int ProcessingRestrictions::checkTransaction (byte termCap,
byte transType,
byte dom_trans,
byte inter_truns,
byte auc,
bool IsCountryCodeMatch)
{
if (check_bit(termCap, transType))
{
if (IsCountryCodeMatch)
{
// Issuer Country Code == Term Country Code
if (!check_bit(auc, dom_trans)) // Is Not Vaild for Domestic Transactions
{
// Condition is not satisfied
return EMV_CONDITIONS_NOT_SATISFIED;
}
}
else
{
// Issuer Country Code != Term Country Code
if (!check_bit(auc, inter_truns)) // Is Not Vaild for International Transactions
{
// Condition is not satisfied
return EMV_CONDITIONS_NOT_SATISFIED;
}
}
}
return SUCCESS;
}
int main(){
uint8_t rd_buf[1];
char str[6];
// Initialize UART
UART_Init(MY_UBRR);
init_twi();
sei();
init_LSM6DS3();
rd_buf[0] = check_bit(CTRL9_XL,SOFT_EN);
sprintf(str,"%02X\r\n",rd_buf[0]);
UART_Transmit_String(str);
set_bits(CTRL9_XL, SOFT_EN);
rd_buf[0] = check_bit(CTRL9_XL,SOFT_EN);
sprintf(str,"%02X\r\n",rd_buf[0]);
UART_Transmit_String(str);
clear_bits(CTRL9_XL, SOFT_EN);
rd_buf[0] = check_bit(CTRL9_XL,SOFT_EN);
sprintf(str,"%02X\r\n",rd_buf[0]);
UART_Transmit_String(str);
return 0;
}
int main(void)
{
int timer = 0;
int x;
int y;
char str1[16];
char str2[16];
clear_bit(DDRD,5);
clear_bit(DDRD,4);
set_bit(DDRB,7);
set_bit(PORTD,5);
set_bit(PORTD,4);
set_bit(PORTB,7);
LCDInit();
ADCInit();
sei();
LCDClear();
while(1)
{
timer ++;
if (timer >= 1000) {
timer = 0;
if(!check_bit(PIND,5))
{
}
if(!check_bit(PIND,4))
{
}
}
}
}
int main(void)
{
// The following line sets bit 5 HIGH in register DDRD
set_bit(DDRD,5); // Pin PD5 is now configured as an OUTPUT
set_bit(DDRD,6); // Pin PD6 is now configured as an OUTPUT
// The following line sets bit 0 LOW in register DDRF
clear_bit(DDRF,0); // Pin PF0 is now configured as an INPUT
set_bit(PORTF,0); // Turn on internal pullups for PF0
while(1)
{
// PINF is the register you have to read to check if a particular
// pin on port F (PFx) is HIGH or LOW
if(check_bit(PINF,0))
{
// If PF0 is HIGH, toggle pin PD5's output status
toggle_bit(PORTD,5);
}
else
{
// If PF0 is LOW, toggle pin PD6's output status
toggle_bit(PORTD,6);
}
_delay_ms(1000); // Delay 1 second before checking PF0 again
}
return 0;
}
inline Value SimpleBitVector::inline_aset(INDEX i, Value new_value)
{
if (i >= _capacity)
return bad_index(i);
inline_setbit(i, check_bit(new_value));
return new_value;
}
static
void
release_mutex_no(unsigned no)
{
Guard g(&g_mutex_no_mutex);
assert(check_bit(&g_mutex_no_mask, no));
clear_bit(&g_mutex_no_mask, no);
}
// Reverse and flip the bits from i = 0 to i = end
void reverse_and_flip_bits(int A[], int end) {
for (int i = 0; i < (end / 2); i++) {
int temp = check_bit(A, i);
if (check_bit(A, end - i - 1)) {
set_bit(A, i);
} else {
clear_bit(A, i);
}
if (temp) {
set_bit(A, end - i - 1);
} else {
clear_bit(A, end - i - 1);
}
}
for (int i = 0; i < end; i++) {
flip_bit(A, i);
}
}
void
ndb_mutex_destoyed(NdbMutex* p)
{
unsigned no = p->m_mutex_state->m_no;
/**
* In order to be able to reuse mutex_no,
* we need to clear this no from all mutexes that has it in before map...
* this is all mutexes in after map
*/
for (unsigned i = 0; i<p->m_mutex_state->m_locked_after_list.m_used; i++)
{
NdbMutex * m = get_element(&p->m_mutex_state->m_locked_after_list, i);
assert(check_bit(&p->m_mutex_state->m_locked_after_mask, m->m_mutex_state->m_no));
/**
* And we need to lock it while doing this
*/
NdbMutex_Lock(m);
assert(check_bit(&m->m_mutex_state->m_locked_before_mask, no));
clear_bit(&m->m_mutex_state->m_locked_before_mask, no);
remove_mutex_from_array(&m->m_mutex_state->m_locked_before_list, p);
NdbMutex_Unlock(m);
}
/**
* And we need to remove ourselfs from after list of mutexes in out before list
*/
for (unsigned i = 0; i<p->m_mutex_state->m_locked_before_list.m_used; i++)
{
NdbMutex * m = get_element(&p->m_mutex_state->m_locked_before_list, i);
NdbMutex_Lock(m);
assert(check_bit(&m->m_mutex_state->m_locked_after_mask, no));
clear_bit(&m->m_mutex_state->m_locked_after_mask, no);
remove_mutex_from_array(&m->m_mutex_state->m_locked_after_list, p);
NdbMutex_Unlock(m);
}
release(&p->m_mutex_state->m_locked_before_mask);
release(&p->m_mutex_state->m_locked_before_list);
release(&p->m_mutex_state->m_locked_after_mask);
release(&p->m_mutex_state->m_locked_after_list);
release_mutex_no(no);
}
AbstractVector * SimpleBitVector::adjust_vector(INDEX new_capacity,
Value initial_element,
Value initial_contents)
{
if (initial_contents != NIL)
{
SimpleBitVector * bv = new_simple_bit_vector(new_capacity);
if (listp(initial_contents))
{
Value list = initial_contents;
for (INDEX i = 0; i < new_capacity; i++)
{
bv->inline_setbit(i, check_bit(car(list)));
list = xcdr(list);
}
}
else if (vectorp(initial_contents))
{
AbstractVector * v = the_vector(initial_contents);
for (INDEX i = 0; i < new_capacity; i++)
bv->inline_setbit(i, check_bit(v->aref(i)));
}
else
signal_type_error(initial_contents, S_sequence);
return bv;
}
if (_capacity != new_capacity)
{
SimpleBitVector * bv = new_simple_bit_vector(new_capacity);
INDEX limit = (_capacity < new_capacity) ? _capacity : new_capacity;
for (INDEX i = 0; i < limit; i++)
bv->inline_setbit(i, inline_getbit(i));
if (_capacity < new_capacity)
{
BIT bit = check_bit(initial_element);
for (INDEX i = _capacity; i < new_capacity; i++)
bv->inline_setbit(i, bit);
}
return bv;
}
// no change
return this;
}
void fighter::ai()
{
if(check_bit(attributes, DEAD) || check_bit(attributes, FRIENDLY))
return;
calc_lightmap();
int targetx, targety;
if(lightmap->data[curr_level->guy->y][curr_level->guy->x] == 1)
{
targetx = curr_level->guy->x;
targety = curr_level->guy->y;
}
else
{
return;
// targetx = x;
// targety = y;
}
if(a_star(targetx, targety))
{
if(is_monster(moves[0]->x, moves[0]->y))
{
int monst = is_monster(moves[0]->x, moves[0]->y) - 1;
attack_something(curr_level->monsters[monst]);
}
if(curr_level->guy->x == moves[0]->x && curr_level->guy->y == moves[0]->y)
attack_something(curr_level->guy);
if(good_move(moves[0]->x, moves[0]->y))
{
x = moves[0]->x;
y = moves[0]->y;
}
while(moves.size() > 0)
moves.erase(moves.begin());
}
return;
}
// This function determines whether or not the terminal is ATM.
// This check is performed based on the rule specified in
// EMV book 4 (Cardholder, Attendant and Acquirer Interface Requirements),
// Annex A, A1.
// Terminal types '14', '15', and '16' with cash disbursment capability
//(Additional terminal capabilities, byte 1, 'cash' bit = '1') are considered
// to be ATMs. All other terminal types are not considered to be ATMs.
bool ProcessingRestrictions::IsATM(DataObject *dob_TermType,
DataObject *dob_TermCap)
{
if (((dob_TermType->Data[0] == 0x14) ||
(dob_TermType->Data[0] == 0x15) ||
(dob_TermType->Data[0] == 0x16)) &&
check_bit(dob_TermCap->Data [0], 0x80))
return true;
else
return false;
}
void print_footprint(int foot_print)
{
printf ("footprint: ");
int j;
for (j = 0; j < nitems; ++j){
if (check_bit(j, foot_print)){
printf ("%d ", weight[j]);
}
}
printf ("\n");
}
int check_is_null(pnArray null_struct, int index)
{
if(!null_struct || index < 0 || index > null_struct->len) {
debug("parameter error: null parameter");
return ERR ;
}
if(1==check_bit(null_struct->map,index,null_struct->len*8)) {
return index ;
}
return ERR ;
}
int knapsack_bruteforce()
{
int i, kinds = pow(2, nitems);
int max_value = 0, foot_print = 0;
for (i = 0; i < kinds; ++i){
int j, weight_sum = 0, value_sum = 0;
for (j = 0; j < nitems; ++j){
weight_sum += weight[j] * check_bit(j, i);
value_sum += value[j] * check_bit(j, i);
}
if (weight_sum <= knapsacksize && value_sum > max_value){
max_value = value_sum;
foot_print = i;
}
}
/// print_footprint(foot_print);
return max_value;
}
static
void
add_lock_to_mutex_after_list(ndb_mutex_state * m1, NdbMutex* m2)
{
assert(m1 != m2->m_mutex_state);
unsigned no = m2->m_mutex_state->m_no;
if (!check_bit(&m1->m_locked_after_mask, no))
{
set_bit(&m1->m_locked_after_mask, no);
add_mutex_to_array(&m1->m_locked_after_list, m2);
}
}
void SimpleBitVector::fill(Value value)
{
const BIT bit = check_bit(value);
INDEX size = _capacity >> BIT_VECTOR_SHIFT;
if ((_capacity & BIT_VECTOR_MASK) != 0)
++size;
if (bit == 0)
for (INDEX i = size; i-- > 0;)
_data[i] = 0;
else
for (INDEX i = size; i-- > 0;)
_data[i] = 0xffffffff;
}
void* allocate()
{
unsigned short shortfull = 65535; // (2^16)
// ersten nicht vollen short finden
int i;
int current_short = -1;
int current_bit;
for (i=0; i < (NUM_BLOCKS/16); i++)
{
if (allocated_map[i] < shortfull)
{
current_short = i;
break; // for schleife verlassen
}
}
// kein freies short gefunden --> Nullpointer returnen
if (current_short == -1)
{
fprintf(stderr, "Warning: Arena full!\n");
return (void*) 0;
}
// sonst weiter mit freiem short!
// freies bit finden & 1 setzen
for (i=0; i<16; i++)
{
if(!check_bit(&allocated_map[current_short],i)) // erste 0 finden
{
current_bit = i;
set_bit(&allocated_map[current_short],current_bit);
break;
}
}
// entsprechenden pointer in arena finden
int offset = 16*current_short + current_bit;
// pointer returnen
printf("[info] allocated block: %d/%d [%ld]\n", current_short, current_bit, (long)(&arena[offset*BLOCKSIZE]));
return &arena[offset*BLOCKSIZE];
}
int
Array_Sort<elemType>::
find( const elemType &val )
{
int low = 0;
int high = Array<elemType>::_size-1;
check_bit();
while ( low <= high )
{
int mid = ( low + high )/2;
if ( val == _ia[ mid ])
return mid;
if ( val < _ia[ mid ] )
high = mid-1;
else low = mid+1;
}
return -1;
}
void
ndb_mutex_locked(NdbMutex* p)
{
ndb_mutex_state * m = p->m_mutex_state;
ndb_mutex_thr_state * thr = get_thr();
if (thr == 0)
{
/**
* These are threads not started with NdbThread_Create(...)
* e.g mysql-server threads...ignore these for now
*/
return;
}
for (unsigned i = 0; i < thr->m_mutexes_locked.m_used; i++)
{
/**
* We want to lock m
* Check that none of the mutex we curreny have locked
* have m in their *before* list
*/
NdbMutex * h = get_element(&thr->m_mutexes_locked, i);
if (check_bit(&h->m_mutex_state->m_locked_before_mask, m->m_no))
{
abort();
}
/**
* Add h to m's list of before-locks
*/
add_lock_to_mutex_before_list(m, h);
/**
* Add m to h's list of after locks
*/
add_lock_to_mutex_after_list(h->m_mutex_state, p);
}
add_lock_to_thread(thr, p);
}
static
unsigned
alloc_mutex_no()
{
Guard g(&g_mutex_no_mutex);
unsigned no = 0;
for (unsigned i = 0; i < g_mutex_no_mask.m_len; i++)
{
if (g_mutex_no_mask.m_mask[i] != 255)
{
no = (8 * i) + ff(g_mutex_no_mask.m_mask[i]);
goto found;
}
}
no = 8 * g_mutex_no_mask.m_len;
found:
set_bit(&g_mutex_no_mask, no);
assert(check_bit(&g_mutex_no_mask, no));
return no;
}
/******************************************************************
* calculation server
* delivers positions in string format which can be sent easily
* over a communication line to the calculation client.
* if plalist = 0, only SUN .. CHIRON are delivered, no LILITH
******************************************************************/
int calcserv(int id, /* request id, random number to prevent phase err */
double jd_ad, /* time as relative Astrodienst julian date */
int flag, /* a set of CALC_BIT_ bitflags */
int plalist,/* bit list of planets to be computed, 0 = all */
char *so) /* output string, MUST BE LONG ENOUGH (800 bytes)*/
{
int p, planet, so_len;
double rlng, rrad, rlat, rspeed, rau[CALC_N];
centisec lcs[CALC_N], lpcs[CALC_N], betcs[CALC_N];
char s[AS_MAXCH];
if (plalist == 0) plalist = (1 << 13) - 1; /* sun .. chiron */;
/*
* flag determines whether deltat is added to t;
* if CALC_BIT_EPHE is set, jd_ad is considered as ephemeris time,
* otherwise as universal time.
*/
if ((flag & CALC_BIT_EPHE) == 0) {
jd_ad += deltat (jd_ad);
}
for (p = SUN; p < CALC_N; p++) {
if (! check_bit(plalist, p)) continue;
if (calc (p, jd_ad, flag, &rlng, &rrad, &rlat, &rspeed) == OK) {
lcs [p] = swe_d2l (rlng * DEG);
lpcs [p] = swe_d2l (rspeed * DEG);
betcs [p] = swe_d2l (rlat * DEG);
rau [p] = rrad;
} else {
sprintf(so,"error at planet %d", p);
return ( ERR);
}
}
/*
* format comma separated list: id,teph,flag,plalist,ekl,nut
* double is given with 8 digits precision after decimal point,
* all angles are given in centiseconds.
* then for each requested planet: longitude (csec)
* then for each requested planet, if wanted: speed (csec/day)
* then for each requested planet, if wanted: latitude (csec)
* then for each requested planet, if wanted: rgeo (units 0..999)
* then for each requested planet, if wanted: rau (A.U.)
*/
sprintf (so, "%d,%.8f,%d,%d,%d,%d", id, jd_ad, flag, plalist,
swe_d2l(ekl * DEG), swe_d2l (nut * DEG) );
so_len = strlen (so);
for (planet = SUN; planet < CALC_N; planet++) {
if (! check_bit(plalist, planet)) continue;
sprintf (s ,",%d", lcs[planet]);
strcat (so + so_len, s);
so_len += strlen (s);
}
if (flag & CALC_BIT_SPEED) {
for (planet = SUN; planet < CALC_N; planet++) {
if (! check_bit(plalist, planet)) continue;
sprintf (s ,",%d", lpcs[planet]);
strcat (so + so_len, s);
so_len += strlen (s);
}
}
if (flag & CALC_BIT_BETA) {
for (planet = SUN; planet < CALC_N; planet++) {
if (! check_bit(plalist, planet)) continue;
sprintf (s ,",%d", betcs[planet]);
strcat (so + so_len, s);
so_len += strlen (s);
}
}
if (flag & CALC_BIT_RGEO) {
for (planet = SUN; planet < CALC_N; planet++) {
if (! check_bit(plalist, planet)) continue;
sprintf (s ,",%d", rel_geo(planet,rau[planet]));
strcat (so + so_len, s);
so_len += strlen (s);
}
}
if (flag & CALC_BIT_RAU) {
for (planet = SUN; planet < CALC_N; planet++) {
if (! check_bit(plalist, planet)) continue;
sprintf (s ,",%.8f", rau[planet]);
strcat (so + so_len, s);
so_len += strlen (s);
}
}
return (OK);
} /* end calcserv */
/* //move, because it would be boring otherwise
void fungus::move(int x_change, int y_change)
{
a=x;
b=y;
x += x_change;
y += y_change;
}
*/
void fungus::ai()
{
if(check_bit(attributes, DEAD))// || check_bit(attributes, FRIENDLY))
return;
other_count++;
if(other_count == 6)
{
other_count = 0;
set_bit(attributes, ASLEEP);
return;
}
if(hp < hp_old)
{
for(unsigned int i=0; i<curr_level->monsters.size(); i++)
if(curr_level->monsters[i]->type == type && curr_level->monsters[i]->x >= x-1 && curr_level->monsters[i]->x <= x+1 && curr_level->monsters[i]->y >= y-1 && curr_level->monsters[i]->y <= y+1)
{
unset_bit(curr_level->monsters[i]->attributes, ASLEEP);
curr_level->monsters[i]->energy = curr_level->guy->speed;
curr_level->monsters[i]->other_count = 0;
}
}
hp_old = hp;
// int colors[6] = { 46, 82, 118, 154, 190, 226 }; //green/yellow (plant)
int colors[6] = { 201, 165, 129, 93, 57, 21 }; //purple/blue
// int colors[6] = { 196, 202, 208, 214, 220, 226 }; //red/yellow (fire)
// int colors[6] = { 52, 58, 64, 70, 76, 82}; //red/grean (sickly);
// int colors[6] = { 196, 160, 124, 88, 52, 52 }; //dark red
color = colors[other_count];
int direction = range(1,9);
int spawn_x = x, spawn_y = y;
switch(direction)
{
case 1:
spawn_y--;
spawn_x--;
break;
case 2:
spawn_y--;
break;
case 3:
spawn_y--;
spawn_x++;
break;
case 4:
spawn_x--;
break;
case 5:
spawn_x++;
break;
case 6:
spawn_y++;
spawn_x--;
break;
case 7:
spawn_y++;
break;
case 8:
spawn_y++;
spawn_x++;
break;
}
for(unsigned int i=0; i<curr_level->monsters.size(); i++)
if(curr_level->monsters[i]->x == x && curr_level->monsters[i]->y == y && curr_level->monsters[i] != this)
attack_something(curr_level->monsters[i]);
if(curr_level->data->data[spawn_y][spawn_x] == FLOOR)
{
// if(range(0,2) != 1)
// return;
for(unsigned int i=0; i<curr_level->monsters.size(); i++)
if(curr_level->monsters[i]->x == spawn_x && curr_level->monsters[i]->y == spawn_y && !check_bit(curr_level->monsters[i]->attributes, DEAD))
{
if(curr_level->monsters[i]->type != type)
attack_something(curr_level->monsters[i]);
return;
}
if(curr_level->guy->x == spawn_x && curr_level->guy->y == spawn_y)
{
attack_something(curr_level->guy);
return;
}
curr_level->monsters.push_back(new fungus(type,spawn_x, spawn_y, curr_level));
}
}
int main(void) {
int t; // number of test cases
scanf("%d", &t);
char s[MAX_LENGTH]; // string S, maximum length of 10
int bits[INT_SIZE]; // we need 10 bits, hence 1 int will do
for (int i = 1; i <= t; i++) {
scanf("%s", s);
// printf("%lu\n", strlen(s));
if (strlen(s) == 0) { // No pancakes, no flipping
printf("Case #%d: 0\n", i);
continue;
}
// Clear the bit array
for (int x = 0; x < INT_SIZE; x++) {
bits[x] = 0;
}
// Translate + to 1 and - to 0 in the bits array
int len = strlen(s);
for (int pos = 0; pos < len; pos++) {
if (s[pos] == '+') {
set_bit(bits, pos);
} // else it's still 0
}
// Now set the remaining bits after len to 1 (happy)
for (int pos = len; pos < (INT_SIZE * 4 * 8); pos++) {
set_bit(bits, pos);
}
// for (int pos = 0; pos < (INT_SIZE * 4 * 8); pos++) {
// printf("%d", check_bit(bits, pos));
// }
int flipped_count = 0;
while (1) {
if (check_bit(bits, 0) == 1) { // start with a +, flip first
int l = 0;
while (check_bit(bits, l) == 1 && l < MAX_LENGTH) l++;
if (l == MAX_LENGTH) { // all done, break loop
break;
}
reverse_and_flip_bits(bits, l);
flipped_count++;
}
// should start with a - here, look for differences now
int l = 0;
while (check_bit(bits, l) == 0) l++;
reverse_and_flip_bits(bits, l);
flipped_count++;
}
printf("Case #%d: %d\n", i, flipped_count);
}
return 0;
}
uint32_t get_pinMode(uint32_t pin)
{
uint64_t bit = check_bit(&pin_modes, pin);
return ((bit == 0)? IN : OUTPUT);
}
uint32_t get_pinState(uint32_t pin)
{
uint64_t bit = check_bit(&pin_states, pin);
return ((bit == 0)? LOW : HIGH);
}
/* ------------------------------------------------------------------------- */
uint8_t nrf24_miso_digitalRead()
{
return check_bit(RF_PIN,MISO);
}
int ProcessingRestrictions::CheckUsageControl()
{
DataObject dob_auc; // Application Usage Control
int res;
if (InitStatus == EMV_DATA_ERROR)
return initError;
if (InitStatus == EMV_DATA_NOT_INITIALIZED)
{
if (initData() != SUCCESS)
return initError;
}
res = EnvContext.getTagValue (0x9f07, &dob_auc, true);
if (res == SUCCESS && dob_auc.len > 0)
{
// DO checking according to section 6.4.2, EMV book 3 -
// Application Usage Control)
// Get Terminal Type and additional terminal capabilities
DataObject dob_termType;
DataObject dob_addTermCap;
if ((res = EnvContext.getTagValue (0x9f35, &dob_termType, false))
!= SUCCESS)
return EMV_MISSING_MANDATORY_DATA;
if ((res = EnvContext.getTagValue (0x9f40, &dob_addTermCap, false))
!= SUCCESS)
return EMV_MISSING_MANDATORY_DATA;
// Check condition 1 (section 6.4.2, EMV book 3)
if (IsATM(&dob_termType, &dob_addTermCap))
{
// Terminal type is ATM
if (!check_bit(dob_auc.Data[0], 0x02))
{
//Appl Usage Control doesn't have 'Valid for ATMs' bit set
updateDataObject (0x95, &dob_TVR, 2, 0x10);
}
}
else
{
// Terminal is not an ATM
// Check condition 2 (section 6.4.2, EMV book 3)
if (!check_bit(dob_auc.Data[0], 0x01))
{
// Appl Usage Control doesn't have 'Valid for terminals
// other than ATMs' bit set
updateDataObject (0x95, &dob_TVR, 2, 0x10);
}
}
// Get Issuer Country Code
DataObject dob_issCntryCode;
if ((res = EnvContext.getTagValue (0x5f28, &dob_issCntryCode, true))
!= SUCCESS)
{
// Issuer Country code is conditional if Application Usage Control is
// present. Since it is not found, do not continue with additional
// checking
return SUCCESS;
//return EMV_MISSING_MANDATORY_DATA;
}
// Get Transaction Info (tag '60000001' in TransactionTypes). This data type
// must be initialized during TransactionType initialization
DataObject dob_transInfo;
if ((res = EnvContext.getTagValue (0x60000001, &dob_transInfo, true))
!= SUCCESS)
{
// Transaction Info is mandatory.
//Since it is not found, exit the transaction
return EMV_MISSING_MANDATORY_DATA;
}
byte cash = 0x20;
byte goods = 0x04;
byte services = 0x08;
byte cashback = 0x02;
byte dom_cash = 0x80;
byte int_cash = 0x40;
byte dom_goods = 0x20;
byte int_goods = 0x10;
byte dom_serv = 0x08;
byte int_serv = 0x04;
byte dom_csh_back = 0x80;
byte int_csh_back = 0x40;
bool IsCountryCodeMatch = CompareByteArr (dob_issCntryCode.Data,
dob_issCntryCode.len,
dob_TermCountryCode.Data,
dob_TermCountryCode.len);
if (checkTransaction (dob_transInfo.Data [0],
cash, dom_cash, int_cash,
dob_auc.Data[0], IsCountryCodeMatch) != SUCCESS)
return updateDataObject (0x95, &dob_TVR, 2, 0x10);
if (checkTransaction (dob_transInfo.Data [0],
goods, dom_goods, int_goods,
dob_auc.Data[0], IsCountryCodeMatch) != SUCCESS)
return updateDataObject (0x95, &dob_TVR, 2, 0x10);
if (checkTransaction (dob_transInfo.Data [0],
services, dom_serv, int_serv,
dob_auc.Data[0], IsCountryCodeMatch) != SUCCESS)
return updateDataObject (0x95, &dob_TVR, 2, 0x10);
// Check if cashback amount (Amount Other, tag '9F03') is present
DataObject dob_cashBack;
if ((res = EnvContext.getTagValue (0x9f03, &dob_cashBack, true))
== SUCCESS)
{
if (checkTransaction (dob_transInfo.Data [0],
cashback, dom_csh_back,
int_csh_back, dob_auc.Data[1],
IsCountryCodeMatch) != SUCCESS)
return updateDataObject (0x95, &dob_TVR, 2, 0x10);
}
}
return SUCCESS;
}
/* ------------------------------------------------------------------------- */
uint8_t nrf24_miso_digitalRead()
{
return check_bit(PINC,0);
}
