static int h3600_pcmcia_socket_suspend(int sock)
{
switch (sock) {
case 0:
set_GPIO_IRQ_edge(GPIO_H3600_PCMCIA_CD0, GPIO_NO_EDGES);
break;
case 1:
set_GPIO_IRQ_edge(GPIO_H3600_PCMCIA_CD1, GPIO_NO_EDGES);
break;
}
/*
* FIXME: This doesn't fit well. We don't have the mechanism in
* the generic PCMCIA layer to deal with the idea of two sockets
* on one bus. We rely on the cs.c behaviour shutting down
* socket 0 then socket 1.
*/
if (sock == 1) {
clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
/* hmm, does this suck power? */
set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
}
return 0;
}
static void h3600_audio_init(void *dummy)
{
unsigned long flags;
/* Setup the uarts */
local_irq_save(flags);
GAFR |= (GPIO_SSP_CLK);
GPDR &= ~(GPIO_SSP_CLK);
Ser4SSCR0 = 0;
Ser4SSCR0 = SSCR0_DataSize(16) + SSCR0_TI + SSCR0_SerClkDiv(8);
Ser4SSCR1 = SSCR1_SClkIactL + SSCR1_SClk1P + SSCR1_ExtClk;
Ser4SSCR0 |= SSCR0_SSE;
/* Enable the audio power */
clr_h3600_egpio(IPAQ_EGPIO_CODEC_NRESET);
set_h3600_egpio(IPAQ_EGPIO_AUDIO_ON);
set_h3600_egpio(IPAQ_EGPIO_QMUTE);
local_irq_restore(flags);
/* external clock configuration */
h3600_set_samplerate(audio_samplerate);
/* Wait for the UDA1341 to wake up */
set_h3600_egpio(IPAQ_EGPIO_CODEC_NRESET);
mdelay(1);
/* make the left and right channels unswapped (flip the WS latch ) */
Ser4SSDR = 0;
/* Initialize the UDA1341 internal state */
l3_open(&uda1341);
clr_h3600_egpio(IPAQ_EGPIO_QMUTE);
}
static void h3600_audio_shutdown(void *dummy)
{
/* disable the audio power and all signals leading to the audio chip */
l3_close(&uda1341);
Ser4SSCR0 = 0;
clr_h3600_egpio(IPAQ_EGPIO_CODEC_NRESET);
clr_h3600_egpio(IPAQ_EGPIO_AUDIO_ON);
clr_h3600_egpio(IPAQ_EGPIO_QMUTE);
}
static void h3600_set_vpp(struct map_info *map, int vpp)
{
if (vpp)
set_h3600_egpio(EGPIO_H3600_VPP_ON);
else
clr_h3600_egpio(EGPIO_H3600_VPP_ON);
}
static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
{
if (speed < 4000000) {
clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
} else {
set_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
}
}
static int h3600_pcmcia_shutdown(void)
{
int i;
/*
* disable IRQs
*/
for (i = 0; i < ARRAY_SIZE(irqs); i++)
free_irq(irqs[i].irq, NULL);
/* Disable CF bus: */
clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
return 0;
}
/*
* This turns the IRDA power on or off on the Compaq H3600
*/
static inline int
sa1100_irda_set_power_h3600(struct sa1100_irda *si, unsigned int state)
{
if (state)
set_h3600_egpio(EGPIO_H3600_IR_ON);
else
clr_h3600_egpio(EGPIO_H3600_IR_ON);
return 0;
}
int h3600_micro_audio_power( long samplerate )
{
int retval = 0;
if ( samplerate ) {
clr_h3600_egpio(IPAQ_EGPIO_CODEC_NRESET);
set_h3600_egpio(IPAQ_EGPIO_AUDIO_ON);
set_h3600_egpio(IPAQ_EGPIO_QMUTE);
retval = h3600_micro_audio_clock( samplerate );
set_h3600_egpio(IPAQ_EGPIO_CODEC_NRESET);
}
else { /* Power down */
clr_h3600_egpio(IPAQ_EGPIO_CODEC_NRESET);
clr_h3600_egpio(IPAQ_EGPIO_AUDIO_ON);
clr_h3600_egpio(IPAQ_EGPIO_QMUTE);
}
return retval;
}
static int h3600_stowaway_release(struct inode * inode, struct file * filp)
{
struct skbd_state *skbd = (struct skbd_state *) filp->private_data;
if (1) SFDEBUG(1,"\n");
if ( --skbd->usage_count == 0 ) {
SFDEBUG(1,"Closing down keyboard\n");
h3600_stowaway_release_all_keys(skbd);
h3600_stowaway_shutdown(skbd);
kbd_ledfunc = skbd->old_ledfunc;
clr_h3600_egpio(IPAQ_EGPIO_RS232_ON);
}
MOD_DEC_USE_COUNT;
return 0;
}
static int h3600_pcmcia_socket_init(int sock)
{
/* Enable CF bus: */
set_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
set_h3600_egpio(IPAQ_EGPIO_OPT_ON);
clr_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(10*HZ / 1000);
switch (sock) {
case 0:
set_GPIO_IRQ_edge(GPIO_H3600_PCMCIA_CD0, GPIO_BOTH_EDGES);
break;
case 1:
set_GPIO_IRQ_edge(GPIO_H3600_PCMCIA_CD1, GPIO_BOTH_EDGES);
break;
}
return 0;
}
static int
h3600_pcmcia_configure_socket(const struct pcmcia_configure *conf)
{
if (conf->sock > 1)
return -1;
if (conf->vcc != 0 && conf->vcc != 33 && conf->vcc != 50) {
printk(KERN_ERR "h3600_pcmcia: unrecognized Vcc %u.%uV\n",
conf->vcc / 10, conf->vcc % 10);
return -1;
}
if (conf->reset)
set_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
else
clr_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
/* Silently ignore Vpp, output enable, speaker enable. */
return 0;
}
/*
* Set the IrDA communications speed.
*/
static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
{
unsigned long flags;
int brd, ret = -EINVAL;
switch (speed) {
case 9600: case 19200: case 38400:
case 57600: case 115200:
brd = 3686400 / (16 * speed) - 1;
/*
* Stop the receive DMA.
*/
if (IS_FIR(si))
sa1100_stop_dma(si->rxdma);
local_irq_save(flags);
Ser2UTCR3 = 0;
Ser2HSCR0 = HSCR0_UART;
Ser2UTCR1 = brd >> 8;
Ser2UTCR2 = brd;
/*
* Clear status register
*/
Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
if (machine_is_assabet())
ASSABET_BCR_clear(ASSABET_BCR_IRDA_FSEL);
if (machine_is_h3xxx())
clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
if (machine_is_yopy())
PPSR &= ~GPIO_IRDA_FIR;
si->speed = speed;
local_irq_restore(flags);
ret = 0;
break;
case 4000000:
local_irq_save(flags);
si->hscr0 = 0;
Ser2HSSR0 = 0xff;
Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
Ser2UTCR3 = 0;
si->speed = speed;
if (machine_is_assabet())
ASSABET_BCR_set(ASSABET_BCR_IRDA_FSEL);
if (machine_is_h3xxx())
set_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
if (machine_is_yopy())
PPSR |= GPIO_IRDA_FIR;
sa1100_irda_rx_alloc(si);
sa1100_irda_rx_dma_start(si);
local_irq_restore(flags);
break;
default:
break;
}
return ret;
}
