C++ (Cpp) charging_full_check примеры использования

Пример #1

Файл: switch_charging.c Проект: yangxianting/mediatek

PMU_STATUS BAT_BatteryFullAction(void)
{
    battery_xlog_printk(BAT_LOG_CRTI, "[BATTERY] Battery full !!\n\r");            
    
    BMT_status.bat_full = KAL_TRUE;
    BMT_status.total_charging_time = 0;
    BMT_status.PRE_charging_time = 0;
    BMT_status.CC_charging_time = 0;
    BMT_status.TOPOFF_charging_time = 0;
    BMT_status.POSTFULL_charging_time = 0;
	BMT_status.bat_in_recharging_state = KAL_FALSE;

	if(charging_full_check() == KAL_FALSE)
    {
        battery_xlog_printk(BAT_LOG_CRTI, "[BATTERY] Battery Re-charging !!\n\r");                

		BMT_status.bat_in_recharging_state = KAL_TRUE;
        BMT_status.bat_charging_state = CHR_CC;
		battery_meter_reset();
    }
	else
	{
		if(need_recharge_check())
		{
			kal_uint32 charging_enable = 2;
			  battery_charging_control(CHARGING_CMD_ENABLE,&charging_enable); // 这里进行了扩展,2相当于先复位,然后在置位 苏 勇 2014年05月19日 09:56:24
		}
	}
           
  
    return PMU_STATUS_OK;
}

Пример #2

Файл: linear_charging.c Проект: ariafan/j509_fly

PMU_STATUS BAT_TopOffModeAction(void)
{
	kal_uint32 charging_enable = KAL_FALSE;
	
    battery_xlog_printk(BAT_LOG_CRTI, "[BATTERY] Top Off mode charge, timer=%ld on %ld !!\n\r", BMT_status.TOPOFF_charging_time, BMT_status.total_charging_time);    

    BMT_status.PRE_charging_time = 0;
    BMT_status.CC_charging_time = 0;
    BMT_status.TOPOFF_charging_time += BAT_TASK_PERIOD;
    BMT_status.total_charging_time += BAT_TASK_PERIOD;                    

    pchr_turn_on_charging();

	if ((BMT_status.TOPOFF_charging_time >= MAX_CV_CHARGING_TIME) || (charging_full_check() == KAL_TRUE) )
    {
        BMT_status.bat_charging_state = CHR_BATFULL;
		BMT_status.bat_full = KAL_TRUE;
		g_charging_full_reset_bat_meter = KAL_TRUE;

		 /*  Disable charging */
		battery_charging_control(CHARGING_CMD_ENABLE,&charging_enable);
    }

    return PMU_STATUS_OK;        
} 

Пример #3

Файл: linear_charging.c Проект: hacknmtk/android_kernel_alcatel_5017

PMU_STATUS BAT_TopOffModeAction(void)
{
	kal_uint32 charging_enable = KAL_FALSE;
#ifdef HIGH_BATTERY_VOLTAGE_SUPPORT
	kal_uint32 cv_voltage = 4350;
#else
	kal_uint32 cv_voltage = 4200;
#endif

	battery_log(BAT_LOG_CRTI, "[BATTERY] Top Off mode charge, timer=%d on %d !!\n\r",
			    BMT_status.TOPOFF_charging_time, BMT_status.total_charging_time);

	BMT_status.PRE_charging_time = 0;
	BMT_status.CC_charging_time = 0;
	BMT_status.TOPOFF_charging_time += BAT_TASK_PERIOD;
	BMT_status.total_charging_time += BAT_TASK_PERIOD;


	if(BMT_status.bat_vol > (cv_voltage-CV_CHECK_DELAT_FOR_BANDGAP)) {	/* CV - 0.08V */
		pchr_sw_cv_charing_current_check();
	}
	pchr_turn_on_charging();

	if ((BMT_status.TOPOFF_charging_time >= MAX_CV_CHARGING_TIME)
	    || (charging_full_check() == KAL_TRUE)) {
		BMT_status.bat_charging_state = CHR_BATFULL;
		BMT_status.bat_full = KAL_TRUE;
		g_charging_full_reset_bat_meter = KAL_TRUE;

		/*  Disable charging */
		battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
	}

	return PMU_STATUS_OK;
}

Пример #4

Файл: switch_charging.c Проект: yangxianting/mediatek

PMU_STATUS BAT_ConstantCurrentModeAction(void)
{
    battery_xlog_printk(BAT_LOG_CRTI, "[BATTERY] CC mode charge, timer=%ld on %ld !!\n\r", BMT_status.CC_charging_time, BMT_status.total_charging_time);    

    BMT_status.PRE_charging_time = 0;
    BMT_status.CC_charging_time += BAT_TASK_PERIOD;
    BMT_status.TOPOFF_charging_time = 0;
    BMT_status.total_charging_time += BAT_TASK_PERIOD;

    /*  Enable charger */
    pchr_turn_on_charging();     

	if(charging_full_check() == KAL_TRUE)
	{
	    BMT_status.bat_charging_state = CHR_BATFULL;
		BMT_status.bat_full = KAL_TRUE;
		g_charging_full_reset_bat_meter = KAL_TRUE;
	}	
    	
    return PMU_STATUS_OK;        
}    

Пример #5

Файл: switch_charging.c Проект: AudioGod/MediaTek-HelioX10-Kernel

PMU_STATUS BAT_BatteryFullAction(void)
{
	battery_xlog_printk(BAT_LOG_CRTI, "[BATTERY] Battery full !!\n\r");

	BMT_status.bat_full = KAL_TRUE;
	BMT_status.total_charging_time = 0;
	BMT_status.PRE_charging_time = 0;
	BMT_status.CC_charging_time = 0;
	BMT_status.TOPOFF_charging_time = 0;
	BMT_status.POSTFULL_charging_time = 0;
	BMT_status.bat_in_recharging_state = KAL_FALSE;

	if (charging_full_check() == KAL_FALSE) {
		battery_xlog_printk(BAT_LOG_CRTI, "[BATTERY] Battery Re-charging !!\n\r");

		BMT_status.bat_in_recharging_state = KAL_TRUE;
		BMT_status.bat_charging_state = CHR_CC;
		battery_meter_reset();
	}


	return PMU_STATUS_OK;
}