static void
ar9285AniSetup(struct ath_hal *ah)
{
/* NB: disable ANI for reliable RIFS rx */
ar5212AniAttach(ah, AH_NULL, AH_NULL, AH_FALSE);
}
static void
ar5312AniSetup(struct ath_hal *ah)
{
static const struct ar5212AniParams aniparams = {
.maxNoiseImmunityLevel = 4, /* levels 0..4 */
.totalSizeDesired = { -41, -41, -48, -48, -48 },
.coarseHigh = { -18, -18, -16, -14, -12 },
.coarseLow = { -56, -56, -60, -60, -60 },
.firpwr = { -72, -72, -75, -78, -80 },
.maxSpurImmunityLevel = 2,
.cycPwrThr1 = { 2, 4, 6 },
.maxFirstepLevel = 2, /* levels 0..2 */
.firstep = { 0, 4, 8 },
.ofdmTrigHigh = 500,
.ofdmTrigLow = 200,
.cckTrigHigh = 200,
.cckTrigLow = 100,
.rssiThrHigh = 40,
.rssiThrLow = 7,
.period = 100,
};
ar5212AniAttach(ah, &aniparams, &aniparams, AH_TRUE);
}
/*
* Attach for an AR5312 part.
*/
static struct ath_hal *
ar5312Attach(uint16_t devid, HAL_SOFTC sc,
HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata,
HAL_OPS_CONFIG *ah_config, HAL_STATUS *status)
{
struct ath_hal_5212 *ahp = AH_NULL;
struct ath_hal *ah;
struct ath_hal_rf *rf;
uint32_t val;
uint16_t eeval;
HAL_STATUS ecode;
HALDEBUG(AH_NULL, HAL_DEBUG_ATTACH, "%s: sc %p st %p sh %p\n",
__func__, sc, st, (void*) sh);
/* NB: memory is returned zero'd */
ahp = ath_hal_malloc(sizeof (struct ath_hal_5212));
if (ahp == AH_NULL) {
HALDEBUG(AH_NULL, HAL_DEBUG_ANY,
"%s: cannot allocate memory for state block\n", __func__);
*status = HAL_ENOMEM;
return AH_NULL;
}
ar5212InitState(ahp, devid, sc, st, sh, status);
ah = &ahp->ah_priv.h;
/* override 5212 methods for our needs */
ah->ah_reset = ar5312Reset;
ah->ah_phyDisable = ar5312PhyDisable;
ah->ah_setLedState = ar5312SetLedState;
ah->ah_detectCardPresent = ar5312DetectCardPresent;
ah->ah_setPowerMode = ar5312SetPowerMode;
ah->ah_getPowerMode = ar5312GetPowerMode;
ah->ah_isInterruptPending = ar5312IsInterruptPending;
ahp->ah_priv.ah_eepromRead = ar5312EepromRead;
#ifdef AH_SUPPORT_WRITE_EEPROM
ahp->ah_priv.ah_eepromWrite = ar5312EepromWrite;
#endif
#if ( AH_SUPPORT_2316 || AH_SUPPORT_2317)
if (IS_5315(ah)) {
ahp->ah_priv.ah_gpioCfgOutput = ar5315GpioCfgOutput;
ahp->ah_priv.ah_gpioCfgInput = ar5315GpioCfgInput;
ahp->ah_priv.ah_gpioGet = ar5315GpioGet;
ahp->ah_priv.ah_gpioSet = ar5315GpioSet;
ahp->ah_priv.ah_gpioSetIntr = ar5315GpioSetIntr;
} else
#endif
{
ahp->ah_priv.ah_gpioCfgOutput = ar5312GpioCfgOutput;
ahp->ah_priv.ah_gpioCfgInput = ar5312GpioCfgInput;
ahp->ah_priv.ah_gpioGet = ar5312GpioGet;
ahp->ah_priv.ah_gpioSet = ar5312GpioSet;
ahp->ah_priv.ah_gpioSetIntr = ar5312GpioSetIntr;
}
ah->ah_gpioCfgInput = ahp->ah_priv.ah_gpioCfgInput;
ah->ah_gpioCfgOutput = ahp->ah_priv.ah_gpioCfgOutput;
ah->ah_gpioGet = ahp->ah_priv.ah_gpioGet;
ah->ah_gpioSet = ahp->ah_priv.ah_gpioSet;
ah->ah_gpioSetIntr = ahp->ah_priv.ah_gpioSetIntr;
/* setup common ini data; rf backends handle remainder */
HAL_INI_INIT(&ahp->ah_ini_modes, ar5212Modes, 6);
HAL_INI_INIT(&ahp->ah_ini_common, ar5212Common, 2);
if (!ar5312ChipReset(ah, AH_NULL)) { /* reset chip */
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
ecode = HAL_EIO;
goto bad;
}
#if ( AH_SUPPORT_2316 || AH_SUPPORT_2317)
if ((devid == AR5212_AR2315_REV6) ||
(devid == AR5212_AR2315_REV7) ||
(devid == AR5212_AR2317_REV1) ||
(devid == AR5212_AR2317_REV2) ) {
val = ((OS_REG_READ(ah, (AR5315_RSTIMER_BASE -((uint32_t) sh)) + AR5315_WREV)) >> AR5315_WREV_S)
& AR5315_WREV_ID;
AH_PRIVATE(ah)->ah_macVersion = val >> AR5315_WREV_ID_S;
AH_PRIVATE(ah)->ah_macRev = val & AR5315_WREV_REVISION;
HALDEBUG(ah, HAL_DEBUG_ATTACH,
"%s: Mac Chip Rev 0x%02x.%x\n" , __func__,
AH_PRIVATE(ah)->ah_macVersion, AH_PRIVATE(ah)->ah_macRev);
} else
#endif
{
