static void coroutine_fn mirror_run(void *opaque)
{
MirrorBlockJob *s = opaque;
BlockDriverState *bs = s->common.bs;
int64_t sector_num, end, sectors_per_chunk, length;
uint64_t last_pause_ns;
BlockDriverInfo bdi;
char backing_filename[1024];
int ret = 0;
int n;
if (block_job_is_cancelled(&s->common)) {
goto immediate_exit;
}
s->common.len = bdrv_getlength(bs);
if (s->common.len <= 0) {
block_job_completed(&s->common, s->common.len);
return;
}
length = (bdrv_getlength(bs) + s->granularity - 1) / s->granularity;
s->in_flight_bitmap = bitmap_new(length);
/* If we have no backing file yet in the destination, we cannot let
* the destination do COW. Instead, we copy sectors around the
* dirty data if needed. We need a bitmap to do that.
*/
bdrv_get_backing_filename(s->target, backing_filename,
sizeof(backing_filename));
if (backing_filename[0] && !s->target->backing_hd) {
bdrv_get_info(s->target, &bdi);
if (s->granularity < bdi.cluster_size) {
s->buf_size = MAX(s->buf_size, bdi.cluster_size);
s->cow_bitmap = bitmap_new(length);
}
}
end = s->common.len >> BDRV_SECTOR_BITS;
s->buf = qemu_blockalign(bs, s->buf_size);
sectors_per_chunk = s->granularity >> BDRV_SECTOR_BITS;
mirror_free_init(s);
if (s->mode != MIRROR_SYNC_MODE_NONE) {
/* First part, loop on the sectors and initialize the dirty bitmap. */
BlockDriverState *base;
base = s->mode == MIRROR_SYNC_MODE_FULL ? NULL : bs->backing_hd;
for (sector_num = 0; sector_num < end; ) {
int64_t next = (sector_num | (sectors_per_chunk - 1)) + 1;
ret = bdrv_is_allocated_above(bs, base,
sector_num, next - sector_num, &n);
if (ret < 0) {
goto immediate_exit;
}
assert(n > 0);
if (ret == 1) {
bdrv_set_dirty(bs, sector_num, n);
sector_num = next;
} else {
sector_num += n;
}
}
}
bdrv_dirty_iter_init(bs, &s->hbi);
last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
for (;;) {
uint64_t delay_ns;
int64_t cnt;
bool should_complete;
if (s->ret < 0) {
ret = s->ret;
goto immediate_exit;
}
cnt = bdrv_get_dirty_count(bs);
/* Note that even when no rate limit is applied we need to yield
* periodically with no pending I/O so that qemu_aio_flush() returns.
* We do so every SLICE_TIME nanoseconds, or when there is an error,
* or when the source is clean, whichever comes first.
*/
if (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - last_pause_ns < SLICE_TIME &&
s->common.iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
if (s->in_flight == MAX_IN_FLIGHT || s->buf_free_count == 0 ||
(cnt == 0 && s->in_flight > 0)) {
trace_mirror_yield(s, s->in_flight, s->buf_free_count, cnt);
qemu_coroutine_yield();
continue;
} else if (cnt != 0) {
mirror_iteration(s);
continue;
}
}
should_complete = false;
if (s->in_flight == 0 && cnt == 0) {
trace_mirror_before_flush(s);
ret = bdrv_flush(s->target);
if (ret < 0) {
if (mirror_error_action(s, false, -ret) == BDRV_ACTION_REPORT) {
goto immediate_exit;
}
} else {
/* We're out of the streaming phase. From now on, if the job
* is cancelled we will actually complete all pending I/O and
* report completion. This way, block-job-cancel will leave
* the target in a consistent state.
*/
s->common.offset = end * BDRV_SECTOR_SIZE;
if (!s->synced) {
block_job_ready(&s->common);
s->synced = true;
}
should_complete = s->should_complete ||
block_job_is_cancelled(&s->common);
cnt = bdrv_get_dirty_count(bs);
}
}
if (cnt == 0 && should_complete) {
/* The dirty bitmap is not updated while operations are pending.
* If we're about to exit, wait for pending operations before
* calling bdrv_get_dirty_count(bs), or we may exit while the
* source has dirty data to copy!
*
* Note that I/O can be submitted by the guest while
* mirror_populate runs.
*/
trace_mirror_before_drain(s, cnt);
bdrv_drain_all();
cnt = bdrv_get_dirty_count(bs);
}
ret = 0;
trace_mirror_before_sleep(s, cnt, s->synced);
if (!s->synced) {
/* Publish progress */
s->common.offset = (end - cnt) * BDRV_SECTOR_SIZE;
if (s->common.speed) {
delay_ns = ratelimit_calculate_delay(&s->limit, sectors_per_chunk);
} else {
delay_ns = 0;
}
block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
if (block_job_is_cancelled(&s->common)) {
break;
}
} else if (!should_complete) {
delay_ns = (s->in_flight == 0 && cnt == 0 ? SLICE_TIME : 0);
block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
} else if (cnt == 0) {
/* The two disks are in sync. Exit and report successful
* completion.
*/
assert(QLIST_EMPTY(&bs->tracked_requests));
s->common.cancelled = false;
break;
}
last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
}
immediate_exit:
if (s->in_flight > 0) {
/* We get here only if something went wrong. Either the job failed,
* or it was cancelled prematurely so that we do not guarantee that
* the target is a copy of the source.
*/
assert(ret < 0 || (!s->synced && block_job_is_cancelled(&s->common)));
mirror_drain(s);
}
assert(s->in_flight == 0);
qemu_vfree(s->buf);
g_free(s->cow_bitmap);
g_free(s->in_flight_bitmap);
bdrv_set_dirty_tracking(bs, 0);
bdrv_iostatus_disable(s->target);
if (s->should_complete && ret == 0) {
if (bdrv_get_flags(s->target) != bdrv_get_flags(s->common.bs)) {
bdrv_reopen(s->target, bdrv_get_flags(s->common.bs), NULL);
}
bdrv_swap(s->target, s->common.bs);
}
bdrv_close(s->target);
bdrv_unref(s->target);
block_job_completed(&s->common, ret);
}
static void coroutine_fn mirror_run(void *opaque)
{
MirrorBlockJob *s = opaque;
MirrorExitData *data;
BlockDriverState *bs = s->common.bs;
int64_t sector_num, end, sectors_per_chunk, length;
uint64_t last_pause_ns;
BlockDriverInfo bdi;
char backing_filename[2]; /* we only need 2 characters because we are only
checking for a NULL string */
int ret = 0;
int n;
if (block_job_is_cancelled(&s->common)) {
goto immediate_exit;
}
s->bdev_length = bdrv_getlength(bs);
if (s->bdev_length < 0) {
ret = s->bdev_length;
goto immediate_exit;
} else if (s->bdev_length == 0) {
/* Report BLOCK_JOB_READY and wait for complete. */
block_job_event_ready(&s->common);
s->synced = true;
while (!block_job_is_cancelled(&s->common) && !s->should_complete) {
block_job_yield(&s->common);
}
s->common.cancelled = false;
goto immediate_exit;
}
length = DIV_ROUND_UP(s->bdev_length, s->granularity);
s->in_flight_bitmap = bitmap_new(length);
/* If we have no backing file yet in the destination, we cannot let
* the destination do COW. Instead, we copy sectors around the
* dirty data if needed. We need a bitmap to do that.
*/
bdrv_get_backing_filename(s->target, backing_filename,
sizeof(backing_filename));
if (backing_filename[0] && !s->target->backing_hd) {
ret = bdrv_get_info(s->target, &bdi);
if (ret < 0) {
goto immediate_exit;
}
if (s->granularity < bdi.cluster_size) {
s->buf_size = MAX(s->buf_size, bdi.cluster_size);
s->cow_bitmap = bitmap_new(length);
}
}
end = s->bdev_length / BDRV_SECTOR_SIZE;
s->buf = qemu_try_blockalign(bs, s->buf_size);
if (s->buf == NULL) {
ret = -ENOMEM;
goto immediate_exit;
}
sectors_per_chunk = s->granularity >> BDRV_SECTOR_BITS;
mirror_free_init(s);
if (!s->is_none_mode) {
/* First part, loop on the sectors and initialize the dirty bitmap. */
BlockDriverState *base = s->base;
for (sector_num = 0; sector_num < end; ) {
int64_t next = (sector_num | (sectors_per_chunk - 1)) + 1;
ret = bdrv_is_allocated_above(bs, base,
sector_num, next - sector_num, &n);
if (ret < 0) {
goto immediate_exit;
}
assert(n > 0);
if (ret == 1) {
bdrv_set_dirty_bitmap(s->dirty_bitmap, sector_num, n);
sector_num = next;
} else {
sector_num += n;
}
}
}
bdrv_dirty_iter_init(s->dirty_bitmap, &s->hbi);
last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
for (;;) {
uint64_t delay_ns = 0;
int64_t cnt;
bool should_complete;
if (s->ret < 0) {
ret = s->ret;
goto immediate_exit;
}
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
/* s->common.offset contains the number of bytes already processed so
* far, cnt is the number of dirty sectors remaining and
* s->sectors_in_flight is the number of sectors currently being
* processed; together those are the current total operation length */
s->common.len = s->common.offset +
(cnt + s->sectors_in_flight) * BDRV_SECTOR_SIZE;
/* Note that even when no rate limit is applied we need to yield
* periodically with no pending I/O so that bdrv_drain_all() returns.
* We do so every SLICE_TIME nanoseconds, or when there is an error,
* or when the source is clean, whichever comes first.
*/
if (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - last_pause_ns < SLICE_TIME &&
s->common.iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
if (s->in_flight == MAX_IN_FLIGHT || s->buf_free_count == 0 ||
(cnt == 0 && s->in_flight > 0)) {
trace_mirror_yield(s, s->in_flight, s->buf_free_count, cnt);
qemu_coroutine_yield();
continue;
} else if (cnt != 0) {
delay_ns = mirror_iteration(s);
}
}
should_complete = false;
if (s->in_flight == 0 && cnt == 0) {
trace_mirror_before_flush(s);
ret = bdrv_flush(s->target);
if (ret < 0) {
if (mirror_error_action(s, false, -ret) ==
BLOCK_ERROR_ACTION_REPORT) {
goto immediate_exit;
}
} else {
/* We're out of the streaming phase. From now on, if the job
* is cancelled we will actually complete all pending I/O and
* report completion. This way, block-job-cancel will leave
* the target in a consistent state.
*/
if (!s->synced) {
block_job_event_ready(&s->common);
s->synced = true;
}
should_complete = s->should_complete ||
block_job_is_cancelled(&s->common);
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
}
}
if (cnt == 0 && should_complete) {
/* The dirty bitmap is not updated while operations are pending.
* If we're about to exit, wait for pending operations before
* calling bdrv_get_dirty_count(bs), or we may exit while the
* source has dirty data to copy!
*
* Note that I/O can be submitted by the guest while
* mirror_populate runs.
*/
trace_mirror_before_drain(s, cnt);
bdrv_drain(bs);
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
}
ret = 0;
trace_mirror_before_sleep(s, cnt, s->synced, delay_ns);
if (!s->synced) {
block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
if (block_job_is_cancelled(&s->common)) {
break;
}
} else if (!should_complete) {
delay_ns = (s->in_flight == 0 && cnt == 0 ? SLICE_TIME : 0);
block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
} else if (cnt == 0) {
/* The two disks are in sync. Exit and report successful
* completion.
*/
assert(QLIST_EMPTY(&bs->tracked_requests));
s->common.cancelled = false;
break;
}
last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
}
immediate_exit:
if (s->in_flight > 0) {
/* We get here only if something went wrong. Either the job failed,
* or it was cancelled prematurely so that we do not guarantee that
* the target is a copy of the source.
*/
assert(ret < 0 || (!s->synced && block_job_is_cancelled(&s->common)));
mirror_drain(s);
}
assert(s->in_flight == 0);
qemu_vfree(s->buf);
g_free(s->cow_bitmap);
g_free(s->in_flight_bitmap);
bdrv_release_dirty_bitmap(bs, s->dirty_bitmap);
bdrv_iostatus_disable(s->target);
data = g_malloc(sizeof(*data));
data->ret = ret;
block_job_defer_to_main_loop(&s->common, mirror_exit, data);
}