static int msm8930_csi_vreg_on(void)
{
pr_info("%s\n", __func__);
return camera_sensor_power_enable("8038_l2", 1200000, ®_8038_l2);
}
static int msm8930_s5k6a2ya_vreg_on(void)
{
int rc;
pr_info(" %s\n", __func__);
/* VCM */
rc = camera_sensor_power_enable("8038_l17", 2850000, ®_8038_l17);
pr_info(" sensor_power_enable(\"8038_l17\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err(" sensor_power_enable(\"8038_l17\", 2.8V) FAILED %d\n", rc);
goto enable_s5k6a2ya_vcm_fail;
}
udelay(50);
/* analog */
rc = camera_sensor_power_enable("8038_l8", 2800000, ®_8038_l8);
pr_info(" sensor_power_enable(\"8038_l8\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err(" sensor_power_enable(\"8038_l8\", 2.8V) FAILED %d\n", rc);
goto enable_s5k6a2ya_analog_fail;
}
udelay(50);
/* IO */
rc = gpio_request(CAM_PIN_GPIO_V_CAMIO_1V8_EN, "V_CAMIO_1V8_EN");
pr_info(" cam io gpio_request, %d\n", CAM_PIN_GPIO_V_CAMIO_1V8_EN);
if (rc < 0) {
pr_err(" GPIO(%d) request failed", CAM_PIN_GPIO_V_CAMIO_1V8_EN);
goto enable_s5k6a2ya_io_fail;
}
gpio_direction_output(CAM_PIN_GPIO_V_CAMIO_1V8_EN, 1);
gpio_free(CAM_PIN_GPIO_V_CAMIO_1V8_EN);
udelay(50);
/* reset pin */
rc = gpio_request(CAM_PIN_GPIO_CAM2_RSTz, "s5k6a2ya");
pr_info(" reset pin gpio_request, %d\n", CAM_PIN_GPIO_CAM2_RSTz);
if (rc < 0) {
pr_err(" GPIO(%d) request failed", CAM_PIN_GPIO_CAM2_RSTz);
goto enable_s5k6a2ya_rst_fail;
}
gpio_direction_output(CAM_PIN_GPIO_CAM2_RSTz, 1);
gpio_free(CAM_PIN_GPIO_CAM2_RSTz);
mdelay(1);
/* V_CAM2_D1V2 */
rc = camera_sensor_power_enable("8038_l12", 1200000, ®_8038_l12);
pr_info(" sensor_power_enable(\"8038_l12\", 1.2V) == %d\n", rc);
if (rc < 0) {
pr_err(" sensor_power_enable(\"8038_l12\", 1.2V) FAILED %d\n", rc);
goto enable_s5k6a2ya_cam2_d1v2_fail;
}
udelay(50);
/* CAM Switch */
rc = gpio_request(CAM_PIN_GPIO_CAM2_SEL, "CAM2_SEL");
pr_info(" cam sel gpio_request, %d\n", CAM_PIN_GPIO_CAM2_SEL);
if (rc < 0) {
pr_err(" GPIO(%d) request failed", CAM_PIN_GPIO_CAM2_SEL);
goto enable_s5k6a2ya_cam2_sel_fail;
}
gpio_direction_output(CAM_PIN_GPIO_CAM2_SEL, 1);
gpio_free(CAM_PIN_GPIO_CAM2_SEL);
udelay(50);
udelay(500);
return rc;
enable_s5k6a2ya_cam2_sel_fail:
camera_sensor_power_disable(reg_8038_l12);
enable_s5k6a2ya_cam2_d1v2_fail:
rc = gpio_request(CAM_PIN_GPIO_CAM2_RSTz, "s5k6a2ya");
if (rc < 0)
pr_err(" GPIO(%d) request failed", CAM_PIN_GPIO_CAM2_RSTz);
else {
gpio_direction_output(CAM_PIN_GPIO_CAM2_RSTz, 0);
gpio_free(CAM_PIN_GPIO_CAM2_RSTz);
}
enable_s5k6a2ya_rst_fail:
rc = gpio_request(CAM_PIN_GPIO_V_CAMIO_1V8_EN, "V_CAMIO_1V8_EN");
if (rc < 0)
pr_err(" GPIO(%d) request failed", CAM_PIN_GPIO_V_CAMIO_1V8_EN);
else {
gpio_direction_output(CAM_PIN_GPIO_V_CAMIO_1V8_EN, 0);
gpio_free(CAM_PIN_GPIO_V_CAMIO_1V8_EN);
}
enable_s5k6a2ya_io_fail:
camera_sensor_power_disable(reg_8038_l8);
enable_s5k6a2ya_analog_fail:
camera_sensor_power_disable(reg_8038_l17);
enable_s5k6a2ya_vcm_fail:
return rc;
}
static int msm8930_s5k4e5yx_vreg_on(void)
{
int rc;
pr_info("[CAM] %s\n", __func__);
/* VCM */
rc = camera_sensor_power_enable("8038_l17", 2800000, ®_8038_l17);
pr_info("[CAM] vcm sensor_power_enable(\"8038_l17\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8038_l17\", 2.8V) FAILED %d\n", rc);
goto enable_s5k4e5yx_vcm_fail;
}
udelay(50);
/* digital */
rc = gpio_request(CAM_PIN_GPIO_V_CAM_D1V8_EN, "V_CAM_D1V8_EN");
pr_info("[CAM] digital gpio_request, %d\n", CAM_PIN_GPIO_V_CAM_D1V8_EN);
if (rc < 0) {
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_V_CAM_D1V8_EN);
goto enable_s5k4e5yx_digital_fail;
}
gpio_tlmm_config(
GPIO_CFG(CAM_PIN_GPIO_V_CAM_D1V8_EN, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
gpio_direction_output(CAM_PIN_GPIO_V_CAM_D1V8_EN, 1);
gpio_free(CAM_PIN_GPIO_V_CAM_D1V8_EN);
udelay(50);
/* analog */
rc = camera_sensor_power_enable("8038_l8", 2800000, ®_8038_l8);
pr_info("[CAM] analog sensor_power_enable(\"8038_l8\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8038_l8\", 2.8V) FAILED %d\n", rc);
goto enable_s5k4e5yx_analog_fail;
}
udelay(50);
/* IO */
rc = gpio_request(CAM_PIN_GPIO_V_CAMIO_1V8_EN, "V_CAMIO_1V8_EN");
pr_info("[CAM] cam io gpio_request, %d\n", CAM_PIN_GPIO_V_CAMIO_1V8_EN);
if (rc < 0) {
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_V_CAMIO_1V8_EN);
goto enable_s5k4e5yx_io_fail;
}
gpio_direction_output(CAM_PIN_GPIO_V_CAMIO_1V8_EN, 1);
gpio_free(CAM_PIN_GPIO_V_CAMIO_1V8_EN);
udelay(50);
return rc;
enable_s5k4e5yx_io_fail:
camera_sensor_power_disable(reg_8038_l8);
enable_s5k4e5yx_analog_fail:
rc = gpio_request(CAM_PIN_GPIO_V_CAM_D1V8_EN, "V_CAM_D1V8_EN");
if (rc < 0)
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_V_CAM_D1V8_EN);
else {
gpio_direction_output(CAM_PIN_GPIO_V_CAM_D1V8_EN, 0);
gpio_free(CAM_PIN_GPIO_V_CAM_D1V8_EN);
}
enable_s5k4e5yx_digital_fail:
camera_sensor_power_disable(reg_8038_l17);
enable_s5k4e5yx_vcm_fail:
return rc;
}
static int msm8930_s5k6a1gx_vreg_on(void)
{
int rc;
pr_info("[CAM] %s\n", __func__);
/* VCM */
rc = camera_sensor_power_enable("8038_l17", 2800000, ®_8038_l17);
pr_info("[CAM] sensor_power_enable(\"8038_l17\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8038_l17\", 2.8V) FAILED %d\n", rc);
goto enable_s5k6a1gx_vcm_fail;
}
udelay(50);
/* digital */
rc = gpio_request(CAM_PIN_GPIO_V_CAM_D1V8_EN, "V_CAM_D1V8_EN");
pr_info("[CAM] digital gpio_request, %d\n", CAM_PIN_GPIO_V_CAM_D1V8_EN);
if (rc < 0) {
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_V_CAM_D1V8_EN);
goto enable_s5k6a1gx_digital_fail;
}
gpio_tlmm_config(
GPIO_CFG(CAM_PIN_GPIO_V_CAM_D1V8_EN, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
gpio_direction_output(CAM_PIN_GPIO_V_CAM_D1V8_EN, 1);
gpio_free(CAM_PIN_GPIO_V_CAM_D1V8_EN);
/* VCM PD */ /* TODO */
rc = gpio_request(CAM_PIN_GPIO_CAM_VCM_PD, "CAM_VCM_PD");
pr_info("[CAM] vcm pd gpio_request, %d\n", CAM_PIN_GPIO_CAM_VCM_PD);
if (rc < 0 && rc != -EBUSY) {
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_CAM_VCM_PD);
goto enable_s5k6a1gx_vcm_pd;
} else
rc = 0;
gpio_direction_output(CAM_PIN_GPIO_CAM_VCM_PD, 1);
gpio_free(CAM_PIN_GPIO_CAM_VCM_PD);
udelay(500);
/* analog */
rc = camera_sensor_power_enable("8038_l8", 2800000, ®_8038_l8);
pr_info("[CAM] sensor_power_enable(\"8038_l8\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8038_l8\", 2.8V) FAILED %d\n", rc);
goto enable_s5k6a1gx_analog_fail;
}
udelay(50);
/* IO */
rc = gpio_request(CAM_PIN_GPIO_V_CAMIO_1V8_EN, "V_CAMIO_1V8_EN");
pr_info("[CAM] cam io gpio_request, %d\n", CAM_PIN_GPIO_V_CAMIO_1V8_EN);
if (rc < 0) {
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_V_CAMIO_1V8_EN);
goto enable_s5k6a1gx_io_fail;
}
gpio_direction_output(CAM_PIN_GPIO_V_CAMIO_1V8_EN, 1);
gpio_free(CAM_PIN_GPIO_V_CAMIO_1V8_EN);
udelay(50);
/* reset pin */
rc = gpio_request(CAM_PIN_GPIO_CAM2_RSTz, "s5k6a1gx");
pr_info("[CAM] reset pin gpio_request, %d\n", CAM_PIN_GPIO_CAM2_RSTz);
if (rc < 0) {
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_CAM2_RSTz);
goto enable_s5k6a1gx_rst_fail;
}
gpio_direction_output(CAM_PIN_GPIO_CAM2_RSTz, 1);
gpio_free(CAM_PIN_GPIO_CAM2_RSTz);
udelay(50);
/* 2nd cam digital */
rc = gpio_request(CAM_PIN_GPIO_V_CAM2_D1V2_EN, "V_CAM2_D1V2_EN");
pr_info("[CAM] 2nd cam digital gpio_request, %d\n", CAM_PIN_GPIO_V_CAM2_D1V2_EN);
if (rc < 0) {
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_V_CAM2_D1V2_EN);
goto enable_s5k6a1gx_2nd_digital_fail;
}
gpio_direction_output(CAM_PIN_GPIO_V_CAM2_D1V2_EN, 1);
gpio_free(CAM_PIN_GPIO_V_CAM2_D1V2_EN);
msleep(1);
return rc;
enable_s5k6a1gx_2nd_digital_fail:
rc = gpio_request(CAM_PIN_GPIO_CAM2_RSTz, "s5k6a1gx");
if (rc < 0)
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_CAM2_RSTz);
else {
gpio_direction_output(CAM_PIN_GPIO_CAM2_RSTz, 0);
gpio_free(CAM_PIN_GPIO_CAM2_RSTz);
}
enable_s5k6a1gx_rst_fail:
rc = gpio_request(CAM_PIN_GPIO_V_CAMIO_1V8_EN, "V_CAMIO_1V8_EN");
if (rc < 0)
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_V_CAMIO_1V8_EN);
else {
gpio_direction_output(CAM_PIN_GPIO_V_CAMIO_1V8_EN, 0);
gpio_free(CAM_PIN_GPIO_V_CAMIO_1V8_EN);
}
enable_s5k6a1gx_io_fail:
camera_sensor_power_disable(reg_8038_l8);
enable_s5k6a1gx_analog_fail:
rc = gpio_request(CAM_PIN_GPIO_CAM_VCM_PD, "CAM_VCM_PD");
if (rc < 0)
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_CAM_VCM_PD);
else {
gpio_direction_output(CAM_PIN_GPIO_CAM_VCM_PD, 0);
gpio_free(CAM_PIN_GPIO_CAM_VCM_PD);
}
enable_s5k6a1gx_vcm_pd:
rc = gpio_request(CAM_PIN_GPIO_V_CAM_D1V8_EN, "V_CAM_D1V8_EN");
if (rc < 0)
pr_err("[CAM] GPIO(%d) request failed", CAM_PIN_GPIO_V_CAM_D1V8_EN);
else {
gpio_direction_output(CAM_PIN_GPIO_V_CAM_D1V8_EN, 0);
gpio_free(CAM_PIN_GPIO_V_CAM_D1V8_EN);
}
enable_s5k6a1gx_digital_fail:
camera_sensor_power_disable(reg_8038_l17);
enable_s5k6a1gx_vcm_fail:
return rc;
}
static int msm8930_s5k6a2ya_vreg_on(void)
{
int rc;
pr_info("[CAM] %s\n", __func__);
rc = camera_sensor_power_enable("8038_l17", 2850000, ®_8038_l17);
pr_info("[CAM] sensor_power_enable(\"8038_l17\", 2.85V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8038_l17\", 2.85V) FAILED %d\n", rc);
goto enable_s5k6a2ya_vcm_fail;
}
udelay(50);
rc = gpio_request(MSM_CAM_VCM_PD, "CAM_VCM_PD");
pr_info("[CAM] vcm pd gpio_request, %d\n", MSM_CAM_VCM_PD);
if (rc < 0) {
pr_err("[CAM] GPIO(%d) request failed", MSM_CAM_VCM_PD);
goto enable_s5k6a2ya_vcm_pd;
}
gpio_direction_output(MSM_CAM_VCM_PD, 1);
gpio_free(MSM_CAM_VCM_PD);
udelay(500);
rc = camera_sensor_power_enable("8038_l8", 2900000, ®_8038_l8);
pr_info("[CAM] sensor_power_enable(\"8038_l8\", 2.9V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8038_l8\", 2.9V) FAILED %d\n", rc);
goto enable_s5k6a2ya_analog_fail;
}
udelay(50);
rc = gpio_request(MSM_CAMIO_1V8_EN, "V_CAMIO_1V8_EN");
pr_info("[CAM] cam iogcaa gpio_request, %d\n", MSM_CAMIO_1V8_EN);
if (rc < 0) {
pr_err("[CAM] GPIO(%d) request failed", MSM_CAMIO_1V8_EN);
goto enable_s5k6a2ya_io_fail;
}
gpio_direction_output(MSM_CAMIO_1V8_EN, 1);
gpio_free(MSM_CAMIO_1V8_EN);
udelay(50);
rc = gpio_set (MSM_RAW_1V2_EN,1);
if (rc<0)
goto RAW_FAIL_1V2;
rc = gpio_request(MSM_CAM2_RSTz, "s5k6a2ya");
pr_info("[CAM] reset pin gpio_request, %d\n", MSM_CAM2_RSTz);
if (rc < 0) {
pr_err("[CAM] GPIO(%d) request failed", MSM_CAM2_RSTz);
goto enable_s5k6a2ya_rst_fail;
}
gpio_direction_output(MSM_CAM2_RSTz, 1);
gpio_free(MSM_CAM2_RSTz);
mdelay(1);
return rc;
enable_s5k6a2ya_rst_fail:
gpio_set (MSM_RAW_1V2_EN,0);
RAW_FAIL_1V2:
rc = gpio_request(MSM_CAMIO_1V8_EN, "V_CAMIO_1V8_EN");
if (rc < 0)
pr_err("[CAM] GPIO(%d) request failed", MSM_CAMIO_1V8_EN);
else {
gpio_direction_output(MSM_CAMIO_1V8_EN, 0);
gpio_free(MSM_CAMIO_1V8_EN);
}
enable_s5k6a2ya_io_fail:
camera_sensor_power_disable(reg_8038_l8);
enable_s5k6a2ya_analog_fail:
rc = gpio_request(MSM_CAM_VCM_PD, "CAM_VCM_PD");
if (rc < 0)
pr_err("[CAM] GPIO(%d) request failed", MSM_CAM_VCM_PD);
else {
gpio_direction_output(MSM_CAM_VCM_PD, 0);
gpio_free(MSM_CAM_VCM_PD);
}
enable_s5k6a2ya_vcm_pd:
#if 0
rc = gpio_request(MSM_V_CAM_D1V8_EN, "V_CAM_D1V8_EN");
if (rc < 0)
pr_err("[CAM] GPIO(%d) request failed", MSM_V_CAM_D1V8_EN);
else {
gpio_direction_output(MSM_V_CAM_D1V8_EN, 0);
gpio_free(MSM_V_CAM_D1V8_EN);
}
enable_s5k6a2ya_digital_fail:
#endif
camera_sensor_power_disable(reg_8038_l17);
enable_s5k6a2ya_vcm_fail:
return rc;
}
static int msm8930_mt9v113_vreg_on(void)
{
int rc;
pr_info("%s\n", __func__);
rc = camera_sensor_power_enable("8038_l17", 2800000, ®_8038_l17);
pr_info("sensor_power_enable(\"8038_l17\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("sensor_power_enable(\"8038_l17\", 2.8V) FAILED %d\n", rc);
goto enable_mt9v113_vcm_fail;
}
udelay(50);
rc = gpio_request(MSM_CAM2_RSTz, "mt9v113");
pr_info("reset pin gpio_request, %d\n", MSM_CAM2_RSTz);
if (rc < 0) {
pr_err("GPIO(%d) request failed", MSM_CAM2_RSTz);
goto enable_mt9v113_rst_fail;
}
gpio_direction_output(MSM_CAM2_RSTz, 1);
gpio_free(MSM_CAM2_RSTz);
mdelay(1);
rc = gpio_request(MSM_V_CAM_D1V8_EN, "V_CAM_D1V8_EN");
pr_info("digital gpio_request, %d\n", MSM_V_CAM_D1V8_EN);
if (rc < 0) {
pr_err("GPIO(%d) request failed", MSM_V_CAM_D1V8_EN);
goto enable_mt9v113_digital_fail;
}
gpio_direction_output(MSM_V_CAM_D1V8_EN, 1);
gpio_free(MSM_V_CAM_D1V8_EN);
mdelay(1);
rc = camera_sensor_power_enable("8038_l8", 2800000, ®_8038_l8);
pr_info("sensor_power_enable(\"8038_l8\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("sensor_power_enable(\"8038_l8\", 2.8V) FAILED %d\n", rc);
goto enable_mt9v113_analog_fail;
}
udelay(50);
rc = gpio_request(MSM_CAMIO_1V8_EN, "V_CAMIO_1V8_EN");
pr_info("cam io gpio_request, %d\n", MSM_CAMIO_1V8_EN);
if (rc < 0) {
pr_err("GPIO(%d) request failed", MSM_CAMIO_1V8_EN);
goto enable_mt9v113_io_fail;
}
gpio_direction_output(MSM_CAMIO_1V8_EN, 1);
gpio_free(MSM_CAMIO_1V8_EN);
udelay(50);
rc = gpio_request(MSM_CAM_VCM_PD, "CAM_VCM_PD");
pr_info("vcm pd gpio_request, %d\n", MSM_CAM_VCM_PD);
if (rc < 0 && rc != -EBUSY) {
pr_err("GPIO(%d) request failed", MSM_CAM_VCM_PD);
goto enable_mt9v113_vcm_pd_fail;
} else {
gpio_direction_output(MSM_CAM_VCM_PD, 1);
gpio_free(MSM_CAM_VCM_PD);
rc = 0;
}
return rc;
enable_mt9v113_vcm_pd_fail:
rc = gpio_request(MSM_CAMIO_1V8_EN, "V_CAMIO_1V8_EN");
if (rc < 0)
pr_err("GPIO(%d) request failed", MSM_CAMIO_1V8_EN);
else {
gpio_direction_output(MSM_CAMIO_1V8_EN, 0);
gpio_free(MSM_CAMIO_1V8_EN);
}
enable_mt9v113_io_fail:
camera_sensor_power_disable(reg_8038_l8);
enable_mt9v113_analog_fail:
rc = gpio_request(MSM_V_CAM_D1V8_EN, "V_CAM_D1V8_EN");
if (rc < 0)
pr_err("GPIO(%d) request failed", MSM_V_CAM_D1V8_EN);
else {
gpio_direction_output(MSM_V_CAM_D1V8_EN, 0);
gpio_free(MSM_V_CAM_D1V8_EN);
}
enable_mt9v113_digital_fail:
rc = gpio_request(MSM_CAM2_RSTz, "mt9v113");
if (rc < 0)
pr_err("GPIO(%d) request failed", MSM_CAM2_RSTz);
else {
gpio_direction_output(MSM_CAM2_RSTz, 0);
gpio_free(MSM_CAM2_RSTz);
}
enable_mt9v113_rst_fail:
camera_sensor_power_disable(reg_8038_l17);
enable_mt9v113_vcm_fail:
return rc;
}
static int villec2_rawchip_vreg_on(void)
{
int rc;
pr_info("[CAM] %s\n", __func__);
rc = camera_sensor_power_enable("8058_l14", 2850000, &villec2_reg_8058_l14);
pr_info("[CAM] sensor_power_enable(\"8058_l14\", 2.85V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] rawchip_power_enable(\"8058_l14\", 2.8V) FAILED %d\n", rc);
goto enable_VCM_fail;
}
rc = camera_sensor_power_enable("8058_l8", 1800000, &villec2_reg_8058_l8);
pr_info("[CAM] sensor_power_enable(\"8058_l8\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] rawchip_power_enable(\"8058_l8\", 1.8V) FAILED %d\n", rc);
goto enable_1v8_fail;
}
rc = gpio_request(VILLEC2_GPIO_V_CAM_D1V2_EN, "CAM_D1V2");
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"gpio %d\", 1.2V) FAILED %d\n", VILLEC2_GPIO_V_CAM_D1V2_EN, rc);
goto enable_1v2_fail;
}
gpio_direction_output(VILLEC2_GPIO_V_CAM_D1V2_EN, 1);
gpio_free(VILLEC2_GPIO_V_CAM_D1V2_EN);
rc = camera_sensor_power_enable("8058_l15", 2800000, &villec2_reg_8058_l15);
pr_info("[CAM] sensor_power_enable(\"8058_l15\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l15\", 2.8V) FAILED %d\n", rc);
goto enable_analog_fail;
}
votg_2_8v_switch = regulator_get(NULL, "8901_usb_otg");
if (IS_ERR(votg_2_8v_switch)) {
pr_err("[CAM] %s: unable to get votg_2_8v_switch\n", __func__);
goto enable_analog_fail;
}
if (regulator_enable(votg_2_8v_switch)) {
pr_err("[CAM] %s: Unable to enable the regulator: votg_2_8v_switch\n", __func__);
regulator_put(votg_2_8v_switch);
votg_2_8v_switch = NULL;
goto enable_analog_fail;
}
msleep(1);
rc = camera_sensor_power_enable("8058_l9", 1800000, &villec2_reg_8058_l9);
pr_info("[CAM] sensor_power_enable(\"8058_l9\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l9\", 2.8V) FAILED %d\n", rc);
goto lcmio_hi_fail;
}
config_rawchip_on_gpios();
rc = gpio_request(VILLEC2_GPIO_MCLK_SWITCH, "CAM_SEL");
if (rc < 0)
{
pr_err("[CAM] GPIO (%d) request fail\n", VILLEC2_GPIO_MCLK_SWITCH);
goto lcmio_hi_fail;
}
gpio_direction_output(VILLEC2_GPIO_MCLK_SWITCH, 0);
gpio_free(VILLEC2_GPIO_MCLK_SWITCH);
return rc;
lcmio_hi_fail:
camera_sensor_power_disable(villec2_reg_8058_l9);
enable_analog_fail:
gpio_request(VILLEC2_GPIO_V_CAM_D1V2_EN, "CAM_D1V2_EN");
gpio_direction_output(VILLEC2_GPIO_V_CAM_D1V2_EN, 0);
gpio_free(VILLEC2_GPIO_V_CAM_D1V2_EN);
enable_1v2_fail:
camera_sensor_power_disable(villec2_reg_8058_l8);
enable_1v8_fail:
camera_sensor_power_disable(villec2_reg_8058_l14);
enable_VCM_fail:
return rc;
}
static int Villec2_mt9v113_vreg_on(void)
{
int rc = 0;
pr_info("[CAM] %s\n", __func__);
rc = camera_sensor_power_enable("8058_l14", 2850000, &villec2_reg_8058_l14);
pr_info("[CAM] sensor_power_enable(\"8058_l14\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l14\", 2.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l8", 1800000, &villec2_reg_8058_l8);
pr_info("[CAM] sensor_power_enable(\"8058_l8\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l8\", 1.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l15", 2800000, &villec2_reg_8058_l15);
pr_info("[CAM] sensor_power_enable(\"8058_l15\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l15\", 2.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l9", 1800000, &villec2_reg_8058_l9);
pr_info("[CAM] sensor_power_enable(\"8058_l9\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l9\", 1.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
pr_info("[CAM] Do Reset pin On\n");
rc = gpio_request(VILLEC2_GPIO_CAM2_RSTz, "mt9v113");
if (rc < 0) {
pr_err("[CAM] %s:VILLEC2_GPIO_CAM2_RSTz gpio %d request failed, rc=%d\n", __func__, VILLEC2_GPIO_CAM2_RSTz, rc);
goto init_fail;
}
gpio_direction_output(VILLEC2_GPIO_CAM2_RSTz, 1);
msleep(2);
gpio_free(VILLEC2_GPIO_CAM2_RSTz);
udelay(50);
villec2_config_camera_on_gpios();
rc = gpio_request(VILLEC2_GPIO_MCLK_SWITCH, "CAM_SEL");
if (rc < 0)
{
pr_err("[CAM] GPIO (%d) request fail\n", VILLEC2_GPIO_MCLK_SWITCH);
goto init_fail;
}
gpio_direction_output(VILLEC2_GPIO_MCLK_SWITCH, 1);
gpio_free(VILLEC2_GPIO_MCLK_SWITCH);
init_fail:
return rc;
}
static int Ruby_mt9d015_vreg_on(void)
{
int rc = 0;
pr_info("[CAM] %s\n", __func__);
if (system_rev >= 3)
rc = camera_sensor_power_enable("8058_l8", 2850000, &ruby_reg_8058_l8);
else
rc = camera_sensor_power_enable("8058_l10", 2850000, &ruby_reg_8058_l10);
pr_info("[CAM] sensor_power_enable(\"8058_l10\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l10\", 2.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l24", 1200000, &ruby_reg_8058_l24);
pr_info("[CAM] sensor_power_enable(\"8058_l24\", 1.2V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l24\", 1.2V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l9", 1800000, &ruby_reg_8058_l9);
pr_info("[CAM] sensor_power_enable(\"8058_l9\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l9\", 1.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l15", 2800000, &ruby_reg_8058_l15);
pr_info("[CAM] sensor_power_enable(\"8058_l15\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l15\", 2.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l12", 1800000, &ruby_reg_8058_l12);
pr_info("[CAM] sensor_power_enable(\"8058_l12\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l12\", 1.8V) FAILED %d\n", rc);
goto init_fail;
}
pr_info("[CAM] Do Reset pin On\n");
rc = gpio_request(RUBY_CAM2_RSTz, "mt9d015");
if (rc < 0) {
pr_err("[CAM] %s:RUBY_CAM2_RSTz gpio %d request failed, rc=%d\n", __func__, RUBY_CAM2_RSTz, rc);
goto init_fail;
}
gpio_direction_output(RUBY_CAM2_RSTz, 1);
msleep(2);
gpio_free(RUBY_CAM2_RSTz);
udelay(50);
ruby_config_camera_on_gpios();
rc = gpio_request(RUBY_GPIO_MCLK_SWITCH, "CAM_SEL");
if (rc < 0)
{
pr_err("[CAM] GPIO (%d) request fail\n", RUBY_GPIO_MCLK_SWITCH);
goto init_fail;
}
gpio_direction_output(RUBY_GPIO_MCLK_SWITCH, 1);
gpio_free(RUBY_GPIO_MCLK_SWITCH);
init_fail:
return rc;
}
static int pyramid_s5k3h1gx_vreg_on(void)
{
static int first_run = 1;
int rc = 0;
pr_info("[CAM] %s\n", __func__);
if (first_run == 1) {
first_run = 0;
config_gpio_table(camera_on_gpio_table_workaround,
ARRAY_SIZE(camera_on_gpio_table_workaround));
mdelay(10);
rc = camera_sensor_power_enable("8058_l10", 2850000, &pyramid_reg_8058_l10);
pr_info("[CAM] sensor_power_enable(\"8058_l10\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l10\", 2.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l12", 1800000, &pyramid_reg_8058_l12);
pr_info("[CAM] sensor_power_enable(\"8058_l12\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l12\", 1.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l15", 2800000, &pyramid_reg_8058_l15);
pr_info("[CAM] sensor_power_enable(\"8058_l15\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l15\", 2.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l9", 1800000, &pyramid_reg_8058_l9);
pr_info("[CAM] sensor_power_enable(\"8058_l9\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l9\", 1.8V) FAILED %d\n", rc);
goto init_fail;
}
mdelay(20);
rc = camera_sensor_power_disable(pyramid_reg_8058_l9);
pr_info("[CAM] camera_sensor_power_disable(\"8058_l9\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_disable(\"8058_l9\") FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_disable(pyramid_reg_8058_l15);
pr_info("[CAM] camera_sensor_power_disable(\"8058_l15\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_disable(\"8058_l15\") FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_disable(pyramid_reg_8058_l12);
pr_info("[CAM] camera_sensor_power_disable(\"8058_l12\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_disable(\"8058_l12\") FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
pr_info("[CAM] camera_sensor_power_disable(\"8058_l10\", 2.8V) == %d\n", rc);
rc = camera_sensor_power_disable(pyramid_reg_8058_l10);
if (rc < 0) {
pr_err("[CAM] sensor_power_disable(\"8058_l10\") FAILED %d\n", rc);
goto init_fail;
}
mdelay(20);
}
rc = camera_sensor_power_enable("8058_l10", 2850000, &pyramid_reg_8058_l10);
pr_info("[CAM] sensor_power_enable(\"8058_l10\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l10\", 2.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l12", 1800000, &pyramid_reg_8058_l12);
pr_info("[CAM] sensor_power_enable(\"8058_l12\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l12\", 1.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l15", 2800000, &pyramid_reg_8058_l15);
pr_info("[CAM] sensor_power_enable(\"8058_l15\", 2.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l15\", 2.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8058_l9", 1800000, &pyramid_reg_8058_l9);
pr_info("[CAM] sensor_power_enable(\"8058_l9\", 1.8V) == %d\n", rc);
if (rc < 0) {
pr_err("[CAM] sensor_power_enable(\"8058_l9\", 1.8V) FAILED %d\n", rc);
goto init_fail;
}
pyramid_config_camera_on_gpios();
init_fail:
return rc;
}
static int ville_mt9v113_vreg_on(void)
{
int rc;
pr_info("%s\n", __func__);
rc = camera_sensor_power_enable("8921_l9", 2800000, ®_8921_l9);
if (rc < 0) {
pr_err("sensor_power_enable(\"8921_l9\", 2.8V) FAILED %d\n", rc);
goto init_fail;
}
udelay(50);
rc = camera_sensor_power_enable("8921_lvs6", 1800000, ®_8921_lvs6);
pr_info("sensor_power_enable(\"8921_lvs6\", 1.8V) == %d\n", rc);
if (rc < 0)
goto init_fail;
udelay(50);
rc = camera_sensor_power_enable("8921_l8", 2800000, ®_8921_l8);
pr_info("sensor_power_enable(\"8921_l8\", 2.8V) == %d\n", rc);
if (rc < 0)
goto init_fail;
udelay(50);
rc = gpio_request(VILLE_GPIO_V_LCMIO_1V8_EN, "CAM_D1V8_EN");
pr_info("ville_mt9v113_vreg_on %d 1v8\n", VILLE_GPIO_V_LCMIO_1V8_EN);
if (rc < 0) {
pr_err("%s:GPIO_CAM_D1V8_EN gpio %d request failed, rc=%d\n", __func__, VILLE_GPIO_V_LCMIO_1V8_EN, rc);
goto init_fail;
}
gpio_direction_output(VILLE_GPIO_V_LCMIO_1V8_EN, 1);
gpio_free(VILLE_GPIO_V_LCMIO_1V8_EN);
udelay(50);
rc = gpio_request(VILLE_GPIO_CAM2_RSTz, "mt9v113");
if (rc < 0) {
pr_err("%s:VILLE_GPIO_CAM2_RSTz gpio %d request failed, rc=%d\n", __func__, VILLE_GPIO_CAM2_RSTz, rc);
goto init_fail;
}
gpio_direction_output(VILLE_GPIO_CAM2_RSTz, 1);
msleep(2);
gpio_free(VILLE_GPIO_CAM2_RSTz);
udelay(50);
init_fail:
return rc;
}
static int ville_csi_vreg_on(void)
{
pr_info("%s\n", __func__);
return camera_sensor_power_enable("8921_l2", 1200000, ®_8921_l2);
}
static int ville_rawchip_vreg_on(void)
{
int rc;
pr_info("%s\n", __func__);
rc = camera_sensor_power_enable("8921_l9", 2800000, ®_8921_l9);
if (rc < 0) {
pr_err("rawchip_power_enable(\"8921_l9\", 2.8V) FAILED %d\n", rc);
goto enable_VCM_fail;
}
rc = camera_sensor_power_enable("8921_lvs6", 1800000, ®_8921_lvs6);
if (rc < 0) {
pr_err("rawchip_power_enable(\"8921_lvs6\", 1.8V) FAILED %d\n", rc);
goto enable_1v8_fail;
}
mdelay(5);
rc = gpio_request(VILLE_GPIO_V_CAM_D1V2_EN, "CAM_D1V2_EN");
if (rc < 0) {
pr_err("sensor_power_enable(\"gpio %d\", 1.2V) FAILED %d\n", VILLE_GPIO_V_CAM_D1V2_EN, rc);
goto enable_1v2_fail;
}
gpio_direction_output(VILLE_GPIO_V_CAM_D1V2_EN, 1);
gpio_free(VILLE_GPIO_V_CAM_D1V2_EN);
rc = camera_sensor_power_enable("8921_l8", 2800000, ®_8921_l8);
if (rc < 0) {
pr_err("sensor_power_enable(\"8921_l8\", 2.8V) FAILED %d\n", rc);
goto enable_analog_fail;
}
rc = gpio_request(VILLE_GPIO_V_LCMIO_1V8_EN, "CAM_D1V8_EN");
if (rc < 0) {
pr_err("%s:GPIO_CAM_D1V8_EN gpio %d request failed, rc=%d\n", __func__, VILLE_GPIO_V_LCMIO_1V8_EN, rc);
goto lcmio_hi_fail;
}
gpio_direction_output(VILLE_GPIO_V_LCMIO_1V8_EN, 1);
gpio_free(VILLE_GPIO_V_LCMIO_1V8_EN);
return rc;
lcmio_hi_fail:
camera_sensor_power_disable(reg_8921_l8);
enable_analog_fail:
gpio_request(VILLE_GPIO_V_CAM_D1V2_EN, "CAM_D1V2_EN");
gpio_direction_output(VILLE_GPIO_V_CAM_D1V2_EN, 0);
gpio_free(VILLE_GPIO_V_CAM_D1V2_EN);
enable_1v2_fail:
camera_sensor_power_disable(reg_8921_lvs6);
enable_1v8_fail:
camera_sensor_power_disable(reg_8921_l9);
enable_VCM_fail:
return rc;
}
