void
bletest_execute_initiator(void)
{
int rc;
uint16_t handle;
/*
* Determine if there is an active connection for the current handle
* we are trying to create. If so, start looking for the next one
*/
if (g_bletest_current_conns < BLETEST_CFG_CONCURRENT_CONNS) {
handle = g_bletest_current_conns + 1;
if (ble_ll_conn_find_active_conn(handle)) {
/* Set LED to slower blink rate */
g_bletest_led_rate = OS_TICKS_PER_SEC;
/* Set next os time to start the connection update */
g_next_os_time = 0;
/* Ask for version information */
rc = host_hci_cmd_rd_rem_version(handle);
assert(rc == 0);
host_hci_outstanding_opcode = 0;
/* Scanning better be stopped! */
assert(ble_ll_scan_enabled() == 0);
/* Add to current connections */
++g_bletest_current_conns;
/* Move to next connection */
if (g_bletest_current_conns < BLETEST_CFG_CONCURRENT_CONNS) {
/* restart initiating */
g_bletest_cur_peer_addr[5] += 1;
g_dev_addr[5] += 1;
bletest_init_initiator();
}
}
} else {
/* Issue a connection parameter update to connection handle 1 */
if (g_next_os_time == 0) {
g_next_os_time = os_time_get();
g_next_os_time += OS_TICKS_PER_SEC * 5;
} else {
if (g_next_os_time != 0xffffffff) {
#if 0
if ((int32_t)(os_time_get() - g_next_os_time) >= 0) {
bletest_send_conn_update(1);
g_next_os_time = 0xffffffff;
}
#else
g_next_os_time = 0xffffffff;
#endif
}
}
}
}
static void
bletest_execute_advertiser(void)
{
int i,j;
int rc;
uint16_t handle;
uint16_t pktlen;
struct os_mbuf *om;
/* See if we should start advertising again */
if (g_bletest_current_conns < BLETEST_CFG_CONCURRENT_CONNS) {
handle = g_bletest_current_conns + 1;
if (ble_ll_conn_find_active_conn(handle)) {
/* Set LED to slower blink rate */
g_bletest_led_rate = OS_TICKS_PER_SEC;
/* advertising better be stopped! */
assert(ble_ll_adv_enabled() == 0);
/* Send the remote used features command */
rc = host_hci_cmd_le_read_rem_used_feat(handle);
host_hci_outstanding_opcode = 0;
assert(rc == 0);
/* Send the remote used features command */
rc = host_hci_cmd_rd_rem_version(handle);
host_hci_outstanding_opcode = 0;
assert(rc == 0);
/* set conn update time */
g_bletest_conn_upd_time = os_time_get() + (OS_TICKS_PER_SEC * 5);
g_bletest_start_update = 1;
/* Add to current connections */
++g_bletest_current_conns;
/* Move to next connection */
if (g_bletest_current_conns < BLETEST_CFG_CONCURRENT_CONNS) {
/* restart initiating */
g_bletest_cur_peer_addr[5] += 1;
g_dev_addr[5] += 1;
bletest_init_advertising();
rc = host_hci_cmd_le_set_adv_enable(1);
host_hci_outstanding_opcode = 0;
assert(rc == 0);
}
}
}
#if 0
if (g_bletest_start_update) {
if ((int32_t)(os_time_get() - g_bletest_conn_upd_time) >= 0) {
bletest_send_conn_update(1);
g_bletest_start_update = 0;
}
}
#endif
/* See if it is time to hand a data packet to the connection */
if ((int32_t)(os_time_get() - g_next_os_time) >= 0) {
if (g_bletest_current_conns) {
for (i = 0; i < g_bletest_current_conns; ++i) {
if ((g_last_handle_used == 0) ||
(g_last_handle_used > g_bletest_current_conns)) {
g_last_handle_used = 1;
}
handle = g_last_handle_used;
if (ble_ll_conn_find_active_conn(handle)) {
om = bletest_get_packet();
if (om) {
/* set payload length */
pktlen = BLETEST_PKT_SIZE;
om->om_len = BLETEST_PKT_SIZE + 4;
/* Put the HCI header in the mbuf */
htole16(om->om_data, handle);
htole16(om->om_data + 2, om->om_len);
/* Place L2CAP header in packet */
htole16(om->om_data + 4, pktlen);
om->om_data[6] = 0;
om->om_data[7] = 0;
/* Fill with incrementing pattern (starting from 1) */
for (j = 0; j < pktlen; ++j) {
om->om_data[8 + j] = (uint8_t)(j + 1);
}
/* Add length */
om->om_len += 4;
OS_MBUF_PKTHDR(om)->omp_len = om->om_len;
ble_hci_transport_host_acl_data_send(om);
/* Increment last handle used */
++g_last_handle_used;
}
}
}
}
g_next_os_time += OS_TICKS_PER_SEC;
}
}
static void
bletest_execute_advertiser(void)
{
int i;
#if (BLETEST_CONCURRENT_CONN_TEST == 1)
#if (MYNEWT_VAL(BLE_LL_CFG_FEAT_LE_ENCRYPTION) == 1)
uint16_t mask;
uint16_t reply_handle;
#endif
#endif
int rc;
uint16_t handle;
struct os_mbuf *om;
#if (BLETEST_THROUGHPUT_TEST == 1)
os_sr_t sr;
uint16_t completed_pkts;
#endif
/* See if we should start advertising again */
if (g_bletest_current_conns < BLETEST_CFG_CONCURRENT_CONNS) {
handle = g_bletest_current_conns + 1;
if (ble_ll_conn_find_active_conn(handle)) {
/* Set LED to slower blink rate */
g_bletest_led_rate = OS_TICKS_PER_SEC;
#if (BLETEST_THROUGHPUT_TEST == 1)
/* Set next os time to 10 seconds after 1st connection */
if (g_next_os_time == 0) {
g_next_os_time = os_time_get() + (10 * OS_TICKS_PER_SEC);
g_bletest_handle = handle;
}
#endif
/* advertising better be stopped! */
assert(ble_ll_adv_enabled() == 0);
/* Send the remote used features command */
rc = bletest_hci_le_read_rem_used_feat(handle);
if (rc) {
return;
}
/* Send the remote read version command */
rc = bletest_hci_rd_rem_version(handle);
if (rc) {
return;
}
/* set conn update time */
g_bletest_conn_upd_time = os_time_get() + (OS_TICKS_PER_SEC * 5);
g_bletest_start_update = 1;
/* Add to current connections */
++g_bletest_current_conns;
/* Move to next connection */
if (g_bletest_current_conns < BLETEST_CFG_CONCURRENT_CONNS) {
/* restart initiating */
g_bletest_cur_peer_addr[5] += 1;
g_dev_addr[5] += 1;
#if MYNEWT_VAL(BLE_ANDROID_MULTI_ADV_SUPPORT)
bletest_init_advertising(0,0);
bletest_hci_le_set_multi_adv_enable(1, 0);
#else
bletest_init_advertising();
bletest_hci_le_set_adv_enable(1);
#endif
}
} else {
/* If we failed to start advertising we should keep trying */
if (ble_ll_adv_enabled() == 0) {
#if MYNEWT_VAL(BLE_ANDROID_MULTI_ADV_SUPPORT)
bletest_hci_le_set_multi_adv_enable(1, 0);
#else
bletest_hci_le_set_adv_enable(1);
#endif
}
}
}
#if 0
if (g_bletest_start_update) {
if ((int32_t)(os_time_get() - g_bletest_conn_upd_time) >= 0) {
bletest_send_conn_update(1);
g_bletest_start_update = 0;
}
}
#endif
#if (BLETEST_CONCURRENT_CONN_TEST == 1)
/* See if it is time to hand a data packet to the connection */
if ((int32_t)(os_time_get() - g_next_os_time) >= 0) {
#if (MYNEWT_VAL(BLE_LL_CFG_FEAT_LE_ENCRYPTION) == 1)
/* Do we need to send a LTK reply? */
mask = 1;
reply_handle = 1;
while (g_bletest_ltk_reply_handle && mask) {
if (g_bletest_ltk_reply_handle & mask) {
bletest_send_ltk_req_reply(reply_handle);
//bletest_send_ltk_req_neg_reply(reply_handle);
g_bletest_ltk_reply_handle &= ~mask;
}
++reply_handle;
mask <<= 1;
}
#endif
if (g_bletest_current_conns) {
for (i = 0; i < g_bletest_current_conns; ++i) {
if ((g_last_handle_used == 0) ||
(g_last_handle_used > g_bletest_current_conns)) {
g_last_handle_used = 1;
}
handle = g_last_handle_used;
if (ble_ll_conn_find_active_conn(handle)) {
om = bletest_send_packet(handle);
if (om) {
/* Increment last handle used */
++g_last_handle_used;
}
} else {
++g_last_handle_used;
}
}
}
g_next_os_time = os_time_get() + OS_TICKS_PER_SEC;
}
#endif
#if (BLETEST_THROUGHPUT_TEST == 1)
/* Nothing to do if no connections */
if (!g_bletest_current_conns) {
return;
}
/* See if it is time to start throughput testing */
if ((int32_t)(os_time_get() - g_next_os_time) >= 0) {
/* Keep window full */
OS_ENTER_CRITICAL(sr);
completed_pkts = g_bletest_completed_pkts;
g_bletest_completed_pkts = 0;
OS_EXIT_CRITICAL(sr);
assert(g_bletest_outstanding_pkts >= completed_pkts);
g_bletest_outstanding_pkts -= completed_pkts;
while (g_bletest_outstanding_pkts < 20) {
om = bletest_send_packet(g_bletest_handle);
if (om) {
++g_bletest_outstanding_pkts;
}
}
}
#endif /* XXX: throughput test */
}
