bool CDStarRepeaterD::createThread()
{
CDStarRepeaterConfig config(m_confDir, CONFIG_FILE_NAME, m_name);
wxString callsign, gateway;
DSTAR_MODE mode;
ACK_TYPE ack;
bool restriction, rpt1Validation, dtmfBlanking, errorReply;
config.getCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation, dtmfBlanking, errorReply);
wxString modemType;
config.getModem(modemType);
// DVAP can only do simplex, force the mode accordingly
if (modemType.IsSameAs(wxT("DVAP"))) {
if (mode == MODE_DUPLEX) {
wxLogInfo(wxT("DVAP: changing mode from DUPLEX to SIMPLEX"));
mode = MODE_SIMPLEX;
} else if (mode == MODE_TXANDRX) {
wxLogInfo(wxT("DVAP: changing mode from TX_AND_RX to RX_ONLY"));
mode = MODE_RXONLY;
}
}
switch (mode) {
case MODE_RXONLY:
m_thread = new CDStarRepeaterRXThread(modemType);
break;
case MODE_TXONLY:
m_thread = new CDStarRepeaterTXThread(modemType);
break;
case MODE_TXANDRX:
m_thread = new CDStarRepeaterTXRXThread(modemType);
break;
default:
m_thread = new CDStarRepeaterTRXThread(modemType);
break;
}
m_thread->setCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation, dtmfBlanking, errorReply);
wxLogInfo(wxT("Callsign set to \"%s\", gateway set to \"%s\", mode: %d, ack: %d, restriction: %d, RPT1 validation: %d, DTMF blanking: %d, Error reply: %d"), callsign.c_str(), gateway.c_str(), int(mode), int(ack), int(restriction), int(rpt1Validation), int(dtmfBlanking), int(errorReply));
wxString gatewayAddress, localAddress, name;
unsigned int gatewayPort, localPort;
config.getNetwork(gatewayAddress, gatewayPort, localAddress, localPort, name);
wxLogInfo(wxT("Gateway set to %s:%u, local set to %s:%u, name set to \"%s\""), gatewayAddress.c_str(), gatewayPort, localAddress.c_str(), localPort, name.c_str());
if (!gatewayAddress.IsEmpty()) {
bool local = gatewayAddress.IsSameAs(wxT("127.0.0.1"));
CRepeaterProtocolHandler* handler = new CRepeaterProtocolHandler(gatewayAddress, gatewayPort, localAddress, localPort, name);
bool res = handler->open();
if (!res) {
wxLogError(wxT("Cannot open the protocol handler"));
return false;
}
m_thread->setProtocolHandler(handler, local);
}
unsigned int timeout, ackTime;
config.getTimes(timeout, ackTime);
m_thread->setTimes(timeout, ackTime);
wxLogInfo(wxT("Timeout set to %u secs, ack time set to %u ms"), timeout, ackTime);
unsigned int beaconTime;
wxString beaconText;
bool beaconVoice;
TEXT_LANG language;
config.getBeacon(beaconTime, beaconText, beaconVoice, language);
if (mode == MODE_GATEWAY)
beaconTime = 0U;
m_thread->setBeacon(beaconTime, beaconText, beaconVoice, language);
wxLogInfo(wxT("Beacon set to %u mins, text set to \"%s\", voice set to %d, language set to %d"), beaconTime / 60U, beaconText.c_str(), int(beaconVoice), int(language));
bool announcementEnabled;
unsigned int announcementTime;
wxString announcementRecordRPT1, announcementRecordRPT2;
wxString announcementDeleteRPT1, announcementDeleteRPT2;
config.getAnnouncement(announcementEnabled, announcementTime, announcementRecordRPT1, announcementRecordRPT2, announcementDeleteRPT1, announcementDeleteRPT2);
if (mode == MODE_GATEWAY)
announcementEnabled = false;
m_thread->setAnnouncement(announcementEnabled, announcementTime, announcementRecordRPT1, announcementRecordRPT2, announcementDeleteRPT1, announcementDeleteRPT2);
wxLogInfo(wxT("Announcement enabled: %d, time: %u mins, record RPT1: \"%s\", record RPT2: \"%s\", delete RPT1: \"%s\", delete RPT2: \"%s\""), int(announcementEnabled), announcementTime / 60U, announcementRecordRPT1.c_str(), announcementRecordRPT2.c_str(), announcementDeleteRPT1.c_str(), announcementDeleteRPT2.c_str());
wxLogInfo(wxT("Modem type set to \"%s\""), modemType.c_str());
CModem* modem = NULL;
if (modemType.IsSameAs(wxT("DVAP"))) {
wxString port;
unsigned int frequency;
int power, squelch;
config.getDVAP(port, frequency, power, squelch);
wxLogInfo(wxT("DVAP: port: %s, frequency: %u Hz, power: %d dBm, squelch: %d dBm"), port.c_str(), frequency, power, squelch);
modem = new CDVAPController(port, frequency, power, squelch);
} else if (modemType.IsSameAs(wxT("DV-RPTR V1"))) {
wxString port;
bool rxInvert, txInvert, channel;
unsigned int modLevel, txDelay;
config.getDVRPTR1(port, rxInvert, txInvert, channel, modLevel, txDelay);
wxLogInfo(wxT("DV-RPTR V1, port: %s, RX invert: %d, TX invert: %d, channel: %s, mod level: %u%%, TX delay: %u ms"), port.c_str(), int(rxInvert), int(txInvert), channel ? wxT("B") : wxT("A"), modLevel, txDelay);
modem = new CDVRPTRV1Controller(port, wxEmptyString, rxInvert, txInvert, channel, modLevel, txDelay);
} else if (modemType.IsSameAs(wxT("DV-RPTR V2"))) {
CONNECTION_TYPE connType;
wxString usbPort, address;
bool txInvert;
unsigned int port, modLevel, txDelay;
config.getDVRPTR2(connType, usbPort, address, port, txInvert, modLevel, txDelay);
wxLogInfo(wxT("DV-RPTR V2, type: %d, address: %s:%u, TX invert: %d, mod level: %u%%, TX delay: %u ms"), int(connType), address.c_str(), port, int(txInvert), modLevel, txDelay);
switch (connType) {
case CT_USB:
modem = new CDVRPTRV2Controller(usbPort, wxEmptyString, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
case CT_NETWORK:
modem = new CDVRPTRV2Controller(address, port, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
}
} else if (modemType.IsSameAs(wxT("DV-RPTR V3"))) {
CONNECTION_TYPE connType;
wxString usbPort, address;
bool txInvert;
unsigned int port, modLevel, txDelay;
config.getDVRPTR3(connType, usbPort, address, port, txInvert, modLevel, txDelay);
wxLogInfo(wxT("DV-RPTR V3, type: %d, address: %s:%u, TX invert: %d, mod level: %u%%, TX delay: %u ms"), int(connType), address.c_str(), port, int(txInvert), modLevel, txDelay);
switch (connType) {
case CT_USB:
modem = new CDVRPTRV3Controller(usbPort, wxEmptyString, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
case CT_NETWORK:
modem = new CDVRPTRV3Controller(address, port, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
}
} else if (modemType.IsSameAs(wxT("DVMEGA"))) {
wxString port;
DVMEGA_VARIANT variant;
bool rxInvert, txInvert;
unsigned int txDelay, rxFrequency, txFrequency, power;
config.getDVMEGA(port, variant, rxInvert, txInvert, txDelay, rxFrequency, txFrequency, power);
wxLogInfo(wxT("DVMEGA, port: %s, variant: %d, RX invert: %d, TX invert: %d, TX delay: %u ms, rx frequency: %u Hz, tx frequency: %u Hz, power: %u %%"), port.c_str(), int(variant), int(rxInvert), int(txInvert), txDelay, rxFrequency, txFrequency, power);
switch (variant) {
case DVMV_MODEM:
modem = new CDVMegaController(port, wxEmptyString, rxInvert, txInvert, txDelay);
break;
case DVMV_RADIO_2M:
case DVMV_RADIO_70CM:
case DVMV_RADIO_2M_70CM:
modem = new CDVMegaController(port, wxEmptyString, txDelay, rxFrequency, txFrequency, power);
break;
default:
wxLogError(wxT("Unknown DVMEGA variant - %d"), int(variant));
break;
}
} else if (modemType.IsSameAs(wxT("GMSK Modem"))) {
USB_INTERFACE iface;
unsigned int address;
config.getGMSK(iface, address);
wxLogInfo(wxT("GMSK, interface: %d, address: %04X"), int(iface), address);
modem = new CGMSKController(iface, address, mode == MODE_DUPLEX || mode == MODE_TXANDRX);
} else if (modemType.IsSameAs(wxT("Sound Card"))) {
wxString rxDevice, txDevice;
bool rxInvert, txInvert;
wxFloat32 rxLevel, txLevel;
unsigned int txDelay, txTail;
config.getSoundCard(rxDevice, txDevice, rxInvert, txInvert, rxLevel, txLevel, txDelay, txTail);
wxLogInfo(wxT("Sound Card, devices: %s:%s, invert: %d:%d, levels: %.2f:%.2f, tx delay: %u ms, tx tail: %u ms"), rxDevice.c_str(), txDevice.c_str(), int(rxInvert), int(txInvert), rxLevel, txLevel, txDelay, txTail);
modem = new CSoundCardController(rxDevice, txDevice, rxInvert, txInvert, rxLevel, txLevel, txDelay, txTail);
} else if (modemType.IsSameAs(wxT("MMDVM"))) {
wxString port;
bool rxInvert, txInvert, pttInvert;
unsigned int txDelay, rxLevel, txLevel;
config.getMMDVM(port, rxInvert, txInvert, pttInvert, txDelay, rxLevel, txLevel);
wxLogInfo(wxT("MMDVM, port: %s, RX invert: %d, TX invert: %d, PTT invert: %d, TX delay: %u ms, RX level: %u%%, TX level: %u%%"), port.c_str(), int(rxInvert), int(txInvert), int(pttInvert), txDelay, rxLevel, txLevel);
modem = new CMMDVMController(port, wxEmptyString, rxInvert, txInvert, pttInvert, txDelay, rxLevel, txLevel);
} else if (modemType.IsSameAs(wxT("Split"))) {
wxString localAddress;
unsigned int localPort;
wxArrayString transmitterNames, receiverNames;
unsigned int timeout;
config.getSplit(localAddress, localPort, transmitterNames, receiverNames, timeout);
wxLogInfo(wxT("Split, local: %s:%u, timeout: %u ms"), localAddress.c_str(), localPort, timeout);
for (unsigned int i = 0U; i < transmitterNames.GetCount(); i++) {
wxString name = transmitterNames.Item(i);
if (!name.IsEmpty())
wxLogInfo(wxT("\tTX %u name: %s"), i + 1U, name.c_str());
}
for (unsigned int i = 0U; i < receiverNames.GetCount(); i++) {
wxString name = receiverNames.Item(i);
if (!name.IsEmpty())
wxLogInfo(wxT("\tRX %u name: %s"), i + 1U, name.c_str());
}
modem = new CSplitController(localAddress, localPort, transmitterNames, receiverNames, timeout);
} else {
wxLogError(wxT("Unknown modem type: %s"), modemType.c_str());
}
if (modem != NULL) {
bool res = modem->start();
if (!res)
wxLogError(wxT("Cannot open the D-Star modem"));
else
m_thread->setModem(modem);
}
wxString controllerType;
unsigned int portConfig, activeHangTime;
bool pttInvert;
config.getController(controllerType, portConfig, pttInvert, activeHangTime);
wxLogInfo(wxT("Controller set to %s, config: %u, PTT invert: %d, active hang time: %u ms"), controllerType.c_str(), portConfig, int(pttInvert), activeHangTime);
CExternalController* controller = NULL;
wxString port;
if (controllerType.StartsWith(wxT("Velleman K8055 - "), &port)) {
unsigned long num;
port.ToULong(&num);
controller = new CExternalController(new CK8055Controller(num), pttInvert);
} else if (controllerType.StartsWith(wxT("Serial - "), &port)) {
controller = new CExternalController(new CSerialLineController(port, portConfig), pttInvert);
} else if (controllerType.StartsWith(wxT("Arduino - "), &port)) {
controller = new CExternalController(new CArduinoController(port), pttInvert);
#if defined(GPIO)
} else if (controllerType.IsSameAs(wxT("GPIO"))) {
controller = new CExternalController(new CGPIOController(portConfig), pttInvert);
#endif
} else {
controller = new CExternalController(new CDummyController, pttInvert);
}
bool res = controller->open();
if (!res)
wxLogError(wxT("Cannot open the hardware interface - %s"), controllerType.c_str());
else
m_thread->setController(controller, activeHangTime);
bool out1, out2, out3, out4;
config.getOutputs(out1, out2, out3, out4);
m_thread->setOutputs(out1, out2, out3, out4);
wxLogInfo(wxT("Output 1 = %d, output 2 = %d, output 3 = %d, output 4 = %d"), out1, out2, out3, out4);
bool enabled;
wxString rpt1Callsign, rpt2Callsign;
wxString shutdown, startup;
wxString status1, status2, status3, status4, status5;
wxString command1, command1Line, command2, command2Line;
wxString command3, command3Line, command4, command4Line;
wxString command5, command5Line, command6, command6Line;
wxString output1, output2, output3, output4;
config.getControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, command5, command5Line, command6, command6Line, output1, output2, output3, output4);
m_thread->setControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, command5, command5Line, command6, command6Line, output1, output2, output3, output4);
wxLogInfo(wxT("Control: enabled: %d, RPT1: %s, RPT2: %s, shutdown: %s, startup: %s, status1: %s, status2: %s, status3: %s, status4: %s, status5: %s, command1: %s = %s, command2: %s = %s, command3: %s = %s, command4: %s = %s, command5: %s = %s, command6: %s = %s, output1: %s, output2: %s, output3: %s, output4: %s"), enabled, rpt1Callsign.c_str(), rpt2Callsign.c_str(), shutdown.c_str(), startup.c_str(), status1.c_str(), status2.c_str(), status3.c_str(), status4.c_str(), status5.c_str(), command1.c_str(), command1Line.c_str(), command2.c_str(), command2Line.c_str(), command3.c_str(), command3Line.c_str(), command4.c_str(), command4Line.c_str(), command5.c_str(), command5Line.c_str(), command6.c_str(), command6Line.c_str(), output1.c_str(), output2.c_str(), output3.c_str(), output4.c_str());
bool logging;
config.getLogging(logging);
m_thread->setLogging(logging, m_audioDir);
wxLogInfo(wxT("Frame logging set to %d, in %s"), int(logging), m_audioDir.c_str());
wxFileName wlFilename(wxFileName::GetHomeDir(), WHITELIST_FILE_NAME);
bool exists = wlFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(wlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open white list file - %s"), wlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the white list"), list->getCount());
m_thread->setWhiteList(list);
}
}
wxFileName blFilename(wxFileName::GetHomeDir(), BLACKLIST_FILE_NAME);
exists = blFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(blFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open black list file - %s"), blFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the black list"), list->getCount());
m_thread->setBlackList(list);
}
}
wxFileName glFilename(wxFileName::GetHomeDir(), GREYLIST_FILE_NAME);
exists = glFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(glFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open grey list file - %s"), glFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the grey list"), list->getCount());
m_thread->setGreyList(list);
}
}
return true;
}
void CGMSKRepeaterApp::createThread()
{
wxString callsign, gateway;
DSTAR_MODE mode;
ACK_TYPE ack;
bool restriction, rpt1Validation;
getCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
IGMSKRepeaterThread* thread = NULL;
switch (mode) {
case MODE_RXONLY:
thread = new CGMSKRepeaterRXThread;
break;
case MODE_TXONLY:
thread = new CGMSKRepeaterTXThread;
break;
case MODE_TXANDRX:
thread = new CGMSKRepeaterTXRXThread;
break;
default:
thread = new CGMSKRepeaterTRXThread;
break;
}
thread->setCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
wxLogInfo(wxT("Callsign set to \"%s\", gateway set to \"%s\", mode: %d, ack: %d, restriction: %d, RPT1 validation: %d"), callsign.c_str(), gateway.c_str(), int(mode), int(ack), restriction, rpt1Validation);
wxString gatewayAddress, localAddress;
unsigned int gatewayPort, localPort;
getNetwork(gatewayAddress, gatewayPort, localAddress, localPort);
wxLogInfo(wxT("Gateway set to %s:%u, local set to %s:%u"), gatewayAddress.c_str(), gatewayPort, localAddress.c_str(), localPort);
if (!gatewayAddress.IsEmpty()) {
CRepeaterProtocolHandler* handler = new CRepeaterProtocolHandler(gatewayAddress, gatewayPort, localAddress, localPort);
bool res = handler->open();
if (!res)
wxLogError(wxT("Cannot open the protocol handler"));
else
thread->setProtocolHandler(handler);
}
unsigned int timeout, ackTime;
getTimes(timeout, ackTime);
thread->setTimes(timeout, ackTime);
wxLogInfo(wxT("Timeout set to %u secs, ack time set to %u ms"), timeout, ackTime);
unsigned int beaconTime;
wxString beaconText;
bool beaconVoice;
TEXT_LANG language;
getBeacon(beaconTime, beaconText, beaconVoice, language);
if (mode == MODE_GATEWAY)
beaconTime = 0U;
thread->setBeacon(beaconTime, beaconText, beaconVoice, language);
wxLogInfo(wxT("Beacon set to %u mins, text set to \"%s\", voice set to %d, language set to %d"), beaconTime / 60U, beaconText.c_str(), int(beaconVoice), int(language));
GMSK_MODEM_TYPE modemType;
unsigned int modemAddress;
getModem(modemType, modemAddress);
#if defined(WIN32)
IGMSKModem* modem = NULL;
switch (modemType) {
case GMT_LIBUSB:
wxLogInfo(wxT("GMSK modem: type: LibUsb, address: 0x%04X"), modemAddress);
modem = new CGMSKModemLibUsb(modemAddress);
break;
case GMT_WINUSB:
wxLogInfo(wxT("GMSK modem: type: WinUSB, address: 0x%04X"), modemAddress);
modem = new CGMSKModemWinUSB(modemAddress);
break;
default:
wxLogError(wxT("Unknown GMSK Modem type - %d"), int(modemType));
break;
}
#else
wxLogInfo(wxT("GMSK modem: type: LibUsb, address: 0x%04X"), modemAddress);
IGMSKModem* modem = new CGMSKModemLibUsb(modemAddress);
#endif
if (modem != NULL) {
bool res = modem->open();
if (!res)
wxLogError(wxT("Cannot open the GMSK modem"));
else
thread->setModem(modem);
}
wxString controllerType;
unsigned int activeHangTime;
getController(controllerType, activeHangTime);
wxLogInfo(wxT("Controller set to %s, active hang time: %u ms"), controllerType.c_str(), activeHangTime);
CExternalController* controller = NULL;
wxString port;
if (controllerType.StartsWith(wxT("Velleman K8055 - "), &port)) {
unsigned long num;
port.ToULong(&num);
controller = new CExternalController(new CK8055Controller(num), false, false);
} else if (controllerType.IsSameAs(wxT("Raspberry Pi"))) {
controller = new CExternalController(new CRaspberryController, false, false);
} else {
controller = new CExternalController(new CDummyController, false, false);
}
bool res = controller->open();
if (!res)
wxLogError(wxT("Cannot open the hardware interface - %s"), controllerType.c_str());
else
thread->setController(controller, activeHangTime);
bool out1, out2, out3, out4;
getOutputs(out1, out2, out3, out4);
thread->setOutputs(out1, out2, out3, out4);
m_frame->setOutputs(out1, out2, out3, out4);
wxLogInfo(wxT("Output 1 = %d, output 2 = %d, output 3 = %d, output 4 = %d"), out1, out2, out3, out4);
bool enabled;
wxString rpt1Callsign, rpt2Callsign;
wxString shutdown, startup;
wxString status1, status2, status3, status4, status5;
wxString command1, command1Line, command2, command2Line;
wxString command3, command3Line, command4, command4Line;
wxString output1, output2, output3, output4;
getControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, output1, output2, output3, output4);
thread->setControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, output1, output2, output3, output4);
wxLogInfo(wxT("Control: enabled: %d, RPT1: %s, RPT2: %s, shutdown: %s, startup: %s, status1: %s, status2: %s, status3: %s, status4: %s, status5: %s, command1: %s = %s, command2: %s = %s, command3: %s = %s, command4: %s = %s, output1: %s, output2: %s, output3: %s, output4: %s"), enabled, rpt1Callsign.c_str(), rpt2Callsign.c_str(), shutdown.c_str(), startup.c_str(), status1.c_str(), status2.c_str(), status3.c_str(), status4.c_str(), status5.c_str(), command1.c_str(), command1Line.c_str(), command2.c_str(), command2Line.c_str(), command3.c_str(), command3Line.c_str(), command4.c_str(), command4Line.c_str(), output1.c_str(), output2.c_str(), output3.c_str(), output4.c_str());
bool logging;
getLogging(logging);
thread->setLogging(logging, m_audioDir);
m_frame->setLogging(logging);
wxLogInfo(wxT("Frame logging set to %d, in %s"), int(logging), m_audioDir.c_str());
wxFileName wlFilename(wxFileName::GetHomeDir(), WHITELIST_FILE_NAME);
bool exists = wlFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(wlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open white list file - %s"), wlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the white list"), list->getCount());
thread->setWhiteList(list);
}
}
wxFileName blFilename(wxFileName::GetHomeDir(), BLACKLIST_FILE_NAME);
exists = blFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(blFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open black list file - %s"), blFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the black list"), list->getCount());
thread->setBlackList(list);
}
}
// Convert the worker class into a thread
m_thread = new CGMSKRepeaterThreadHelper(thread);
m_thread->start();
}
void CSplitRepeaterApp::createThread()
{
CSplitRepeaterThread* thread = new CSplitRepeaterThread;
wxString callsign, gateway;
DSTAR_MODE mode;
ACK_TYPE ack;
bool restriction, rpt1Validation;
getCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
thread->setCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
wxLogInfo(wxT("Callsign set to \"%s\", gateway set to \"%s\", mode: %d, ack: %d, restriction: %d, RPT1 validation: %d"), callsign.c_str(), gateway.c_str(), int(mode), int(ack), restriction, rpt1Validation);
wxString gatewayAddress, localAddress;
unsigned int gatewayPort, localPort;
getNetwork(gatewayAddress, gatewayPort, localAddress, localPort);
wxLogInfo(wxT("Gateway set to %s:%u, local set to %s:%u"), gatewayAddress.c_str(), gatewayPort, localAddress.c_str(), localPort);
if (!gatewayAddress.IsEmpty() && gatewayPort > 0U && localPort > 0U) {
CSplitRepeaterProtocolHandler* handler = new CSplitRepeaterProtocolHandler(localAddress, localPort);
bool res = handler->open();
if (!res)
wxLogError(wxT("Cannot open the protocol handler"));
else
thread->setProtocolHandler(handler);
thread->setGateway(gatewayAddress, gatewayPort);
}
unsigned int timeout, ackTime;
getTimes(timeout, ackTime);
thread->setTimes(timeout, ackTime);
wxLogInfo(wxT("Timeout set to %u secs, ack time set to %u ms"), timeout, ackTime);
unsigned int beaconTime;
wxString beaconText;
bool beaconVoice;
TEXT_LANG language;
getBeacon(beaconTime, beaconText, beaconVoice, language);
thread->setBeacon(beaconTime, beaconText, beaconVoice, language);
wxLogInfo(wxT("Beacon set to %u mins, text set to \"%s\", voice set to %d, language set to %d"), beaconTime / 60U, beaconText.c_str(), int(beaconVoice), int(language));
wxString receiver1Address;
unsigned int receiver1Port;
getReceiver1(receiver1Address, receiver1Port);
if (!receiver1Address.IsEmpty() && receiver1Port > 0U) {
wxLogInfo(wxT("Receiver 1 set to %s:%u"), receiver1Address.c_str(), receiver1Port);
bool res = thread->setReceiver1(receiver1Address, receiver1Port);
if (!res)
wxLogError(wxT("The IP address is invalid"));
}
wxString receiver2Address;
unsigned int receiver2Port;
getReceiver2(receiver2Address, receiver2Port);
if (!receiver2Address.IsEmpty() && receiver2Port > 0U) {
wxLogInfo(wxT("Receiver 2 set to %s:%u"), receiver2Address.c_str(), receiver2Port);
bool res = thread->setReceiver2(receiver2Address, receiver2Port);
if (!res)
wxLogError(wxT("The IP address is invalid"));
}
wxString transmitter1Address;
unsigned int transmitter1Port;
getTransmitter1(transmitter1Address, transmitter1Port);
if (!transmitter1Address.IsEmpty() && transmitter1Port > 0U) {
wxLogInfo(wxT("Transmitter 1 set to %s:%u"), transmitter1Address.c_str(), transmitter1Port);
bool res = thread->setTransmitter1(transmitter1Address, transmitter1Port);
if (!res)
wxLogError(wxT("The IP address is invalid"));
}
wxString transmitter2Address;
unsigned int transmitter2Port;
getTransmitter2(transmitter2Address, transmitter2Port);
if (!transmitter2Address.IsEmpty() && transmitter2Port > 0U) {
wxLogInfo(wxT("Transmitter 2 set to %s:%u"), transmitter2Address.c_str(), transmitter2Port);
bool res = thread->setTransmitter2(transmitter2Address, transmitter2Port);
if (!res)
wxLogError(wxT("The IP address is invalid"));
}
bool enabled;
wxString rpt1Callsign, rpt2Callsign;
wxString shutdown, startup;
wxString status1, status2, status3, status4, status5;
wxString command1, command1Line, command2, command2Line;
wxString command3, command3Line, command4, command4Line;
getControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line);
thread->setControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line);
wxLogInfo(wxT("Control: enabled: %d, RPT1: %s, RPT2: %s, shutdown: %s, startup: %s, status1: %s, status2: %s, status3: %s, status4: %s, status5: %s, command1: %s = %s, command2: %s = %s, command3: %s = %s, command4: %s = %s"), enabled, rpt1Callsign.c_str(), rpt2Callsign.c_str(), shutdown.c_str(), startup.c_str(), status1.c_str(), status2.c_str(), status3.c_str(), status4.c_str(), status5.c_str(), command1.c_str(), command1Line.c_str(), command2.c_str(), command2Line.c_str(), command3.c_str(), command3Line.c_str(), command4.c_str(), command4Line.c_str());
wxFileName wlFilename(wxFileName::GetHomeDir(), WHITELIST_FILE_NAME);
bool exists = wlFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(wlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open white list file - %s"), wlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the white list"), list->getCount());
thread->setWhiteList(list);
}
}
wxFileName blFilename(wxFileName::GetHomeDir(), BLACKLIST_FILE_NAME);
exists = blFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(blFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open black list file - %s"), blFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the black list"), list->getCount());
thread->setBlackList(list);
}
}
// Convert the worker class into a thread
m_thread = new CSplitRepeaterThreadHelper(thread);
m_thread->start();
}
bool CDVAPNodeD::createThread()
{
CDVAPNodeConfig config(m_confDir, m_name);
wxString callsign, gateway;
DSTAR_MODE mode;
ACK_TYPE ack;
bool restriction, rpt1Validation;
config.getCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
switch (mode) {
case MODE_RXONLY:
m_thread = new CDVAPNodeRXThread;
break;
case MODE_TXONLY:
m_thread = new CDVAPNodeTXThread;
break;
default:
m_thread = new CDVAPNodeTRXThread;
break;
}
m_thread->setCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
wxLogInfo(wxT("Callsign set to \"%s\", gateway set to \"%s\", mode: %d, ack: %d, restriction: %d, RPT1 validation: %d"), callsign.c_str(), gateway.c_str(), int(mode), int(ack), restriction, rpt1Validation);
wxString gatewayAddress, localAddress;
unsigned int gatewayPort, localPort;
config.getNetwork(gatewayAddress, gatewayPort, localAddress, localPort);
wxLogInfo(wxT("Gateway set to %s:%u, local set to %s:%u"), gatewayAddress.c_str(), gatewayPort, localAddress.c_str(), localPort);
if (!gatewayAddress.IsEmpty()) {
CRepeaterProtocolHandler* handler = new CRepeaterProtocolHandler(gatewayAddress, gatewayPort, localAddress, localPort);
bool res = handler->open();
if (!res) {
wxLogError(wxT("Cannot open the protocol handler"));
return false;
}
m_thread->setProtocolHandler(handler);
}
unsigned int timeout, ackTime;
config.getTimes(timeout, ackTime);
m_thread->setTimes(timeout, ackTime);
wxLogInfo(wxT("Timeout set to %u secs, ack time set to %u ms"), timeout, ackTime);
unsigned int beaconTime;
wxString beaconText;
bool beaconVoice;
TEXT_LANG language;
config.getBeacon(beaconTime, beaconText, beaconVoice, language);
m_thread->setBeacon(beaconTime, beaconText, beaconVoice, language);
wxLogInfo(wxT("Beacon set to %u mins, text set to \"%s\", voice set to %d, language set to %d"), beaconTime / 60U, beaconText.c_str(), int(beaconVoice), int(language));
wxString dvapPort;
unsigned int dvapFrequency;
int dvapPower, dvapSquelch, dvapOffset;
config.getDVAP(dvapPort, dvapFrequency, dvapPower, dvapSquelch, dvapOffset);
wxLogInfo(wxT("DVAP: port: %s, frequency: %u Hz, power: %d dBm, squelch: %d dBm, offset: %d Hz"), dvapPort.c_str(), dvapFrequency, dvapPower, dvapSquelch, dvapOffset);
if (!dvapPort.IsEmpty()) {
CDVAPController* dvap = new CDVAPController(dvapPort, dvapFrequency, dvapPower, dvapSquelch, dvapOffset);
bool res = dvap->open();
if (!res) {
wxLogError(wxT("Unable to open the DVAP"));
return false;
}
m_thread->setDVAP(dvap);
}
wxFileName wlFilename(wxFileName::GetHomeDir(), WHITELIST_FILE_NAME);
bool exists = wlFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(wlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open white list file - %s"), wlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the white list"), list->getCount());
m_thread->setWhiteList(list);
}
}
wxFileName blFilename(wxFileName::GetHomeDir(), BLACKLIST_FILE_NAME);
exists = blFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(blFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open black list file - %s"), blFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the black list"), list->getCount());
m_thread->setBlackList(list);
}
}
return true;
}
void CDVRPTRRepeaterApp::createThread()
{
wxString callsign, gateway;
DSTAR_MODE mode;
ACK_TYPE ack;
bool restriction, rpt1Validation;
getCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
IDVRPTRRepeaterThread* thread = NULL;
switch (mode) {
case MODE_RXONLY:
thread = new CDVRPTRRepeaterRXThread;
break;
case MODE_TXONLY:
thread = new CDVRPTRRepeaterTXThread;
break;
case MODE_TXANDRX:
thread = new CDVRPTRRepeaterTXRXThread;
break;
default:
thread = new CDVRPTRRepeaterTRXThread;
break;
}
thread->setCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
wxLogInfo(wxT("Callsign set to \"%s\", gateway set to \"%s\", mode: %d, ack: %d, restriction: %d, RPT1 validation: %d"), callsign.c_str(), gateway.c_str(), int(mode), int(ack), restriction, rpt1Validation);
wxString gatewayAddress, localAddress;
unsigned int gatewayPort, localPort;
getNetwork(gatewayAddress, gatewayPort, localAddress, localPort);
wxLogInfo(wxT("Gateway set to %s:%u, local set to %s:%u"), gatewayAddress.c_str(), gatewayPort, localAddress.c_str(), localPort);
if (!gatewayAddress.IsEmpty()) {
CRepeaterProtocolHandler* handler = new CRepeaterProtocolHandler(gatewayAddress, gatewayPort, localAddress, localPort);
bool res = handler->open();
if (!res)
wxLogError(wxT("Cannot open the protocol handler"));
else
thread->setProtocolHandler(handler);
}
unsigned int timeout, ackTime;
getTimes(timeout, ackTime);
thread->setTimes(timeout, ackTime);
wxLogInfo(wxT("Timeout set to %u secs, ack time set to %u ms"), timeout, ackTime);
unsigned int beaconTime;
wxString beaconText;
bool beaconVoice;
TEXT_LANG language;
getBeacon(beaconTime, beaconText, beaconVoice, language);
if (mode == MODE_GATEWAY)
beaconTime = 0U;
thread->setBeacon(beaconTime, beaconText, beaconVoice, language);
wxLogInfo(wxT("Beacon set to %u mins, text set to \"%s\", voice set to %d, language set to %d"), beaconTime / 60U, beaconText.c_str(), int(beaconVoice), int(language));
DVRPTR_VERSION modemVersion;
CONNECTION_TYPE modemType;
wxString modemUSBPort, modemAddress, modemUSBPath;
bool rxInvert, txInvert, channel;
unsigned int modemPort, modLevel, txDelay;
getModem(modemVersion, modemType, modemUSBPort, modemAddress, modemPort, rxInvert, txInvert, channel, modLevel, txDelay);
wxLogInfo(wxT("DV-RPTR modem: version: %d, type: %d, USB port: %s, address: %s:%u, RX invert: %d, TX invert: %d, channel: %s, mod level: %u%%, TX delay: %u ms"), int(modemVersion), int(modemType), modemUSBPort.c_str(), modemAddress.c_str(), modemPort, int(rxInvert), int(txInvert), channel ? wxT("B") : wxT("A"), modLevel, txDelay);
if (modemType == CT_USB) {
if (!modemUSBPort.IsEmpty()) {
getModem(modemUSBPath);
if (!modemUSBPath.IsEmpty())
wxLogInfo(wxT("DV-RPTR modem: path: %s"), modemUSBPath.c_str());
IDVRPTRController* controller = NULL;
switch (modemVersion) {
case DVRPTR_V1:
controller = new CDVRPTRControllerV1(modemUSBPort, modemUSBPath, rxInvert, txInvert, channel, modLevel, txDelay);
break;
case DVRPTR_V2:
controller = new CDVRPTRControllerV2(modemUSBPort, modemUSBPath, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign);
break;
default:
wxLogError(wxT("Unknown DV-RPTR modem version - %d"), int(modemVersion));
break;
}
if (controller != NULL) {
bool res = controller->open();
if (!res) {
wxLogError(wxT("Cannot open the DV-RPTR modem"));
} else {
thread->setModem(controller);
setModem(controller->getPath());
}
}
}
} else if (modemType == CT_NETWORK) {
if (!modemAddress.IsEmpty()) {
CDVRPTRControllerV2* controller = new CDVRPTRControllerV2(modemAddress, modemPort, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign);
bool res = controller->open();
if (!res)
wxLogError(wxT("Cannot open the DV-RPTR modem"));
else
thread->setModem(controller);
}
}
wxString controllerType;
unsigned int activeHangTime;
getController(controllerType, activeHangTime);
wxLogInfo(wxT("Controller set to %s, active hang time: %u ms"), controllerType.c_str(), activeHangTime);
CExternalController* controller = NULL;
wxString port;
if (controllerType.StartsWith(wxT("Velleman K8055 - "), &port)) {
unsigned long num;
port.ToULong(&num);
controller = new CExternalController(new CK8055Controller(num), false, false);
} else if (controllerType.IsSameAs(wxT("Raspberry Pi"))) {
controller = new CExternalController(new CRaspberryController, false, false);
} else {
controller = new CExternalController(new CDummyController, false, false);
}
bool res = controller->open();
if (!res)
wxLogError(wxT("Cannot open the hardware interface - %s"), controllerType.c_str());
else
thread->setController(controller, activeHangTime);
bool out1, out2, out3, out4;
getOutputs(out1, out2, out3, out4);
thread->setOutputs(out1, out2, out3, out4);
m_frame->setOutputs(out1, out2, out3, out4);
wxLogInfo(wxT("Output 1 = %d, output 2 = %d, output 3 = %d, output 4 = %d"), out1, out2, out3, out4);
bool enabled;
wxString rpt1Callsign, rpt2Callsign;
wxString shutdown, startup;
wxString status1, status2, status3, status4, status5;
wxString command1, command1Line, command2, command2Line;
wxString command3, command3Line, command4, command4Line;
wxString output1, output2, output3, output4;
getControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, output1, output2, output3, output4);
thread->setControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, output1, output2, output3, output4);
wxLogInfo(wxT("Control: enabled: %d, RPT1: %s, RPT2: %s, shutdown: %s, startup: %s, status1: %s, status2: %s, status3: %s, status4: %s, status5: %s, command1: %s = %s, command2: %s = %s, command3: %s = %s, command4: %s = %s, output1: %s, output2: %s, output3: %s, output4: %s"), enabled, rpt1Callsign.c_str(), rpt2Callsign.c_str(), shutdown.c_str(), startup.c_str(), status1.c_str(), status2.c_str(), status3.c_str(), status4.c_str(), status5.c_str(), command1.c_str(), command1Line.c_str(), command2.c_str(), command2Line.c_str(), command3.c_str(), command3Line.c_str(), command4.c_str(), command4Line.c_str(), output1.c_str(), output2.c_str(), output3.c_str(), output4.c_str());
bool logging;
getLogging(logging);
thread->setLogging(logging, m_audioDir);
m_frame->setLogging(logging);
wxLogInfo(wxT("Frame logging set to %d, in %s"), int(logging), m_audioDir.c_str());
wxFileName wlFilename(wxFileName::GetHomeDir(), WHITELIST_FILE_NAME);
bool exists = wlFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(wlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open white list file - %s"), wlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the white list"), list->getCount());
thread->setWhiteList(list);
}
}
wxFileName blFilename(wxFileName::GetHomeDir(), BLACKLIST_FILE_NAME);
exists = blFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(blFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open black list file - %s"), blFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the black list"), list->getCount());
thread->setBlackList(list);
}
}
// Convert the worker class into a thread
m_thread = new CDVRPTRRepeaterThreadHelper(thread);
m_thread->start();
}
void CIRCDDBGatewayApp::createThread()
{
wxASSERT(m_config != NULL);
CIRCDDBGatewayThread* thread = new CIRCDDBGatewayThread(m_logDir, m_name);
GATEWAY_TYPE gatewayType;
wxString gatewayCallsign, gatewayAddress, icomAddress, hbAddress, description1, description2, url;
unsigned int icomPort, hbPort;
double latitude, longitude;
m_config->getGateway(gatewayType, gatewayCallsign, gatewayAddress, icomAddress, icomPort, hbAddress, hbPort, latitude, longitude, description1, description2, url);
gatewayCallsign.MakeUpper();
gatewayCallsign.Append(wxT(" "));
gatewayCallsign.Truncate(LONG_CALLSIGN_LENGTH - 1U);
wxString callsign = gatewayCallsign;
callsign.Append(wxT(" "));
gatewayCallsign.Append(wxT("G"));
wxLogInfo(wxT("Gateway type: %d, callsign: \"%s\", address: %s, Icom address: %s:%u, homebrew address: %s:%u, latitude: %lf, longitude: %lf, description: \"%s %s\", URL: \"%s\""), int(gatewayType), gatewayCallsign.c_str(), gatewayAddress.c_str(), icomAddress.c_str(), icomPort, hbAddress.c_str(), hbPort, latitude, longitude, description1.c_str(), description2.c_str(), url.c_str());
thread->setGateway(gatewayType, gatewayCallsign, gatewayAddress);
wxString aprsHostname;
unsigned int aprsPort;
bool aprsEnabled;
m_config->getDPRS(aprsEnabled, aprsHostname, aprsPort);
wxLogInfo(wxT("APRS enabled: %d, host: %s:%u"), int(aprsEnabled), aprsHostname.c_str(), aprsPort);
CAPRSWriter* aprs = NULL;
if (aprsEnabled && !gatewayCallsign.IsEmpty() && !aprsHostname.IsEmpty() && aprsPort != 0U) {
aprs = new CAPRSWriter(aprsHostname, aprsPort, gatewayCallsign, gatewayAddress);
bool res = aprs->open();
if (!res)
wxLogError(wxT("Cannot initialise the APRS data writer"));
else
thread->setAPRSWriter(aprs);
}
TEXT_LANG language;
bool infoEnabled, echoEnabled, logEnabled, dratsEnabled, dtmfEnabled;
m_config->getMiscellaneous(language, infoEnabled, echoEnabled, logEnabled, dratsEnabled, dtmfEnabled);
wxLogInfo(wxT("Language: %d, info enabled: %d, echo enabled: %d, log enabled : %d, D-RATS enabled: %d, DTMF control enabled: %d"), int(language), int(infoEnabled), int(echoEnabled), int(logEnabled), int(dratsEnabled), int(dtmfEnabled));
CIcomRepeaterProtocolHandler* icomRepeaterHandler = NULL;
CHBRepeaterProtocolHandler* hbRepeaterHandler = NULL;
CDummyRepeaterProtocolHandler* dummyRepeaterHandler = NULL;
unsigned int icomCount = 0U;
wxString repeaterCall1, repeaterBand1, repeaterAddress1, reflector1, description11, description12, url1;
double frequency1, offset1, range1, latitude1, longitude1, agl1;
unsigned char band11, band12, band13;
unsigned int repeaterPort1;
HW_TYPE repeaterType1;
bool atStartup1;
RECONNECT reconnect1;
m_config->getRepeater1(repeaterCall1, repeaterBand1, repeaterType1, repeaterAddress1, repeaterPort1, band11, band12, band13, reflector1, atStartup1, reconnect1, frequency1, offset1, range1, latitude1, longitude1, agl1, description11, description12, url1);
CUtils::clean(description11, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
CUtils::clean(description12, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
CUtils::clean(url1, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
wxString callsign1 = callsign;
if (!repeaterBand1.IsSameAs(wxT(" "))) {
if (!repeaterCall1.IsEmpty()) {
callsign1 = repeaterCall1;
callsign1.Append(wxT(" "));
callsign1.Truncate(LONG_CALLSIGN_LENGTH);
}
wxLogInfo(wxT("Repeater 1 callsign: \"%.7s%s\", hardware type: %d, address: %s:%u"), callsign1.c_str(), repeaterBand1.c_str(), int(repeaterType1), repeaterAddress1.c_str(), repeaterPort1);
wxLogInfo(wxT("Repeater 1 reflector: %s, at startup: %d, reconnect: %d"), reflector1.c_str(), atStartup1, reconnect1);
wxLogInfo(wxT("Repeater 1 latitude: %lf, longitude: %lf, range: %.0lf kms, height: %.0lf m, frequency: %.4lf MHz, offset: %.4lf MHz"), latitude1, longitude1, range1, agl1, frequency1, offset1);
wxLogInfo(wxT("Repeater 1 description: \"%s %s\", URL: \"%s\""), description11.c_str(), description12.c_str(), url1.c_str());
if (repeaterType1 == HW_ICOM && !icomAddress.IsEmpty()) {
icomRepeaterHandler = new CIcomRepeaterProtocolHandler(icomAddress, icomPort, repeaterAddress1, repeaterPort1);
bool res = icomRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Icom repeater protocol handler"));
delete icomRepeaterHandler;
icomRepeaterHandler = NULL;
}
} else if (repeaterType1 == HW_HOMEBREW && !hbAddress.IsEmpty()) {
hbRepeaterHandler = new CHBRepeaterProtocolHandler(hbAddress, hbPort);
bool res = hbRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Homebrew repeater protocol handler"));
delete hbRepeaterHandler;
hbRepeaterHandler = NULL;
}
} else if (repeaterType1 == HW_DUMMY && !hbAddress.IsEmpty()) {
dummyRepeaterHandler = new CDummyRepeaterProtocolHandler;
bool res = dummyRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Dummy repeater protocol handler"));
delete dummyRepeaterHandler;
dummyRepeaterHandler = NULL;
}
}
if (latitude1 == 0.0 && longitude1 == 0.0) {
latitude1 = latitude;
longitude1 = longitude;
}
if (description11.IsEmpty())
description11 = description1;
if (description12.IsEmpty())
description12 = description2;
if (url1.IsEmpty())
url1 = url;
if (repeaterType1 == HW_ICOM && icomRepeaterHandler != NULL) {
wxLogInfo(wxT("Repeater 1 bands: %u %u %u"), band11, band12, band13);
thread->addRepeater(callsign1, repeaterBand1, repeaterAddress1, repeaterPort1, repeaterType1, reflector1, atStartup1, reconnect1, dratsEnabled, frequency1, offset1, range1, latitude1, longitude1, agl1, description11, description12, url1, icomRepeaterHandler, band11, band12, band13);
if (aprs != NULL)
aprs->setPort(callsign1, repeaterBand1, frequency1, offset1, range1, latitude1, longitude1, agl1);
icomCount++;
} else if (repeaterType1 == HW_HOMEBREW && hbRepeaterHandler != NULL) {
thread->addRepeater(callsign1, repeaterBand1, repeaterAddress1, repeaterPort1, repeaterType1, reflector1, atStartup1, reconnect1, dratsEnabled, frequency1, offset1, range1, latitude1, longitude1, agl1, description11, description12, url1, hbRepeaterHandler);
if (aprs != NULL)
aprs->setPort(callsign1, repeaterBand1, frequency1, offset1, range1, latitude1, longitude1, agl1);
} else if (repeaterType1 == HW_DUMMY && dummyRepeaterHandler != NULL) {
thread->addRepeater(callsign1, repeaterBand1, repeaterAddress1, repeaterPort1, repeaterType1, reflector1, atStartup1, reconnect1, dratsEnabled, frequency1, offset1, range1, latitude1, longitude1, agl1, description11, description12, url1, dummyRepeaterHandler);
}
}
wxString repeaterCall2, repeaterBand2, repeaterAddress2, reflector2, description21, description22, url2;
double frequency2, offset2, range2, latitude2, longitude2, agl2;
unsigned char band21, band22, band23;
unsigned int repeaterPort2;
HW_TYPE repeaterType2;
bool atStartup2;
RECONNECT reconnect2;
m_config->getRepeater2(repeaterCall2, repeaterBand2, repeaterType2, repeaterAddress2, repeaterPort2, band21, band22, band23, reflector2, atStartup2, reconnect2, frequency2, offset2, range2, latitude2, longitude2, agl2, description21, description22, url2);
CUtils::clean(description21, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
CUtils::clean(description22, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
CUtils::clean(url2, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
wxString callsign2 = callsign;
if (!repeaterBand2.IsSameAs(wxT(" "))) {
if (!repeaterCall2.IsEmpty()) {
callsign2 = repeaterCall2;
callsign2.Append(wxT(" "));
callsign2.Truncate(LONG_CALLSIGN_LENGTH);
}
wxLogInfo(wxT("Repeater 2 callsign: \"%.7s%s\", hardware type: %d, address: %s:%u"), callsign2.c_str(), repeaterBand2.c_str(), int(repeaterType2), repeaterAddress2.c_str(), repeaterPort2);
wxLogInfo(wxT("Repeater 2 reflector: %s, at startup: %d, reconnect: %d"), reflector2.c_str(), atStartup2, reconnect2);
wxLogInfo(wxT("Repeater 2 latitude: %lf, longitude: %lf, range: %.0lf kms, height: %.0lf m, frequency: %.4lf MHz, offset: %.4lf MHz"), latitude2, longitude2, range2, agl2, frequency2, offset2);
wxLogInfo(wxT("Repeater 2 description: \"%s %s\", URL: \"%s\""), description21.c_str(), description22.c_str(), url2.c_str());
if (callsign1.IsSameAs(callsign2) && repeaterBand1.IsSameAs(repeaterBand2)) {
wxLogError(wxT("Repeater 2 has the same callsign and module as repeater 1, exiting"));
return;
}
if (repeaterType2 == HW_ICOM && !icomAddress.IsEmpty() && icomRepeaterHandler == NULL) {
icomRepeaterHandler = new CIcomRepeaterProtocolHandler(icomAddress, icomPort, repeaterAddress2, repeaterPort2);
bool res = icomRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Icom repeater protocol handler"));
delete icomRepeaterHandler;
icomRepeaterHandler = NULL;
}
} else if (repeaterType2 == HW_HOMEBREW && !hbAddress.IsEmpty() && hbRepeaterHandler == NULL) {
hbRepeaterHandler = new CHBRepeaterProtocolHandler(hbAddress, hbPort);
bool res = hbRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Homebrew repeater protocol handler"));
delete hbRepeaterHandler;
hbRepeaterHandler = NULL;
}
} else if (repeaterType2 == HW_DUMMY && !hbAddress.IsEmpty() && dummyRepeaterHandler == NULL) {
dummyRepeaterHandler = new CDummyRepeaterProtocolHandler;
bool res = dummyRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Dummy repeater protocol handler"));
delete dummyRepeaterHandler;
dummyRepeaterHandler = NULL;
}
}
if (latitude2 == 0.0 && longitude2 == 0.0) {
latitude2 = latitude;
longitude2 = longitude;
}
if (description21.IsEmpty())
description21 = description1;
if (description22.IsEmpty())
description22 = description2;
if (url2.IsEmpty())
url2 = url;
if (repeaterType2 == HW_ICOM && icomRepeaterHandler != NULL) {
wxLogInfo(wxT("Repeater 2 bands: %u %u %u"), band21, band22, band23);
thread->addRepeater(callsign2, repeaterBand2, repeaterAddress2, repeaterPort2, repeaterType2, reflector2, atStartup2, reconnect2, dratsEnabled, frequency2, offset2, range2, latitude2, longitude2, agl2, description21, description22, url2, icomRepeaterHandler, band21, band22, band23);
if (aprs != NULL)
aprs->setPort(callsign2, repeaterBand2, frequency2, offset2, range2, latitude2, longitude2, agl2);
icomCount++;
} else if (repeaterType2 == HW_HOMEBREW && hbRepeaterHandler != NULL) {
thread->addRepeater(callsign2, repeaterBand2, repeaterAddress2, repeaterPort2, repeaterType2, reflector2, atStartup2, reconnect2, dratsEnabled, frequency2, offset2, range2, latitude2, longitude2, agl2, description21, description22, url2, hbRepeaterHandler);
if (aprs != NULL)
aprs->setPort(callsign2, repeaterBand2, frequency2, offset2, range2, latitude2, longitude2, agl2);
} else if (repeaterType2 == HW_DUMMY && dummyRepeaterHandler != NULL) {
thread->addRepeater(callsign2, repeaterBand2, repeaterAddress2, repeaterPort2, repeaterType2, reflector2, atStartup2, reconnect2, dratsEnabled, frequency2, offset2, range2, latitude2, longitude2, agl2, description21, description22, url2, dummyRepeaterHandler);
}
}
wxString repeaterCall3, repeaterBand3, repeaterAddress3, reflector3, description31, description32, url3;
double frequency3, offset3, range3, latitude3, longitude3, agl3;
unsigned char band31, band32, band33;
unsigned int repeaterPort3;
HW_TYPE repeaterType3;
bool atStartup3;
RECONNECT reconnect3;
m_config->getRepeater3(repeaterCall3, repeaterBand3, repeaterType3, repeaterAddress3, repeaterPort3, band31, band32, band33, reflector3, atStartup3, reconnect3, frequency3, offset3, range3, latitude3, longitude3, agl3, description31, description32, url3);
CUtils::clean(description31, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
CUtils::clean(description32, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
CUtils::clean(url3, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
wxString callsign3 = callsign;
if (!repeaterBand3.IsSameAs(wxT(" "))) {
if (!repeaterCall3.IsEmpty()) {
callsign3 = repeaterCall3;
callsign3.Append(wxT(" "));
callsign3.Truncate(LONG_CALLSIGN_LENGTH);
}
wxLogInfo(wxT("Repeater 3 callsign: \"%.7s%s\", hardware type: %d, address: %s:%u"), callsign3.c_str(), repeaterBand3.c_str(), int(repeaterType3), repeaterAddress3.c_str(), repeaterPort3);
wxLogInfo(wxT("Repeater 3 reflector: %s, at startup: %d, reconnect: %d"), reflector3.c_str(), atStartup3, reconnect3);
wxLogInfo(wxT("Repeater 3 latitude: %lf, longitude: %lf, range: %.0lf kms, height: %.0lf m, frequency: %.4lf MHz, offset: %.4lf MHz"), latitude3, longitude3, range3, agl3, frequency3, offset3);
wxLogInfo(wxT("Repeater 3 description: \"%s %s\", URL: \"%s\""), description31.c_str(), description32.c_str(), url3.c_str());
if (callsign1.IsSameAs(callsign3) && repeaterBand1.IsSameAs(repeaterBand3)) {
wxLogError(wxT("Repeater 3 has the same callsign and module as repeater 1, exiting"));
return;
}
if (callsign2.IsSameAs(callsign3) && repeaterBand2.IsSameAs(repeaterBand3)) {
wxLogError(wxT("Repeater 3 has the same callsign and module as repeater 2, exiting"));
return;
}
if (repeaterType3 == HW_ICOM && !icomAddress.IsEmpty() && icomRepeaterHandler == NULL) {
icomRepeaterHandler = new CIcomRepeaterProtocolHandler(icomAddress, icomPort, repeaterAddress3, repeaterPort3);
bool res = icomRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Icom repeater protocol handler"));
delete icomRepeaterHandler;
icomRepeaterHandler = NULL;
}
} else if (repeaterType3 == HW_HOMEBREW && !hbAddress.IsEmpty() && hbRepeaterHandler == NULL) {
hbRepeaterHandler = new CHBRepeaterProtocolHandler(hbAddress, hbPort);
bool res = hbRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Homebrew repeater protocol handler"));
delete hbRepeaterHandler;
hbRepeaterHandler = NULL;
}
} else if (repeaterType3 == HW_DUMMY && !hbAddress.IsEmpty() && dummyRepeaterHandler == NULL) {
dummyRepeaterHandler = new CDummyRepeaterProtocolHandler;
bool res = dummyRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Dummy repeater protocol handler"));
delete dummyRepeaterHandler;
dummyRepeaterHandler = NULL;
}
}
if (latitude3 == 0.0 && longitude3 == 0.0) {
latitude3 = latitude;
longitude3 = longitude;
}
if (description31.IsEmpty())
description31 = description1;
if (description32.IsEmpty())
description32 = description2;
if (url3.IsEmpty())
url3 = url;
if (repeaterType3 == HW_ICOM && icomRepeaterHandler != NULL) {
wxLogInfo(wxT("Repeater 3 bands: %u %u %u"), band31, band32, band33);
thread->addRepeater(callsign3, repeaterBand3, repeaterAddress3, repeaterPort3, repeaterType3, reflector3, atStartup3, reconnect3, dratsEnabled, frequency3, offset3, range3, latitude3, longitude3, agl3, description31, description32, url3, icomRepeaterHandler, band31, band32, band33);
if (aprs != NULL)
aprs->setPort(callsign3, repeaterBand3, frequency3, offset3, range3, latitude3, longitude3, agl3);
icomCount++;
} else if (repeaterType3 == HW_HOMEBREW && hbRepeaterHandler != NULL) {
thread->addRepeater(callsign3, repeaterBand3, repeaterAddress3, repeaterPort3, repeaterType3, reflector3, atStartup3, reconnect3, dratsEnabled, frequency3, offset3, range3, latitude3, longitude3, agl3, description31, description32, url3, hbRepeaterHandler);
if (aprs != NULL)
aprs->setPort(callsign3, repeaterBand3, frequency3, offset3, range3, latitude3, longitude3, agl3);
} else if (repeaterType3 == HW_DUMMY && dummyRepeaterHandler != NULL) {
thread->addRepeater(callsign3, repeaterBand3, repeaterAddress3, repeaterPort3, repeaterType3, reflector3, atStartup3, reconnect3, dratsEnabled, frequency3, offset3, range3, latitude3, longitude3, agl3, description31, description32, url3, dummyRepeaterHandler);
}
}
wxString repeaterCall4, repeaterBand4, repeaterAddress4, reflector4, description41, description42, url4;
double frequency4, offset4, range4, latitude4, longitude4, agl4;
unsigned char band41, band42, band43;
unsigned int repeaterPort4;
HW_TYPE repeaterType4;
bool atStartup4;
RECONNECT reconnect4;
m_config->getRepeater4(repeaterCall4, repeaterBand4, repeaterType4, repeaterAddress4, repeaterPort4, band41, band42, band43, reflector4, atStartup4, reconnect4, frequency4, offset4, range4, latitude4, longitude4, agl4, description41, description42, url4);
CUtils::clean(description41, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
CUtils::clean(description42, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
CUtils::clean(url4, wxT("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 .,&*()-+=@/?:;"));
wxString callsign4 = callsign;
if (!repeaterBand4.IsSameAs(wxT(" "))) {
if (!repeaterCall4.IsEmpty()) {
callsign4 = repeaterCall4;
callsign4.Append(wxT(" "));
callsign4.Truncate(LONG_CALLSIGN_LENGTH);
}
wxLogInfo(wxT("Repeater 4 callsign: \"%.7s%s\", hardware type: %d, address: %s:%u"), callsign4.c_str(), repeaterBand4.c_str(), int(repeaterType4), repeaterAddress4.c_str(), repeaterPort4);
wxLogInfo(wxT("Repeater 4 reflector: %s, at startup: %d, reconnect: %d"), reflector4.c_str(), atStartup4, reconnect4);
wxLogInfo(wxT("Repeater 4 latitude: %lf, longitude: %lf, range: %.0lf kms, height: %.0lf m, frequency: %.4lf MHz, offset: %.4lf MHz"), latitude4, longitude4, range4, agl4, frequency4, offset4);
wxLogInfo(wxT("Repeater 4 description: \"%s %s\", URL: \"%s\""), description41.c_str(), description42.c_str(), url4.c_str());
if (callsign1.IsSameAs(callsign4) && repeaterBand1.IsSameAs(repeaterBand4)) {
wxLogError(wxT("Repeater 4 has the same callsign and module as repeater 1, exiting"));
return;
}
if (callsign2.IsSameAs(callsign4) && repeaterBand2.IsSameAs(repeaterBand4)) {
wxLogError(wxT("Repeater 4 has the same callsign and module as repeater 2, exiting"));
return;
}
if (callsign3.IsSameAs(callsign4) && repeaterBand3.IsSameAs(repeaterBand4)) {
wxLogError(wxT("Repeater 4 has the same callsign and module as repeater 3, exiting"));
return;
}
if (repeaterType4 == HW_ICOM && !icomAddress.IsEmpty() && icomRepeaterHandler == NULL) {
icomRepeaterHandler = new CIcomRepeaterProtocolHandler(icomAddress, icomPort, repeaterAddress4, repeaterPort4);
bool res = icomRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Icom repeater protocol handler"));
delete icomRepeaterHandler;
icomRepeaterHandler = NULL;
}
} else if (repeaterType4 == HW_HOMEBREW && !hbAddress.IsEmpty() && hbRepeaterHandler == NULL) {
hbRepeaterHandler = new CHBRepeaterProtocolHandler(hbAddress, hbPort);
bool res = hbRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Homebrew repeater protocol handler"));
delete hbRepeaterHandler;
hbRepeaterHandler = NULL;
}
} else if (repeaterType4 == HW_DUMMY && !hbAddress.IsEmpty() && dummyRepeaterHandler == NULL) {
dummyRepeaterHandler = new CDummyRepeaterProtocolHandler;
bool res = dummyRepeaterHandler->open();
if (!res) {
wxLogError(wxT("Cannot open the Dummy repeater protocol handler"));
delete dummyRepeaterHandler;
dummyRepeaterHandler = NULL;
}
}
if (latitude4 == 0.0 && longitude4 == 0.0) {
latitude4 = latitude;
longitude4 = longitude;
}
if (description41.IsEmpty())
description41 = description1;
if (description42.IsEmpty())
description42 = description2;
if (url4.IsEmpty())
url4 = url;
if (repeaterType4 == HW_ICOM && icomRepeaterHandler != NULL) {
wxLogInfo(wxT("Repeater 4 bands: %u %u %u"), band41, band42, band43);
thread->addRepeater(callsign4, repeaterBand4, repeaterAddress4, repeaterPort4, repeaterType4, reflector4, atStartup4, reconnect4, dratsEnabled, frequency4, offset4, range4, latitude4, longitude4, agl4, description41, description42, url4, icomRepeaterHandler, band41, band42, band43);
if (aprs != NULL)
aprs->setPort(callsign4, repeaterBand4, frequency4, offset4, range4, latitude4, longitude4, agl4);
icomCount++;
} else if (repeaterType4 == HW_HOMEBREW && hbRepeaterHandler != NULL) {
thread->addRepeater(callsign4, repeaterBand4, repeaterAddress4, repeaterPort4, repeaterType4, reflector4, atStartup4, reconnect4, dratsEnabled, frequency4, offset4, range4, latitude4, longitude4, agl4, description41, description42, url4, hbRepeaterHandler);
if (aprs != NULL)
aprs->setPort(callsign4, repeaterBand4, frequency4, offset4, range4, latitude4, longitude4, agl4);
} else if (repeaterType4 == HW_DUMMY && dummyRepeaterHandler != NULL) {
thread->addRepeater(callsign4, repeaterBand4, repeaterAddress4, repeaterPort4, repeaterType4, reflector4, atStartup4, reconnect4, dratsEnabled, frequency4, offset4, range4, latitude4, longitude4, agl4, description41, description42, url4, dummyRepeaterHandler);
}
}
if (icomRepeaterHandler != NULL)
icomRepeaterHandler->setCount(icomCount);
bool ircDDBEnabled;
wxString ircDDBHostname, ircDDBUsername, ircDDBPassword;
m_config->getIrcDDB(ircDDBEnabled, ircDDBHostname, ircDDBUsername, ircDDBPassword);
wxLogInfo(wxT("ircDDB enabled: %d, host: %s, username: %s"), int(ircDDBEnabled), ircDDBHostname.c_str(), ircDDBUsername.c_str());
if (ircDDBEnabled) {
#if defined(__WINDOWS__)
CIRCDDB* ircDDB = new CIRCDDB(ircDDBHostname, 9007U, ircDDBUsername, ircDDBPassword, wxT("win_") + LOG_BASE_NAME + wxT("-") + VERSION, gatewayAddress);
#else
CIRCDDB* ircDDB = new CIRCDDB(ircDDBHostname, 9007U, ircDDBUsername, ircDDBPassword, wxT("linux_") + LOG_BASE_NAME + wxT("-") + VERSION, gatewayAddress);
#endif
bool res = ircDDB->open();
if (!res) {
wxLogError(wxT("Cannot initialise the ircDDB protocol handler"));
ircDDBEnabled = false;
} else {
thread->setIRC(ircDDB);
}
}
if (ircDDBEnabled) {
wxString starNetBand1, starNetCallsign1, starNetLogoff1, starNetInfo1, starNetPermanent1, link1; // DEXTRA_LINK || DCS_LINK
unsigned int starNetUserTimeout1, starNetGroupTimeout1;
STARNET_CALLSIGN_SWITCH starNetCallsignSwitch1;
bool starNetTXMsgSwitch1;
m_config->getStarNet1(starNetBand1, starNetCallsign1, starNetLogoff1, starNetInfo1, starNetPermanent1, starNetUserTimeout1, starNetGroupTimeout1, starNetCallsignSwitch1, starNetTXMsgSwitch1
#if defined(DEXTRA_LINK) || defined(DCS_LINK)
,link1
#endif
);
if (!starNetCallsign1.IsEmpty() && !starNetCallsign1.IsSameAs(wxT(" "))) {
wxString repeater = gatewayCallsign;
repeater.Truncate(LONG_CALLSIGN_LENGTH - 1U);
repeater.Append(starNetBand1);
#if defined(DEXTRA_LINK) || defined(DCS_LINK)
thread->addStarNet(starNetCallsign1, starNetLogoff1, repeater, starNetInfo1, starNetPermanent1, starNetUserTimeout1, starNetGroupTimeout1, starNetCallsignSwitch1, starNetTXMsgSwitch1, link1);
wxLogInfo(wxT("STARnet group 1 set to %s/%s on repeater %s, info: \"%s\", permanent: %s, user: %u mins, group: %u mins, callsign switch: %d, tx msg switch: %d, reflector: %s"), starNetCallsign1.c_str(), starNetLogoff1.c_str(), repeater.c_str(), starNetInfo1.c_str(), starNetPermanent1.c_str(), starNetUserTimeout1, starNetGroupTimeout1, int(starNetCallsignSwitch1), int(starNetTXMsgSwitch1), link1.c_str());
#else
thread->addStarNet(starNetCallsign1, starNetLogoff1, repeater, starNetInfo1, starNetPermanent1, starNetUserTimeout1, starNetGroupTimeout1, starNetCallsignSwitch1, starNetTXMsgSwitch1);
wxLogInfo(wxT("STARnet group 1 set to %s/%s on repeater %s, info: \"%s\", permanent: %s, user: %u mins, group: %u mins, callsign switch: %d, tx msg switch: %d"), starNetCallsign1.c_str(), starNetLogoff1.c_str(), repeater.c_str(), starNetInfo1.c_str(), starNetPermanent1.c_str(), starNetUserTimeout1, starNetGroupTimeout1, int(starNetCallsignSwitch1), int(starNetTXMsgSwitch1));
#endif
}
wxString starNetBand2, starNetCallsign2, starNetLogoff2, starNetInfo2, starNetPermanent2, link2; // DEXTRA_LINK || DCS_LINK
unsigned int starNetUserTimeout2, starNetGroupTimeout2;
STARNET_CALLSIGN_SWITCH starNetCallsignSwitch2;
bool starNetTXMsgSwitch2;
m_config->getStarNet2(starNetBand2, starNetCallsign2, starNetLogoff2, starNetInfo2, starNetPermanent2, starNetUserTimeout2, starNetGroupTimeout2, starNetCallsignSwitch2, starNetTXMsgSwitch2
#if defined(DEXTRA_LINK) || defined(DCS_LINK)
,link2
#endif
);
if (!starNetCallsign2.IsEmpty() && !starNetCallsign2.IsSameAs(wxT(" "))) {
wxString repeater = gatewayCallsign;
repeater.Truncate(LONG_CALLSIGN_LENGTH - 1U);
repeater.Append(starNetBand2);
#if defined(DEXTRA_LINK) || defined(DCS_LINK)
thread->addStarNet(starNetCallsign2, starNetLogoff2, repeater, starNetInfo2, starNetPermanent2, starNetUserTimeout2, starNetGroupTimeout2, starNetCallsignSwitch2, starNetTXMsgSwitch2, link2);
wxLogInfo(wxT("STARnet group 2 set to %s/%s on repeater %s, info: \"%s\", permanent: %s, user: %u mins, group: %u mins, callsign switch: %d, tx msg switch: %d, reflector: %s"), starNetCallsign2.c_str(), starNetLogoff2.c_str(), repeater.c_str(), starNetInfo2.c_str(), starNetPermanent2.c_str(), starNetUserTimeout2, starNetGroupTimeout2, int(starNetCallsignSwitch2), int(starNetTXMsgSwitch2), link2.c_str());
#else
thread->addStarNet(starNetCallsign2, starNetLogoff2, repeater, starNetInfo2, starNetPermanent2, starNetUserTimeout2, starNetGroupTimeout2, starNetCallsignSwitch2, starNetTXMsgSwitch2);
wxLogInfo(wxT("STARnet group 2 set to %s/%s on repeater %s, info: \"%s\", permanent: %s, user: %u mins, group: %u mins, callsign switch: %d, tx msg switch: %d"), starNetCallsign2.c_str(), starNetLogoff2.c_str(), repeater.c_str(), starNetInfo2.c_str(), starNetPermanent2.c_str(), starNetUserTimeout2, starNetGroupTimeout2, int(starNetCallsignSwitch2), int(starNetTXMsgSwitch2));
#endif
}
wxString starNetBand3, starNetCallsign3, starNetLogoff3, starNetInfo3, starNetPermanent3, link3; // DEXTRA_LINK || DCS_LINK
unsigned int starNetUserTimeout3, starNetGroupTimeout3;
STARNET_CALLSIGN_SWITCH starNetCallsignSwitch3;
bool starNetTXMsgSwitch3;
m_config->getStarNet3(starNetBand3, starNetCallsign3, starNetLogoff3, starNetInfo3, starNetPermanent3, starNetUserTimeout3, starNetGroupTimeout3, starNetCallsignSwitch3, starNetTXMsgSwitch3
#if defined(DEXTRA_LINK) || defined(DCS_LINK)
,link3
#endif
);
if (!starNetCallsign3.IsEmpty() && !starNetCallsign3.IsSameAs(wxT(" "))) {
wxString repeater = gatewayCallsign;
repeater.Truncate(LONG_CALLSIGN_LENGTH - 1U);
repeater.Append(starNetBand3);
#if defined(DEXTRA_LINK) || defined(DCS_LINK)
thread->addStarNet(starNetCallsign3, starNetLogoff3, repeater, starNetInfo3, starNetPermanent3, starNetUserTimeout3, starNetGroupTimeout3, starNetCallsignSwitch3, starNetTXMsgSwitch3, link3);
wxLogInfo(wxT("STARnet group 3 set to %s/%s on repeater %s, info: \"%s\", permanent: %s, user: %u mins, group: %u mins, callsign switch: %d, tx msg switch: %d, reflector: %s"), starNetCallsign3.c_str(), starNetLogoff3.c_str(), repeater.c_str(), starNetInfo3.c_str(), starNetPermanent3.c_str(), starNetUserTimeout3, starNetGroupTimeout3, int(starNetCallsignSwitch3), int(starNetTXMsgSwitch3), link3.c_str());
#else
thread->addStarNet(starNetCallsign3, starNetLogoff3, repeater, starNetInfo3, starNetPermanent3, starNetUserTimeout3, starNetGroupTimeout3, starNetCallsignSwitch3, starNetTXMsgSwitch3);
wxLogInfo(wxT("STARnet group 3 set to %s/%s on repeater %s, info: \"%s\", permanent: %s, user: %u mins, group: %u mins, callsign switch: %d, tx msg switch: %d"), starNetCallsign3.c_str(), starNetLogoff3.c_str(), repeater.c_str(), starNetInfo3.c_str(), starNetPermanent3.c_str(), starNetUserTimeout3, starNetGroupTimeout3, int(starNetCallsignSwitch3), int(starNetTXMsgSwitch3));
#endif
}
wxString starNetBand4, starNetCallsign4, starNetLogoff4, starNetInfo4, starNetPermanent4, link4; // DEXTRA_LINK || DCS_LINK
unsigned int starNetUserTimeout4, starNetGroupTimeout4;
STARNET_CALLSIGN_SWITCH starNetCallsignSwitch4;
bool starNetTXMsgSwitch4;
m_config->getStarNet4(starNetBand4, starNetCallsign4, starNetLogoff4, starNetInfo4, starNetPermanent4, starNetUserTimeout4, starNetGroupTimeout4, starNetCallsignSwitch4, starNetTXMsgSwitch4
#if defined(DEXTRA_LINK) || defined(DCS_LINK)
,link4
#endif
);
if (!starNetCallsign4.IsEmpty() && !starNetCallsign4.IsSameAs(wxT(" "))) {
wxString repeater = gatewayCallsign;
repeater.Truncate(LONG_CALLSIGN_LENGTH - 1U);
repeater.Append(starNetBand4);
#if defined(DEXTRA_LINK) || defined(DCS_LINK)
thread->addStarNet(starNetCallsign4, starNetLogoff4, repeater, starNetInfo4, starNetPermanent4, starNetUserTimeout4, starNetGroupTimeout4, starNetCallsignSwitch4, starNetTXMsgSwitch4, link4);
wxLogInfo(wxT("STARnet group 4 set to %s/%s on repeater %s, info: \"%s\", permanent: %s, user: %u mins, group: %u mins, callsign switch: %d, tx msg switch: %d, reflector: %s"), starNetCallsign4.c_str(), starNetLogoff4.c_str(), repeater.c_str(), starNetInfo4.c_str(), starNetPermanent4.c_str(), starNetUserTimeout4, starNetGroupTimeout4, int(starNetCallsignSwitch4), int(starNetTXMsgSwitch4), link4.c_str());
#else
thread->addStarNet(starNetCallsign4, starNetLogoff4, repeater, starNetInfo4, starNetPermanent4, starNetUserTimeout4, starNetGroupTimeout4, starNetCallsignSwitch4, starNetTXMsgSwitch4);
wxLogInfo(wxT("STARnet group 4 set to %s/%s on repeater %s, info: \"%s\", permanent: %s, user: %u mins, group: %u mins, callsign switch: %d, tx msg switch: %d"), starNetCallsign4.c_str(), starNetLogoff4.c_str(), repeater.c_str(), starNetInfo4.c_str(), starNetPermanent4.c_str(), starNetUserTimeout4, starNetGroupTimeout4, int(starNetCallsignSwitch4), int(starNetTXMsgSwitch4));
#endif
}
wxString starNetBand5, starNetCallsign5, starNetLogoff5, starNetInfo5, starNetPermanent5, link5; // DEXTRA_LINK || DCS_LINK
unsigned int starNetUserTimeout5, starNetGroupTimeout5;
STARNET_CALLSIGN_SWITCH starNetCallsignSwitch5;
bool starNetTXMsgSwitch5;
m_config->getStarNet5(starNetBand5, starNetCallsign5, starNetLogoff5, starNetInfo5, starNetPermanent5, starNetUserTimeout5, starNetGroupTimeout5, starNetCallsignSwitch5, starNetTXMsgSwitch5
#if defined(DEXTRA_LINK) || defined(DCS_LINK)
,link5
#endif
);
if (!starNetCallsign5.IsEmpty() && !starNetCallsign5.IsSameAs(wxT(" "))) {
wxString repeater = gatewayCallsign;
repeater.Truncate(LONG_CALLSIGN_LENGTH - 1U);
repeater.Append(starNetBand5);
#if defined(DEXTRA_LINK) || defined(DCS_LINK)
thread->addStarNet(starNetCallsign5, starNetLogoff5, repeater, starNetInfo5, starNetPermanent5, starNetUserTimeout5, starNetGroupTimeout5, starNetCallsignSwitch5, starNetTXMsgSwitch5, link5);
wxLogInfo(wxT("STARnet group 5 set to %s/%s on repeater %s, info: \"%s\", permanent: %s, user: %u mins, group: %u mins, callsign switch: %d, tx msg switch: %d, reflector: %s"), starNetCallsign5.c_str(), starNetLogoff5.c_str(), repeater.c_str(), starNetInfo5.c_str(), starNetPermanent5.c_str(), starNetUserTimeout5, starNetGroupTimeout5, int(starNetCallsignSwitch5), int(starNetTXMsgSwitch5), link5.c_str());
#else
thread->addStarNet(starNetCallsign5, starNetLogoff5, repeater, starNetInfo5, starNetPermanent5, starNetUserTimeout5, starNetGroupTimeout5, starNetCallsignSwitch5, starNetTXMsgSwitch5);
wxLogInfo(wxT("STARnet group 5 set to %s/%s on repeater %s, info: \"%s\", permanent: %s, user: %u mins, group: %u mins, callsign switch: %d, tx msg switch: %d"), starNetCallsign5.c_str(), starNetLogoff5.c_str(), repeater.c_str(), starNetInfo5.c_str(), starNetPermanent5.c_str(), starNetUserTimeout5, starNetGroupTimeout5, int(starNetCallsignSwitch5), int(starNetTXMsgSwitch5));
#endif
}
}
bool dextraEnabled;
unsigned int dextraMaxDongles;
m_config->getDExtra(dextraEnabled, dextraMaxDongles);
wxLogInfo(wxT("DExtra enabled: %d, max. dongles: %u"), int(dextraEnabled), dextraMaxDongles);
bool remoteEnabled;
wxString remotePassword;
unsigned int remotePort;
m_config->getRemote(remoteEnabled, remotePassword, remotePort);
wxLogInfo(wxT("Remote enabled: %d, port: %u"), int(remoteEnabled), remotePort);
thread->setRemote(remoteEnabled, remotePassword, remotePort);
wxString dplusLogin;
unsigned int dplusMaxDongles;
bool dplusEnabled;
m_config->getDPlus(dplusEnabled, dplusMaxDongles, dplusLogin);
wxLogInfo(wxT("D-Plus enabled: %d, max. dongles; %u, login: %s"), int(dplusEnabled), dplusMaxDongles, dplusLogin.c_str());
bool dcsEnabled, ccsEnabled;
wxString ccsHost;
m_config->getDCS(dcsEnabled, ccsEnabled, ccsHost);
wxLogInfo(wxT("DCS enabled: %d, CCS enabled: %d, server: %s"), int(dcsEnabled), int(ccsEnabled), ccsHost.c_str());
if (repeaterBand1.Len() > 1U || repeaterBand2.Len() > 1U ||
repeaterBand3.Len() > 1U || repeaterBand4.Len() > 1U) {
wxLogInfo(wxT("DD mode enabled"));
thread->setDDModeEnabled(true);
}
wxFileName wlFilename(wxFileName::GetHomeDir(), WHITELIST_FILE_NAME);
bool exists = wlFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(wlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open the white list file - %s"), wlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the white list"), list->getCount());
thread->setWhiteList(list);
}
}
wxFileName blFilename(wxFileName::GetHomeDir(), BLACKLIST_FILE_NAME);
exists = blFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(blFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open the black list file - %s"), blFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the black list"), list->getCount());
thread->setBlackList(list);
}
}
wxFileName rlFilename(wxFileName::GetHomeDir(), RESTRICT_FILE_NAME);
exists = rlFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(rlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open the restrict list file - %s"), rlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the restrict list"), list->getCount());
thread->setRestrictList(list);
}
}
thread->setIcomRepeaterHandler(icomRepeaterHandler);
thread->setHBRepeaterHandler(hbRepeaterHandler);
thread->setDummyRepeaterHandler(dummyRepeaterHandler);
thread->setLanguage(language);
thread->setDPlus(dplusEnabled, dplusMaxDongles, dplusLogin);
thread->setDExtra(dextraEnabled, dextraMaxDongles);
thread->setDCS(dcsEnabled);
thread->setCCS(ccsEnabled, ccsHost);
thread->setInfoEnabled(infoEnabled);
thread->setEchoEnabled(echoEnabled);
thread->setDTMFEnabled(dtmfEnabled);
thread->setLog(logEnabled);
thread->setLocation(latitude, longitude);
// Convert the worker class into a thread
m_thread = new CIRCDDBGatewayThreadHelper(thread);
m_thread->start();
}
void CDStarRepeaterApp::createThread()
{
wxASSERT(m_config != NULL);
wxString callsign, gateway;
DSTAR_MODE mode;
ACK_TYPE ack;
bool restriction, rpt1Validation, dtmfBlanking, errorReply;
m_config->getCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation, dtmfBlanking, errorReply);
wxString modemType;
m_config->getModem(modemType);
// DVAP can only do simplex, force the mode accordingly
if (modemType.IsSameAs("DVAP")) {
if (mode == MODE_DUPLEX) {
wxLogInfo("DVAP: changing mode from DUPLEX to SIMPLEX");
mode = MODE_SIMPLEX;
} else if (mode == MODE_TXANDRX) {
wxLogInfo("DVAP: changing mode from TX_AND_RX to RX_ONLY");
mode = MODE_RXONLY;
}
}
// XXX This should be m_thread eventually.
switch (mode) {
case MODE_RXONLY:
m_thread = new CDStarRepeaterRXThread(modemType);
break;
case MODE_TXONLY:
m_thread = new CDStarRepeaterTXThread(modemType);
break;
case MODE_TXANDRX:
m_thread = new CDStarRepeaterTXRXThread(modemType);
break;
default:
m_thread = new CDStarRepeaterTRXThread(modemType);
break;
}
m_thread->setCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation, dtmfBlanking, errorReply);
wxLogInfo("Callsign set to \"%s\", gateway set to \"%s\", mode: %d, ack: %d, restriction: %d, RPT1 validation: %d, DTMF blanking: %d, Error reply: %d", callsign.c_str(), gateway.c_str(), int(mode), int(ack), int(restriction), int(rpt1Validation), int(dtmfBlanking), int(errorReply));
wxString gatewayAddress, localAddress, name;
unsigned int gatewayPort, localPort;
m_config->getNetwork(gatewayAddress, gatewayPort, localAddress, localPort, name);
wxLogInfo("Gateway set to %s:%u, local set to %s:%u, name set to \"%s\"", gatewayAddress.c_str(), gatewayPort, localAddress.c_str(), localPort, name.c_str());
if (!gatewayAddress.IsEmpty()) {
bool local = gatewayAddress.IsSameAs("127.0.0.1");
CRepeaterProtocolHandler* handler = new CRepeaterProtocolHandler(gatewayAddress, gatewayPort, localAddress, localPort, name);
bool res = handler->open();
if (!res)
wxLogError("Cannot open the protocol handler");
else
m_thread->setProtocolHandler(handler, local);
}
unsigned int timeout, ackTime;
m_config->getTimes(timeout, ackTime);
m_thread->setTimes(timeout, ackTime);
wxLogInfo("Timeout set to %u secs, ack time set to %u ms", timeout, ackTime);
unsigned int beaconTime;
wxString beaconText;
bool beaconVoice;
TEXT_LANG language;
m_config->getBeacon(beaconTime, beaconText, beaconVoice, language);
if (mode == MODE_GATEWAY)
beaconTime = 0U;
m_thread->setBeacon(beaconTime, beaconText, beaconVoice, language);
wxLogInfo("Beacon set to %u mins, text set to \"%s\", voice set to %d, language set to %d", beaconTime / 60U, beaconText.c_str(), int(beaconVoice), int(language));
bool announcementEnabled;
unsigned int announcementTime;
wxString announcementRecordRPT1, announcementRecordRPT2;
wxString announcementDeleteRPT1, announcementDeleteRPT2;
m_config->getAnnouncement(announcementEnabled, announcementTime, announcementRecordRPT1, announcementRecordRPT2, announcementDeleteRPT1, announcementDeleteRPT2);
if (mode == MODE_GATEWAY)
announcementEnabled = false;
m_thread->setAnnouncement(announcementEnabled, announcementTime, announcementRecordRPT1, announcementRecordRPT2, announcementDeleteRPT1, announcementDeleteRPT2);
wxLogInfo("Announcement enabled: %d, time: %u mins, record RPT1: \"%s\", record RPT2: \"%s\", delete RPT1: \"%s\", delete RPT2: \"%s\"", int(announcementEnabled), announcementTime / 60U, announcementRecordRPT1.c_str(), announcementRecordRPT2.c_str(), announcementDeleteRPT1.c_str(), announcementDeleteRPT2.c_str());
wxLogInfo("Modem type set to \"%s\"", modemType.c_str());
CModem* modem = NULL;
if (modemType.IsSameAs("DVAP")) {
wxString port;
unsigned int frequency;
int power, squelch;
m_config->getDVAP(port, frequency, power, squelch);
wxLogInfo("DVAP: port: %s, frequency: %u Hz, power: %d dBm, squelch: %d dBm", port.c_str(), frequency, power, squelch);
modem = new CDVAPController(port, frequency, power, squelch);
} else if (modemType.IsSameAs("DV-RPTR V1")) {
wxString port;
bool rxInvert, txInvert, channel;
unsigned int modLevel, txDelay;
m_config->getDVRPTR1(port, rxInvert, txInvert, channel, modLevel, txDelay);
wxLogInfo("DV-RPTR V1, port: %s, RX invert: %d, TX invert: %d, channel: %s, mod level: %u%%, TX delay: %u ms", port.c_str(), int(rxInvert), int(txInvert), channel ? "B" : "A", modLevel, txDelay);
modem = new CDVRPTRV1Controller(port, wxEmptyString, rxInvert, txInvert, channel, modLevel, txDelay);
} else if (modemType.IsSameAs("DV-RPTR V2")) {
CONNECTION_TYPE connType;
wxString usbPort, address;
bool txInvert;
unsigned int port, modLevel, txDelay;
m_config->getDVRPTR2(connType, usbPort, address, port, txInvert, modLevel, txDelay);
wxLogInfo("DV-RPTR V2, type: %d, address: %s:%u, TX invert: %d, mod level: %u%%, TX delay: %u ms", int(connType), address.c_str(), port, int(txInvert), modLevel, txDelay);
switch (connType) {
case CT_USB:
modem = new CDVRPTRV2Controller(usbPort, wxEmptyString, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
case CT_NETWORK:
modem = new CDVRPTRV2Controller(address, port, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
}
} else if (modemType.IsSameAs("DV-RPTR V3")) {
CONNECTION_TYPE connType;
wxString usbPort, address;
bool txInvert;
unsigned int port, modLevel, txDelay;
m_config->getDVRPTR3(connType, usbPort, address, port, txInvert, modLevel, txDelay);
wxLogInfo("DV-RPTR V3, type: %d, address: %s:%u, TX invert: %d, mod level: %u%%, TX delay: %u ms", int(connType), address.c_str(), port, int(txInvert), modLevel, txDelay);
switch (connType) {
case CT_USB:
modem = new CDVRPTRV3Controller(usbPort, wxEmptyString, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
case CT_NETWORK:
modem = new CDVRPTRV3Controller(address, port, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
}
} else if (modemType.IsSameAs("DVMEGA")) {
wxString port;
DVMEGA_VARIANT variant;
bool rxInvert, txInvert;
unsigned int txDelay, rxFrequency, txFrequency, power;
m_config->getDVMEGA(port, variant, rxInvert, txInvert, txDelay, rxFrequency, txFrequency, power);
wxLogInfo("DVMEGA, port: %s, variant: %d, RX invert: %d, TX invert: %d, TX delay: %u ms, rx frequency: %u Hz, tx frequency: %u Hz, power: %u %%", port.c_str(), int(variant), int(rxInvert), int(txInvert), txDelay, rxFrequency, txFrequency, power);
switch (variant) {
case DVMV_MODEM:
modem = new CDVMegaController(port, wxEmptyString, rxInvert, txInvert, txDelay);
break;
case DVMV_RADIO_2M:
case DVMV_RADIO_70CM:
case DVMV_RADIO_2M_70CM:
modem = new CDVMegaController(port, wxEmptyString, txDelay, rxFrequency, txFrequency, power);
break;
default:
wxLogError("Unknown DVMEGA variant - %d"), int(variant);
break;
}
} else if (modemType.IsSameAs("GMSK Modem")) {
USB_INTERFACE iface;
unsigned int address;
m_config->getGMSK(iface, address);
wxLogInfo("GMSK, interface: %d, address: %04X", int(iface), address);
modem = new CGMSKController(iface, address, mode == MODE_DUPLEX || mode == MODE_TXANDRX);
} else if (modemType.IsSameAs("Sound Card")) {
wxString rxDevice, txDevice;
bool rxInvert, txInvert;
wxFloat32 rxLevel, txLevel;
unsigned int txDelay, txTail;
m_config->getSoundCard(rxDevice, txDevice, rxInvert, txInvert, rxLevel, txLevel, txDelay, txTail);
wxLogInfo("Sound Card, devices: %s:%s, invert: %d:%d, levels: %.2f:%.2f, tx delay: %u ms, tx tail: %u ms", rxDevice.c_str(), txDevice.c_str(), int(rxInvert), int(txInvert), rxLevel, txLevel, txDelay, txTail);
modem = new CSoundCardController(rxDevice, txDevice, rxInvert, txInvert, rxLevel, txLevel, txDelay, txTail);
} else if (modemType.IsSameAs("MMDVM")) {
wxString port;
bool rxInvert, txInvert, pttInvert;
unsigned int txDelay, rxLevel, txLevel;
m_config->getMMDVM(port, rxInvert, txInvert, pttInvert, txDelay, rxLevel, txLevel);
wxLogInfo("MMDVM, port: %s, RX invert: %d, TX invert: %d, PTT invert: %d, TX delay: %u ms, RX level: %u%%, TX level: %u%%", port.c_str(), int(rxInvert), int(txInvert), int(pttInvert), txDelay, rxLevel, txLevel);
modem = new CMMDVMController(port, wxEmptyString, rxInvert, txInvert, pttInvert, txDelay, rxLevel, txLevel);
} else if (modemType.IsSameAs("Split")) {
wxString localAddress;
unsigned int localPort;
wxArrayString transmitterNames, receiverNames;
unsigned int timeout;
m_config->getSplit(localAddress, localPort, transmitterNames, receiverNames, timeout);
wxLogInfo("Split, local: %s:%u, timeout: %u ms", localAddress.c_str(), localPort, timeout);
for (unsigned int i = 0U; i < transmitterNames.GetCount(); i++) {
wxString name = transmitterNames.Item(i);
if (!name.IsEmpty())
wxLogInfo("\tTX %u name: %s", i + 1U, name.c_str());
}
for (unsigned int i = 0U; i < receiverNames.GetCount(); i++) {
wxString name = receiverNames.Item(i);
if (!name.IsEmpty())
wxLogInfo("\tRX %u name: %s", i + 1U, name.c_str());
}
modem = new CSplitController(localAddress, localPort, transmitterNames, receiverNames, timeout);
} else {
wxLogError("Unknown modem type: %s", modemType.c_str());
}
if (modem != NULL) {
bool res = modem->start();
if (!res)
wxLogError("Cannot open the D-Star modem");
else
m_thread->setModem(modem);
}
wxString controllerType;
unsigned int portConfig, activeHangTime;
bool pttInvert;
m_config->getController(controllerType, portConfig, pttInvert, activeHangTime);
wxLogInfo("Controller set to %s, config: %u, PTT invert: %d, active hang time: %u ms", controllerType.c_str(), portConfig, int(pttInvert), activeHangTime);
CExternalController* controller = NULL;
wxString port;
if (controllerType.StartsWith("Velleman K8055 - ", &port)) {
unsigned long num;
port.ToULong(&num);
controller = new CExternalController(new CK8055Controller(num), pttInvert);
} else if (controllerType.StartsWith("URI USB - ", &port)) {
unsigned long num;
port.ToULong(&num);
controller = new CExternalController(new CURIUSBController(num, true), pttInvert);
} else if (controllerType.StartsWith("Serial - ", &port)) {
controller = new CExternalController(new CSerialLineController(port, portConfig), pttInvert);
} else if (controllerType.StartsWith("Arduino - ", &port)) {
controller = new CExternalController(new CArduinoController(port), pttInvert);
#if defined(GPIO)
} else if (controllerType.IsSameAs("GPIO")) {
controller = new CExternalController(new CGPIOController(portConfig), pttInvert);
} else if (controllerType.IsSameAs(wxT("UDRC"))) {
switch(portConfig) {
case 1:
controller = new CUDRCController(AUTO_FM);
break;
case 3:
controller = new CUDRCController(DIGITAL_DIGITAL);
break;
case 4:
controller = new CUDRCController(FM_FM);
break;
case 5:
controller = new CUDRCController(HOTSPOT);
break;
default:
case 2:
controller = new CUDRCController(AUTO_AUTO);
break;
}
#endif
} else {
wxLogError("Unrecognized controller %s, using dummy controller", controllerType);
controller = new CExternalController(new CDummyController, pttInvert);
}
bool res = controller->open();
if (!res)
wxLogError("Cannot open the hardware interface - %s", controllerType.c_str());
else
m_thread->setController(controller, activeHangTime);
bool out1, out2, out3, out4;
m_config->getOutputs(out1, out2, out3, out4);
m_thread->setOutputs(out1, out2, out3, out4);
#if (wxUSE_GUI == 1)
m_frame->setOutputs(out1, out2, out3, out4);
#endif
wxLogInfo("Output 1 = %d, output 2 = %d, output 3 = %d, output 4 = %d", int(out1), int(out2), int(out3), int(out4));
bool enabled;
wxString rpt1Callsign, rpt2Callsign;
wxString shutdown, startup;
// XXX Initialization should be temporary until we get them coming
// from m_config->getControl
wxArrayString status;
status.Add("", 5);
wxArrayString command;
command.Add("", 6);
wxArrayString output;
output.Add("", 4);
m_config->getControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status[0], status[1], status[2], status[3], status[4], command[0], m_commandLine[0], command[1], m_commandLine[1], command[2], m_commandLine[2], command[3], m_commandLine[3], command[4], m_commandLine[4], command[5], m_commandLine[5], output[0], output[1], output[2], output[3]);
m_thread->setControl(enabled, rpt1Callsign, rpt2Callsign, shutdown,
startup, command, status, output);
wxLogInfo(wxT("Control: enabled: %d, RPT1: %s, RPT2: %s, shutdown: %s, startup: %s, status1: %s, status2: %s, status3: %s, status4: %s, status5: %s, command1: %s = %s, command2: %s = %s, command3: %s = %s, command4: %s = %s, command5: %s = %s, command6: %s = %s, output1: %s, output2: %s, output3: %s, output4: %s"), enabled, rpt1Callsign.c_str(), rpt2Callsign.c_str(), shutdown.c_str(), startup.c_str(), status[0].c_str(), status[1].c_str(), status[2].c_str(), status[3].c_str(), status[4].c_str(), command[0].c_str(), m_commandLine[0].c_str(), command[1].c_str(), m_commandLine[1].c_str(), command[2].c_str(), m_commandLine[2].c_str(), command[3].c_str(), m_commandLine[3].c_str(), command[4].c_str(), m_commandLine[4].c_str(), command[5].c_str(), m_commandLine[5].c_str(), output[0].c_str(), output[1].c_str(), output[2].c_str(), output[3].c_str());
bool logging;
m_config->getLogging(logging);
m_thread->setLogging(logging, m_audioDir);
#if (wxUSE_GUI == 1)
m_frame->setLogging(logging);
#endif
wxLogInfo("Frame logging set to %d, in %s", int(logging), m_audioDir.c_str());
#if defined(__WINDOWS__)
wxFileName wlFilename(wxFileName::GetHomeDir(), PRIMARY_WHITELIST_FILE_NAME);
#else
wxFileName wlFilename(CONF_DIR, PRIMARY_WHITELIST_FILE_NAME);
#endif
bool exists = wlFilename.FileExists();
if (!exists) {
#if defined(__WINDOWS__)
wlFilename.Assign(wxFileName::GetHomeDir(), SECONDARY_WHITELIST_FILE_NAME);
#else
wlFilename.Assign(CONF_DIR, SECONDARY_WHITELIST_FILE_NAME);
#endif
exists = wlFilename.FileExists();
}
if (exists) {
CCallsignList* list = new CCallsignList(wlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError("Unable to open white list file - %s", wlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo("%u callsigns loaded into the white list", list->getCount());
m_thread->setWhiteList(list);
}
}
#if defined(__WINDOWS__)
wxFileName blFilename(wxFileName::GetHomeDir(), PRIMARY_BLACKLIST_FILE_NAME);
#else
wxFileName blFilename(CONF_DIR, PRIMARY_BLACKLIST_FILE_NAME);
#endif
exists = blFilename.FileExists();
if (!exists) {
#if defined(__WINDOWS__)
blFilename.Assign(wxFileName::GetHomeDir(), SECONDARY_BLACKLIST_FILE_NAME);
#else
blFilename.Assign(CONF_DIR, SECONDARY_BLACKLIST_FILE_NAME);
#endif
exists = blFilename.FileExists();
}
if (exists) {
CCallsignList* list = new CCallsignList(blFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError("Unable to open black list file - %s", blFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo("%u callsigns loaded into the black list", list->getCount());
m_thread->setBlackList(list);
}
}
#if defined(__WINDOWS__)
wxFileName glFilename(wxFileName::GetHomeDir(), GREYLIST_FILE_NAME);
#else
wxFileName glFilename(CONF_DIR, GREYLIST_FILE_NAME);
#endif
exists = glFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(glFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError("Unable to open grey list file - %s", glFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo("%u callsigns loaded into the grey list", list->getCount());
m_thread->setGreyList(list);
}
}
m_thread->Create();
m_thread->SetPriority(wxPRIORITY_MAX);
m_thread->Run();
}
void CSoundCardRepeaterApp::createThread()
{
wxString callsign, gateway;
DSTAR_MODE mode;
ACK_TYPE ack;
bool restriction, rpt1Validation;
getCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
switch (mode) {
case MODE_RXONLY:
m_thread = new CSoundCardRepeaterRXThread;
break;
case MODE_TXONLY:
m_thread = new CSoundCardRepeaterTXThread;
break;
case MODE_TXANDRX:
m_thread = new CSoundCardRepeaterTXRXThread;
break;
default:
m_thread = new CSoundCardRepeaterTRXThread;
break;
}
m_thread->setCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation);
wxLogInfo(wxT("Callsign set to \"%s\", gateway set to \"%s\", mode: %d, ack: %d, restriction: %d, RPT1 validation: %d"), callsign.c_str(), gateway.c_str(), int(mode), int(ack), restriction, rpt1Validation);
wxString gatewayAddress, localAddress;
unsigned int gatewayPort, localPort;
getNetwork(gatewayAddress, gatewayPort, localAddress, localPort);
wxLogInfo(wxT("Gateway set to %s:%u, local set to %s:%u"), gatewayAddress.c_str(), gatewayPort, localAddress.c_str(), localPort);
if (!gatewayAddress.IsEmpty()) {
CRepeaterProtocolHandler* handler = new CRepeaterProtocolHandler(gatewayAddress, gatewayPort, localAddress, localPort);
bool res = handler->open();
if (!res)
wxLogError(wxT("Cannot open the protocol handler"));
else
m_thread->setProtocolHandler(handler);
}
unsigned int timeout, ackTime, hangTime;
getTimes(timeout, ackTime, hangTime);
m_thread->setTimes(timeout, ackTime, hangTime);
wxLogInfo(wxT("Timeout set to %u secs, Ack time set to %u ms, Hang time set to %u ms"), timeout, ackTime, hangTime);
unsigned int beaconTime;
wxString beaconText;
bool beaconVoice;
TEXT_LANG language;
getBeacon(beaconTime, beaconText, beaconVoice, language);
m_thread->setBeacon(beaconTime, beaconText, beaconVoice, language);
wxLogInfo(wxT("Beacon set to %u mins, text set to \"%s\", voice set to %d, language set to %d"), beaconTime / 60U, beaconText.c_str(), int(beaconVoice), int(language));
wxString readDevice, writeDevice;
bool rxInvert, txInvert;
wxFloat32 rxLevel, txLevel, squelchLevel;
SQUELCH_MODE squelchMode;
getRadio(readDevice, writeDevice, rxLevel, txLevel, squelchMode, squelchLevel, rxInvert, txInvert);
wxLogInfo(wxT("Soundcard set to %s:%s, levels: %.2f:%.2f, GMSK Inversion set to %d:%d, squelch: mode: %d level: %.2f"), readDevice.c_str(), writeDevice.c_str(), rxLevel, txLevel, rxInvert, txInvert, int(squelchMode), squelchLevel);
if (!readDevice.IsEmpty() && !writeDevice.IsEmpty()) {
#if defined(__WINDOWS__)
CSoundCardReaderWriter* soundcard = new CSoundCardReaderWriter(readDevice, writeDevice, DSTAR_RADIO_SAMPLE_RATE, DSTAR_RADIO_BLOCK_SIZE);
#else
CSoundCardReaderWriter* soundcard = new CSoundCardReaderWriter(readDevice, writeDevice, DSTAR_RADIO_SAMPLE_RATE, 64U);
#endif
soundcard->setCallback(m_thread, 0U);
bool res = soundcard->open();
if (!res)
wxLogError(wxT("Cannot open the sound card"));
else
m_thread->setSoundCard(soundcard, rxLevel, txLevel, squelchMode, squelchLevel, rxInvert, txInvert);
}
wxString type;
unsigned int cfg;
int pttDelay;
bool pttInvert;
getController(type, cfg, pttDelay, pttInvert);
wxLogInfo(wxT("Controller set to %s, config: %u, ptt delay: %d ms, PTT Inversion set to %d"), type.c_str(), cfg, pttDelay * 20, pttInvert);
CExternalController* controller = NULL;
wxString port;
if (type.StartsWith(wxT("Velleman K8055 - "), &port)) {
unsigned long num;
port.ToULong(&num);
controller = new CExternalController(new CK8055Controller(num), pttInvert, false);
} else if (type.StartsWith(wxT("URI USB - "), &port)) {
unsigned long num;
port.ToULong(&num);
controller = new CExternalController(new CURIUSBController(num, false), pttInvert, false);
} else if (type.StartsWith(wxT("Serial - "), &port)) {
controller = new CExternalController(new CSerialController(port, cfg), pttInvert, false);
} else {
controller = new CExternalController(new CDummyController, pttInvert, false);
}
bool res = controller->open();
if (!res)
wxLogError(wxT("Cannot open the hardware interface - %s"), type.c_str());
else
m_thread->setController(controller, pttDelay);
bool out1, out2, out3, out4;
getOutputs(out1, out2, out3, out4);
m_thread->setOutputs(out1, out2, out3, out4);
m_frame->setOutputs(out1, out2, out3, out4);
wxLogInfo(wxT("Output 1 = %d, output 2 = %d, output 3 = %d, output 4 = %d"), out1, out2, out3, out4);
bool enabled;
wxString rpt1Callsign, rpt2Callsign;
wxString shutdown, startup;
wxString status1, status2, status3, status4, status5;
wxString command1, command1Line, command2, command2Line;
wxString command3, command3Line, command4, command4Line;
wxString output1, output2, output3, output4;
getControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, output1, output2, output3, output4);
m_thread->setControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, output1, output2, output3, output4);
wxLogInfo(wxT("Control: enabled: %d, RPT1: %s, RPT2: %s, shutdown: %s, startup: %s, status1: %s, status2: %s, status3: %s, status4: %s, status5: %s, command1: %s = %s, command2: %s = %s, command3: %s = %s, command4: %s = %s, output1: %s, output2: %s, output3: %s, output4: %s"), enabled, rpt1Callsign.c_str(), rpt2Callsign.c_str(), shutdown.c_str(), startup.c_str(), status1.c_str(), status2.c_str(), status3.c_str(), status4.c_str(), status5.c_str(), command1.c_str(), command1Line.c_str(), command2.c_str(), command2Line.c_str(), command1.c_str(), command1Line.c_str(), command2.c_str(), command2Line.c_str(), command3.c_str(), command3Line.c_str(), command4.c_str(), command4Line.c_str(), output1.c_str(), output2.c_str(), output3.c_str(), output4.c_str());
unsigned int activeHangTime;
getActiveHang(activeHangTime);
m_thread->setActiveHang(activeHangTime);
wxLogInfo(wxT("Active Hang: time: %u"), activeHangTime);
bool logging;
getLogging(logging);
m_thread->setLogging(logging, ::wxGetHomeDir());
m_frame->setLogging(logging);
wxLogInfo(wxT("Frame logging set to %d, in %s"), int(logging), ::wxGetHomeDir().c_str());
wxFileName wlFilename(wxFileName::GetHomeDir(), WHITELIST_FILE_NAME);
bool exists = wlFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(wlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open white list file - %s"), wlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the white list"), list->getCount());
m_thread->setWhiteList(list);
}
}
wxFileName blFilename(wxFileName::GetHomeDir(), BLACKLIST_FILE_NAME);
exists = blFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(blFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open black list file - %s"), blFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the black list"), list->getCount());
m_thread->setBlackList(list);
}
}
m_thread->start();
}
