int wl_glue_register(void)
{
int err;
switch(active_bus_type)
{
#ifdef CONFIG_SSB
case WL_GLUE_BUS_TYPE_SSB:
err = ssb_driver_register(&wl_glue_ssb_driver);
break;
#endif /* CONFIG_SSB */
#ifdef CONFIG_BCMA
case WL_GLUE_BUS_TYPE_BCMA:
err = bcma_driver_register(&wl_glue_bcma_driver);
break;
#endif /* CONFIG_BCMA */
default:
pr_err("Not attaching through glue driver due to unsupported bus\n");
err = -ENOSYS;
break;
}
if (!err)
{
pr_info("SSB/BCMA glue driver successfully attached\n");
wl_glue_attached = 1;
}
return err;
}
/**
* This is the main entry point for the brcmsmac driver.
*
* This function is scheduled upon module initialization and
* does the driver registration, which result in brcms_bcma_probe()
* call resulting in the driver bringup.
*/
static void brcms_driver_init(struct work_struct *work)
{
int error;
error = bcma_driver_register(&brcms_bcma_driver);
if (error)
pr_err("%s: register returned %d\n", __func__, error);
}
static int __init bcm53xxspi_module_init(void)
{
int err = 0;
err = bcma_driver_register(&bcm53xxspi_bcma_driver);
if (err)
pr_err("Failed to register bcma driver: %d\n", err);
return err;
}
static int __init bgmac_init(void)
{
int err;
err = bcma_driver_register(&bgmac_bcma_driver);
if (err)
return err;
pr_info("Broadcom 47xx GBit MAC driver loaded\n");
return 0;
}
/**
* This is the main entry point for the brcmsmac driver.
*
* This function determines if a device pointed to by pdev is a WL device,
* and if so, performs a brcms_attach() on it.
*
*/
static int __init brcms_module_init(void)
{
int error = -ENODEV;
#ifdef BCMDBG
if (msglevel != 0xdeadbeef)
brcm_msg_level = msglevel;
#endif /* BCMDBG */
error = bcma_driver_register(&brcms_bcma_driver);
printk(KERN_ERR "%s: register returned %d\n", __func__, error);
if (!error)
return 0;
return error;
}
static int bgmac_fixed_phy_register(struct bgmac *bgmac)
{
struct fixed_phy_status fphy_status = {
.link = 1,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
struct phy_device *phy_dev;
int err;
phy_dev = fixed_phy_register(PHY_POLL, &fphy_status, -1, NULL);
if (!phy_dev || IS_ERR(phy_dev)) {
bgmac_err(bgmac, "Failed to register fixed PHY device\n");
return -ENODEV;
}
err = phy_connect_direct(bgmac->net_dev, phy_dev, bgmac_adjust_link,
PHY_INTERFACE_MODE_MII);
if (err) {
bgmac_err(bgmac, "Connecting PHY failed\n");
return err;
}
bgmac->phy_dev = phy_dev;
return err;
}
static int bgmac_mii_register(struct bgmac *bgmac)
{
struct mii_bus *mii_bus;
struct phy_device *phy_dev;
char bus_id[MII_BUS_ID_SIZE + 3];
int err = 0;
if (bgmac_is_bcm4707_family(bgmac))
return bgmac_fixed_phy_register(bgmac);
mii_bus = mdiobus_alloc();
if (!mii_bus)
return -ENOMEM;
mii_bus->name = "bgmac mii bus";
sprintf(mii_bus->id, "%s-%d-%d", "bgmac", bgmac->core->bus->num,
bgmac->core->core_unit);
mii_bus->priv = bgmac;
mii_bus->read = bgmac_mii_read;
mii_bus->write = bgmac_mii_write;
mii_bus->parent = &bgmac->core->dev;
mii_bus->phy_mask = ~(1 << bgmac->phyaddr);
err = mdiobus_register(mii_bus);
if (err) {
bgmac_err(bgmac, "Registration of mii bus failed\n");
goto err_free_bus;
}
bgmac->mii_bus = mii_bus;
/* Connect to the PHY */
snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id,
bgmac->phyaddr);
phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(phy_dev)) {
bgmac_err(bgmac, "PHY connection failed\n");
err = PTR_ERR(phy_dev);
goto err_unregister_bus;
}
bgmac->phy_dev = phy_dev;
return err;
err_unregister_bus:
mdiobus_unregister(mii_bus);
err_free_bus:
mdiobus_free(mii_bus);
return err;
}
static void bgmac_mii_unregister(struct bgmac *bgmac)
{
struct mii_bus *mii_bus = bgmac->mii_bus;
mdiobus_unregister(mii_bus);
mdiobus_free(mii_bus);
}
/**************************************************
* BCMA bus ops
**************************************************/
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
static int bgmac_probe(struct bcma_device *core)
{
struct net_device *net_dev;
struct bgmac *bgmac;
struct ssb_sprom *sprom = &core->bus->sprom;
u8 *mac;
int err;
switch (core->core_unit) {
case 0:
mac = sprom->et0mac;
break;
case 1:
mac = sprom->et1mac;
break;
case 2:
mac = sprom->et2mac;
break;
default:
pr_err("Unsupported core_unit %d\n", core->core_unit);
return -ENOTSUPP;
}
if (!is_valid_ether_addr(mac)) {
dev_err(&core->dev, "Invalid MAC addr: %pM\n", mac);
eth_random_addr(mac);
dev_warn(&core->dev, "Using random MAC: %pM\n", mac);
}
/* This (reset &) enable is not preset in specs or reference driver but
* Broadcom does it in arch PCI code when enabling fake PCI device.
*/
bcma_core_enable(core, 0);
/* Allocation and references */
net_dev = alloc_etherdev(sizeof(*bgmac));
if (!net_dev)
return -ENOMEM;
net_dev->netdev_ops = &bgmac_netdev_ops;
net_dev->irq = core->irq;
net_dev->ethtool_ops = &bgmac_ethtool_ops;
bgmac = netdev_priv(net_dev);
bgmac->net_dev = net_dev;
bgmac->core = core;
bcma_set_drvdata(core, bgmac);
/* Defaults */
memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN);
/* On BCM4706 we need common core to access PHY */
if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
!core->bus->drv_gmac_cmn.core) {
bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n");
err = -ENODEV;
goto err_netdev_free;
}
bgmac->cmn = core->bus->drv_gmac_cmn.core;
switch (core->core_unit) {
case 0:
bgmac->phyaddr = sprom->et0phyaddr;
break;
case 1:
bgmac->phyaddr = sprom->et1phyaddr;
break;
case 2:
bgmac->phyaddr = sprom->et2phyaddr;
break;
}
bgmac->phyaddr &= BGMAC_PHY_MASK;
if (bgmac->phyaddr == BGMAC_PHY_MASK) {
bgmac_err(bgmac, "No PHY found\n");
err = -ENODEV;
goto err_netdev_free;
}
bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr,
bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : "");
if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) {
bgmac_err(bgmac, "PCI setup not implemented\n");
err = -ENOTSUPP;
goto err_netdev_free;
}
bgmac_chip_reset(bgmac);
/* For Northstar, we have to take all GMAC core out of reset */
if (bgmac_is_bcm4707_family(bgmac)) {
struct bcma_device *ns_core;
int ns_gmac;
/* Northstar has 4 GMAC cores */
for (ns_gmac = 0; ns_gmac < 4; ns_gmac++) {
/* As Northstar requirement, we have to reset all GMACs
* before accessing one. bgmac_chip_reset() call
* bcma_core_enable() for this core. Then the other
* three GMACs didn't reset. We do it here.
*/
ns_core = bcma_find_core_unit(core->bus,
BCMA_CORE_MAC_GBIT,
ns_gmac);
if (ns_core && !bcma_core_is_enabled(ns_core))
bcma_core_enable(ns_core, 0);
}
}
err = bgmac_dma_alloc(bgmac);
if (err) {
bgmac_err(bgmac, "Unable to alloc memory for DMA\n");
goto err_netdev_free;
}
bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0)
bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
/* TODO: reset the external phy. Specs are needed */
bgmac_phy_reset(bgmac);
bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
BGMAC_BFL_ENETROBO);
if (bgmac->has_robosw)
bgmac_warn(bgmac, "Support for Roboswitch not implemented\n");
if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n");
netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT);
err = bgmac_mii_register(bgmac);
if (err) {
bgmac_err(bgmac, "Cannot register MDIO\n");
goto err_dma_free;
}
net_dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
net_dev->hw_features = net_dev->features;
net_dev->vlan_features = net_dev->features;
err = register_netdev(bgmac->net_dev);
if (err) {
bgmac_err(bgmac, "Cannot register net device\n");
goto err_mii_unregister;
}
netif_carrier_off(net_dev);
return 0;
err_mii_unregister:
bgmac_mii_unregister(bgmac);
err_dma_free:
bgmac_dma_free(bgmac);
err_netdev_free:
bcma_set_drvdata(core, NULL);
free_netdev(net_dev);
return err;
}
static void bgmac_remove(struct bcma_device *core)
{
struct bgmac *bgmac = bcma_get_drvdata(core);
unregister_netdev(bgmac->net_dev);
bgmac_mii_unregister(bgmac);
netif_napi_del(&bgmac->napi);
bgmac_dma_free(bgmac);
bcma_set_drvdata(core, NULL);
free_netdev(bgmac->net_dev);
}
static struct bcma_driver bgmac_bcma_driver = {
.name = KBUILD_MODNAME,
.id_table = bgmac_bcma_tbl,
.probe = bgmac_probe,
.remove = bgmac_remove,
};
static int __init bgmac_init(void)
{
int err;
err = bcma_driver_register(&bgmac_bcma_driver);
if (err)
return err;
pr_info("Broadcom 47xx GBit MAC driver loaded\n");
return 0;
}
static int __init bcma_hcd_init(void)
{
return bcma_driver_register(&bcma_hcd_driver);
}
