static struct request *get_alua_req(struct scsi_device *sdev,
void *buffer, unsigned buflen, int rw)
{
struct request *rq;
struct request_queue *q = sdev->request_queue;
rq = blk_get_request(q, rw, GFP_NOIO);
if (IS_ERR(rq)) {
sdev_printk(KERN_INFO, sdev,
"%s: blk_get_request failed\n", __func__);
return NULL;
}
blk_rq_set_block_pc(rq);
if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) {
blk_put_request(rq);
sdev_printk(KERN_INFO, sdev,
"%s: blk_rq_map_kern failed\n", __func__);
return NULL;
}
rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
REQ_FAILFAST_DRIVER;
rq->retries = ALUA_FAILOVER_RETRIES;
rq->timeout = ALUA_FAILOVER_TIMEOUT * HZ;
return rq;
}
/*
* Get block request for REQ_BLOCK_PC command issued to path. Currently
* limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
*
* Uses data and sense buffers in hardware handler context structure and
* assumes serial servicing of commands, both issuance and completion.
*/
static struct request *get_req(struct scsi_device *sdev, int cmd,
unsigned char *buffer)
{
struct request *rq;
int len = 0;
rq = blk_get_request(sdev->request_queue,
(cmd != INQUIRY) ? WRITE : READ, GFP_NOIO);
if (IS_ERR(rq)) {
sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed");
return NULL;
}
blk_rq_set_block_pc(rq);
rq->cmd_len = COMMAND_SIZE(cmd);
rq->cmd[0] = cmd;
switch (cmd) {
case MODE_SELECT:
len = sizeof(short_trespass);
rq->cmd[1] = 0x10;
rq->cmd[4] = len;
break;
case MODE_SELECT_10:
len = sizeof(long_trespass);
rq->cmd[1] = 0x10;
rq->cmd[8] = len;
break;
case INQUIRY:
len = CLARIION_BUFFER_SIZE;
rq->cmd[4] = len;
memset(buffer, 0, len);
break;
default:
BUG_ON(1);
break;
}
rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
REQ_FAILFAST_DRIVER;
rq->timeout = CLARIION_TIMEOUT;
rq->retries = CLARIION_RETRIES;
if (blk_rq_map_kern(rq->q, rq, buffer, len, GFP_NOIO)) {
blk_put_request(rq);
return NULL;
}
return rq;
}
/*
* hp_sw_tur - Send TEST UNIT READY
* @sdev: sdev command should be sent to
*
* Use the TEST UNIT READY command to determine
* the path state.
*/
static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
{
struct request *req;
int ret;
retry:
req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
if (IS_ERR(req))
return SCSI_DH_RES_TEMP_UNAVAIL;
blk_rq_set_block_pc(req);
req->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
REQ_FAILFAST_DRIVER;
req->cmd_len = COMMAND_SIZE(TEST_UNIT_READY);
req->cmd[0] = TEST_UNIT_READY;
req->timeout = HP_SW_TIMEOUT;
req->sense = h->sense;
memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
req->sense_len = 0;
ret = blk_execute_rq(req->q, NULL, req, 1);
if (ret == -EIO) {
if (req->sense_len > 0) {
ret = tur_done(sdev, h->sense);
} else {
sdev_printk(KERN_WARNING, sdev,
"%s: sending tur failed with %x\n",
HP_SW_NAME, req->errors);
ret = SCSI_DH_IO;
}
} else {
h->path_state = HP_SW_PATH_ACTIVE;
ret = SCSI_DH_OK;
}
if (ret == SCSI_DH_IMM_RETRY) {
blk_put_request(req);
goto retry;
}
if (ret == SCSI_DH_DEV_OFFLINED) {
h->path_state = HP_SW_PATH_PASSIVE;
ret = SCSI_DH_OK;
}
blk_put_request(req);
return ret;
}
/* Send basic block requests */
static int __blk_send_generic(struct request_queue *q, struct gendisk *bd_disk,
int cmd, int data)
{
struct request *rq;
int err;
rq = blk_get_request(q, WRITE, __GFP_RECLAIM);
if (IS_ERR(rq))
return PTR_ERR(rq);
blk_rq_set_block_pc(rq);
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
rq->cmd[0] = cmd;
rq->cmd[4] = data;
rq->cmd_len = 6;
err = blk_execute_rq(q, bd_disk, rq, 0);
blk_put_request(rq);
return err;
}
/*
* hp_sw_start_stop - Send START STOP UNIT command
* @sdev: sdev command should be sent to
*
* Sending START STOP UNIT activates the SP.
*/
static int hp_sw_start_stop(struct hp_sw_dh_data *h)
{
struct request *req;
req = blk_get_request(h->sdev->request_queue, WRITE, GFP_ATOMIC);
if (IS_ERR(req))
return SCSI_DH_RES_TEMP_UNAVAIL;
blk_rq_set_block_pc(req);
req->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
REQ_FAILFAST_DRIVER;
req->cmd_len = COMMAND_SIZE(START_STOP);
req->cmd[0] = START_STOP;
req->cmd[4] = 1; /* Start spin cycle */
req->timeout = HP_SW_TIMEOUT;
req->sense = h->sense;
memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
req->sense_len = 0;
req->end_io_data = h;
blk_execute_rq_nowait(req->q, NULL, req, 1, start_stop_endio);
return SCSI_DH_OK;
}
/**
* sg_scsi_ioctl -- handle deprecated SCSI_IOCTL_SEND_COMMAND ioctl
* @file: file this ioctl operates on (optional)
* @q: request queue to send scsi commands down
* @disk: gendisk to operate on (option)
* @sic: userspace structure describing the command to perform
*
* Send down the scsi command described by @sic to the device below
* the request queue @q. If @file is non-NULL it's used to perform
* fine-grained permission checks that allow users to send down
* non-destructive SCSI commands. If the caller has a struct gendisk
* available it should be passed in as @disk to allow the low level
* driver to use the information contained in it. A non-NULL @disk
* is only allowed if the caller knows that the low level driver doesn't
* need it (e.g. in the scsi subsystem).
*
* Notes:
* - This interface is deprecated - users should use the SG_IO
* interface instead, as this is a more flexible approach to
* performing SCSI commands on a device.
* - The SCSI command length is determined by examining the 1st byte
* of the given command. There is no way to override this.
* - Data transfers are limited to PAGE_SIZE
* - The length (x + y) must be at least OMAX_SB_LEN bytes long to
* accommodate the sense buffer when an error occurs.
* The sense buffer is truncated to OMAX_SB_LEN (16) bytes so that
* old code will not be surprised.
* - If a Unix error occurs (e.g. ENOMEM) then the user will receive
* a negative return and the Unix error code in 'errno'.
* If the SCSI command succeeds then 0 is returned.
* Positive numbers returned are the compacted SCSI error codes (4
* bytes in one int) where the lowest byte is the SCSI status.
*/
#define OMAX_SB_LEN 16 /* For backward compatibility */
int sg_scsi_ioctl(struct request_queue *q, struct gendisk *disk, fmode_t mode,
struct scsi_ioctl_command __user *sic)
{
struct request *rq;
int err;
unsigned int in_len, out_len, bytes, opcode, cmdlen;
char *buffer = NULL, sense[SCSI_SENSE_BUFFERSIZE];
if (!sic)
return -EINVAL;
/*
* get in an out lengths, verify they don't exceed a page worth of data
*/
if (get_user(in_len, &sic->inlen))
return -EFAULT;
if (get_user(out_len, &sic->outlen))
return -EFAULT;
if (in_len > PAGE_SIZE || out_len > PAGE_SIZE)
return -EINVAL;
if (get_user(opcode, sic->data))
return -EFAULT;
bytes = max(in_len, out_len);
if (bytes) {
buffer = kzalloc(bytes, q->bounce_gfp | GFP_USER| __GFP_NOWARN);
if (!buffer)
return -ENOMEM;
}
rq = blk_get_request(q, in_len ? WRITE : READ, __GFP_RECLAIM);
if (IS_ERR(rq)) {
err = PTR_ERR(rq);
goto error_free_buffer;
}
blk_rq_set_block_pc(rq);
cmdlen = COMMAND_SIZE(opcode);
/*
* get command and data to send to device, if any
*/
err = -EFAULT;
rq->cmd_len = cmdlen;
if (copy_from_user(rq->cmd, sic->data, cmdlen))
goto error;
if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len))
goto error;
err = blk_verify_command(rq->cmd, mode & FMODE_WRITE);
if (err)
goto error;
/* default. possible overriden later */
rq->retries = 5;
switch (opcode) {
case SEND_DIAGNOSTIC:
case FORMAT_UNIT:
rq->timeout = FORMAT_UNIT_TIMEOUT;
rq->retries = 1;
break;
case START_STOP:
rq->timeout = START_STOP_TIMEOUT;
break;
case MOVE_MEDIUM:
rq->timeout = MOVE_MEDIUM_TIMEOUT;
break;
case READ_ELEMENT_STATUS:
rq->timeout = READ_ELEMENT_STATUS_TIMEOUT;
break;
case READ_DEFECT_DATA:
rq->timeout = READ_DEFECT_DATA_TIMEOUT;
rq->retries = 1;
break;
default:
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
break;
}
if (bytes && blk_rq_map_kern(q, rq, buffer, bytes, __GFP_RECLAIM)) {
err = DRIVER_ERROR << 24;
goto error;
}
memset(sense, 0, sizeof(sense));
rq->sense = sense;
rq->sense_len = 0;
blk_execute_rq(q, disk, rq, 0);
err = rq->errors & 0xff; /* only 8 bit SCSI status */
if (err) {
if (rq->sense_len && rq->sense) {
bytes = (OMAX_SB_LEN > rq->sense_len) ?
rq->sense_len : OMAX_SB_LEN;
if (copy_to_user(sic->data, rq->sense, bytes))
err = -EFAULT;
}
} else {
if (copy_to_user(sic->data, buffer, out_len))
err = -EFAULT;
}
error:
blk_put_request(rq);
error_free_buffer:
kfree(buffer);
return err;
}
static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
struct sg_io_hdr *hdr, fmode_t mode)
{
unsigned long start_time;
ssize_t ret = 0;
int writing = 0;
int at_head = 0;
struct request *rq;
char sense[SCSI_SENSE_BUFFERSIZE];
struct bio *bio;
if (hdr->interface_id != 'S')
return -EINVAL;
if (hdr->dxfer_len > (queue_max_hw_sectors(q) << 9))
return -EIO;
if (hdr->dxfer_len)
switch (hdr->dxfer_direction) {
default:
return -EINVAL;
case SG_DXFER_TO_DEV:
writing = 1;
break;
case SG_DXFER_TO_FROM_DEV:
case SG_DXFER_FROM_DEV:
break;
}
if (hdr->flags & SG_FLAG_Q_AT_HEAD)
at_head = 1;
ret = -ENOMEM;
rq = blk_get_request(q, writing ? WRITE : READ, GFP_KERNEL);
if (IS_ERR(rq))
return PTR_ERR(rq);
blk_rq_set_block_pc(rq);
if (hdr->cmd_len > BLK_MAX_CDB) {
rq->cmd = kzalloc(hdr->cmd_len, GFP_KERNEL);
if (!rq->cmd)
goto out_put_request;
}
ret = blk_fill_sghdr_rq(q, rq, hdr, mode);
if (ret < 0)
goto out_free_cdb;
ret = 0;
if (hdr->iovec_count) {
struct iov_iter i;
struct iovec *iov = NULL;
ret = import_iovec(rq_data_dir(rq),
hdr->dxferp, hdr->iovec_count,
0, &iov, &i);
if (ret < 0)
goto out_free_cdb;
/* SG_IO howto says that the shorter of the two wins */
iov_iter_truncate(&i, hdr->dxfer_len);
ret = blk_rq_map_user_iov(q, rq, NULL, &i, GFP_KERNEL);
kfree(iov);
} else if (hdr->dxfer_len)
ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
GFP_KERNEL);
if (ret)
goto out_free_cdb;
bio = rq->bio;
memset(sense, 0, sizeof(sense));
rq->sense = sense;
rq->sense_len = 0;
rq->retries = 0;
start_time = jiffies;
/* ignore return value. All information is passed back to caller
* (if he doesn't check that is his problem).
* N.B. a non-zero SCSI status is _not_ necessarily an error.
*/
blk_execute_rq(q, bd_disk, rq, at_head);
hdr->duration = jiffies_to_msecs(jiffies - start_time);
ret = blk_complete_sghdr_rq(rq, hdr, bio);
out_free_cdb:
if (rq->cmd != rq->__cmd)
kfree(rq->cmd);
out_put_request:
blk_put_request(rq);
return ret;
}
static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
struct sg_io_hdr *hdr, fmode_t mode)
{
unsigned long start_time;
ssize_t ret = 0;
int writing = 0;
int at_head = 0;
struct request *rq;
char sense[SCSI_SENSE_BUFFERSIZE];
struct bio *bio;
if (hdr->interface_id != 'S')
return -EINVAL;
if (hdr->dxfer_len > (queue_max_hw_sectors(q) << 9))
return -EIO;
if (hdr->dxfer_len)
switch (hdr->dxfer_direction) {
default:
return -EINVAL;
case SG_DXFER_TO_DEV:
writing = 1;
break;
case SG_DXFER_TO_FROM_DEV:
case SG_DXFER_FROM_DEV:
break;
}
if (hdr->flags & SG_FLAG_Q_AT_HEAD)
at_head = 1;
ret = -ENOMEM;
rq = blk_get_request(q, writing ? WRITE : READ, GFP_KERNEL);
if (IS_ERR(rq))
return PTR_ERR(rq);
blk_rq_set_block_pc(rq);
if (hdr->cmd_len > BLK_MAX_CDB) {
rq->cmd = kzalloc(hdr->cmd_len, GFP_KERNEL);
if (!rq->cmd)
goto out_put_request;
}
ret = -EFAULT;
if (blk_fill_sghdr_rq(q, rq, hdr, mode))
goto out_free_cdb;
ret = 0;
if (hdr->iovec_count) {
struct iov_iter i;
struct iovec *iov = NULL;
ret = rw_copy_check_uvector(-1, hdr->dxferp, hdr->iovec_count,
0, NULL, &iov);
if (ret < 0) {
kfree(iov);
goto out_free_cdb;
}
/* SG_IO howto says that the shorter of the two wins */
iov_iter_init(&i, rq_data_dir(rq), iov, hdr->iovec_count,
min_t(unsigned, ret, hdr->dxfer_len));
ret = blk_rq_map_user_iov(q, rq, NULL, &i, GFP_KERNEL);
kfree(iov);
} else if (hdr->dxfer_len)
