static void __init tl_wr941nd_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0x0;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_add_device_eth(0);
ar71xx_add_device_dsa(0, &tl_wr941nd_dsa_data);
ar71xx_add_device_spi(NULL, tl_wr941nd_spi_info,
ARRAY_SIZE(tl_wr941nd_spi_info));
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
tl_wr941nd_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, TL_WR941ND_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr941nd_gpio_buttons),
tl_wr941nd_gpio_buttons);
ar91xx_add_device_wmac();
}
static void __init mzk_w300nh_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.has_ar8216 = 1;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_spi(NULL, mzk_w300nh_spi_info,
ARRAY_SIZE(mzk_w300nh_spi_info));
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
mzk_w300nh_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(mzk_w300nh_gpio_buttons),
mzk_w300nh_gpio_buttons);
ar91xx_add_device_wmac();
}
static void __init tew_632brp_setup(void)
{
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_spi(NULL, tew_632brp_spi_info,
ARRAY_SIZE(tew_632brp_spi_info));
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
tew_632brp_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, TEW_632BRP_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(tew_632brp_gpio_buttons),
tew_632brp_gpio_buttons);
ar91xx_add_device_wmac();
}
static void __init wrt160nl_setup(void)
{
/* TODO: ethernet, LEDs, buttons */
ar71xx_add_device_spi(NULL, wrt160nl_spi_info,
ARRAY_SIZE(wrt160nl_spi_info));
ar71xx_add_device_usb();
ar91xx_add_device_wmac();
}
static void __init ap83_generic_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0xfffffffe);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = 0x1;
ar71xx_add_device_eth(0);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x0;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_eth1_pll_data.pll_1000 = 0x1f000000;
ar71xx_add_device_eth(1);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
ap83_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(ap83_gpio_buttons),
ap83_gpio_buttons);
ar71xx_add_device_usb();
ar91xx_add_device_wmac();
platform_device_register(&ap83_flash_device);
spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info));
}