void print_status_reg(void)
{
uint8_t count;
clr_scr_rst_cur(LPC_UART0);
for(count = 0; count<4; ++count)
{
printf(LPC_UART0,status_reg[count]);
}
}
/**
* @brief
* @param None
* @retval None
*/
void print_main_menu(void)
{
uint8_t count;
clr_scr_rst_cur();
for( count = 0; count<19; ++count)
{
usart2_printf(main_menu[count]);
}
}
/*********************************************************************//**
* @brief Ask for Address Range you want to display
* @param[in] SSPx SSP peripheral definition, should be:
* - LPC_SSP0: SSP0 peripheral
* - LPC_SSP1: SSP1 peripheral
* @param[in] mem_start_address Memory Start Address
* @param[in] mem_end_address End Memory Location
* @return None
**********************************************************************/
void Display_Eeprom_Loc (LPC_SSP_TypeDef *SSPx, uint16 mem_start_address, uint16 mem_end_address)
{
uint8_t line=0,count=0;
uint16_t dat;
uint16_t addr;
printf(LPC_UART0,"EEPROM Range = 0x000 - 0x7FF \r\n");
clr_scr_rst_cur(LPC_UART0);
printf(LPC_UART0,"Start: %x03 End: %x03 \r\n",mem_start_address,mem_end_address);
for(addr=mem_start_address; addr<mem_end_address+1; addr++)
{
if(count == 0) printf(LPC_UART0,"%x03 ",addr);
dat = Ssp_Eeprom_Read_Byte(SSPx, addr); /* read byte from address */
printf(LPC_UART0,"%x02 ",dat);
count++;
if(count == 16) /* check for last digit entered */
{
line++;
count = 0;
printf(LPC_UART0,"\r\n");
}
if(line == 20 || addr == mem_end_address)
{
printf(LPC_UART0,"\x1b[24;01HPress any key to continue.");
line = 0;
getche(LPC_UART0);
clr_scr_rst_cur(LPC_UART0);
}
}
}
/*********************************************************************//**
* @brief Reads status register value
* @param[in] SSPx SSP peripheral definition, should be:
* - LPC_SSP0: SSP0 peripheral
* - LPC_SSP1: SSP1 peripheral
* @return None
**********************************************************************/
void Read_Eeprom_Status (LPC_SSP_TypeDef *SSPx)
{
uint8_t wpen=0, bp1=0, bp0=0, wel=0, wip=0;
uint8_t dat;
clr_scr_rst_cur(LPC_UART0);
dat = Ssp_Eeprom_Read_Status_Reg(SSPx);
if(dat&0x80){wpen=1;}else{wpen=0;}
if(dat&0x08){bp1 =1;}else{bp1 =0;}
if(dat&0x04){bp0 =1;}else{bp0 =0;}
if(dat&0x02){wel =1;}else{wel =0;}
if(dat&0x01){wip =1;}else{wip =0;}
print_status_reg();
printf(LPC_UART0,"\n\r%d01 X X X %d01 %d01 %d01 %d01\n\r",wpen,bp1,bp0,wel,wip);
getche(LPC_UART0);
EscFlag = 0;
}
