dv_xname);
if (ahc->ih == NULL) {
printf("%s: couldn't establish interrupt\n",
ahc->sc_dev.dv_xname);
ahc_free(ahc);
return;
}
ahc_intr_enable(ahc, TRUE);
/* Attach sub-devices - always succeeds */
ahc_attach(ahc);
}
static int
ahc_isa_attach(device_t dev)
{
struct aic7770_identity *entry;
bus_space_tag_t tag;
bus_space_handle_t bsh;
struct resource *regs;
struct ahc_softc *ahc;
char *name;
int zero;
int error;
zero = 0;
regs = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &zero, RF_ACTIVE);
if (regs == NULL)
return (ENOMEM);
tag = rman_get_bustag(regs);
bsh = rman_get_bushandle(regs);
entry = ahc_isa_find_device(tag, bsh);
bus_release_resource(dev, SYS_RES_IOPORT, zero, regs);
if (entry == NULL)
return (ENODEV);
/*
* Allocate a softc for this card and
* set it up for attachment by our
* common detect routine.
*/
name = malloc(strlen(device_get_nameunit(dev)) + 1, M_DEVBUF, M_NOWAIT);
if (name == NULL)
return (ENOMEM);
strcpy(name, device_get_nameunit(dev));
ahc = ahc_alloc(dev, name);
if (ahc == NULL)
return (ENOMEM);
ahc_set_unit(ahc, device_get_unit(dev));
/* Allocate a dmatag for our SCB DMA maps */
error = aic_dma_tag_create(ahc, /*parent*/bus_get_dma_tag(dev),
/*alignment*/1, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
/*maxsize*/BUS_SPACE_MAXSIZE_32BIT,
/*nsegments*/AHC_NSEG,
/*maxsegsz*/AHC_MAXTRANSFER_SIZE,
/*flags*/0,
&ahc->parent_dmat);
if (error != 0) {
printf("ahc_isa_attach: Could not allocate DMA tag "
"- error %d\n", error);
ahc_free(ahc);
return (ENOMEM);
}
ahc->dev_softc = dev;
error = aic7770_config(ahc, entry, /*unused ioport arg*/0);
if (error != 0) {
ahc_free(ahc);
return (error);
}
ahc_attach(ahc);
return (0);
}
