int
pcgstrf_column_bmod(
const int pnum, /* process number */
const int jcol, /* current column in the panel */
const int fpanelc,/* first column in the panel */
const int nseg, /* number of s-nodes to update jcol */
int *segrep,/* in */
int *repfnz,/* in */
complex *dense, /* modified */
complex *tempv, /* working array */
pxgstrf_shared_t *pxgstrf_shared, /* modified */
Gstat_t *Gstat /* modified */
)
{
/*
* -- SuperLU MT routine (version 2.0) --
* Lawrence Berkeley National Lab, Univ. of California Berkeley,
* and Xerox Palo Alto Research Center.
* September 10, 2007
*
* Purpose:
* ========
* Performs numeric block updates (sup-col) in topological order.
* It features: col-col, 2cols-col, 3cols-col, and sup-col updates.
* Special processing on the supernodal portion of L\U[*,j].
*
* Return value:
* =============
* 0 - successful return
* > 0 - number of bytes allocated when run out of space
*
*/
#if ( MACH==CRAY_PVP )
_fcd ftcs1 = _cptofcd("L", strlen("L")),
ftcs2 = _cptofcd("N", strlen("N")),
ftcs3 = _cptofcd("U", strlen("U"));
#endif
#ifdef USE_VENDOR_BLAS
int incx = 1, incy = 1;
complex alpha, beta;
#endif
GlobalLU_t *Glu = pxgstrf_shared->Glu; /* modified */
/* krep = representative of current k-th supernode
* fsupc = first supernodal column
* nsupc = no of columns in supernode
* nsupr = no of rows in supernode (used as leading dimension)
* luptr = location of supernodal LU-block in storage
* kfnz = first nonz in the k-th supernodal segment
* no_zeros = no of leading zeros in a supernodal U-segment
*/
complex ukj, ukj1, ukj2;
register int lptr, kfnz, isub, irow, i, no_zeros;
register int luptr, luptr1, luptr2;
int fsupc, nsupc, nsupr, segsze;
int nrow; /* No of rows in the matrix of matrix-vector */
int jsupno, k, ksub, krep, krep_ind, ksupno;
int ufirst, nextlu;
int fst_col; /* First column within small LU update */
int d_fsupc; /* Distance between the first column of the current
panel and the first column of the current snode.*/
int *xsup, *supno;
int *lsub, *xlsub, *xlsub_end;
complex *lusup;
int *xlusup, *xlusup_end;
complex *tempv1;
int mem_error;
register float flopcnt;
complex zero = {0.0, 0.0};
complex one = {1.0, 0.0};
complex none = {-1.0, 0.0};
complex comp_temp, comp_temp1;
xsup = Glu->xsup;
supno = Glu->supno;
lsub = Glu->lsub;
xlsub = Glu->xlsub;
xlsub_end = Glu->xlsub_end;
lusup = Glu->lusup;
xlusup = Glu->xlusup;
xlusup_end = Glu->xlusup_end;
jsupno = supno[jcol];
/*
* For each nonz supernode segment of U[*,j] in topological order
*/
k = nseg - 1;
for (ksub = 0; ksub < nseg; ksub++) {
krep = segrep[k];
k--;
ksupno = supno[krep];
#if ( DEBUGlvel>=2 )
if (jcol==BADCOL)
printf("(%d) pcgstrf_column_bmod[1]: %d, nseg %d, krep %d, jsupno %d, ksupno %d\n",
pnum, jcol, nseg, krep, jsupno, ksupno);
#endif
if ( jsupno != ksupno ) { /* Outside the rectangular supernode */
fsupc = xsup[ksupno];
fst_col = SUPERLU_MAX ( fsupc, fpanelc );
/* Distance from the current supernode to the current panel;
d_fsupc=0 if fsupc >= fpanelc. */
d_fsupc = fst_col - fsupc;
luptr = xlusup[fst_col] + d_fsupc;
lptr = xlsub[fsupc] + d_fsupc;
kfnz = repfnz[krep];
kfnz = SUPERLU_MAX ( kfnz, fpanelc );
segsze = krep - kfnz + 1;
nsupc = krep - fst_col + 1;
nsupr = xlsub_end[fsupc] - xlsub[fsupc]; /* Leading dimension */
nrow = nsupr - d_fsupc - nsupc;
krep_ind = lptr + nsupc - 1;
flopcnt = segsze * (segsze - 1) + 2 * nrow * segsze;//sj
Gstat->procstat[pnum].fcops += flopcnt;
#if ( DEBUGlevel>=2 )
if (jcol==BADCOL)
printf("(%d) pcgstrf_column_bmod[2]: %d, krep %d, kfnz %d, segsze %d, d_fsupc %d,\
fsupc %d, nsupr %d, nsupc %d\n",
pnum, jcol, krep, kfnz, segsze, d_fsupc, fsupc, nsupr, nsupc);
#endif
/*
* Case 1: Update U-segment of size 1 -- col-col update
*/
if ( segsze == 1 ) {
ukj = dense[lsub[krep_ind]];
luptr += nsupr*(nsupc-1) + nsupc;
for (i = lptr + nsupc; i < xlsub_end[fsupc]; ++i) {
irow = lsub[i];
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
c_sub(&dense[irow], &dense[irow], &comp_temp);
luptr++;
}
} else if ( segsze <= 3 ) {
ukj = dense[lsub[krep_ind]];
luptr += nsupr*(nsupc-1) + nsupc-1;
ukj1 = dense[lsub[krep_ind - 1]];
luptr1 = luptr - nsupr;
if ( segsze == 2 ) { /* Case 2: 2cols-col update */
cc_mult(&comp_temp, &ukj1, &lusup[luptr1]);
c_sub(&ukj, &ukj, &comp_temp);
dense[lsub[krep_ind]] = ukj;
for (i = lptr + nsupc; i < xlsub_end[fsupc]; ++i) {
irow = lsub[i];
luptr++;
luptr1++;
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
cc_mult(&comp_temp1, &ukj1, &lusup[luptr1]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&dense[irow], &dense[irow], &comp_temp);
}
} else { /* Case 3: 3cols-col update */
ukj2 = dense[lsub[krep_ind - 2]];
luptr2 = luptr1 - nsupr;
cc_mult(&comp_temp, &ukj2, &lusup[luptr2-1]);
c_sub(&ukj1, &ukj1, &comp_temp);
cc_mult(&comp_temp, &ukj1, &lusup[luptr1]);
cc_mult(&comp_temp1, &ukj2, &lusup[luptr2]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&ukj, &ukj, &comp_temp);
dense[lsub[krep_ind]] = ukj;
dense[lsub[krep_ind-1]] = ukj1;
for (i = lptr + nsupc; i < xlsub_end[fsupc]; ++i) {
irow = lsub[i];
luptr++;
luptr1++;
luptr2++;
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
cc_mult(&comp_temp1, &ukj1, &lusup[luptr1]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
cc_mult(&comp_temp1, &ukj2, &lusup[luptr2]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&dense[irow], &dense[irow], &comp_temp);
}
}
} else {
/*
* Case: sup-col update
* Perform a triangular solve and block update,
* then scatter the result of sup-col update to dense
*/
no_zeros = kfnz - fst_col;
/* Copy U[*,j] segment from dense[*] to tempv[*] */
isub = lptr + no_zeros;
for (i = 0; i < segsze; i++) {
irow = lsub[isub];
tempv[i] = dense[irow];
++isub;
}
/* Dense triangular solve -- start effective triangle */
luptr += nsupr * no_zeros + no_zeros;
#ifdef USE_VENDOR_BLAS
#if ( MACH==CRAY_PVP )
CTRSV( ftcs1, ftcs2, ftcs3, &segsze, &lusup[luptr],
&nsupr, tempv, &incx );
#else
ctrsv_( "L", "N", "U", &segsze, &lusup[luptr],
&nsupr, tempv, &incx );
#endif
luptr += segsze; /* Dense matrix-vector */
tempv1 = &tempv[segsze];
alpha = one;
beta = zero;
#if ( MACH==CRAY_PVP )
CGEMV( ftcs2, &nrow, &segsze, &alpha, &lusup[luptr],
&nsupr, tempv, &incx, &beta, tempv1, &incy );
#else
cgemv_( "N", &nrow, &segsze, &alpha, &lusup[luptr],
&nsupr, tempv, &incx, &beta, tempv1, &incy );
#endif
#else
clsolve ( nsupr, segsze, &lusup[luptr], tempv );
luptr += segsze; /* Dense matrix-vector */
tempv1 = &tempv[segsze];
cmatvec (nsupr, nrow , segsze, &lusup[luptr], tempv, tempv1);
#endif
/* Scatter tempv[] into SPA dense[*] */
isub = lptr + no_zeros;
for (i = 0; i < segsze; i++) {
irow = lsub[isub];
dense[irow] = tempv[i]; /* Scatter */
tempv[i] = zero;
isub++;
}
/* Scatter tempv1[] into SPA dense[*] */
for (i = 0; i < nrow; i++) {
irow = lsub[isub];
c_sub(&dense[irow], &dense[irow], &tempv1[i]);
tempv1[i] = zero;
++isub;
}
} /* else segsze >= 4 */
} /* if jsupno ... */
} /* for each segment... */
/* ------------------------------------------
Process the supernodal portion of L\U[*,j]
------------------------------------------ */
fsupc = SUPER_FSUPC (jsupno);
nsupr = xlsub_end[fsupc] - xlsub[fsupc];
if ( (mem_error = Glu_alloc(pnum, jcol, nsupr, LUSUP, &nextlu,
pxgstrf_shared)) )
return mem_error;
xlusup[jcol] = nextlu;
lusup = Glu->lusup;
/* Gather the nonzeros from SPA dense[*,j] into L\U[*,j] */
for (isub = xlsub[fsupc]; isub < xlsub_end[fsupc]; ++isub) {
irow = lsub[isub];
lusup[nextlu] = dense[irow];
dense[irow] = zero;
#ifdef DEBUG
if (jcol == -1)
printf("(%d) pcgstrf_column_bmod[lusup] jcol %d, irow %d, lusup %.10e\n",
pnum, jcol, irow, lusup[nextlu]);
#endif
++nextlu;
}
xlusup_end[jcol] = nextlu; /* close L\U[*,jcol] */
#if ( DEBUGlevel>=2 )
if (jcol == -1) {
nrow = xlusup_end[jcol] - xlusup[jcol];
print_double_vec("before sup-col update", nrow, &lsub[xlsub[fsupc]],
&lusup[xlusup[jcol]]);
}
#endif
/*
* For more updates within the panel (also within the current supernode),
* should start from the first column of the panel, or the first column
* of the supernode, whichever is bigger. There are 2 cases:
* (1) fsupc < fpanelc, then fst_col := fpanelc
* (2) fsupc >= fpanelc, then fst_col := fsupc
*/
fst_col = SUPERLU_MAX ( fsupc, fpanelc );
if ( fst_col < jcol ) {
/* distance between the current supernode and the current panel;
d_fsupc=0 if fsupc >= fpanelc. */
d_fsupc = fst_col - fsupc;
lptr = xlsub[fsupc] + d_fsupc;
luptr = xlusup[fst_col] + d_fsupc;
nsupr = xlsub_end[fsupc] - xlsub[fsupc]; /* Leading dimension */
nsupc = jcol - fst_col; /* Excluding jcol */
nrow = nsupr - d_fsupc - nsupc;
/* points to the beginning of jcol in supernode L\U[*,jsupno] */
ufirst = xlusup[jcol] + d_fsupc;
#if ( DEBUGlevel>=2 )
if (jcol==BADCOL)
printf("(%d) pcgstrf_column_bmod[3] jcol %d, fsupc %d, nsupr %d, nsupc %d, nrow %d\n",
pnum, jcol, fsupc, nsupr, nsupc, nrow);
#endif
flopcnt = nsupc * (nsupc - 1) + 2 * nrow * nsupc; //sj
Gstat->procstat[pnum].fcops += flopcnt;
/* ops[TRSV] += nsupc * (nsupc - 1);
ops[GEMV] += 2 * nrow * nsupc; */
#ifdef USE_VENDOR_BLAS
alpha = none; beta = one; /* y := beta*y + alpha*A*x */
#if ( MACH==CRAY_PVP )
CTRSV( ftcs1, ftcs2, ftcs3, &nsupc, &lusup[luptr],
&nsupr, &lusup[ufirst], &incx );
CGEMV( ftcs2, &nrow, &nsupc, &alpha, &lusup[luptr+nsupc], &nsupr,
&lusup[ufirst], &incx, &beta, &lusup[ufirst+nsupc], &incy );
#else
ctrsv_( "L", "N", "U", &nsupc, &lusup[luptr],
&nsupr, &lusup[ufirst], &incx );
cgemv_( "N", &nrow, &nsupc, &alpha, &lusup[luptr+nsupc], &nsupr,
&lusup[ufirst], &incx, &beta, &lusup[ufirst+nsupc], &incy );
#endif
#else
clsolve ( nsupr, nsupc, &lusup[luptr], &lusup[ufirst] );
cmatvec ( nsupr, nrow, nsupc, &lusup[luptr+nsupc],
&lusup[ufirst], tempv );
/* Copy updates from tempv[*] into lusup[*] */
isub = ufirst + nsupc;
for (i = 0; i < nrow; i++) {
c_sub(&lusup[isub], &lusup[isub], &tempv[i]);
tempv[i] = zero;
++isub;
}
#endif
} /* if fst_col < jcol ... */
return 0;
}
void
cpanel_bmod (
const int m, /* in - number of rows in the matrix */
const int w, /* in */
const int jcol, /* in */
const int nseg, /* in */
complex *dense, /* out, of size n by w */
complex *tempv, /* working array */
int *segrep, /* in */
int *repfnz, /* in, of size n by w */
GlobalLU_t *Glu, /* modified */
SuperLUStat_t *stat /* output */
)
{
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
_fcd ftcs1 = _cptofcd("L", strlen("L")),
ftcs2 = _cptofcd("N", strlen("N")),
ftcs3 = _cptofcd("U", strlen("U"));
#endif
int incx = 1, incy = 1;
complex alpha, beta;
#endif
register int k, ksub;
int fsupc, nsupc, nsupr, nrow;
int krep, krep_ind;
complex ukj, ukj1, ukj2;
int luptr, luptr1, luptr2;
int segsze;
int block_nrow; /* no of rows in a block row */
register int lptr; /* Points to the row subscripts of a supernode */
int kfnz, irow, no_zeros;
register int isub, isub1, i;
register int jj; /* Index through each column in the panel */
int *xsup, *supno;
int *lsub, *xlsub;
complex *lusup;
int *xlusup;
int *repfnz_col; /* repfnz[] for a column in the panel */
complex *dense_col; /* dense[] for a column in the panel */
complex *tempv1; /* Used in 1-D update */
complex *TriTmp, *MatvecTmp; /* used in 2-D update */
complex zero = {0.0, 0.0};
complex one = {1.0, 0.0};
complex comp_temp, comp_temp1;
register int ldaTmp;
register int r_ind, r_hi;
static int first = 1, maxsuper, rowblk, colblk;
flops_t *ops = stat->ops;
xsup = Glu->xsup;
supno = Glu->supno;
lsub = Glu->lsub;
xlsub = Glu->xlsub;
lusup = Glu->lusup;
xlusup = Glu->xlusup;
if ( first ) {
maxsuper = SUPERLU_MAX( sp_ienv(3), sp_ienv(7) );
rowblk = sp_ienv(4);
colblk = sp_ienv(5);
first = 0;
}
ldaTmp = maxsuper + rowblk;
/*
* For each nonz supernode segment of U[*,j] in topological order
*/
k = nseg - 1;
for (ksub = 0; ksub < nseg; ksub++) { /* for each updating supernode */
/* krep = representative of current k-th supernode
* fsupc = first supernodal column
* nsupc = no of columns in a supernode
* nsupr = no of rows in a supernode
*/
krep = segrep[k--];
fsupc = xsup[supno[krep]];
nsupc = krep - fsupc + 1;
nsupr = xlsub[fsupc+1] - xlsub[fsupc];
nrow = nsupr - nsupc;
lptr = xlsub[fsupc];
krep_ind = lptr + nsupc - 1;
repfnz_col = repfnz;
dense_col = dense;
if ( nsupc >= colblk && nrow > rowblk ) { /* 2-D block update */
TriTmp = tempv;
/* Sequence through each column in panel -- triangular solves */
for (jj = jcol; jj < jcol + w; jj++,
repfnz_col += m, dense_col += m, TriTmp += ldaTmp ) {
kfnz = repfnz_col[krep];
if ( kfnz == EMPTY ) continue; /* Skip any zero segment */
segsze = krep - kfnz + 1;
luptr = xlusup[fsupc];
ops[TRSV] += 4 * segsze * (segsze - 1);
ops[GEMV] += 8 * nrow * segsze;
/* Case 1: Update U-segment of size 1 -- col-col update */
if ( segsze == 1 ) {
ukj = dense_col[lsub[krep_ind]];
luptr += nsupr*(nsupc-1) + nsupc;
for (i = lptr + nsupc; i < xlsub[fsupc+1]; i++) {
irow = lsub[i];
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
c_sub(&dense_col[irow], &dense_col[irow], &comp_temp);
++luptr;
}
} else if ( segsze <= 3 ) {
ukj = dense_col[lsub[krep_ind]];
ukj1 = dense_col[lsub[krep_ind - 1]];
luptr += nsupr*(nsupc-1) + nsupc-1;
luptr1 = luptr - nsupr;
if ( segsze == 2 ) {
cc_mult(&comp_temp, &ukj1, &lusup[luptr1]);
c_sub(&ukj, &ukj, &comp_temp);
dense_col[lsub[krep_ind]] = ukj;
for (i = lptr + nsupc; i < xlsub[fsupc+1]; ++i) {
irow = lsub[i];
luptr++; luptr1++;
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
cc_mult(&comp_temp1, &ukj1, &lusup[luptr1]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&dense_col[irow], &dense_col[irow], &comp_temp);
}
} else {
ukj2 = dense_col[lsub[krep_ind - 2]];
luptr2 = luptr1 - nsupr;
cc_mult(&comp_temp, &ukj2, &lusup[luptr2-1]);
c_sub(&ukj1, &ukj1, &comp_temp);
cc_mult(&comp_temp, &ukj1, &lusup[luptr1]);
cc_mult(&comp_temp1, &ukj2, &lusup[luptr2]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&ukj, &ukj, &comp_temp);
dense_col[lsub[krep_ind]] = ukj;
dense_col[lsub[krep_ind-1]] = ukj1;
for (i = lptr + nsupc; i < xlsub[fsupc+1]; ++i) {
irow = lsub[i];
luptr++; luptr1++; luptr2++;
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
cc_mult(&comp_temp1, &ukj1, &lusup[luptr1]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
cc_mult(&comp_temp1, &ukj2, &lusup[luptr2]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&dense_col[irow], &dense_col[irow], &comp_temp);
}
}
} else { /* segsze >= 4 */
/* Copy U[*,j] segment from dense[*] to TriTmp[*], which
holds the result of triangular solves. */
no_zeros = kfnz - fsupc;
isub = lptr + no_zeros;
for (i = 0; i < segsze; ++i) {
irow = lsub[isub];
TriTmp[i] = dense_col[irow]; /* Gather */
++isub;
}
/* start effective triangle */
luptr += nsupr * no_zeros + no_zeros;
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
CTRSV( ftcs1, ftcs2, ftcs3, &segsze, &lusup[luptr],
&nsupr, TriTmp, &incx );
#else
ctrsv_( "L", "N", "U", &segsze, &lusup[luptr],
&nsupr, TriTmp, &incx );
#endif
#else
clsolve ( nsupr, segsze, &lusup[luptr], TriTmp );
#endif
} /* else ... */
} /* for jj ... end tri-solves */
/* Block row updates; push all the way into dense[*] block */
for ( r_ind = 0; r_ind < nrow; r_ind += rowblk ) {
r_hi = SUPERLU_MIN(nrow, r_ind + rowblk);
block_nrow = SUPERLU_MIN(rowblk, r_hi - r_ind);
luptr = xlusup[fsupc] + nsupc + r_ind;
isub1 = lptr + nsupc + r_ind;
repfnz_col = repfnz;
TriTmp = tempv;
dense_col = dense;
/* Sequence through each column in panel -- matrix-vector */
for (jj = jcol; jj < jcol + w; jj++,
repfnz_col += m, dense_col += m, TriTmp += ldaTmp) {
kfnz = repfnz_col[krep];
if ( kfnz == EMPTY ) continue; /* Skip any zero segment */
segsze = krep - kfnz + 1;
if ( segsze <= 3 ) continue; /* skip unrolled cases */
/* Perform a block update, and scatter the result of
matrix-vector to dense[]. */
no_zeros = kfnz - fsupc;
luptr1 = luptr + nsupr * no_zeros;
MatvecTmp = &TriTmp[maxsuper];
#ifdef USE_VENDOR_BLAS
alpha = one;
beta = zero;
#ifdef _CRAY
CGEMV(ftcs2, &block_nrow, &segsze, &alpha, &lusup[luptr1],
&nsupr, TriTmp, &incx, &beta, MatvecTmp, &incy);
#else
cgemv_("N", &block_nrow, &segsze, &alpha, &lusup[luptr1],
&nsupr, TriTmp, &incx, &beta, MatvecTmp, &incy);
#endif
#else
cmatvec(nsupr, block_nrow, segsze, &lusup[luptr1],
TriTmp, MatvecTmp);
#endif
/* Scatter MatvecTmp[*] into SPA dense[*] temporarily
* such that MatvecTmp[*] can be re-used for the
* the next blok row update. dense[] will be copied into
* global store after the whole panel has been finished.
*/
isub = isub1;
for (i = 0; i < block_nrow; i++) {
irow = lsub[isub];
c_sub(&dense_col[irow], &dense_col[irow],
&MatvecTmp[i]);
MatvecTmp[i] = zero;
++isub;
}
} /* for jj ... */
} /* for each block row ... */
/* Scatter the triangular solves into SPA dense[*] */
repfnz_col = repfnz;
TriTmp = tempv;
dense_col = dense;
for (jj = jcol; jj < jcol + w; jj++,
repfnz_col += m, dense_col += m, TriTmp += ldaTmp) {
kfnz = repfnz_col[krep];
if ( kfnz == EMPTY ) continue; /* Skip any zero segment */
segsze = krep - kfnz + 1;
if ( segsze <= 3 ) continue; /* skip unrolled cases */
no_zeros = kfnz - fsupc;
isub = lptr + no_zeros;
for (i = 0; i < segsze; i++) {
irow = lsub[isub];
dense_col[irow] = TriTmp[i];
TriTmp[i] = zero;
++isub;
}
} /* for jj ... */
} else { /* 1-D block modification */
/* Sequence through each column in the panel */
for (jj = jcol; jj < jcol + w; jj++,
repfnz_col += m, dense_col += m) {
kfnz = repfnz_col[krep];
if ( kfnz == EMPTY ) continue; /* Skip any zero segment */
segsze = krep - kfnz + 1;
luptr = xlusup[fsupc];
ops[TRSV] += 4 * segsze * (segsze - 1);
ops[GEMV] += 8 * nrow * segsze;
/* Case 1: Update U-segment of size 1 -- col-col update */
if ( segsze == 1 ) {
ukj = dense_col[lsub[krep_ind]];
luptr += nsupr*(nsupc-1) + nsupc;
for (i = lptr + nsupc; i < xlsub[fsupc+1]; i++) {
irow = lsub[i];
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
c_sub(&dense_col[irow], &dense_col[irow], &comp_temp);
++luptr;
}
} else if ( segsze <= 3 ) {
ukj = dense_col[lsub[krep_ind]];
luptr += nsupr*(nsupc-1) + nsupc-1;
ukj1 = dense_col[lsub[krep_ind - 1]];
luptr1 = luptr - nsupr;
if ( segsze == 2 ) {
cc_mult(&comp_temp, &ukj1, &lusup[luptr1]);
c_sub(&ukj, &ukj, &comp_temp);
dense_col[lsub[krep_ind]] = ukj;
for (i = lptr + nsupc; i < xlsub[fsupc+1]; ++i) {
irow = lsub[i];
++luptr; ++luptr1;
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
cc_mult(&comp_temp1, &ukj1, &lusup[luptr1]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&dense_col[irow], &dense_col[irow], &comp_temp);
}
} else {
ukj2 = dense_col[lsub[krep_ind - 2]];
luptr2 = luptr1 - nsupr;
cc_mult(&comp_temp, &ukj2, &lusup[luptr2-1]);
c_sub(&ukj1, &ukj1, &comp_temp);
cc_mult(&comp_temp, &ukj1, &lusup[luptr1]);
cc_mult(&comp_temp1, &ukj2, &lusup[luptr2]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&ukj, &ukj, &comp_temp);
dense_col[lsub[krep_ind]] = ukj;
dense_col[lsub[krep_ind-1]] = ukj1;
for (i = lptr + nsupc; i < xlsub[fsupc+1]; ++i) {
irow = lsub[i];
++luptr; ++luptr1; ++luptr2;
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
cc_mult(&comp_temp1, &ukj1, &lusup[luptr1]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
cc_mult(&comp_temp1, &ukj2, &lusup[luptr2]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&dense_col[irow], &dense_col[irow], &comp_temp);
}
}
} else { /* segsze >= 4 */
/*
* Perform a triangular solve and block update,
* then scatter the result of sup-col update to dense[].
*/
no_zeros = kfnz - fsupc;
/* Copy U[*,j] segment from dense[*] to tempv[*]:
* The result of triangular solve is in tempv[*];
* The result of matrix vector update is in dense_col[*]
*/
isub = lptr + no_zeros;
for (i = 0; i < segsze; ++i) {
irow = lsub[isub];
tempv[i] = dense_col[irow]; /* Gather */
++isub;
}
/* start effective triangle */
luptr += nsupr * no_zeros + no_zeros;
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
CTRSV( ftcs1, ftcs2, ftcs3, &segsze, &lusup[luptr],
&nsupr, tempv, &incx );
#else
ctrsv_( "L", "N", "U", &segsze, &lusup[luptr],
&nsupr, tempv, &incx );
#endif
luptr += segsze; /* Dense matrix-vector */
tempv1 = &tempv[segsze];
alpha = one;
beta = zero;
#ifdef _CRAY
CGEMV( ftcs2, &nrow, &segsze, &alpha, &lusup[luptr],
&nsupr, tempv, &incx, &beta, tempv1, &incy );
#else
cgemv_( "N", &nrow, &segsze, &alpha, &lusup[luptr],
&nsupr, tempv, &incx, &beta, tempv1, &incy );
#endif
#else
clsolve ( nsupr, segsze, &lusup[luptr], tempv );
luptr += segsze; /* Dense matrix-vector */
tempv1 = &tempv[segsze];
cmatvec (nsupr, nrow, segsze, &lusup[luptr], tempv, tempv1);
#endif
/* Scatter tempv[*] into SPA dense[*] temporarily, such
* that tempv[*] can be used for the triangular solve of
* the next column of the panel. They will be copied into
* ucol[*] after the whole panel has been finished.
*/
isub = lptr + no_zeros;
for (i = 0; i < segsze; i++) {
irow = lsub[isub];
dense_col[irow] = tempv[i];
tempv[i] = zero;
isub++;
}
/* Scatter the update from tempv1[*] into SPA dense[*] */
/* Start dense rectangular L */
for (i = 0; i < nrow; i++) {
irow = lsub[isub];
c_sub(&dense_col[irow], &dense_col[irow], &tempv1[i]);
tempv1[i] = zero;
++isub;
}
} /* else segsze>=4 ... */
} /* for each column in the panel... */
} /* else 1-D update ... */
} /* for each updating supernode ... */
}
/*! \brief Solves one of the systems of equations A*x = b, or A'*x = b
*
* <pre>
* Purpose
* =======
*
* sp_ctrsv() solves one of the systems of equations
* A*x = b, or A'*x = b,
* where b and x are n element vectors and A is a sparse unit , or
* non-unit, upper or lower triangular matrix.
* No test for singularity or near-singularity is included in this
* routine. Such tests must be performed before calling this routine.
*
* Parameters
* ==========
*
* uplo - (input) char*
* On entry, uplo specifies whether the matrix is an upper or
* lower triangular matrix as follows:
* uplo = 'U' or 'u' A is an upper triangular matrix.
* uplo = 'L' or 'l' A is a lower triangular matrix.
*
* trans - (input) char*
* On entry, trans specifies the equations to be solved as
* follows:
* trans = 'N' or 'n' A*x = b.
* trans = 'T' or 't' A'*x = b.
* trans = 'C' or 'c' A^H*x = b.
*
* diag - (input) char*
* On entry, diag specifies whether or not A is unit
* triangular as follows:
* diag = 'U' or 'u' A is assumed to be unit triangular.
* diag = 'N' or 'n' A is not assumed to be unit
* triangular.
*
* L - (input) SuperMatrix*
* The factor L from the factorization Pr*A*Pc=L*U. Use
* compressed row subscripts storage for supernodes,
* i.e., L has types: Stype = SC, Dtype = SLU_C, Mtype = TRLU.
*
* U - (input) SuperMatrix*
* The factor U from the factorization Pr*A*Pc=L*U.
* U has types: Stype = NC, Dtype = SLU_C, Mtype = TRU.
*
* x - (input/output) complex*
* Before entry, the incremented array X must contain the n
* element right-hand side vector b. On exit, X is overwritten
* with the solution vector x.
*
* info - (output) int*
* If *info = -i, the i-th argument had an illegal value.
* </pre>
*/
int
sp_ctrsv(char *uplo, char *trans, char *diag, SuperMatrix *L,
SuperMatrix *U, complex *x, SuperLUStat_t *stat, int *info)
{
#ifdef _CRAY
_fcd ftcs1 = _cptofcd("L", strlen("L")),
ftcs2 = _cptofcd("N", strlen("N")),
ftcs3 = _cptofcd("U", strlen("U"));
#endif
SCformat *Lstore;
NCformat *Ustore;
complex *Lval, *Uval;
int incx = 1, incy = 1;
complex temp;
complex alpha = {1.0, 0.0}, beta = {1.0, 0.0};
complex comp_zero = {0.0, 0.0};
int nrow;
int fsupc, nsupr, nsupc, luptr, istart, irow;
int i, k, iptr, jcol;
complex *work;
flops_t solve_ops;
/* Test the input parameters */
*info = 0;
if ( strncmp(uplo,"L", 1)!=0 && strncmp(uplo, "U", 1)!=0 ) *info = -1;
else if ( strncmp(trans, "N", 1)!=0 && strncmp(trans, "T", 1)!=0 &&
strncmp(trans, "C", 1)!=0) *info = -2;
else if ( strncmp(diag, "U", 1)!=0 && strncmp(diag, "N", 1)!=0 )
*info = -3;
else if ( L->nrow != L->ncol || L->nrow < 0 ) *info = -4;
else if ( U->nrow != U->ncol || U->nrow < 0 ) *info = -5;
if ( *info ) {
i = -(*info);
input_error("sp_ctrsv", &i);
return 0;
}
Lstore = L->Store;
Lval = Lstore->nzval;
Ustore = U->Store;
Uval = Ustore->nzval;
solve_ops = 0;
if ( !(work = complexCalloc(L->nrow)) )
ABORT("Malloc fails for work in sp_ctrsv().");
if ( strncmp(trans, "N", 1)==0 ) { /* Form x := inv(A)*x. */
if ( strncmp(uplo, "L", 1)==0 ) {
/* Form x := inv(L)*x */
if ( L->nrow == 0 ) return 0; /* Quick return */
for (k = 0; k <= Lstore->nsuper; k++) {
fsupc = L_FST_SUPC(k);
istart = L_SUB_START(fsupc);
nsupr = L_SUB_START(fsupc+1) - istart;
nsupc = L_FST_SUPC(k+1) - fsupc;
luptr = L_NZ_START(fsupc);
nrow = nsupr - nsupc;
/* 1 c_div costs 10 flops */
solve_ops += 4 * nsupc * (nsupc - 1) + 10 * nsupc;
solve_ops += 8 * nrow * nsupc;
if ( nsupc == 1 ) {
for (iptr=istart+1; iptr < L_SUB_START(fsupc+1); ++iptr) {
irow = L_SUB(iptr);
++luptr;
cc_mult(&comp_zero, &x[fsupc], &Lval[luptr]);
c_sub(&x[irow], &x[irow], &comp_zero);
}
} else {
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
CTRSV(ftcs1, ftcs2, ftcs3, &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
CGEMV(ftcs2, &nrow, &nsupc, &alpha, &Lval[luptr+nsupc],
&nsupr, &x[fsupc], &incx, &beta, &work[0], &incy);
#else
ctrsv_("L", "N", "U", &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
cgemv_("N", &nrow, &nsupc, &alpha, &Lval[luptr+nsupc],
&nsupr, &x[fsupc], &incx, &beta, &work[0], &incy);
#endif
#else
clsolve ( nsupr, nsupc, &Lval[luptr], &x[fsupc]);
cmatvec ( nsupr, nsupr-nsupc, nsupc, &Lval[luptr+nsupc],
&x[fsupc], &work[0] );
#endif
iptr = istart + nsupc;
for (i = 0; i < nrow; ++i, ++iptr) {
irow = L_SUB(iptr);
c_sub(&x[irow], &x[irow], &work[i]); /* Scatter */
work[i] = comp_zero;
}
}
} /* for k ... */
} else {
/* Form x := inv(U)*x */
if ( U->nrow == 0 ) return 0; /* Quick return */
for (k = Lstore->nsuper; k >= 0; k--) {
fsupc = L_FST_SUPC(k);
nsupr = L_SUB_START(fsupc+1) - L_SUB_START(fsupc);
nsupc = L_FST_SUPC(k+1) - fsupc;
luptr = L_NZ_START(fsupc);
/* 1 c_div costs 10 flops */
solve_ops += 4 * nsupc * (nsupc + 1) + 10 * nsupc;
if ( nsupc == 1 ) {
c_div(&x[fsupc], &x[fsupc], &Lval[luptr]);
for (i = U_NZ_START(fsupc); i < U_NZ_START(fsupc+1); ++i) {
irow = U_SUB(i);
cc_mult(&comp_zero, &x[fsupc], &Uval[i]);
c_sub(&x[irow], &x[irow], &comp_zero);
}
} else {
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
CTRSV(ftcs3, ftcs2, ftcs2, &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#else
ctrsv_("U", "N", "N", &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#endif
#else
cusolve ( nsupr, nsupc, &Lval[luptr], &x[fsupc] );
#endif
for (jcol = fsupc; jcol < L_FST_SUPC(k+1); jcol++) {
solve_ops += 8*(U_NZ_START(jcol+1) - U_NZ_START(jcol));
for (i = U_NZ_START(jcol); i < U_NZ_START(jcol+1);
i++) {
irow = U_SUB(i);
cc_mult(&comp_zero, &x[jcol], &Uval[i]);
c_sub(&x[irow], &x[irow], &comp_zero);
}
}
}
} /* for k ... */
}
} else if ( strncmp(trans, "T", 1)==0 ) { /* Form x := inv(A')*x */
if ( strncmp(uplo, "L", 1)==0 ) {
/* Form x := inv(L')*x */
if ( L->nrow == 0 ) return 0; /* Quick return */
for (k = Lstore->nsuper; k >= 0; --k) {
fsupc = L_FST_SUPC(k);
istart = L_SUB_START(fsupc);
nsupr = L_SUB_START(fsupc+1) - istart;
nsupc = L_FST_SUPC(k+1) - fsupc;
luptr = L_NZ_START(fsupc);
solve_ops += 8 * (nsupr - nsupc) * nsupc;
for (jcol = fsupc; jcol < L_FST_SUPC(k+1); jcol++) {
iptr = istart + nsupc;
for (i = L_NZ_START(jcol) + nsupc;
i < L_NZ_START(jcol+1); i++) {
irow = L_SUB(iptr);
cc_mult(&comp_zero, &x[irow], &Lval[i]);
c_sub(&x[jcol], &x[jcol], &comp_zero);
iptr++;
}
}
if ( nsupc > 1 ) {
solve_ops += 4 * nsupc * (nsupc - 1);
#ifdef _CRAY
ftcs1 = _cptofcd("L", strlen("L"));
ftcs2 = _cptofcd("T", strlen("T"));
ftcs3 = _cptofcd("U", strlen("U"));
CTRSV(ftcs1, ftcs2, ftcs3, &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#else
ctrsv_("L", "T", "U", &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#endif
}
}
} else {
/* Form x := inv(U')*x */
if ( U->nrow == 0 ) return 0; /* Quick return */
for (k = 0; k <= Lstore->nsuper; k++) {
fsupc = L_FST_SUPC(k);
nsupr = L_SUB_START(fsupc+1) - L_SUB_START(fsupc);
nsupc = L_FST_SUPC(k+1) - fsupc;
luptr = L_NZ_START(fsupc);
for (jcol = fsupc; jcol < L_FST_SUPC(k+1); jcol++) {
solve_ops += 8*(U_NZ_START(jcol+1) - U_NZ_START(jcol));
for (i = U_NZ_START(jcol); i < U_NZ_START(jcol+1); i++) {
irow = U_SUB(i);
cc_mult(&comp_zero, &x[irow], &Uval[i]);
c_sub(&x[jcol], &x[jcol], &comp_zero);
}
}
/* 1 c_div costs 10 flops */
solve_ops += 4 * nsupc * (nsupc + 1) + 10 * nsupc;
if ( nsupc == 1 ) {
c_div(&x[fsupc], &x[fsupc], &Lval[luptr]);
} else {
#ifdef _CRAY
ftcs1 = _cptofcd("U", strlen("U"));
ftcs2 = _cptofcd("T", strlen("T"));
ftcs3 = _cptofcd("N", strlen("N"));
CTRSV( ftcs1, ftcs2, ftcs3, &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#else
ctrsv_("U", "T", "N", &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#endif
}
} /* for k ... */
}
} else { /* Form x := conj(inv(A'))*x */
if ( strncmp(uplo, "L", 1)==0 ) {
/* Form x := conj(inv(L'))*x */
if ( L->nrow == 0 ) return 0; /* Quick return */
for (k = Lstore->nsuper; k >= 0; --k) {
fsupc = L_FST_SUPC(k);
istart = L_SUB_START(fsupc);
nsupr = L_SUB_START(fsupc+1) - istart;
nsupc = L_FST_SUPC(k+1) - fsupc;
luptr = L_NZ_START(fsupc);
solve_ops += 8 * (nsupr - nsupc) * nsupc;
for (jcol = fsupc; jcol < L_FST_SUPC(k+1); jcol++) {
iptr = istart + nsupc;
for (i = L_NZ_START(jcol) + nsupc;
i < L_NZ_START(jcol+1); i++) {
irow = L_SUB(iptr);
cc_conj(&temp, &Lval[i]);
cc_mult(&comp_zero, &x[irow], &temp);
c_sub(&x[jcol], &x[jcol], &comp_zero);
iptr++;
}
}
if ( nsupc > 1 ) {
solve_ops += 4 * nsupc * (nsupc - 1);
#ifdef _CRAY
ftcs1 = _cptofcd("L", strlen("L"));
ftcs2 = _cptofcd(trans, strlen("T"));
ftcs3 = _cptofcd("U", strlen("U"));
CTRSV(ftcs1, ftcs2, ftcs3, &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#else
ctrsv_("L", trans, "U", &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#endif
}
}
} else {
/* Form x := conj(inv(U'))*x */
if ( U->nrow == 0 ) return 0; /* Quick return */
for (k = 0; k <= Lstore->nsuper; k++) {
fsupc = L_FST_SUPC(k);
nsupr = L_SUB_START(fsupc+1) - L_SUB_START(fsupc);
nsupc = L_FST_SUPC(k+1) - fsupc;
luptr = L_NZ_START(fsupc);
for (jcol = fsupc; jcol < L_FST_SUPC(k+1); jcol++) {
solve_ops += 8*(U_NZ_START(jcol+1) - U_NZ_START(jcol));
for (i = U_NZ_START(jcol); i < U_NZ_START(jcol+1); i++) {
irow = U_SUB(i);
cc_conj(&temp, &Uval[i]);
cc_mult(&comp_zero, &x[irow], &temp);
c_sub(&x[jcol], &x[jcol], &comp_zero);
}
}
/* 1 c_div costs 10 flops */
solve_ops += 4 * nsupc * (nsupc + 1) + 10 * nsupc;
if ( nsupc == 1 ) {
cc_conj(&temp, &Lval[luptr]);
c_div(&x[fsupc], &x[fsupc], &temp);
} else {
#ifdef _CRAY
ftcs1 = _cptofcd("U", strlen("U"));
ftcs2 = _cptofcd(trans, strlen("T"));
ftcs3 = _cptofcd("N", strlen("N"));
CTRSV( ftcs1, ftcs2, ftcs3, &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#else
ctrsv_("U", trans, "N", &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#endif
}
} /* for k ... */
}
}
stat->ops[SOLVE] += solve_ops;
SUPERLU_FREE(work);
return 0;
}
int
pcgstrf_snode_bmod(
const int pnum, /* process number */
const int jcol, /* in - current column in the s-node */
const int jsupno, /* in */
const int fsupc, /* in - first column in the s-node */
complex *dense, /* in */
complex *tempv, /* working array */
GlobalLU_t *Glu, /* modified */
Gstat_t *Gstat /* modified */
)
{
/*
* -- SuperLU MT routine (version 2.0) --
* Lawrence Berkeley National Lab, Univ. of California Berkeley,
* and Xerox Palo Alto Research Center.
* September 10, 2007
*
* Performs numeric block updates within the relaxed supernode.
*/
complex zero = {0.0, 0.0};
complex one = {1.0, 0.0};
complex none = {-1.0, 0.0};
#if ( MACH==CRAY_PVP )
_fcd ftcs1, ftcs2, ftcs3;
#endif
#ifdef USE_VENDOR_BLAS
int incx = 1, incy = 1;
complex alpha = none, beta = one;
#endif
int luptr, nsupc, nsupr, nrow;
int isub, irow, i, iptr;
register int ufirst, nextlu;
complex *lusup;
int *lsub, *xlsub, *xlsub_end, *xlusup, *xlusup_end;
register float flopcnt;
lsub = Glu->lsub;
xlsub = Glu->xlsub;
xlsub_end = Glu->xlsub_end;
lusup = Glu->lusup;
xlusup = Glu->xlusup;
xlusup_end = Glu->xlusup_end;
nextlu = xlusup[jcol];
/*
* Process the supernodal portion of L\U[*,j]
*/
for (isub = xlsub[fsupc]; isub < xlsub_end[fsupc]; isub++) {
irow = lsub[isub];
lusup[nextlu] = dense[irow];
dense[irow] = zero;
++nextlu;
}
xlusup_end[jcol] = nextlu;
if ( fsupc < jcol ) {
luptr = xlusup[fsupc];
nsupr = xlsub_end[fsupc] - xlsub[fsupc];
nsupc = jcol - fsupc; /* Excluding jcol */
ufirst = xlusup[jcol]; /* Points to the beginning of column
jcol in supernode L\U(jsupno). */
nrow = nsupr - nsupc;
flopcnt = nsupc * (nsupc - 1) + 2 * nrow * nsupc; //sj
Gstat->procstat[pnum].fcops += flopcnt;
/* ops[TRSV] += nsupc * (nsupc - 1);
ops[GEMV] += 2 * nrow * nsupc; */
#ifdef USE_VENDOR_BLAS
#if ( MACH==CRAY_PVP )
ftcs1 = _cptofcd("L", strlen("L"));
ftcs2 = _cptofcd("N", strlen("N"));
ftcs3 = _cptofcd("U", strlen("U"));
CTRSV( ftcs1, ftcs2, ftcs3, &nsupc, &lusup[luptr], &nsupr,
&lusup[ufirst], &incx );
CGEMV( ftcs2, &nrow, &nsupc, &alpha, &lusup[luptr+nsupc], &nsupr,
&lusup[ufirst], &incx, &beta, &lusup[ufirst+nsupc], &incy );
#else
ctrsv_( "L", "N", "U", &nsupc, &lusup[luptr], &nsupr,
&lusup[ufirst], &incx );
cgemv_( "N", &nrow, &nsupc, &alpha, &lusup[luptr+nsupc], &nsupr,
&lusup[ufirst], &incx, &beta, &lusup[ufirst+nsupc], &incy );
#endif
#else
clsolve ( nsupr, nsupc, &lusup[luptr], &lusup[ufirst] );
cmatvec ( nsupr, nrow, nsupc, &lusup[luptr+nsupc],
&lusup[ufirst], &tempv[0] );
/* Scatter tempv[*] into lusup[*] */
iptr = ufirst + nsupc;
for (i = 0; i < nrow; i++) {
c_sub(&lusup[iptr], &lusup[iptr], &tempv[i]);
++iptr;
tempv[i] = zero;
}
#endif
}
return 0;
}
void
pcgstrf_bmod1D(
const int pnum, /* process number */
const int m, /* number of rows in the matrix */
const int w, /* current panel width */
const int jcol, /* leading column of the current panel */
const int fsupc, /* leading column of the updating supernode */
const int krep, /* last column of the updating supernode */
const int nsupc, /* number of columns in the updating s-node */
int nsupr, /* number of rows in the updating supernode */
int nrow, /* number of rows below the diagonal block of
the updating supernode */
int *repfnz, /* in */
int *panel_lsub, /* modified */
int *w_lsub_end, /* modified */
int *spa_marker, /* modified; size n-by-w */
complex *dense, /* modified */
complex *tempv, /* working array - zeros on entry/exit */
GlobalLU_t *Glu, /* modified */
Gstat_t *Gstat /* modified */
)
{
/*
* -- SuperLU MT routine (version 2.0) --
* Lawrence Berkeley National Lab, Univ. of California Berkeley,
* and Xerox Palo Alto Research Center.
* September 10, 2007
*
* Purpose
* =======
*
* Performs numeric block updates (sup-panel) in topological order.
* It features: col-col, 2cols-col, 3cols-col, and sup-col updates.
* Results are returned in SPA dense[*,w].
*
*/
#if ( MACH==CRAY_PVP )
_fcd ftcs1 = _cptofcd("L", strlen("L")),
ftcs2 = _cptofcd("N", strlen("N")),
ftcs3 = _cptofcd("U", strlen("U"));
#endif
#ifdef USE_VENDOR_BLAS
int incx = 1, incy = 1;
complex alpha, beta;
#endif
complex ukj, ukj1, ukj2;
int luptr, luptr1, luptr2;
int segsze;
register int lptr; /* start of row subscripts of the updating supernode */
register int i, krep_ind, kfnz, isub, irow, no_zeros;
register int jj; /* index through each column in the panel */
int *repfnz_col; /* repfnz[] for a column in the panel */
complex *dense_col; /* dense[] for a column in the panel */
complex *tempv1; /* used to store matrix-vector result */
int *col_marker; /* each column of the spa_marker[*,w] */
int *col_lsub; /* each column of the panel_lsub[*,w] */
int *lsub, *xlsub_end;
complex *lusup;
int *xlusup;
register float flopcnt;
complex zero = {0.0, 0.0};
complex one = {1.0, 0.0};
complex comp_temp, comp_temp1;
#ifdef TIMING
double *utime = Gstat->utime;
double f_time;
#endif
lsub = Glu->lsub;
xlsub_end = Glu->xlsub_end;
lusup = Glu->lusup;
xlusup = Glu->xlusup;
lptr = Glu->xlsub[fsupc];
krep_ind = lptr + nsupc - 1;
/* Pointers to each column of the w-wide arrays. */
repfnz_col= repfnz;
dense_col = dense;
col_marker= spa_marker;
col_lsub = panel_lsub;
#if ( DEBUGlevel>=2 )
if (jcol == BADPAN && krep == BADREP) {
printf("(%d) pcgstrf_bmod1D[1] jcol %d, fsupc %d, krep %d, nsupc %d, nsupr %d, nrow %d\n",
pnum, jcol, fsupc, krep, nsupc, nsupr, nrow);
PrintInt10("lsub[xlsub[2774]]", nsupr, &lsub[lptr]);
}
#endif
/*
* Sequence through each column in the panel ...
*/
for (jj = jcol; jj < jcol + w; ++jj, col_marker += m, col_lsub += m,
repfnz_col += m, dense_col += m) {
kfnz = repfnz_col[krep];
if ( kfnz == EMPTY ) continue; /* Skip any zero segment */
segsze = krep - kfnz + 1;
luptr = xlusup[fsupc];
/* Calculate flops: tri-solve + mat-vector */
Gstat->procstat[pnum].fcops += flopcnt;
/* Case 1: Update U-segment of size 1 -- col-col update */
if ( segsze == 1 ) {
#ifdef TIMING
f_time = SuperLU_timer_();
#endif
ukj = dense_col[lsub[krep_ind]];
luptr += nsupr*(nsupc-1) + nsupc;
#if ( DEBUGlevel>=2 )
if (krep == BADCOL && jj == -1) {
printf("(%d) pcgstrf_bmod1D[segsze=1]: k %d, j %d, ukj %.10e\n",
pnum, lsub[krep_ind], jj, ukj);
PrintInt10("segsze=1", nsupr, &lsub[lptr]);
}
#endif
for (i = lptr + nsupc; i < xlsub_end[fsupc]; i++) {
irow = lsub[i];
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
c_sub(&dense_col[irow], &dense_col[irow], &comp_temp);
++luptr;
#ifdef SCATTER_FOUND
if ( col_marker[irow] != jj ) {
col_marker[irow] = jj;
col_lsub[w_lsub_end[jj-jcol]++] = irow;
}
#endif
}
#ifdef TIMING
utime[FLOAT] += SuperLU_timer_() - f_time;
#endif
} else if ( segsze <= 3 ) {
#ifdef TIMING
f_time = SuperLU_timer_();
#endif
ukj = dense_col[lsub[krep_ind]];
luptr += nsupr*(nsupc-1) + nsupc-1;
ukj1 = dense_col[lsub[krep_ind - 1]];
luptr1 = luptr - nsupr;
if ( segsze == 2 ) {
cc_mult(&comp_temp, &ukj1, &lusup[luptr1]);
c_sub(&ukj, &ukj, &comp_temp);
dense_col[lsub[krep_ind]] = ukj;
for (i = lptr + nsupc; i < xlsub_end[fsupc]; ++i) {
irow = lsub[i];
++luptr; ++luptr1;
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
cc_mult(&comp_temp1, &ukj1, &lusup[luptr1]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&dense_col[irow], &dense_col[irow], &comp_temp);
#ifdef SCATTER_FOUND
if ( col_marker[irow] != jj ) {
col_marker[irow] = jj;
col_lsub[w_lsub_end[jj-jcol]++] = irow;
}
#endif
}
} else {
ukj2 = dense_col[lsub[krep_ind - 2]];
luptr2 = luptr1 - nsupr;
cc_mult(&comp_temp, &ukj2, &lusup[luptr2-1]);
c_sub(&ukj1, &ukj1, &comp_temp);
cc_mult(&comp_temp, &ukj1, &lusup[luptr1]);
cc_mult(&comp_temp1, &ukj2, &lusup[luptr2]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&ukj, &ukj, &comp_temp);
dense_col[lsub[krep_ind]] = ukj;
dense_col[lsub[krep_ind-1]] = ukj1;
for (i = lptr + nsupc; i < xlsub_end[fsupc]; ++i) {
irow = lsub[i];
++luptr; ++luptr1; ++luptr2;
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
cc_mult(&comp_temp1, &ukj1, &lusup[luptr1]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
cc_mult(&comp_temp1, &ukj2, &lusup[luptr2]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&dense_col[irow], &dense_col[irow], &comp_temp);
#ifdef SCATTER_FOUND
if ( col_marker[irow] != jj ) {
col_marker[irow] = jj;
col_lsub[w_lsub_end[jj-jcol]++] = irow;
}
#endif
}
}
#ifdef TIMING
utime[FLOAT] += SuperLU_timer_() - f_time;
#endif
} else { /* segsze >= 4 */
/*
* Perform a triangular solve and matrix-vector update,
* then scatter the result of sup-col update to dense[*].
*/
no_zeros = kfnz - fsupc;
/* Gather U[*,j] segment from dense[*] to tempv[*]:
* The result of triangular solve is in tempv[*];
* The result of matrix vector update is in dense_col[*]
*/
isub = lptr + no_zeros;
/*#pragma ivdep*/
for (i = 0; i < segsze; ++i) {
irow = lsub[isub];
tempv[i] = dense_col[irow]; /* Gather */
++isub;
}
/* start effective triangle */
luptr += nsupr * no_zeros + no_zeros;
#ifdef TIMING
f_time = SuperLU_timer_();
#endif
#ifdef USE_VENDOR_BLAS
#if ( MACH==CRAY_PVP )
CTRSV( ftcs1, ftcs2, ftcs3, &segsze, &lusup[luptr],
&nsupr, tempv, &incx );
#else
ctrsv_( "L", "N", "U", &segsze, &lusup[luptr],
&nsupr, tempv, &incx );
#endif
luptr += segsze; /* Dense matrix-vector */
tempv1 = &tempv[segsze];
alpha = one;
beta = zero;
#if ( MACH==CRAY_PVP )
CGEMV( ftcs2, &nrow, &segsze, &alpha, &lusup[luptr],
&nsupr, tempv, &incx, &beta, tempv1, &incy );
#else
cgemv_( "N", &nrow, &segsze, &alpha, &lusup[luptr],
&nsupr, tempv, &incx, &beta, tempv1, &incy );
#endif /* _CRAY_PVP */
#else
clsolve ( nsupr, segsze, &lusup[luptr], tempv );
luptr += segsze; /* Dense matrix-vector */
tempv1 = &tempv[segsze];
cmatvec (nsupr, nrow, segsze, &lusup[luptr], tempv, tempv1);
#endif
#ifdef TIMING
utime[FLOAT] += SuperLU_timer_() - f_time;
#endif
/* Scatter tempv[*] into SPA dense[*] temporarily,
* such that tempv[*] can be used for the triangular solve of
* the next column of the panel. They will be copied into
* ucol[*] after the whole panel has been finished.
*/
isub = lptr + no_zeros;
/*#pragma ivdep*/
for (i = 0; i < segsze; i++) {
irow = lsub[isub];
dense_col[irow] = tempv[i]; /* Scatter */
tempv[i] = zero;
isub++;
#if ( DEBUGlevel>=2 )
if (jj == -1 && krep == 3423)
printf("(%d) pcgstrf_bmod1D[scatter] jj %d, dense_col[%d] %e\n",
pnum, jj, irow, dense_col[irow]);
#endif
}
/* Scatter the update from tempv1[*] into SPA dense[*] */
/*#pragma ivdep*/
for (i = 0; i < nrow; i++) {
irow = lsub[isub];
c_sub(&dense_col[irow], &dense_col[irow],
&tempv1[i]); /* Scatter-add */
#ifdef SCATTER_FOUND
if ( col_marker[irow] != jj ) {
col_marker[irow] = jj;
col_lsub[w_lsub_end[jj-jcol]++] = irow;
}
#endif
tempv1[i] = zero;
isub++;
}
} /* else segsze >= 4 ... */
} /* for jj ... */
}
/* Return value: 0 - successful return
* > 0 - number of bytes allocated when run out of space
*/
int
ccolumn_bmod (
const int jcol, /* in */
const int nseg, /* in */
complex *dense, /* in */
complex *tempv, /* working array */
int *segrep, /* in */
int *repfnz, /* in */
int fpanelc, /* in -- first column in the current panel */
GlobalLU_t *Glu, /* modified */
SuperLUStat_t *stat /* output */
)
{
/*
* Purpose:
* ========
* Performs numeric block updates (sup-col) in topological order.
* It features: col-col, 2cols-col, 3cols-col, and sup-col updates.
* Special processing on the supernodal portion of L\U[*,j]
*
*/
#ifdef _CRAY
_fcd ftcs1 = _cptofcd("L", strlen("L")),
ftcs2 = _cptofcd("N", strlen("N")),
ftcs3 = _cptofcd("U", strlen("U"));
#endif
int incx = 1, incy = 1;
complex alpha, beta;
/* krep = representative of current k-th supernode
* fsupc = first supernodal column
* nsupc = no of columns in supernode
* nsupr = no of rows in supernode (used as leading dimension)
* luptr = location of supernodal LU-block in storage
* kfnz = first nonz in the k-th supernodal segment
* no_zeros = no of leading zeros in a supernodal U-segment
*/
complex ukj, ukj1, ukj2;
int luptr, luptr1, luptr2;
int fsupc, nsupc, nsupr, segsze;
int nrow; /* No of rows in the matrix of matrix-vector */
int jcolp1, jsupno, k, ksub, krep, krep_ind, ksupno;
register int lptr, kfnz, isub, irow, i;
register int no_zeros, new_next;
int ufirst, nextlu;
int fst_col; /* First column within small LU update */
int d_fsupc; /* Distance between the first column of the current
panel and the first column of the current snode. */
int *xsup, *supno;
int *lsub, *xlsub;
complex *lusup;
int *xlusup;
int nzlumax;
complex *tempv1;
complex zero = {0.0, 0.0};
complex one = {1.0, 0.0};
complex none = {-1.0, 0.0};
complex comp_temp, comp_temp1;
int mem_error;
flops_t *ops = stat->ops;
xsup = Glu->xsup;
supno = Glu->supno;
lsub = Glu->lsub;
xlsub = Glu->xlsub;
lusup = Glu->lusup;
xlusup = Glu->xlusup;
nzlumax = Glu->nzlumax;
jcolp1 = jcol + 1;
jsupno = supno[jcol];
/*
* For each nonz supernode segment of U[*,j] in topological order
*/
k = nseg - 1;
for (ksub = 0; ksub < nseg; ksub++) {
krep = segrep[k];
k--;
ksupno = supno[krep];
if ( jsupno != ksupno ) { /* Outside the rectangular supernode */
fsupc = xsup[ksupno];
fst_col = SUPERLU_MAX ( fsupc, fpanelc );
/* Distance from the current supernode to the current panel;
d_fsupc=0 if fsupc > fpanelc. */
d_fsupc = fst_col - fsupc;
luptr = xlusup[fst_col] + d_fsupc;
lptr = xlsub[fsupc] + d_fsupc;
kfnz = repfnz[krep];
kfnz = SUPERLU_MAX ( kfnz, fpanelc );
segsze = krep - kfnz + 1;
nsupc = krep - fst_col + 1;
nsupr = xlsub[fsupc+1] - xlsub[fsupc]; /* Leading dimension */
nrow = nsupr - d_fsupc - nsupc;
krep_ind = lptr + nsupc - 1;
/*
* Case 1: Update U-segment of size 1 -- col-col update
*/
if ( segsze == 1 ) {
ukj = dense[lsub[krep_ind]];
luptr += nsupr*(nsupc-1) + nsupc;
for (i = lptr + nsupc; i < xlsub[fsupc+1]; ++i) {
irow = lsub[i];
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
c_sub(&dense[irow], &dense[irow], &comp_temp);
luptr++;
}
} else if ( segsze <= 3 ) {
ukj = dense[lsub[krep_ind]];
luptr += nsupr*(nsupc-1) + nsupc-1;
ukj1 = dense[lsub[krep_ind - 1]];
luptr1 = luptr - nsupr;
if ( segsze == 2 ) { /* Case 2: 2cols-col update */
cc_mult(&comp_temp, &ukj1, &lusup[luptr1]);
c_sub(&ukj, &ukj, &comp_temp);
dense[lsub[krep_ind]] = ukj;
for (i = lptr + nsupc; i < xlsub[fsupc+1]; ++i) {
irow = lsub[i];
luptr++;
luptr1++;
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
cc_mult(&comp_temp1, &ukj1, &lusup[luptr1]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&dense[irow], &dense[irow], &comp_temp);
}
} else { /* Case 3: 3cols-col update */
ukj2 = dense[lsub[krep_ind - 2]];
luptr2 = luptr1 - nsupr;
cc_mult(&comp_temp, &ukj2, &lusup[luptr2-1]);
c_sub(&ukj1, &ukj1, &comp_temp);
cc_mult(&comp_temp, &ukj1, &lusup[luptr1]);
cc_mult(&comp_temp1, &ukj2, &lusup[luptr2]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&ukj, &ukj, &comp_temp);
dense[lsub[krep_ind]] = ukj;
dense[lsub[krep_ind-1]] = ukj1;
for (i = lptr + nsupc; i < xlsub[fsupc+1]; ++i) {
irow = lsub[i];
luptr++;
luptr1++;
luptr2++;
cc_mult(&comp_temp, &ukj, &lusup[luptr]);
cc_mult(&comp_temp1, &ukj1, &lusup[luptr1]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
cc_mult(&comp_temp1, &ukj2, &lusup[luptr2]);
c_add(&comp_temp, &comp_temp, &comp_temp1);
c_sub(&dense[irow], &dense[irow], &comp_temp);
}
}
} else {
/*
* Case: sup-col update
* Perform a triangular solve and block update,
* then scatter the result of sup-col update to dense
*/
no_zeros = kfnz - fst_col;
/* Copy U[*,j] segment from dense[*] to tempv[*] */
isub = lptr + no_zeros;
for (i = 0; i < segsze; i++) {
irow = lsub[isub];
tempv[i] = dense[irow];
++isub;
}
/* Dense triangular solve -- start effective triangle */
luptr += nsupr * no_zeros + no_zeros;
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
CTRSV( ftcs1, ftcs2, ftcs3, &segsze, &lusup[luptr],
&nsupr, tempv, &incx );
#else
ctrsv_( "L", "N", "U", &segsze, &lusup[luptr],
&nsupr, tempv, &incx );
#endif
luptr += segsze; /* Dense matrix-vector */
tempv1 = &tempv[segsze];
alpha = one;
beta = zero;
#ifdef _CRAY
CGEMV( ftcs2, &nrow, &segsze, &alpha, &lusup[luptr],
&nsupr, tempv, &incx, &beta, tempv1, &incy );
#else
cgemv_( "N", &nrow, &segsze, &alpha, &lusup[luptr],
&nsupr, tempv, &incx, &beta, tempv1, &incy );
#endif
#else
clsolve ( nsupr, segsze, &lusup[luptr], tempv );
luptr += segsze; /* Dense matrix-vector */
tempv1 = &tempv[segsze];
cmatvec (nsupr, nrow , segsze, &lusup[luptr], tempv, tempv1);
#endif
/* Scatter tempv[] into SPA dense[] as a temporary storage */
isub = lptr + no_zeros;
for (i = 0; i < segsze; i++) {
irow = lsub[isub];
dense[irow] = tempv[i];
tempv[i] = zero;
++isub;
}
/* Scatter tempv1[] into SPA dense[] */
for (i = 0; i < nrow; i++) {
irow = lsub[isub];
c_sub(&dense[irow], &dense[irow], &tempv1[i]);
tempv1[i] = zero;
++isub;
}
}
} /* if jsupno ... */
} /* for each segment... */
/*
* Process the supernodal portion of L\U[*,j]
*/
nextlu = xlusup[jcol];
fsupc = xsup[jsupno];
/* Copy the SPA dense into L\U[*,j] */
new_next = nextlu + xlsub[fsupc+1] - xlsub[fsupc];
while ( new_next > nzlumax ) {
if (mem_error = cLUMemXpand(jcol, nextlu, LUSUP, &nzlumax, Glu))
return (mem_error);
lusup = Glu->lusup;
lsub = Glu->lsub;
}
for (isub = xlsub[fsupc]; isub < xlsub[fsupc+1]; isub++) {
irow = lsub[isub];
lusup[nextlu] = dense[irow];
dense[irow] = zero;
++nextlu;
}
xlusup[jcolp1] = nextlu; /* Close L\U[*,jcol] */
/* For more updates within the panel (also within the current supernode),
* should start from the first column of the panel, or the first column
* of the supernode, whichever is bigger. There are 2 cases:
* 1) fsupc < fpanelc, then fst_col := fpanelc
* 2) fsupc >= fpanelc, then fst_col := fsupc
*/
fst_col = SUPERLU_MAX ( fsupc, fpanelc );
if ( fst_col < jcol ) {
/* Distance between the current supernode and the current panel.
d_fsupc=0 if fsupc >= fpanelc. */
d_fsupc = fst_col - fsupc;
lptr = xlsub[fsupc] + d_fsupc;
luptr = xlusup[fst_col] + d_fsupc;
nsupr = xlsub[fsupc+1] - xlsub[fsupc]; /* Leading dimension */
nsupc = jcol - fst_col; /* Excluding jcol */
nrow = nsupr - d_fsupc - nsupc;
/* Points to the beginning of jcol in snode L\U(jsupno) */
ufirst = xlusup[jcol] + d_fsupc;
ops[TRSV] += 4 * nsupc * (nsupc - 1);
ops[GEMV] += 8 * nrow * nsupc;
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
CTRSV( ftcs1, ftcs2, ftcs3, &nsupc, &lusup[luptr],
&nsupr, &lusup[ufirst], &incx );
#else
ctrsv_( "L", "N", "U", &nsupc, &lusup[luptr],
&nsupr, &lusup[ufirst], &incx );
#endif
alpha = none; beta = one; /* y := beta*y + alpha*A*x */
#ifdef _CRAY
CGEMV( ftcs2, &nrow, &nsupc, &alpha, &lusup[luptr+nsupc], &nsupr,
&lusup[ufirst], &incx, &beta, &lusup[ufirst+nsupc], &incy );
#else
cgemv_( "N", &nrow, &nsupc, &alpha, &lusup[luptr+nsupc], &nsupr,
&lusup[ufirst], &incx, &beta, &lusup[ufirst+nsupc], &incy );
#endif
#else
clsolve ( nsupr, nsupc, &lusup[luptr], &lusup[ufirst] );
cmatvec ( nsupr, nrow, nsupc, &lusup[luptr+nsupc],
&lusup[ufirst], tempv );
/* Copy updates from tempv[*] into lusup[*] */
isub = ufirst + nsupc;
for (i = 0; i < nrow; i++) {
c_sub(&lusup[isub], &lusup[isub], &tempv[i]);
tempv[i] = zero;
++isub;
}
#endif
} /* if fst_col < jcol ... */
return 0;
}
void
cgstrs (trans_t trans, SuperMatrix *L, SuperMatrix *U,
int *perm_c, int *perm_r, SuperMatrix *B,
SuperLUStat_t *stat, int *info)
{
#ifdef _CRAY
_fcd ftcs1, ftcs2, ftcs3, ftcs4;
#endif
int incx = 1, incy = 1;
#ifdef USE_VENDOR_BLAS
complex alpha = {1.0, 0.0}, beta = {1.0, 0.0};
complex *work_col;
#endif
complex temp_comp;
DNformat *Bstore;
complex *Bmat;
SCformat *Lstore;
NCformat *Ustore;
complex *Lval, *Uval;
int fsupc, nrow, nsupr, nsupc, luptr, istart, irow;
int i, j, k, iptr, jcol, n, ldb, nrhs;
complex *work, *rhs_work, *soln;
flops_t solve_ops;
void cprint_soln();
/* Test input parameters ... */
*info = 0;
Bstore = B->Store;
ldb = Bstore->lda;
nrhs = B->ncol;
if ( trans != NOTRANS && trans != TRANS && trans != CONJ ) *info = -1;
else if ( L->nrow != L->ncol || L->nrow < 0 ||
L->Stype != SLU_SC || L->Dtype != SLU_C || L->Mtype != SLU_TRLU )
*info = -2;
else if ( U->nrow != U->ncol || U->nrow < 0 ||
U->Stype != SLU_NC || U->Dtype != SLU_C || U->Mtype != SLU_TRU )
*info = -3;
else if ( ldb < SUPERLU_MAX(0, L->nrow) ||
B->Stype != SLU_DN || B->Dtype != SLU_C || B->Mtype != SLU_GE )
*info = -6;
if ( *info ) {
i = -(*info);
xerbla_("cgstrs", &i);
return;
}
n = L->nrow;
work = complexCalloc(n * nrhs);
if ( !work ) ABORT("Malloc fails for local work[].");
soln = complexMalloc(n);
if ( !soln ) ABORT("Malloc fails for local soln[].");
Bmat = Bstore->nzval;
Lstore = L->Store;
Lval = Lstore->nzval;
Ustore = U->Store;
Uval = Ustore->nzval;
solve_ops = 0;
if ( trans == NOTRANS ) {
/* Permute right hand sides to form Pr*B */
for (i = 0; i < nrhs; i++) {
rhs_work = &Bmat[i*ldb];
for (k = 0; k < n; k++) soln[perm_r[k]] = rhs_work[k];
for (k = 0; k < n; k++) rhs_work[k] = soln[k];
}
/* Forward solve PLy=Pb. */
for (k = 0; k <= Lstore->nsuper; k++) {
fsupc = L_FST_SUPC(k);
istart = L_SUB_START(fsupc);
nsupr = L_SUB_START(fsupc+1) - istart;
nsupc = L_FST_SUPC(k+1) - fsupc;
nrow = nsupr - nsupc;
solve_ops += 4 * nsupc * (nsupc - 1) * nrhs;
solve_ops += 8 * nrow * nsupc * nrhs;
if ( nsupc == 1 ) {
for (j = 0; j < nrhs; j++) {
rhs_work = &Bmat[j*ldb];
luptr = L_NZ_START(fsupc);
for (iptr=istart+1; iptr < L_SUB_START(fsupc+1); iptr++){
irow = L_SUB(iptr);
++luptr;
cc_mult(&temp_comp, &rhs_work[fsupc], &Lval[luptr]);
c_sub(&rhs_work[irow], &rhs_work[irow], &temp_comp);
}
}
} else {
luptr = L_NZ_START(fsupc);
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
ftcs1 = _cptofcd("L", strlen("L"));
ftcs2 = _cptofcd("N", strlen("N"));
ftcs3 = _cptofcd("U", strlen("U"));
CTRSM( ftcs1, ftcs1, ftcs2, ftcs3, &nsupc, &nrhs, &alpha,
&Lval[luptr], &nsupr, &Bmat[fsupc], &ldb);
CGEMM( ftcs2, ftcs2, &nrow, &nrhs, &nsupc, &alpha,
&Lval[luptr+nsupc], &nsupr, &Bmat[fsupc], &ldb,
&beta, &work[0], &n );
#else
ctrsm_("L", "L", "N", "U", &nsupc, &nrhs, &alpha,
&Lval[luptr], &nsupr, &Bmat[fsupc], &ldb);
cgemm_( "N", "N", &nrow, &nrhs, &nsupc, &alpha,
&Lval[luptr+nsupc], &nsupr, &Bmat[fsupc], &ldb,
&beta, &work[0], &n );
#endif
for (j = 0; j < nrhs; j++) {
rhs_work = &Bmat[j*ldb];
work_col = &work[j*n];
iptr = istart + nsupc;
for (i = 0; i < nrow; i++) {
irow = L_SUB(iptr);
c_sub(&rhs_work[irow], &rhs_work[irow], &work_col[i]);
work_col[i].r = 0.0;
work_col[i].i = 0.0;
iptr++;
}
}
#else
for (j = 0; j < nrhs; j++) {
rhs_work = &Bmat[j*ldb];
clsolve (nsupr, nsupc, &Lval[luptr], &rhs_work[fsupc]);
cmatvec (nsupr, nrow, nsupc, &Lval[luptr+nsupc],
&rhs_work[fsupc], &work[0] );
iptr = istart + nsupc;
for (i = 0; i < nrow; i++) {
irow = L_SUB(iptr);
c_sub(&rhs_work[irow], &rhs_work[irow], &work[i]);
work[i].r = 0.;
work[i].i = 0.;
iptr++;
}
}
#endif
} /* else ... */
} /* for L-solve */
#ifdef DEBUG
printf("After L-solve: y=\n");
cprint_soln(n, nrhs, Bmat);
#endif
/*
* Back solve Ux=y.
*/
for (k = Lstore->nsuper; k >= 0; k--) {
fsupc = L_FST_SUPC(k);
istart = L_SUB_START(fsupc);
nsupr = L_SUB_START(fsupc+1) - istart;
nsupc = L_FST_SUPC(k+1) - fsupc;
luptr = L_NZ_START(fsupc);
solve_ops += 4 * nsupc * (nsupc + 1) * nrhs;
if ( nsupc == 1 ) {
rhs_work = &Bmat[0];
for (j = 0; j < nrhs; j++) {
c_div(&rhs_work[fsupc], &rhs_work[fsupc], &Lval[luptr]);
rhs_work += ldb;
}
} else {
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
ftcs1 = _cptofcd("L", strlen("L"));
ftcs2 = _cptofcd("U", strlen("U"));
ftcs3 = _cptofcd("N", strlen("N"));
CTRSM( ftcs1, ftcs2, ftcs3, ftcs3, &nsupc, &nrhs, &alpha,
&Lval[luptr], &nsupr, &Bmat[fsupc], &ldb);
#else
ctrsm_("L", "U", "N", "N", &nsupc, &nrhs, &alpha,
&Lval[luptr], &nsupr, &Bmat[fsupc], &ldb);
#endif
#else
for (j = 0; j < nrhs; j++)
cusolve ( nsupr, nsupc, &Lval[luptr], &Bmat[fsupc+j*ldb] );
#endif
}
for (j = 0; j < nrhs; ++j) {
rhs_work = &Bmat[j*ldb];
for (jcol = fsupc; jcol < fsupc + nsupc; jcol++) {
solve_ops += 8*(U_NZ_START(jcol+1) - U_NZ_START(jcol));
for (i = U_NZ_START(jcol); i < U_NZ_START(jcol+1); i++ ){
irow = U_SUB(i);
cc_mult(&temp_comp, &rhs_work[jcol], &Uval[i]);
c_sub(&rhs_work[irow], &rhs_work[irow], &temp_comp);
}
}
}
} /* for U-solve */
#ifdef DEBUG
printf("After U-solve: x=\n");
cprint_soln(n, nrhs, Bmat);
#endif
/* Compute the final solution X := Pc*X. */
for (i = 0; i < nrhs; i++) {
rhs_work = &Bmat[i*ldb];
for (k = 0; k < n; k++) soln[k] = rhs_work[perm_c[k]];
for (k = 0; k < n; k++) rhs_work[k] = soln[k];
}
stat->ops[SOLVE] = solve_ops;
} else { /* Solve A'*X=B or CONJ(A)*X=B */
/* Permute right hand sides to form Pc'*B. */
for (i = 0; i < nrhs; i++) {
rhs_work = &Bmat[i*ldb];
for (k = 0; k < n; k++) soln[perm_c[k]] = rhs_work[k];
for (k = 0; k < n; k++) rhs_work[k] = soln[k];
}
stat->ops[SOLVE] = 0;
if (trans == TRANS) {
for (k = 0; k < nrhs; ++k) {
/* Multiply by inv(U'). */
sp_ctrsv("U", "T", "N", L, U, &Bmat[k*ldb], stat, info);
/* Multiply by inv(L'). */
sp_ctrsv("L", "T", "U", L, U, &Bmat[k*ldb], stat, info);
}
} else { /* trans == CONJ */
for (k = 0; k < nrhs; ++k) {
/* Multiply by conj(inv(U')). */
sp_ctrsv("U", "C", "N", L, U, &Bmat[k*ldb], stat, info);
/* Multiply by conj(inv(L')). */
sp_ctrsv("L", "C", "U", L, U, &Bmat[k*ldb], stat, info);
}
}
/* Compute the final solution X := Pr'*X (=inv(Pr)*X) */
for (i = 0; i < nrhs; i++) {
rhs_work = &Bmat[i*ldb];
for (k = 0; k < n; k++) soln[k] = rhs_work[perm_r[k]];
for (k = 0; k < n; k++) rhs_work[k] = soln[k];
}
}
SUPERLU_FREE(work);
SUPERLU_FREE(soln);
}
int
sp_ctrsv(char *uplo, char *trans, char *diag, SuperMatrix *L,
SuperMatrix *U, complex *x, int *info)
{
/*
* Purpose
* =======
*
* sp_ctrsv() solves one of the systems of equations
* A*x = b, or A'*x = b,
* where b and x are n element vectors and A is a sparse unit , or
* non-unit, upper or lower triangular matrix.
* No test for singularity or near-singularity is included in this
* routine. Such tests must be performed before calling this routine.
*
* Parameters
* ==========
*
* uplo - (input) char*
* On entry, uplo specifies whether the matrix is an upper or
* lower triangular matrix as follows:
* uplo = 'U' or 'u' A is an upper triangular matrix.
* uplo = 'L' or 'l' A is a lower triangular matrix.
*
* trans - (input) char*
* On entry, trans specifies the equations to be solved as
* follows:
* trans = 'N' or 'n' A*x = b.
* trans = 'T' or 't' A'*x = b.
* trans = 'C' or 'c' A'*x = b.
*
* diag - (input) char*
* On entry, diag specifies whether or not A is unit
* triangular as follows:
* diag = 'U' or 'u' A is assumed to be unit triangular.
* diag = 'N' or 'n' A is not assumed to be unit
* triangular.
*
* L - (input) SuperMatrix*
* The factor L from the factorization Pr*A*Pc=L*U. Use
* compressed row subscripts storage for supernodes,
* i.e., L has types: Stype = SC, Dtype = SLU_C, Mtype = TRLU.
*
* U - (input) SuperMatrix*
* The factor U from the factorization Pr*A*Pc=L*U.
* U has types: Stype = NC, Dtype = SLU_C, Mtype = TRU.
*
* x - (input/output) complex*
* Before entry, the incremented array X must contain the n
* element right-hand side vector b. On exit, X is overwritten
* with the solution vector x.
*
* info - (output) int*
* If *info = -i, the i-th argument had an illegal value.
*
*/
#ifdef _CRAY
_fcd ftcs1 = _cptofcd("L", strlen("L")),
ftcs2 = _cptofcd("N", strlen("N")),
ftcs3 = _cptofcd("U", strlen("U"));
#endif
SCformat *Lstore;
NCformat *Ustore;
complex *Lval, *Uval;
int incx = 1, incy = 1;
complex alpha = {1.0, 0.0}, beta = {1.0, 0.0};
complex comp_zero = {0.0, 0.0};
int nrow;
int fsupc, nsupr, nsupc, luptr, istart, irow;
int i, k, iptr, jcol;
complex *work;
flops_t solve_ops;
extern SuperLUStat_t SuperLUStat;
/* Test the input parameters */
*info = 0;
if ( !lsame_(uplo,"L") && !lsame_(uplo, "U") ) *info = -1;
else if ( !lsame_(trans, "N") && !lsame_(trans, "T") ) *info = -2;
else if ( !lsame_(diag, "U") && !lsame_(diag, "N") ) *info = -3;
else if ( L->nrow != L->ncol || L->nrow < 0 ) *info = -4;
else if ( U->nrow != U->ncol || U->nrow < 0 ) *info = -5;
if ( *info ) {
i = -(*info);
xerbla_("sp_ctrsv", &i);
return 0;
}
Lstore = L->Store;
Lval = Lstore->nzval;
Ustore = U->Store;
Uval = Ustore->nzval;
solve_ops = 0;
if ( !(work = complexCalloc(L->nrow)) )
ABORT("Malloc fails for work in sp_ctrsv().");
if ( lsame_(trans, "N") ) { /* Form x := inv(A)*x. */
if ( lsame_(uplo, "L") ) {
/* Form x := inv(L)*x */
if ( L->nrow == 0 ) return 0; /* Quick return */
for (k = 0; k <= Lstore->nsuper; k++) {
fsupc = L_FST_SUPC(k);
istart = L_SUB_START(fsupc);
nsupr = L_SUB_START(fsupc+1) - istart;
nsupc = L_FST_SUPC(k+1) - fsupc;
luptr = L_NZ_START(fsupc);
nrow = nsupr - nsupc;
solve_ops += 4 * nsupc * (nsupc - 1);
solve_ops += 8 * nrow * nsupc;
if ( nsupc == 1 ) {
for (iptr=istart+1; iptr < L_SUB_START(fsupc+1); ++iptr) {
irow = L_SUB(iptr);
++luptr;
cc_mult(&comp_zero, &x[fsupc], &Lval[luptr]);
c_sub(&x[irow], &x[irow], &comp_zero);
}
} else {
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
CTRSV(ftcs1, ftcs2, ftcs3, &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
CGEMV(ftcs2, &nrow, &nsupc, &alpha, &Lval[luptr+nsupc],
&nsupr, &x[fsupc], &incx, &beta, &work[0], &incy);
#else
ctrsv_("L", "N", "U", &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
cgemv_("N", &nrow, &nsupc, &alpha, &Lval[luptr+nsupc],
&nsupr, &x[fsupc], &incx, &beta, &work[0], &incy);
#endif
#else
clsolve ( nsupr, nsupc, &Lval[luptr], &x[fsupc]);
cmatvec ( nsupr, nsupr-nsupc, nsupc, &Lval[luptr+nsupc],
&x[fsupc], &work[0] );
#endif
iptr = istart + nsupc;
for (i = 0; i < nrow; ++i, ++iptr) {
irow = L_SUB(iptr);
c_sub(&x[irow], &x[irow], &work[i]); /* Scatter */
work[i] = comp_zero;
}
}
} /* for k ... */
} else {
/* Form x := inv(U)*x */
if ( U->nrow == 0 ) return 0; /* Quick return */
for (k = Lstore->nsuper; k >= 0; k--) {
fsupc = L_FST_SUPC(k);
nsupr = L_SUB_START(fsupc+1) - L_SUB_START(fsupc);
nsupc = L_FST_SUPC(k+1) - fsupc;
luptr = L_NZ_START(fsupc);
solve_ops += 4 * nsupc * (nsupc + 1);
if ( nsupc == 1 ) {
c_div(&x[fsupc], &x[fsupc], &Lval[luptr]);
for (i = U_NZ_START(fsupc); i < U_NZ_START(fsupc+1); ++i) {
irow = U_SUB(i);
cc_mult(&comp_zero, &x[fsupc], &Uval[i]);
c_sub(&x[irow], &x[irow], &comp_zero);
}
} else {
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
CTRSV(ftcs3, ftcs2, ftcs2, &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#else
ctrsv_("U", "N", "N", &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#endif
#else
cusolve ( nsupr, nsupc, &Lval[luptr], &x[fsupc] );
#endif
for (jcol = fsupc; jcol < L_FST_SUPC(k+1); jcol++) {
solve_ops += 8*(U_NZ_START(jcol+1) - U_NZ_START(jcol));
for (i = U_NZ_START(jcol); i < U_NZ_START(jcol+1);
i++) {
irow = U_SUB(i);
cc_mult(&comp_zero, &x[jcol], &Uval[i]);
c_sub(&x[irow], &x[irow], &comp_zero);
}
}
}
} /* for k ... */
}
} else { /* Form x := inv(A')*x */
if ( lsame_(uplo, "L") ) {
/* Form x := inv(L')*x */
if ( L->nrow == 0 ) return 0; /* Quick return */
for (k = Lstore->nsuper; k >= 0; --k) {
fsupc = L_FST_SUPC(k);
istart = L_SUB_START(fsupc);
nsupr = L_SUB_START(fsupc+1) - istart;
nsupc = L_FST_SUPC(k+1) - fsupc;
luptr = L_NZ_START(fsupc);
solve_ops += 8 * (nsupr - nsupc) * nsupc;
for (jcol = fsupc; jcol < L_FST_SUPC(k+1); jcol++) {
iptr = istart + nsupc;
for (i = L_NZ_START(jcol) + nsupc;
i < L_NZ_START(jcol+1); i++) {
irow = L_SUB(iptr);
cc_mult(&comp_zero, &x[irow], &Lval[i]);
c_sub(&x[jcol], &x[jcol], &comp_zero);
iptr++;
}
}
if ( nsupc > 1 ) {
solve_ops += 4 * nsupc * (nsupc - 1);
#ifdef _CRAY
ftcs1 = _cptofcd("L", strlen("L"));
ftcs2 = _cptofcd("T", strlen("T"));
ftcs3 = _cptofcd("U", strlen("U"));
CTRSV(ftcs1, ftcs2, ftcs3, &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#else
ctrsv_("L", "T", "U", &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#endif
}
}
} else {
/* Form x := inv(U')*x */
if ( U->nrow == 0 ) return 0; /* Quick return */
for (k = 0; k <= Lstore->nsuper; k++) {
fsupc = L_FST_SUPC(k);
nsupr = L_SUB_START(fsupc+1) - L_SUB_START(fsupc);
nsupc = L_FST_SUPC(k+1) - fsupc;
luptr = L_NZ_START(fsupc);
for (jcol = fsupc; jcol < L_FST_SUPC(k+1); jcol++) {
solve_ops += 8*(U_NZ_START(jcol+1) - U_NZ_START(jcol));
for (i = U_NZ_START(jcol); i < U_NZ_START(jcol+1); i++) {
irow = U_SUB(i);
cc_mult(&comp_zero, &x[irow], &Uval[i]);
c_sub(&x[jcol], &x[jcol], &comp_zero);
}
}
solve_ops += 4 * nsupc * (nsupc + 1);
if ( nsupc == 1 ) {
c_div(&x[fsupc], &x[fsupc], &Lval[luptr]);
} else {
#ifdef _CRAY
ftcs1 = _cptofcd("U", strlen("U"));
ftcs2 = _cptofcd("T", strlen("T"));
ftcs3 = _cptofcd("N", strlen("N"));
CTRSV( ftcs1, ftcs2, ftcs3, &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#else
ctrsv_("U", "T", "N", &nsupc, &Lval[luptr], &nsupr,
&x[fsupc], &incx);
#endif
}
} /* for k ... */
}
}
SuperLUStat.ops[SOLVE] += solve_ops;
SUPERLU_FREE(work);
return 0;
}
/*! \brief Performs numeric block updates within the relaxed snode.
*/
int
csnode_bmod (
const int jcol, /* in */
const int jsupno, /* in */
const int fsupc, /* in */
complex *dense, /* in */
complex *tempv, /* working array */
GlobalLU_t *Glu, /* modified */
SuperLUStat_t *stat /* output */
)
{
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
_fcd ftcs1 = _cptofcd("L", strlen("L")),
ftcs2 = _cptofcd("N", strlen("N")),
ftcs3 = _cptofcd("U", strlen("U"));
#endif
int incx = 1, incy = 1;
complex alpha = {-1.0, 0.0}, beta = {1.0, 0.0};
#endif
complex comp_zero = {0.0, 0.0};
int luptr, nsupc, nsupr, nrow;
int isub, irow, i, iptr;
register int ufirst, nextlu;
int *lsub, *xlsub;
complex *lusup;
int *xlusup;
flops_t *ops = stat->ops;
lsub = Glu->lsub;
xlsub = Glu->xlsub;
lusup = (complex *) Glu->lusup;
xlusup = Glu->xlusup;
nextlu = xlusup[jcol];
/*
* Process the supernodal portion of L\U[*,j]
*/
for (isub = xlsub[fsupc]; isub < xlsub[fsupc+1]; isub++) {
irow = lsub[isub];
lusup[nextlu] = dense[irow];
dense[irow] = comp_zero;
++nextlu;
}
xlusup[jcol + 1] = nextlu; /* Initialize xlusup for next column */
if ( fsupc < jcol ) {
luptr = xlusup[fsupc];
nsupr = xlsub[fsupc+1] - xlsub[fsupc];
nsupc = jcol - fsupc; /* Excluding jcol */
ufirst = xlusup[jcol]; /* Points to the beginning of column
jcol in supernode L\U(jsupno). */
nrow = nsupr - nsupc;
ops[TRSV] += 4 * nsupc * (nsupc - 1);
ops[GEMV] += 8 * nrow * nsupc;
#ifdef USE_VENDOR_BLAS
#ifdef _CRAY
CTRSV( ftcs1, ftcs2, ftcs3, &nsupc, &lusup[luptr], &nsupr,
&lusup[ufirst], &incx );
CGEMV( ftcs2, &nrow, &nsupc, &alpha, &lusup[luptr+nsupc], &nsupr,
&lusup[ufirst], &incx, &beta, &lusup[ufirst+nsupc], &incy );
#else
#if SCIPY_FIX
if (nsupr < nsupc) {
/* Fail early rather than passing in invalid parameters to TRSV. */
ABORT("failed to factorize matrix");
}
#endif
ctrsv_( "L", "N", "U", &nsupc, &lusup[luptr], &nsupr,
&lusup[ufirst], &incx );
cgemv_( "N", &nrow, &nsupc, &alpha, &lusup[luptr+nsupc], &nsupr,
&lusup[ufirst], &incx, &beta, &lusup[ufirst+nsupc], &incy );
#endif
#else
clsolve ( nsupr, nsupc, &lusup[luptr], &lusup[ufirst] );
cmatvec ( nsupr, nrow, nsupc, &lusup[luptr+nsupc],
&lusup[ufirst], &tempv[0] );
/* Scatter tempv[*] into lusup[*] */
iptr = ufirst + nsupc;
for (i = 0; i < nrow; i++) {
c_sub(&lusup[iptr], &lusup[iptr], &tempv[i]);
++iptr;
tempv[i] = comp_zero;
}
#endif
}
return 0;
}
