Пример #1
0
uint8_t init_pca9685(uint8_t addr)
{
  uint8_t rc;
  uint8_t bytes[2];

  ets_printf("PCA9685 init ... ");
  // Write MODE1 register (key bits are to set auto-increment and turn off sleep mode
  bytes[0] = 0x00; // MODE1 register
  bytes[1] = 0b00100001; // reset = 1, AI = 1, sleep = 0, allcall = 1
  brzo_i2c_start_transaction(addr, 100);
  brzo_i2c_write(bytes, 2, FALSE);
  rc = brzo_i2c_end_transaction();
  if (rc)
  {
    ets_printf("failed write: %d\r\n", rc);
    goto EXIT_LABEL;
  }

  // Now read back the register to check it took
  brzo_i2c_start_transaction(addr, 100);
  brzo_i2c_write(bytes, 1, FALSE);
  brzo_i2c_read(bytes, 1, FALSE);
  rc = brzo_i2c_end_transaction();
  if (!rc)
  {
    if (bytes[0] == bytes[1])
    {
      ets_printf("success\r\n");
      goto EXIT_LABEL;
    }
    else
    {
      ets_printf("failed read mismatch: 0x%02x\r\n", bytes[0]);
    }
  }
  else
  {
    ets_printf("failed read: %d\r\n", rc);
  }

EXIT_LABEL:

  return rc;
}
Пример #2
0
void toggle_pca9685_leds(uint8_t addr, bool desired_state)
{
  uint8_t rc;
  bool will_be_on;
  uint8_t bytes[8];

  // Turn all LEDs on or off
  // To turn specific LEDs on or off set byte 0 (register) to 0x06 for LED 0,
  // 0x0A for LED 1, 0x0E for LED2, ...
  bytes[0] = 0xfa; // All LEDs
  // bytes[0] = 0x06; // LED 0 only
  ets_printf("Turn LED(s) ");
  if (!desired_state)
  {
    // Turn off
    ets_printf("off ... ");
    bytes[1] = 0;
    bytes[2] = 0;
    bytes[3] = 0;
    bytes[4] = 0b00010000;
    will_be_on = FALSE;
  }
  else
  {
    // Turn on
    ets_printf("on  ... ");
    bytes[1] = 0;
    bytes[2] = 0b00010000;
    bytes[3] = 0;
    bytes[4] = 0;
    will_be_on = TRUE;
  }

  brzo_i2c_start_transaction(addr, 100);
  brzo_i2c_write(bytes, 5, FALSE);
  rc = brzo_i2c_end_transaction();

  if (rc) 
  {
    ets_printf("failed: %d\r\n", rc);
    goto EXIT_LABEL;
  }

  if (!rc)
  {
    ets_printf("success\r\n");
  }

  pca9685_on = will_be_on;

EXIT_LABEL:

  return;
}
Пример #3
0
uint8_t TwoWire::endTransmission(uint8_t sendStop){
  //uint8_t ret = twi_writeTo(txAddress, txBuffer, txBufferLength, sendStop);

  brzo_i2c_write(txBuffer, txBufferLength, !sendStop);
  uint8_t ret = brzo_i2c_end_transaction();

  txBufferIndex = 0;
  txBufferLength = 0;
  transmitting = 0;
  //return ret;
  return ret;
}
Пример #4
0
uint8_t reset_i2c(void)
{
  uint8_t rc;
  uint8_t bytes[2];

  ets_printf("I2C Software Reset Call ... ");
  bytes[0] = 0;  // general call address
  bytes[1] = 0b00000110; // SWRST data
  brzo_i2c_start_transaction(PCA9685_ADDR, 100);
  brzo_i2c_write(bytes, 2, FALSE);
  rc = brzo_i2c_end_transaction();
  if (!rc)
  {
    ets_printf("success\r\n");
  }
  else
  {
    ets_printf("failed\r\n");
  }

  return rc;
}