int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
struct usb_ehci *ehci = (struct usb_ehci *)(USB_BASE_ADDR +
(0x200 * index));
if (index > 3)
return -EINVAL;
enable_usboh3_clk(1);
mdelay(1);
/* Do board specific initialization */
board_ehci_hcd_init(index);
usb_power_config(index);
usb_oc_config(index);
usb_internal_phy_clock_gate(index, 1);
usb_phy_enable(index, ehci);
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
board_ehci_power(index, (init == USB_INIT_DEVICE) ? 0 : 1);
if (init == USB_INIT_DEVICE)
return 0;
setbits_le32(&ehci->usbmode, CM_HOST);
__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
setbits_le32(&ehci->portsc, USB_EN);
mdelay(10);
return 0;
}
static int ehci_usb_probe(struct udevice *dev)
{
struct usb_platdata *plat = dev_get_platdata(dev);
struct usb_ehci *ehci = (struct usb_ehci *)dev_get_addr(dev);
struct ehci_mx6_priv_data *priv = dev_get_priv(dev);
struct ehci_hccr *hccr;
struct ehci_hcor *hcor;
int ret;
priv->ehci = ehci;
priv->portnr = dev->seq;
priv->init_type = plat->init_type;
ret = ehci_mx6_common_init(ehci, priv->portnr);
if (ret)
return ret;
board_ehci_power(priv->portnr, (priv->init_type == USB_INIT_DEVICE) ? 0 : 1);
if (priv->init_type == USB_INIT_HOST) {
setbits_le32(&ehci->usbmode, CM_HOST);
writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
setbits_le32(&ehci->portsc, USB_EN);
}
mdelay(10);
hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
hcor = (struct ehci_hcor *)((uint32_t)hccr +
HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
return ehci_register(dev, hccr, hcor, &mx6_ehci_ops, 0, priv->init_type);
}
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
enum usb_init_type type;
#if defined(CONFIG_MX6)
u32 controller_spacing = 0x200;
#elif defined(CONFIG_MX7)
u32 controller_spacing = 0x10000;
#endif
struct usb_ehci *ehci = (struct usb_ehci *)(USB_BASE_ADDR +
(controller_spacing * index));
int ret;
if (index > 3)
return -EINVAL;
enable_usboh3_clk(1);
mdelay(1);
/* Do board specific initialization */
ret = board_ehci_hcd_init(index);
if (ret)
return ret;
usb_power_config(index);
usb_oc_config(index);
#if defined(CONFIG_MX6)
usb_internal_phy_clock_gate(index, 1);
usb_phy_enable(index, ehci);
#endif
type = board_usb_phy_mode(index);
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
if ((type == init) || (type == USB_INIT_DEVICE))
board_ehci_power(index, (type == USB_INIT_DEVICE) ? 0 : 1);
if (type != init)
return -ENODEV;
if (type == USB_INIT_DEVICE)
return 0;
setbits_le32(&ehci->usbmode, CM_HOST);
writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
setbits_le32(&ehci->portsc, USB_EN);
mdelay(10);
return 0;
}
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
enum usb_init_type type;
#if defined(CONFIG_MX6)
u32 controller_spacing = 0x200;
#elif defined(CONFIG_MX7)
u32 controller_spacing = 0x10000;
#endif
struct usb_ehci *ehci = (struct usb_ehci *)(USB_BASE_ADDR +
(controller_spacing * index));
int ret;
if (index > 3)
return -EINVAL;
ret = ehci_mx6_common_init(ehci, index);
if (ret)
return ret;
type = board_usb_phy_mode(index);
if (hccr && hcor) {
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
}
if ((type == init) || (type == USB_INIT_DEVICE))
board_ehci_power(index, (type == USB_INIT_DEVICE) ? 0 : 1);
if (type != init)
return -ENODEV;
if (type == USB_INIT_DEVICE)
return 0;
setbits_le32(&ehci->usbmode, CM_HOST);
writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
setbits_le32(&ehci->portsc, USB_EN);
mdelay(10);
return 0;
}
static int mx6_init_after_reset(struct ehci_ctrl *dev)
{
struct ehci_mx6_priv_data *priv = dev->priv;
enum usb_init_type type = priv->init_type;
struct usb_ehci *ehci = priv->ehci;
int ret;
ret = ehci_mx6_common_init(priv->ehci, priv->portnr);
if (ret)
return ret;
board_ehci_power(priv->portnr, (type == USB_INIT_DEVICE) ? 0 : 1);
if (type == USB_INIT_DEVICE)
return 0;
setbits_le32(&ehci->usbmode, CM_HOST);
writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
setbits_le32(&ehci->portsc, USB_EN);
mdelay(10);
return 0;
}
