static void coroutine_fn mirror_run(void *opaque)
{
MirrorBlockJob *s = opaque;
MirrorExitData *data;
BlockDriverState *bs = s->common.bs;
int64_t sector_num, end, length;
uint64_t last_pause_ns;
BlockDriverInfo bdi;
char backing_filename[2]; /* we only need 2 characters because we are only
checking for a NULL string */
int ret = 0;
int n;
if (block_job_is_cancelled(&s->common)) {
goto immediate_exit;
}
s->bdev_length = bdrv_getlength(bs);
if (s->bdev_length < 0) {
ret = s->bdev_length;
goto immediate_exit;
} else if (s->bdev_length == 0) {
/* Report BLOCK_JOB_READY and wait for complete. */
block_job_event_ready(&s->common);
s->synced = true;
while (!block_job_is_cancelled(&s->common) && !s->should_complete) {
block_job_yield(&s->common);
}
s->common.cancelled = false;
goto immediate_exit;
}
length = DIV_ROUND_UP(s->bdev_length, s->granularity);
s->in_flight_bitmap = bitmap_new(length);
/* If we have no backing file yet in the destination, we cannot let
* the destination do COW. Instead, we copy sectors around the
* dirty data if needed. We need a bitmap to do that.
*/
bdrv_get_backing_filename(s->target, backing_filename,
sizeof(backing_filename));
if (backing_filename[0] && !s->target->backing) {
ret = bdrv_get_info(s->target, &bdi);
if (ret < 0) {
goto immediate_exit;
}
if (s->granularity < bdi.cluster_size) {
s->buf_size = MAX(s->buf_size, bdi.cluster_size);
s->cow_bitmap = bitmap_new(length);
}
}
end = s->bdev_length / BDRV_SECTOR_SIZE;
s->buf = qemu_try_blockalign(bs, s->buf_size);
if (s->buf == NULL) {
ret = -ENOMEM;
goto immediate_exit;
}
mirror_free_init(s);
last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
if (!s->is_none_mode) {
/* First part, loop on the sectors and initialize the dirty bitmap. */
BlockDriverState *base = s->base;
bool mark_all_dirty = s->base == NULL && !bdrv_has_zero_init(s->target);
for (sector_num = 0; sector_num < end; ) {
/* Just to make sure we are not exceeding int limit. */
int nb_sectors = MIN(INT_MAX >> BDRV_SECTOR_BITS,
end - sector_num);
int64_t now = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
if (now - last_pause_ns > SLICE_TIME) {
last_pause_ns = now;
block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, 0);
}
if (block_job_is_cancelled(&s->common)) {
goto immediate_exit;
}
ret = bdrv_is_allocated_above(bs, base, sector_num, nb_sectors, &n);
if (ret < 0) {
goto immediate_exit;
}
assert(n > 0);
if (ret == 1 || mark_all_dirty) {
bdrv_set_dirty_bitmap(s->dirty_bitmap, sector_num, n);
}
sector_num += n;
}
}
static void coroutine_fn mirror_run(void *opaque)
{
MirrorBlockJob *s = opaque;
MirrorExitData *data;
BlockDriverState *bs = s->source;
BlockDriverState *target_bs = blk_bs(s->target);
bool need_drain = true;
int64_t length;
BlockDriverInfo bdi;
char backing_filename[2]; /* we only need 2 characters because we are only
checking for a NULL string */
int ret = 0;
if (block_job_is_cancelled(&s->common)) {
goto immediate_exit;
}
s->bdev_length = bdrv_getlength(bs);
if (s->bdev_length < 0) {
ret = s->bdev_length;
goto immediate_exit;
}
/* Active commit must resize the base image if its size differs from the
* active layer. */
if (s->base == blk_bs(s->target)) {
int64_t base_length;
base_length = blk_getlength(s->target);
if (base_length < 0) {
ret = base_length;
goto immediate_exit;
}
if (s->bdev_length > base_length) {
ret = blk_truncate(s->target, s->bdev_length, PREALLOC_MODE_OFF,
NULL);
if (ret < 0) {
goto immediate_exit;
}
}
}
if (s->bdev_length == 0) {
/* Report BLOCK_JOB_READY and wait for complete. */
block_job_event_ready(&s->common);
s->synced = true;
while (!block_job_is_cancelled(&s->common) && !s->should_complete) {
block_job_yield(&s->common);
}
s->common.cancelled = false;
goto immediate_exit;
}
length = DIV_ROUND_UP(s->bdev_length, s->granularity);
s->in_flight_bitmap = bitmap_new(length);
/* If we have no backing file yet in the destination, we cannot let
* the destination do COW. Instead, we copy sectors around the
* dirty data if needed. We need a bitmap to do that.
*/
bdrv_get_backing_filename(target_bs, backing_filename,
sizeof(backing_filename));
if (!bdrv_get_info(target_bs, &bdi) && bdi.cluster_size) {
s->target_cluster_size = bdi.cluster_size;
} else {
s->target_cluster_size = BDRV_SECTOR_SIZE;
}
if (backing_filename[0] && !target_bs->backing &&
s->granularity < s->target_cluster_size) {
s->buf_size = MAX(s->buf_size, s->target_cluster_size);
s->cow_bitmap = bitmap_new(length);
}
s->max_iov = MIN(bs->bl.max_iov, target_bs->bl.max_iov);
s->buf = qemu_try_blockalign(bs, s->buf_size);
if (s->buf == NULL) {
ret = -ENOMEM;
goto immediate_exit;
}
mirror_free_init(s);
s->last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
if (!s->is_none_mode) {
ret = mirror_dirty_init(s);
if (ret < 0 || block_job_is_cancelled(&s->common)) {
goto immediate_exit;
}
}
assert(!s->dbi);
s->dbi = bdrv_dirty_iter_new(s->dirty_bitmap);
for (;;) {
uint64_t delay_ns = 0;
int64_t cnt, delta;
bool should_complete;
if (s->ret < 0) {
ret = s->ret;
goto immediate_exit;
}
block_job_pause_point(&s->common);
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
/* cnt is the number of dirty bytes remaining and s->bytes_in_flight is
* the number of bytes currently being processed; together those are
* the current remaining operation length */
block_job_progress_set_remaining(&s->common, s->bytes_in_flight + cnt);
/* Note that even when no rate limit is applied we need to yield
* periodically with no pending I/O so that bdrv_drain_all() returns.
* We do so every BLKOCK_JOB_SLICE_TIME nanoseconds, or when there is
* an error, or when the source is clean, whichever comes first. */
delta = qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - s->last_pause_ns;
if (delta < BLOCK_JOB_SLICE_TIME &&
s->common.iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
if (s->in_flight >= MAX_IN_FLIGHT || s->buf_free_count == 0 ||
(cnt == 0 && s->in_flight > 0)) {
trace_mirror_yield(s, cnt, s->buf_free_count, s->in_flight);
mirror_wait_for_io(s);
continue;
} else if (cnt != 0) {
delay_ns = mirror_iteration(s);
}
}
should_complete = false;
if (s->in_flight == 0 && cnt == 0) {
trace_mirror_before_flush(s);
if (!s->synced) {
if (mirror_flush(s) < 0) {
/* Go check s->ret. */
continue;
}
/* We're out of the streaming phase. From now on, if the job
* is cancelled we will actually complete all pending I/O and
* report completion. This way, block-job-cancel will leave
* the target in a consistent state.
*/
block_job_event_ready(&s->common);
s->synced = true;
}
should_complete = s->should_complete ||
block_job_is_cancelled(&s->common);
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
}
if (cnt == 0 && should_complete) {
/* The dirty bitmap is not updated while operations are pending.
* If we're about to exit, wait for pending operations before
* calling bdrv_get_dirty_count(bs), or we may exit while the
* source has dirty data to copy!
*
* Note that I/O can be submitted by the guest while
* mirror_populate runs, so pause it now. Before deciding
* whether to switch to target check one last time if I/O has
* come in the meanwhile, and if not flush the data to disk.
*/
trace_mirror_before_drain(s, cnt);
bdrv_drained_begin(bs);
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
if (cnt > 0 || mirror_flush(s) < 0) {
bdrv_drained_end(bs);
continue;
}
/* The two disks are in sync. Exit and report successful
* completion.
*/
assert(QLIST_EMPTY(&bs->tracked_requests));
s->common.cancelled = false;
need_drain = false;
break;
}
ret = 0;
if (s->synced && !should_complete) {
delay_ns = (s->in_flight == 0 &&
cnt == 0 ? BLOCK_JOB_SLICE_TIME : 0);
}
trace_mirror_before_sleep(s, cnt, s->synced, delay_ns);
block_job_sleep_ns(&s->common, delay_ns);
if (block_job_is_cancelled(&s->common) &&
(!s->synced || s->common.force))
{
break;
}
s->last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
}
immediate_exit:
if (s->in_flight > 0) {
/* We get here only if something went wrong. Either the job failed,
* or it was cancelled prematurely so that we do not guarantee that
* the target is a copy of the source.
*/
assert(ret < 0 || ((s->common.force || !s->synced) &&
block_job_is_cancelled(&s->common)));
assert(need_drain);
mirror_wait_for_all_io(s);
}
assert(s->in_flight == 0);
qemu_vfree(s->buf);
g_free(s->cow_bitmap);
g_free(s->in_flight_bitmap);
bdrv_dirty_iter_free(s->dbi);
data = g_malloc(sizeof(*data));
data->ret = ret;
if (need_drain) {
bdrv_drained_begin(bs);
}
block_job_defer_to_main_loop(&s->common, mirror_exit, data);
}
static void coroutine_fn mirror_run(void *opaque)
{
MirrorBlockJob *s = opaque;
MirrorExitData *data;
BlockDriverState *bs = s->common.bs;
int64_t sector_num, end, sectors_per_chunk, length;
uint64_t last_pause_ns;
BlockDriverInfo bdi;
char backing_filename[2]; /* we only need 2 characters because we are only
checking for a NULL string */
int ret = 0;
int n;
if (block_job_is_cancelled(&s->common)) {
goto immediate_exit;
}
s->bdev_length = bdrv_getlength(bs);
if (s->bdev_length < 0) {
ret = s->bdev_length;
goto immediate_exit;
} else if (s->bdev_length == 0) {
/* Report BLOCK_JOB_READY and wait for complete. */
block_job_event_ready(&s->common);
s->synced = true;
while (!block_job_is_cancelled(&s->common) && !s->should_complete) {
block_job_yield(&s->common);
}
s->common.cancelled = false;
goto immediate_exit;
}
length = DIV_ROUND_UP(s->bdev_length, s->granularity);
s->in_flight_bitmap = bitmap_new(length);
/* If we have no backing file yet in the destination, we cannot let
* the destination do COW. Instead, we copy sectors around the
* dirty data if needed. We need a bitmap to do that.
*/
bdrv_get_backing_filename(s->target, backing_filename,
sizeof(backing_filename));
if (backing_filename[0] && !s->target->backing_hd) {
ret = bdrv_get_info(s->target, &bdi);
if (ret < 0) {
goto immediate_exit;
}
if (s->granularity < bdi.cluster_size) {
s->buf_size = MAX(s->buf_size, bdi.cluster_size);
s->cow_bitmap = bitmap_new(length);
}
}
end = s->bdev_length / BDRV_SECTOR_SIZE;
s->buf = qemu_try_blockalign(bs, s->buf_size);
if (s->buf == NULL) {
ret = -ENOMEM;
goto immediate_exit;
}
sectors_per_chunk = s->granularity >> BDRV_SECTOR_BITS;
mirror_free_init(s);
if (!s->is_none_mode) {
/* First part, loop on the sectors and initialize the dirty bitmap. */
BlockDriverState *base = s->base;
for (sector_num = 0; sector_num < end; ) {
int64_t next = (sector_num | (sectors_per_chunk - 1)) + 1;
ret = bdrv_is_allocated_above(bs, base,
sector_num, next - sector_num, &n);
if (ret < 0) {
goto immediate_exit;
}
assert(n > 0);
if (ret == 1) {
bdrv_set_dirty_bitmap(s->dirty_bitmap, sector_num, n);
sector_num = next;
} else {
sector_num += n;
}
}
}
bdrv_dirty_iter_init(s->dirty_bitmap, &s->hbi);
last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
for (;;) {
uint64_t delay_ns = 0;
int64_t cnt;
bool should_complete;
if (s->ret < 0) {
ret = s->ret;
goto immediate_exit;
}
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
/* s->common.offset contains the number of bytes already processed so
* far, cnt is the number of dirty sectors remaining and
* s->sectors_in_flight is the number of sectors currently being
* processed; together those are the current total operation length */
s->common.len = s->common.offset +
(cnt + s->sectors_in_flight) * BDRV_SECTOR_SIZE;
/* Note that even when no rate limit is applied we need to yield
* periodically with no pending I/O so that bdrv_drain_all() returns.
* We do so every SLICE_TIME nanoseconds, or when there is an error,
* or when the source is clean, whichever comes first.
*/
if (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - last_pause_ns < SLICE_TIME &&
s->common.iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
if (s->in_flight == MAX_IN_FLIGHT || s->buf_free_count == 0 ||
(cnt == 0 && s->in_flight > 0)) {
trace_mirror_yield(s, s->in_flight, s->buf_free_count, cnt);
qemu_coroutine_yield();
continue;
} else if (cnt != 0) {
delay_ns = mirror_iteration(s);
}
}
should_complete = false;
if (s->in_flight == 0 && cnt == 0) {
trace_mirror_before_flush(s);
ret = bdrv_flush(s->target);
if (ret < 0) {
if (mirror_error_action(s, false, -ret) ==
BLOCK_ERROR_ACTION_REPORT) {
goto immediate_exit;
}
} else {
/* We're out of the streaming phase. From now on, if the job
* is cancelled we will actually complete all pending I/O and
* report completion. This way, block-job-cancel will leave
* the target in a consistent state.
*/
if (!s->synced) {
block_job_event_ready(&s->common);
s->synced = true;
}
should_complete = s->should_complete ||
block_job_is_cancelled(&s->common);
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
}
}
if (cnt == 0 && should_complete) {
/* The dirty bitmap is not updated while operations are pending.
* If we're about to exit, wait for pending operations before
* calling bdrv_get_dirty_count(bs), or we may exit while the
* source has dirty data to copy!
*
* Note that I/O can be submitted by the guest while
* mirror_populate runs.
*/
trace_mirror_before_drain(s, cnt);
bdrv_drain(bs);
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
}
ret = 0;
trace_mirror_before_sleep(s, cnt, s->synced, delay_ns);
if (!s->synced) {
block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
if (block_job_is_cancelled(&s->common)) {
break;
}
} else if (!should_complete) {
delay_ns = (s->in_flight == 0 && cnt == 0 ? SLICE_TIME : 0);
block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
} else if (cnt == 0) {
/* The two disks are in sync. Exit and report successful
* completion.
*/
assert(QLIST_EMPTY(&bs->tracked_requests));
s->common.cancelled = false;
break;
}
last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
}
immediate_exit:
if (s->in_flight > 0) {
/* We get here only if something went wrong. Either the job failed,
* or it was cancelled prematurely so that we do not guarantee that
* the target is a copy of the source.
*/
assert(ret < 0 || (!s->synced && block_job_is_cancelled(&s->common)));
mirror_drain(s);
}
assert(s->in_flight == 0);
qemu_vfree(s->buf);
g_free(s->cow_bitmap);
g_free(s->in_flight_bitmap);
bdrv_release_dirty_bitmap(bs, s->dirty_bitmap);
bdrv_iostatus_disable(s->target);
data = g_malloc(sizeof(*data));
data->ret = ret;
block_job_defer_to_main_loop(&s->common, mirror_exit, data);
}