Пример #1
0
static void avr_timer_reconfigure(avr_timer_t * p)
{
	avr_t * avr = p->io.avr;

	avr_timer_wgm_t zero={0};
	p->mode = zero;
	// cancel everything
	p->comp[AVR_TIMER_COMPA].comp_cycles = 0;
	p->comp[AVR_TIMER_COMPB].comp_cycles = 0;
	p->comp[AVR_TIMER_COMPC].comp_cycles = 0;
	p->tov_cycles = 0;
	
	avr_cycle_timer_cancel(avr, avr_timer_tov, p);
	avr_cycle_timer_cancel(avr, avr_timer_compa, p);
	avr_cycle_timer_cancel(avr, avr_timer_compb, p);
	avr_cycle_timer_cancel(avr, avr_timer_compc, p);

	long clock = avr->frequency;

	// only can exists on "asynchronous" 8 bits timers
	if (avr_regbit_get(avr, p->as2))
		clock = 32768;

	uint8_t cs = avr_regbit_get_array(avr, p->cs, ARRAY_SIZE(p->cs));
	if (cs == 0) {
		AVR_LOG(avr, LOG_TRACE, "TIMER: %s-%c clock turned off\n", __FUNCTION__, p->name);
		return;
	}

	uint8_t mode = avr_regbit_get_array(avr, p->wgm, ARRAY_SIZE(p->wgm));
	uint8_t cs_div = p->cs_div[cs];
	uint32_t f = clock >> cs_div;

	p->mode = p->wgm_op[mode];
	//printf("%s-%c clock %d, div %d(/%d) = %d ; mode %d\n", __FUNCTION__, p->name, clock, cs, 1 << cs_div, f, mode);
	switch (p->mode.kind) {
		case avr_timer_wgm_normal:
			avr_timer_configure(p, f, (1 << p->mode.size) - 1);
			break;
		case avr_timer_wgm_fc_pwm:
			avr_timer_configure(p, f, (1 << p->mode.size) - 1);
			break;
		case avr_timer_wgm_ctc: {
			avr_timer_configure(p, f, _timer_get_ocr(p, AVR_TIMER_COMPA));
		}	break;
		case avr_timer_wgm_pwm: {
			uint16_t top = p->mode.top == avr_timer_wgm_reg_ocra ? _timer_get_ocr(p, AVR_TIMER_COMPA) : _timer_get_icr(p);
			avr_timer_configure(p, f, top);
		}	break;
		case avr_timer_wgm_fast_pwm:
			avr_timer_configure(p, f, (1 << p->mode.size) - 1);
			break;
		default:
			AVR_LOG(avr, LOG_WARNING, "TIMER: %s-%c unsupported timer mode wgm=%d (%d)\n",
					__FUNCTION__, p->name, mode, p->mode.kind);
	}	
}
Пример #2
0
static void
avr_adc_write_adcsra(
		struct avr_t * avr, avr_io_addr_t addr, uint8_t v, void * param)
{
	avr_adc_configure_trigger(avr, addr, v, param);
	
	avr_adc_t * p = (avr_adc_t *)param;
	uint8_t adsc = avr_regbit_get(avr, p->adsc);
	uint8_t aden = avr_regbit_get(avr, p->aden);

	avr->data[p->adsc.reg] = v;

	// can't write zero to adsc
	if (adsc && !avr_regbit_get(avr, p->adsc)) {
		avr_regbit_set(avr, p->adsc);
		v = avr->data[p->adsc.reg];
	}
	if (!aden && avr_regbit_get(avr, p->aden)) {
		// first conversion
		p->first = 1;
		AVR_LOG(avr, LOG_TRACE, "ADC: Start AREF %d AVCC %d\n", avr->aref, avr->avcc);
	}
	if (aden && !avr_regbit_get(avr, p->aden)) {
		// stop ADC
		avr_cycle_timer_cancel(avr, avr_adc_int_raise, p);
		avr_regbit_clear(avr, p->adsc);
		v = avr->data[p->adsc.reg];	// Peter Ross [email protected]
	}
	if (!adsc && avr_regbit_get(avr, p->adsc)) {
		// start one!
		uint8_t muxi = avr_regbit_get_array(avr, p->mux, ARRAY_SIZE(p->mux));
		union {
			avr_adc_mux_t mux;
			uint32_t v;
		} e = { .mux = p->muxmode[muxi] };
		avr_raise_irq(p->io.irq + ADC_IRQ_OUT_TRIGGER, e.v);

		// clock prescaler are just a bit shift.. and 0 means 1
		uint32_t div = avr_regbit_get_array(avr, p->adps, ARRAY_SIZE(p->adps));
		if (!div) div++;

		div = avr->frequency >> div;
		if (p->first)
			AVR_LOG(avr, LOG_TRACE, "ADC: starting at %uKHz\n", div / 13 / 100);
		div /= p->first ? 25 : 13;	// first cycle is longer

		avr_cycle_timer_register(avr,
				avr_hz_to_cycles(avr, div),
				avr_adc_int_raise, p);
	}
	avr_core_watch_write(avr, addr, v);
}
Пример #3
0
static void
avr_timer_write(
		struct avr_t * avr,
		avr_io_addr_t addr,
		uint8_t v,
		void * param)
{
	avr_timer_t * p = (avr_timer_t *)param;

	uint8_t as2 = avr_regbit_get(avr, p->as2);
	uint8_t cs = avr_regbit_get_array(avr, p->cs, ARRAY_SIZE(p->cs));
	uint8_t mode = avr_regbit_get_array(avr, p->wgm, ARRAY_SIZE(p->wgm));

	avr_core_watch_write(avr, addr, v);

	uint8_t new_as2 = avr_regbit_get(avr, p->as2);
	uint8_t new_cs = avr_regbit_get_array(avr, p->cs, ARRAY_SIZE(p->cs));
	uint8_t new_mode = avr_regbit_get_array(avr, p->wgm, ARRAY_SIZE(p->wgm));

	// only reconfigure the timer if "relevant" bits have changed
	// this prevent the timer reset when changing the edge detector
	// or other minor bits
	if (new_cs != cs || new_mode != mode || new_as2 != as2) {
	/* cs */
		if (new_cs == 0) {
			// cancel everything
			avr_timer_cancel_all_cycle_timers(avr, p, 1);

			AVR_LOG(avr, LOG_TRACE, "TIMER: %s-%c clock turned off\n",
					__func__, p->name);
			return;
		}

		if (new_as2) {
			// AVR clock and external 32KHz source does not have
			// to be synced. To obtain better simulation results
			// p->tov_base type must be float or avr->frequency
			// must be multiple of 32768.
			p->cs_div_value = (uint32_t)((uint64_t)avr->frequency * (1 << p->cs_div[new_cs]) / 32768);
		} else {
			p->cs_div_value = 1 << p->cs_div[new_cs];
		}

	/* mode */
		p->mode = p->wgm_op[new_mode];
		p->wgm_op_mode_kind = p->mode.kind;
		p->wgm_op_mode_size = (1 << p->mode.size) - 1;

		avr_timer_reconfigure(p, 1);
	}
}
Пример #4
0
static void avr_extint_irq_notify(struct avr_irq_t * irq, uint32_t value, void * param)
{
	avr_extint_t * p = (avr_extint_t *)param;
	avr_t * avr = p->io.avr;

	int up = !irq->value && value;
	int down = irq->value && !value;

	uint8_t isc_bits = p->eint[irq->irq + 1].isc->reg ? 2 : 1;
	uint8_t mode = avr_regbit_get_array(avr, p->eint[irq->irq].isc, isc_bits);

	// Asynchronous interrupts, eg int2 in m16, m32 etc. support only down/up
	if (isc_bits == 1)
		mode +=2;

	switch (mode) {
		case 0:
			// unsupported
			break;
		case 1:
			if (up || down)
				avr_raise_interrupt(avr, &p->eint[irq->irq].vector);
			break;
		case 2:
			if (down)
				avr_raise_interrupt(avr, &p->eint[irq->irq].vector);
			break;
		case 3:
			if (up)
				avr_raise_interrupt(avr, &p->eint[irq->irq].vector);
			break;
	}
}
Пример #5
0
static void avr_extint_irq_notify(struct avr_irq_t * irq, uint32_t value, void * param)
{
	avr_extint_t * p = (avr_extint_t *)param;
	avr_t * avr = p->io.avr;

	uint8_t mode = avr_regbit_get_array(avr, p->eint[irq->irq].isc, 2);
	int up = !irq->value && value;
	int down = irq->value && !value;
	switch (mode) {
		case 0:
			// unsupported
			break;
		case 1:
			if (up || down)
				avr_raise_interrupt(avr, &p->eint[irq->irq].vector);
			break;
		case 2:
			if (down)
				avr_raise_interrupt(avr, &p->eint[irq->irq].vector);
			break;
		case 3:
			if (up)
				avr_raise_interrupt(avr, &p->eint[irq->irq].vector);
			break;
	}
}
Пример #6
0
static void
avr_watchdog_set_cycle_count_and_timer (avr_t * avr, avr_watchdog_t * p, uint8_t was_enabled, int8_t old_wdp)
{
  // If nothing else, always ensure we have a valid cycle count...
  uint8_t wdp = avr_regbit_get_array (avr, p->wdp, 4);

  p->cycle_count = 2048 << wdp;
  p->cycle_count = (p->cycle_count * avr->frequency) / 128000;

  uint8_t wde = avr_regbit_get (avr, p->wde);
  uint8_t wdie = avr_regbit_get (avr, p->watchdog.enable);

  uint8_t enable_changed = (was_enabled != (wde || wdie));

  uint8_t wdp_changed = ((old_wdp >= 0) ? (wdp != old_wdp) : 0);

  if (!enable_changed && !wdp_changed)
    return;

  static char *message[2][2] = { {0, "reset"}, {"enabled", "enabled and set"} };

  if (wde || wdie)
    {
      AVR_LOG (avr, LOG_TRACE, "WATCHDOG: %s to %d cycles @ 128kz (* %d) = %d CPU cycles.\n",
               message[enable_changed][wdp_changed], 2048 << wdp, 1 << wdp, (int) p->cycle_count);

      avr_cycle_timer_register (avr, p->cycle_count, avr_watchdog_timer, p);
    }
  else if (enable_changed)
    {
      AVR_LOG (avr, LOG_TRACE, "WATCHDOG: disabled\n");
      avr_cycle_timer_cancel (avr, avr_watchdog_timer, p);
    }
}
Пример #7
0
static void avr_timer_write(struct avr_t * avr, avr_io_addr_t addr, uint8_t v, void * param)
{
	avr_timer_t * p = (avr_timer_t *)param;

	uint8_t as2 = avr_regbit_get(avr, p->as2);
	uint8_t cs = avr_regbit_get_array(avr, p->cs, ARRAY_SIZE(p->cs));
	uint8_t mode = avr_regbit_get_array(avr, p->wgm, ARRAY_SIZE(p->wgm));

	avr_core_watch_write(avr, addr, v);

	// only reconfigure the timer if "relevant" bits have changed
	// this prevent the timer reset when changing the edge detector
	// or other minor bits
	if (avr_regbit_get_array(avr, p->cs, ARRAY_SIZE(p->cs)) != cs ||
			avr_regbit_get_array(avr, p->wgm, ARRAY_SIZE(p->wgm)) != mode ||
					avr_regbit_get(avr, p->as2) != as2) {
		avr_timer_reconfigure(p);
	}
}
Пример #8
0
static void
avr_adc_configure_trigger(
		struct avr_t * avr, avr_io_addr_t addr, uint8_t v, void * param)
{
	avr_adc_t * p = (avr_adc_t *)param;
	
	uint8_t adate = avr_regbit_get(avr, p->adate);
	uint8_t old_adts = p->adts_mode;
	
	static char * auto_trigger_names[] = {
		"none",
		"free_running",
		"analog_comparator_0",
		"analog_comparator_1",
		"analog_comparator_2",
		"analog_comparator_3",
		"external_interrupt_0",
		"timer_0_compare_match_a",
		"timer_0_compare_match_b",
		"timer_0_overflow",
		"timer_1_compare_match_b",
		"timer_1_overflow",
		"timer_1_capture_event",
		"pin_change_interrupt",
		"psc_module_0_sync_signal",
		"psc_module_1_sync_signal",
		"psc_module_2_sync_signal",
	};
	
	if( adate ) {
		uint8_t adts = avr_regbit_get_array(avr, p->adts, ARRAY_SIZE(p->adts));
		p->adts_mode = p->adts_op[adts];
		
		switch(p->adts_mode) {
			case avr_adts_free_running: {
				// do nothing at free running mode
			}	break;
			// TODO: implement the other auto trigger modes
			default: {
				AVR_LOG(avr, LOG_WARNING,
						"ADC: unimplemented auto trigger mode: %s\n",
						auto_trigger_names[p->adts_mode]);
				p->adts_mode = avr_adts_none;
			}	break;
		}
	} else {
		// TODO: remove previously configured auto triggers
		p->adts_mode = avr_adts_none;
	}
	
	if( old_adts != p->adts_mode )
		AVR_LOG(avr, LOG_TRACE, "ADC: auto trigger configured: %s\n",
				auto_trigger_names[p->adts_mode]);
}
Пример #9
0
static void
avr_watchdog_write (avr_t * avr, avr_io_addr_t addr, uint8_t v, void *param)
{
  avr_watchdog_t *p = (avr_watchdog_t *) param;

  uint8_t old_wde = avr_regbit_get (avr, p->wde);
  uint8_t old_wdie = avr_regbit_get (avr, p->watchdog.enable);
  uint8_t old_wdce = avr_regbit_get (avr, p->wdce);

  uint8_t was_enabled = (old_wde || old_wdie);

  uint8_t old_v = avr->data[addr];   // allow gdb to see write...
  avr_core_watch_write (avr, addr, v);

  if (old_wdce)
    {
      uint8_t old_wdp = avr_regbit_get_array (avr, p->wdp, 4);

      // wdrf (watchdog reset flag) must be cleared before wde can be cleared.
      if (avr_regbit_get (avr, p->wdrf))
        avr_regbit_set (avr, p->wde);

      avr_watchdog_set_cycle_count_and_timer (avr, p, was_enabled, old_wdp);
    }
  else
    {
      /* easier to change only what we need rather than check and reset 
       * locked/read-only bits.
       */
      avr->data[addr] = old_v;

      uint8_t wdce_v = avr_regbit_from_value (avr, p->wdce, v);
      uint8_t wde_v = avr_regbit_from_value (avr, p->wde, v);

      if (wdce_v && wde_v)
        {
          avr_regbit_set (avr, p->wdce);

          avr_cycle_timer_register (avr, 4, avr_wdce_clear, p);
        }
      else
        {
          if (wde_v)   // wde can be set but not cleared
            avr_regbit_set (avr, p->wde);

          avr_regbit_setto_raw (avr, p->watchdog.enable, v);

          avr_watchdog_set_cycle_count_and_timer (avr, p, was_enabled, -1);
        }
    }
}
Пример #10
0
static void avr_watchdog_write(avr_t * avr, avr_io_addr_t addr, uint8_t v, void * param)
{
	avr_watchdog_t * p = (avr_watchdog_t *)param;
	// backup the registers
	// uint8_t wd = avr->data[p->wdce.reg];
	uint8_t wdce_o = avr_regbit_get(avr, p->wdce);	// old
	uint8_t wde_o = avr_regbit_get(avr, p->wde);
	uint8_t wdp_o[4];

//	printf("avr_watchdog_write %02x\n", v);
	for (int i = 0; i < 4; i++)
		wdp_o[i] = avr_regbit_get(avr, p->wdp[i]);

	avr->data[p->wdce.reg] = v;
	uint8_t wdce_n = avr_regbit_get(avr, p->wdce);	// new

	if (wdce_o /* || wdce_n */) {
		// make sure bit gets reset eventually
		if (wdce_n)
			avr_cycle_timer_register(avr, 4, avr_wdce_clear, p);

		uint8_t wdp = avr_regbit_get_array(avr, p->wdp, 4);
		p->cycle_count = 2048 << wdp;
		p->cycle_count = (p->cycle_count * avr->frequency) / 128000;
		if (avr_regbit_get(avr, p->wde)) {
			printf("Watchdog reset to %d cycles @ 128kz (* %d) = %d CPU cycles)\n", 2048 << wdp, 1 << wdp, (int)p->cycle_count);
			avr_cycle_timer_register(avr, p->cycle_count, avr_watchdog_timer, p);
		} else {
			printf("Watchdog disabled\n");
			avr_cycle_timer_cancel(avr, avr_watchdog_timer, p);
		}
	} else {
		// reset old values
		avr_regbit_setto(avr, p->wde, wde_o);
		for (int i = 0; i < 4; i++)
			avr_regbit_setto(avr, p->wdp[i], wdp_o[i]);
		v = avr->data[p->wdce.reg];
	}
	avr_core_watch_write(avr, addr, v);
}
Пример #11
0
static void
avr_timer_reconfigure(
		avr_timer_t * p, uint8_t reset)
{
	avr_t * avr = p->io.avr;

	// cancel everything
	avr_timer_cancel_all_cycle_timers(avr, p, 1);

	switch (p->wgm_op_mode_kind) {
		case avr_timer_wgm_normal:
			avr_timer_configure(p, p->cs_div_value, p->wgm_op_mode_size, reset);
			break;
		case avr_timer_wgm_fc_pwm:
			avr_timer_configure(p, p->cs_div_value, p->wgm_op_mode_size, reset);
			break;
		case avr_timer_wgm_ctc: {
			avr_timer_configure(p, p->cs_div_value, _timer_get_ocr(p, AVR_TIMER_COMPA), reset);
		}	break;
		case avr_timer_wgm_pwm: {
			uint16_t top = (p->mode.top == avr_timer_wgm_reg_ocra) ?
				_timer_get_ocr(p, AVR_TIMER_COMPA) : _timer_get_icr(p);
			avr_timer_configure(p, p->cs_div_value, top, reset);
		}	break;
		case avr_timer_wgm_fast_pwm:
			avr_timer_configure(p, p->cs_div_value, p->wgm_op_mode_size, reset);
			break;
		case avr_timer_wgm_none:
			avr_timer_configure(p, p->cs_div_value, p->wgm_op_mode_size, reset);
			break;
		default: {
			uint8_t mode = avr_regbit_get_array(avr, p->wgm, ARRAY_SIZE(p->wgm));
			AVR_LOG(avr, LOG_WARNING, "TIMER: %s-%c unsupported timer mode wgm=%d (%d)\n",
					__FUNCTION__, p->name, mode, p->mode.kind);
		}
	}	
}
Пример #12
0
static uint8_t
avr_adc_read_l(
		struct avr_t * avr, avr_io_addr_t addr, void * param)
{
	avr_adc_t * p = (avr_adc_t *)param;

	if (p->read_status)	// conversion already done
		return avr_core_watch_read(avr, addr);

	uint8_t refi = avr_regbit_get_array(avr, p->ref, ARRAY_SIZE(p->ref));
	uint16_t ref = p->ref_values[refi];
	uint8_t muxi = avr_regbit_get_array(avr, p->mux, ARRAY_SIZE(p->mux));
	avr_adc_mux_t mux = p->muxmode[muxi];
	// optional shift left/right
	uint8_t shift = avr_regbit_get(avr, p->adlar) ? 6 : 0; // shift LEFT

	uint32_t reg = 0;
	switch (mux.kind) {
		case ADC_MUX_SINGLE:
			reg = p->adc_values[mux.src];
			break;
		case ADC_MUX_DIFF:
			if (mux.gain == 0)
				mux.gain = 1;
			reg = ((uint32_t)p->adc_values[mux.src] * mux.gain) -
					((uint32_t)p->adc_values[mux.diff] * mux.gain);
			break;
		case ADC_MUX_TEMP:
			reg = p->temp; // assumed to be already calibrated somehow
			break;
		case ADC_MUX_REF:
			reg = mux.src; // reference voltage
			break;
		case ADC_MUX_VCC4:
			if ( !avr->vcc) {
				AVR_LOG(avr, LOG_WARNING, "ADC: missing VCC analog voltage\n");
			} else
				reg = avr->vcc / 4;
			break;
	}
	uint32_t vref = 3300;
	switch (ref) {
		case ADC_VREF_VCC:
			if (!avr->vcc)
				AVR_LOG(avr, LOG_WARNING, "ADC: missing VCC analog voltage\n");
			else
				vref = avr->vcc;
			break;
		case ADC_VREF_AREF:
			if (!avr->aref)
				AVR_LOG(avr, LOG_WARNING, "ADC: missing AREF analog voltage\n");
			else
				vref = avr->aref;
			break;
		case ADC_VREF_AVCC:
			if (!avr->avcc)
				AVR_LOG(avr, LOG_WARNING, "ADC: missing AVCC analog voltage\n");
			else
				vref = avr->avcc;
			break;
		default:
			vref = ref;
	}
//	printf("ADCL %d:%3d:%3d read %4d vref %d:%d=%d\n",
//			mux.kind, mux.diff, mux.src,
//			reg, refi, ref, vref);
	reg = (reg * 0x3ff) / vref;	// scale to 10 bits ADC
//	printf("ADC to 10 bits 0x%x %d\n", reg, reg);
	if (reg > 0x3ff) {
		AVR_LOG(avr, LOG_WARNING, "ADC: channel %d clipped %u/%u VREF %d\n", mux.kind, reg, 0x3ff, vref);
		reg = 0x3ff;
	}
	reg <<= shift;
//	printf("ADC to 10 bits %x shifted %d\n", reg, shift);
	avr->data[p->r_adcl] = reg;
	avr->data[p->r_adch] = reg >> 8;
	p->read_status = 1;
	return avr_core_watch_read(avr, addr);
}