C++ (Cpp) at86rf231_gpio_spi_interrupts_init примеры использования

Пример #1

Файл: at86rf231.c Проект: spium/IoT-RIOT

void at86rf231_init(int tpid)
{
    transceiver_pid = tpid;

    at86rf231_gpio_spi_interrupts_init();

    at86rf231_reset();

    // TODO : Enable addr decode, auto ack, auto crc
    // and configure security, power, channel, pan

    radio_pan = 0;
    radio_pan = 0x00FF & (uint16_t)at86rf231_reg_read(AT86RF231_REG__PAN_ID_0);
    radio_pan |= (uint16_t)at86rf231_reg_read(AT86RF231_REG__PAN_ID_1) << 8;

    radio_channel = at86rf231_reg_read(AT86RF231_REG__PHY_CC_CCA) & AT86RF231_PHY_CC_CCA_MASK__CHANNEL;

    radio_address = 0x00FF & (uint16_t)at86rf231_reg_read(AT86RF231_REG__SHORT_ADDR_0);
    radio_address |= at86rf231_reg_read(AT86RF231_REG__SHORT_ADDR_1) << 8;

    radio_address_long = 0x00000000000000FF & (uint64_t)at86rf231_reg_read(AT86RF231_REG__IEEE_ADDR_0);
    radio_address_long |= ((uint64_t)at86rf231_reg_read(AT86RF231_REG__IEEE_ADDR_1)) << 8;
    radio_address_long |= ((uint64_t)at86rf231_reg_read(AT86RF231_REG__IEEE_ADDR_1)) << 16;
    radio_address_long |= ((uint64_t)at86rf231_reg_read(AT86RF231_REG__IEEE_ADDR_1)) << 24;
    radio_address_long |= ((uint64_t)at86rf231_reg_read(AT86RF231_REG__IEEE_ADDR_1)) << 32;
    radio_address_long |= ((uint64_t)at86rf231_reg_read(AT86RF231_REG__IEEE_ADDR_1)) << 40;
    radio_address_long |= ((uint64_t)at86rf231_reg_read(AT86RF231_REG__IEEE_ADDR_1)) << 48;
    radio_address_long |= ((uint64_t)at86rf231_reg_read(AT86RF231_REG__IEEE_ADDR_1)) << 56;

    at86rf231_switch_to_rx();
}

Пример #2

Файл: at86rf231.c Проект: Dinesh-Ramakrishnan/RIOT

void at86rf231_init(int tpid)
{
    transceiver_pid = tpid;

    at86rf231_gpio_spi_interrupts_init();

    at86rf231_reset();

    // TODO : Enable addr decode, auto ack, auto crc
    // and configure security, power, channel, pan

    at86rf231_switch_to_rx();
}