static ArtSVP *
art_svp_merge_perturbed (const ArtSVP *svp1, const ArtSVP *svp2)
{
ArtVpath *vpath1, *vpath2;
ArtVpath *vpath1_p, *vpath2_p;
ArtSVP *svp1_p, *svp2_p;
ArtSVP *svp_new;
vpath1 = art_vpath_from_svp (svp1);
vpath1_p = art_vpath_perturb (vpath1);
art_free (vpath1);
svp1_p = art_svp_from_vpath (vpath1_p);
art_free (vpath1_p);
vpath2 = art_vpath_from_svp (svp2);
vpath2_p = art_vpath_perturb (vpath2);
art_free (vpath2);
svp2_p = art_svp_from_vpath (vpath2_p);
art_free (vpath2_p);
svp_new = art_svp_merge (svp1_p, svp2_p);
#ifdef VERBOSE
print_ps_svp (svp1_p);
print_ps_svp (svp2_p);
print_ps_svp (svp_new);
#endif
art_free (svp1_p);
art_free (svp2_p);
return svp_new;
}
/**
* art_svp_vpath_stroke: Stroke a vector path.
* @vpath: #ArtVPath to stroke.
* @join: Join style.
* @cap: Cap style.
* @line_width: Width of stroke.
* @miter_limit: Miter limit.
* @flatness: Flatness.
*
* Computes an svp representing the stroked outline of @vpath. The
* width of the stroked line is @line_width.
*
* Lines are joined according to the @join rule. Possible values are
* ART_PATH_STROKE_JOIN_MITER (for mitered joins),
* ART_PATH_STROKE_JOIN_ROUND (for round joins), and
* ART_PATH_STROKE_JOIN_BEVEL (for bevelled joins). The mitered join
* is converted to a bevelled join if the miter would extend to a
* distance of more than @miter_limit * @line_width from the actual
* join point.
*
* If there are open subpaths, the ends of these subpaths are capped
* according to the @cap rule. Possible values are
* ART_PATH_STROKE_CAP_BUTT (squared cap, extends exactly to end
* point), ART_PATH_STROKE_CAP_ROUND (rounded half-circle centered at
* the end point), and ART_PATH_STROKE_CAP_SQUARE (squared cap,
* extending half @line_width past the end point).
*
* The @flatness parameter controls the accuracy of the rendering. It
* is most important for determining the number of points to use to
* approximate circular arcs for round lines and joins. In general, the
* resulting vector path will be within @flatness pixels of the "ideal"
* path containing actual circular arcs. I reserve the right to use
* the @flatness parameter to convert bevelled joins to miters for very
* small turn angles, as this would reduce the number of points in the
* resulting outline path.
*
* The resulting path is "clean" with respect to self-intersections, i.e.
* the winding number is 0 or 1 at each point.
*
* Return value: Resulting stroked outline in svp format.
**/
ArtSVP *
art_svp_vpath_stroke (ArtVpath *vpath,
ArtPathStrokeJoinType join,
ArtPathStrokeCapType cap,
double line_width,
double miter_limit,
double flatness)
{
ArtVpath *vpath_stroke, *vpath2;
ArtSVP *svp, *svp2, *svp3;
vpath_stroke = art_svp_vpath_stroke_raw (vpath, join, cap,
line_width, miter_limit, flatness);
#ifdef VERBOSE
print_ps_vpath (vpath_stroke);
#endif
vpath2 = art_vpath_perturb (vpath_stroke);
#ifdef VERBOSE
print_ps_vpath (vpath2);
#endif
art_free (vpath_stroke);
svp = art_svp_from_vpath (vpath2);
#ifdef VERBOSE
print_ps_svp (svp);
#endif
art_free (vpath2);
svp2 = art_svp_uncross (svp);
#ifdef VERBOSE
print_ps_svp (svp2);
#endif
art_svp_free (svp);
svp3 = art_svp_rewind_uncrossed (svp2, ART_WIND_RULE_NONZERO);
#ifdef VERBOSE
print_ps_svp (svp3);
#endif
art_svp_free (svp2);
return svp3;
}
gfxpoly_t* gfxpoly_from_stroke(gfxline_t*line, gfxcoord_t width, gfx_capType cap_style, gfx_joinType joint_style, double miterLimit, double gridsize)
{
ArtVpath* vec = gfxline_to_ArtVpath(line, 0);
msg("<verbose> Casting gfxline of %d segments to a stroke-polygon", gfxline_len(line));
ArtVpath* vec2 = art_vpath_perturb(vec);
free(vec);
vec = vec2;
ArtSVP *svp = art_svp_vpath_stroke (vec,
(joint_style==gfx_joinMiter)?ART_PATH_STROKE_JOIN_MITER:
((joint_style==gfx_joinRound)?ART_PATH_STROKE_JOIN_ROUND:
((joint_style==gfx_joinBevel)?ART_PATH_STROKE_JOIN_BEVEL:ART_PATH_STROKE_JOIN_BEVEL)),
(cap_style==gfx_capButt)?ART_PATH_STROKE_CAP_BUTT:
((cap_style==gfx_capRound)?ART_PATH_STROKE_CAP_ROUND:
((cap_style==gfx_capSquare)?ART_PATH_STROKE_CAP_SQUARE:ART_PATH_STROKE_CAP_SQUARE)),
width, //line_width
miterLimit, //miter_limit
0.05 //flatness
);
free(vec);
return (gfxpoly_t*)svp;
}
/**
* art_svp_vpath_stroke: Stroke a vector path.
* @vpath: #ArtVPath to stroke.
* @join: Join style.
* @cap: Cap style.
* @line_width: Width of stroke.
* @miter_limit: Miter limit.
* @flatness: Flatness.
*
* Computes an svp representing the stroked outline of @vpath. The
* width of the stroked line is @line_width.
*
* Lines are joined according to the @join rule. Possible values are
* ART_PATH_STROKE_JOIN_MITER (for mitered joins),
* ART_PATH_STROKE_JOIN_ROUND (for round joins), and
* ART_PATH_STROKE_JOIN_BEVEL (for bevelled joins). The mitered join
* is converted to a bevelled join if the miter would extend to a
* distance of more than @miter_limit * @line_width from the actual
* join point.
*
* If there are open subpaths, the ends of these subpaths are capped
* according to the @cap rule. Possible values are
* ART_PATH_STROKE_CAP_BUTT (squared cap, extends exactly to end
* point), ART_PATH_STROKE_CAP_ROUND (rounded half-circle centered at
* the end point), and ART_PATH_STROKE_CAP_SQUARE (squared cap,
* extending half @line_width past the end point).
*
* The @flatness parameter controls the accuracy of the rendering. It
* is most important for determining the number of points to use to
* approximate circular arcs for round lines and joins. In general, the
* resulting vector path will be within @flatness pixels of the "ideal"
* path containing actual circular arcs. I reserve the right to use
* the @flatness parameter to convert bevelled joins to miters for very
* small turn angles, as this would reduce the number of points in the
* resulting outline path.
*
* The resulting path is "clean" with respect to self-intersections, i.e.
* the winding number is 0 or 1 at each point.
*
* Return value: Resulting stroked outline in svp format.
**/
ArtSVP *
art_svp_vpath_stroke (ArtVpath *vpath,
ArtPathStrokeJoinType join,
ArtPathStrokeCapType cap,
double line_width,
double miter_limit,
double flatness)
{
#ifdef ART_USE_NEW_INTERSECTOR
ArtVpath *vpath_stroke;
ArtSVP *svp, *svp2;
ArtSvpWriter *swr;
vpath_stroke = art_svp_vpath_stroke_raw (vpath, join, cap,
line_width, miter_limit, flatness);
#ifdef VERBOSE
print_ps_vpath (vpath_stroke);
#endif
svp = art_svp_from_vpath (vpath_stroke);
#ifdef VERBOSE
print_ps_svp (svp);
#endif
art_free (vpath_stroke);
swr = art_svp_writer_rewind_new (ART_WIND_RULE_NONZERO);
art_svp_intersector (svp, swr);
svp2 = art_svp_writer_rewind_reap (swr);
#ifdef VERBOSE
print_ps_svp (svp2);
#endif
art_svp_free (svp);
return svp2;
#else
ArtVpath *vpath_stroke, *vpath2;
ArtSVP *svp, *svp2, *svp3;
vpath_stroke = art_svp_vpath_stroke_raw (vpath, join, cap,
line_width, miter_limit, flatness);
#ifdef VERBOSE
print_ps_vpath (vpath_stroke);
#endif
vpath2 = art_vpath_perturb (vpath_stroke);
#ifdef VERBOSE
print_ps_vpath (vpath2);
#endif
art_free (vpath_stroke);
svp = art_svp_from_vpath (vpath2);
#ifdef VERBOSE
print_ps_svp (svp);
#endif
art_free (vpath2);
svp2 = art_svp_uncross (svp);
#ifdef VERBOSE
print_ps_svp (svp2);
#endif
art_svp_free (svp);
svp3 = art_svp_rewind_uncrossed (svp2, ART_WIND_RULE_NONZERO);
#ifdef VERBOSE
print_ps_svp (svp3);
#endif
art_svp_free (svp2);
return svp3;
#endif
}