/* Interpolate between two vertices and put the result into a0.0.
* Increment a0.0 accordingly.
*/
void brw_clip_interp_vertex( struct brw_clip_compile *c,
struct brw_indirect dest_ptr,
struct brw_indirect v0_ptr, /* from */
struct brw_indirect v1_ptr, /* to */
struct brw_reg t0,
GLboolean force_edgeflag)
{
struct brw_compile *p = &c->func;
struct brw_reg tmp = get_tmp(c);
GLuint i;
/* Just copy the vertex header:
*/
brw_copy_indirect_to_indirect(p, dest_ptr, v0_ptr, 1);
/* Iterate over each attribute (could be done in pairs?)
*/
for (i = 0; i < c->nr_attrs; i++) {
GLuint delta = i*16 + 32;
if (delta == c->offset[VERT_RESULT_EDGE]) {
if (force_edgeflag)
brw_MOV(p, deref_4f(dest_ptr, delta), brw_imm_f(1));
else
brw_MOV(p, deref_4f(dest_ptr, delta), deref_4f(v0_ptr, delta));
}
else {
/* Interpolate:
*
* New = attr0 + t*attr1 - t*attr0
*/
brw_MUL(p,
vec4(brw_null_reg()),
deref_4f(v1_ptr, delta),
t0);
brw_MAC(p,
tmp,
negate(deref_4f(v0_ptr, delta)),
t0);
brw_ADD(p,
deref_4f(dest_ptr, delta),
deref_4f(v0_ptr, delta),
tmp);
}
}
if (i & 1) {
GLuint delta = i*16 + 32;
brw_MOV(p, deref_4f(dest_ptr, delta), brw_imm_f(0));
}
release_tmp(c, tmp);
/* Recreate the projected (NDC) coordinate in the new vertex
* header:
*/
brw_clip_project_vertex(c, dest_ptr );
}
/* Interpolate between two vertices and put the result into a0.0.
* Increment a0.0 accordingly.
*
* Beware that dest_ptr can be equal to v0_ptr!
*/
void brw_clip_interp_vertex( struct brw_clip_compile *c,
struct brw_indirect dest_ptr,
struct brw_indirect v0_ptr, /* from */
struct brw_indirect v1_ptr, /* to */
struct brw_reg t0,
bool force_edgeflag)
{
struct brw_codegen *p = &c->func;
struct brw_reg t_nopersp, v0_ndc_copy;
GLuint slot;
/* Just copy the vertex header:
*/
/*
* After CLIP stage, only first 256 bits of the VUE are read
* back on Ironlake, so needn't change it
*/
brw_copy_indirect_to_indirect(p, dest_ptr, v0_ptr, 1);
/* First handle the 3D and NDC interpolation, in case we
* need noperspective interpolation. Doing it early has no
* performance impact in any case.
*/
/* Take a copy of the v0 NDC coordinates, in case dest == v0. */
if (c->has_noperspective_shading) {
GLuint offset = brw_varying_to_offset(&c->vue_map,
BRW_VARYING_SLOT_NDC);
v0_ndc_copy = get_tmp(c);
brw_MOV(p, v0_ndc_copy, deref_4f(v0_ptr, offset));
}
/* Compute the new 3D position
*
* dest_hpos = v0_hpos * (1 - t0) + v1_hpos * t0
*/
{
GLuint delta = brw_varying_to_offset(&c->vue_map, VARYING_SLOT_POS);
struct brw_reg tmp = get_tmp(c);
brw_MUL(p, vec4(brw_null_reg()), deref_4f(v1_ptr, delta), t0);
brw_MAC(p, tmp, negate(deref_4f(v0_ptr, delta)), t0);
brw_ADD(p, deref_4f(dest_ptr, delta), deref_4f(v0_ptr, delta), tmp);
release_tmp(c, tmp);
}
/* Recreate the projected (NDC) coordinate in the new vertex header */
brw_clip_project_vertex(c, dest_ptr);
/* If we have noperspective attributes,
* we need to compute the screen-space t
*/
if (c->has_noperspective_shading) {
GLuint delta = brw_varying_to_offset(&c->vue_map,
BRW_VARYING_SLOT_NDC);
struct brw_reg tmp = get_tmp(c);
t_nopersp = get_tmp(c);
/* t_nopersp = vec4(v1.xy, dest.xy) */
brw_MOV(p, t_nopersp, deref_4f(v1_ptr, delta));
brw_MOV(p, tmp, deref_4f(dest_ptr, delta));
brw_set_default_access_mode(p, BRW_ALIGN_16);
brw_MOV(p,
brw_writemask(t_nopersp, WRITEMASK_ZW),
brw_swizzle(tmp, 0, 1, 0, 1));
/* t_nopersp = vec4(v1.xy, dest.xy) - v0.xyxy */
brw_ADD(p, t_nopersp, t_nopersp,
negate(brw_swizzle(v0_ndc_copy, 0, 1, 0, 1)));
/* Add the absolute values of the X and Y deltas so that if
* the points aren't in the same place on the screen we get
* nonzero values to divide.
*
* After that, we have vert1 - vert0 in t_nopersp.x and
* vertnew - vert0 in t_nopersp.y
*
* t_nopersp = vec2(|v1.x -v0.x| + |v1.y -v0.y|,
* |dest.x-v0.x| + |dest.y-v0.y|)
*/
brw_ADD(p,
brw_writemask(t_nopersp, WRITEMASK_XY),
brw_abs(brw_swizzle(t_nopersp, 0, 2, 0, 0)),
brw_abs(brw_swizzle(t_nopersp, 1, 3, 0, 0)));
brw_set_default_access_mode(p, BRW_ALIGN_1);
/* If the points are in the same place, just substitute a
* value to avoid divide-by-zero
*/
brw_CMP(p, vec1(brw_null_reg()), BRW_CONDITIONAL_EQ,
vec1(t_nopersp),
brw_imm_f(0));
brw_IF(p, BRW_EXECUTE_1);
brw_MOV(p, t_nopersp, brw_imm_vf4(brw_float_to_vf(1.0),
brw_float_to_vf(0.0),
brw_float_to_vf(0.0),
brw_float_to_vf(0.0)));
brw_ENDIF(p);
/* Now compute t_nopersp = t_nopersp.y/t_nopersp.x and broadcast it. */
brw_math_invert(p, get_element(t_nopersp, 0), get_element(t_nopersp, 0));
brw_MUL(p, vec1(t_nopersp), vec1(t_nopersp),
vec1(suboffset(t_nopersp, 1)));
brw_set_default_access_mode(p, BRW_ALIGN_16);
brw_MOV(p, t_nopersp, brw_swizzle(t_nopersp, 0, 0, 0, 0));
brw_set_default_access_mode(p, BRW_ALIGN_1);
release_tmp(c, tmp);
release_tmp(c, v0_ndc_copy);
}
/* Now we can iterate over each attribute
* (could be done in pairs?)
*/
for (slot = 0; slot < c->vue_map.num_slots; slot++) {
int varying = c->vue_map.slot_to_varying[slot];
GLuint delta = brw_vue_slot_to_offset(slot);
/* HPOS, NDC already handled above */
if (varying == VARYING_SLOT_POS || varying == BRW_VARYING_SLOT_NDC)
continue;
if (varying == VARYING_SLOT_EDGE) {
if (force_edgeflag)
brw_MOV(p, deref_4f(dest_ptr, delta), brw_imm_f(1));
else
brw_MOV(p, deref_4f(dest_ptr, delta), deref_4f(v0_ptr, delta));
} else if (varying == VARYING_SLOT_PSIZ) {
/* PSIZ doesn't need interpolation because it isn't used by the
* fragment shader.
*/
} else if (varying < VARYING_SLOT_MAX) {
/* This is a true vertex result (and not a special value for the VUE
* header), so interpolate:
*
* New = attr0 + t*attr1 - t*attr0
*
* Unless the attribute is flat shaded -- in which case just copy
* from one of the sources (doesn't matter which; already copied from pv)
*/
GLuint interp = c->key.interpolation_mode.mode[slot];
if (interp != INTERP_QUALIFIER_FLAT) {
struct brw_reg tmp = get_tmp(c);
struct brw_reg t =
interp == INTERP_QUALIFIER_NOPERSPECTIVE ? t_nopersp : t0;
brw_MUL(p,
vec4(brw_null_reg()),
deref_4f(v1_ptr, delta),
t);
brw_MAC(p,
tmp,
negate(deref_4f(v0_ptr, delta)),
t);
brw_ADD(p,
deref_4f(dest_ptr, delta),
deref_4f(v0_ptr, delta),
tmp);
release_tmp(c, tmp);
}
else {
brw_MOV(p,
deref_4f(dest_ptr, delta),
deref_4f(v0_ptr, delta));
}
}
}
if (c->vue_map.num_slots % 2) {
GLuint delta = brw_vue_slot_to_offset(c->vue_map.num_slots);
brw_MOV(p, deref_4f(dest_ptr, delta), brw_imm_f(0));
}
if (c->has_noperspective_shading)
release_tmp(c, t_nopersp);
}
/* Interpolate between two vertices and put the result into a0.0.
* Increment a0.0 accordingly.
*/
void brw_clip_interp_vertex( struct brw_clip_compile *c,
struct brw_indirect dest_ptr,
struct brw_indirect v0_ptr, /* from */
struct brw_indirect v1_ptr, /* to */
struct brw_reg t0,
bool force_edgeflag)
{
struct brw_compile *p = &c->func;
struct brw_reg tmp = get_tmp(c);
GLuint slot;
/* Just copy the vertex header:
*/
/*
* After CLIP stage, only first 256 bits of the VUE are read
* back on Ironlake, so needn't change it
*/
brw_copy_indirect_to_indirect(p, dest_ptr, v0_ptr, 1);
/* Iterate over each attribute (could be done in pairs?)
*/
for (slot = 0; slot < c->vue_map.num_slots; slot++) {
int varying = c->vue_map.slot_to_varying[slot];
GLuint delta = brw_vue_slot_to_offset(slot);
if (varying == VARYING_SLOT_EDGE) {
if (force_edgeflag)
brw_MOV(p, deref_4f(dest_ptr, delta), brw_imm_f(1));
else
brw_MOV(p, deref_4f(dest_ptr, delta), deref_4f(v0_ptr, delta));
} else if (varying == VARYING_SLOT_PSIZ ||
varying == VARYING_SLOT_CLIP_DIST0 ||
varying == VARYING_SLOT_CLIP_DIST1) {
/* PSIZ doesn't need interpolation because it isn't used by the
* fragment shader. CLIP_DIST0 and CLIP_DIST1 don't need
* intepolation because on pre-GEN6, these are just placeholder VUE
* slots that don't perform any action.
*/
} else if (varying < VARYING_SLOT_MAX) {
/* This is a true vertex result (and not a special value for the VUE
* header), so interpolate:
*
* New = attr0 + t*attr1 - t*attr0
*/
brw_MUL(p,
vec4(brw_null_reg()),
deref_4f(v1_ptr, delta),
t0);
brw_MAC(p,
tmp,
negate(deref_4f(v0_ptr, delta)),
t0);
brw_ADD(p,
deref_4f(dest_ptr, delta),
deref_4f(v0_ptr, delta),
tmp);
}
}
if (c->vue_map.num_slots % 2) {
GLuint delta = brw_vue_slot_to_offset(c->vue_map.num_slots);
brw_MOV(p, deref_4f(dest_ptr, delta), brw_imm_f(0));
}
release_tmp(c, tmp);
/* Recreate the projected (NDC) coordinate in the new vertex
* header:
*/
brw_clip_project_vertex(c, dest_ptr );
}