static void cogland_compositor_create_output (CoglandCompositor *compositor, int x, int y, int width_mm, int height_mm) { CoglandOutput *output = g_slice_new0 (CoglandOutput); CoglFramebuffer *fb; GError *error = NULL; CoglandMode *mode; output->x = x; output->y = y; output->width_mm = width_mm; output->height_mm = height_mm; output->wayland_output.interface = &wl_output_interface; wl_display_add_global (compositor->wayland_display, &wl_output_interface, output, bind_output); output->onscreen = cogl_onscreen_new (compositor->cogl_context, width_mm, height_mm); /* Eventually there will be an implicit allocate on first use so this * will become optional... */ fb = COGL_FRAMEBUFFER (output->onscreen); if (!cogl_framebuffer_allocate (fb, &error)) g_error ("Failed to allocate framebuffer: %s\n", error->message); cogl_onscreen_show (output->onscreen); #if 0 cogl_framebuffer_set_viewport (fb, x, y, width, height); #else cogl_push_framebuffer (fb); cogl_set_viewport (-x, -y, compositor->virtual_width, compositor->virtual_height); cogl_pop_framebuffer (); #endif mode = g_slice_new0 (CoglandMode); mode->flags = 0; mode->width = width_mm; mode->height = height_mm; mode->refresh = 60; output->modes = g_list_prepend (output->modes, mode); compositor->outputs = g_list_prepend (compositor->outputs, output); }
static void paint (TestState *state) { float stage_viewport[4]; CoglMatrix stage_projection; CoglMatrix stage_modelview; paint_test_backface_culling (state); /* * Now repeat the test but rendered to an offscreen * framebuffer. Note that by default the conformance tests are * always run to an offscreen buffer but we might as well have this * check anyway in case it is being run with COGL_TEST_ONSCREEN=1 */ cogl_get_viewport (stage_viewport); cogl_get_projection_matrix (&stage_projection); cogl_get_modelview_matrix (&stage_modelview); cogl_push_framebuffer (state->offscreen); cogl_set_viewport (stage_viewport[0], stage_viewport[1], stage_viewport[2], stage_viewport[3]); cogl_set_projection_matrix (&stage_projection); cogl_set_modelview_matrix (&stage_modelview); paint_test_backface_culling (state); cogl_pop_framebuffer (); /* Incase we want feedback of what was drawn offscreen we draw it * to the stage... */ cogl_set_source_texture (state->offscreen_tex); cogl_rectangle (0, TEXTURE_RENDER_SIZE * 16, stage_viewport[2], stage_viewport[3] + TEXTURE_RENDER_SIZE * 16); validate_result (0); validate_result (16); }
/* XXX: This should be deprecated, and we should expose a way to also * specify an x and y viewport offset */ void cogl_viewport (unsigned int width, unsigned int height) { cogl_set_viewport (0, 0, width, height); }
static void on_paint (ClutterActor *actor, void *state) { float saved_viewport[4]; CoglMatrix saved_projection; CoglMatrix projection; CoglMatrix modelview; guchar *data; CoglHandle tex; CoglHandle offscreen; CoglColor black; float x0; float y0; float width; float height; /* for clearing the offscreen framebuffer to black... */ cogl_color_init_from_4ub (&black, 0x00, 0x00, 0x00, 0xff); cogl_get_viewport (saved_viewport); cogl_get_projection_matrix (&saved_projection); cogl_push_matrix (); cogl_matrix_init_identity (&projection); cogl_matrix_init_identity (&modelview); cogl_set_projection_matrix (&projection); cogl_set_modelview_matrix (&modelview); /* - Create a 100x200 viewport (i.e. smaller than the onscreen framebuffer) * and position it a (20, 10) inside the framebuffer. * - Fill the whole viewport with a purple rectangle * - Verify that the framebuffer is black with a 100x200 purple rectangle at * (20, 10) */ cogl_set_viewport (20, /* x */ 10, /* y */ 100, /* width */ 200); /* height */ /* clear everything... */ cogl_clear (&black, COGL_BUFFER_BIT_COLOR); /* fill the viewport with purple.. */ cogl_set_source_color4ub (0xff, 0x00, 0xff, 0xff); cogl_rectangle (-1, 1, 1, -1); assert_rectangle_color_and_black_border (20, 10, 100, 200, 0xff, 0x00, 0xff); /* - Create a viewport twice the size of the onscreen framebuffer with * a negative offset positioning it at (-20, -10) relative to the * buffer itself. * - Draw a 100x200 green rectangle at (40, 20) within the viewport (which * is (20, 10) within the framebuffer) * - Verify that the framebuffer is black with a 100x200 green rectangle at * (20, 10) */ cogl_set_viewport (-20, /* x */ -10, /* y */ FRAMEBUFFER_WIDTH * 2, /* width */ FRAMEBUFFER_HEIGHT * 2); /* height */ /* clear everything... */ cogl_clear (&black, COGL_BUFFER_BIT_COLOR); /* draw a 100x200 green rectangle offset into the viewport such that its * top left corner should be found at (20, 10) in the offscreen buffer */ /* (offset 40 pixels right from the left of the viewport) */ x0 = -1.0f + (1.0f / FRAMEBUFFER_WIDTH) * 40.f; /* (offset 20 pixels down from the top of the viewport) */ y0 = 1.0f - (1.0f / FRAMEBUFFER_HEIGHT) * 20.0f; width = (1.0f / FRAMEBUFFER_WIDTH) * 100; height = (1.0f / FRAMEBUFFER_HEIGHT) * 200; cogl_set_source_color4ub (0x00, 0xff, 0x00, 0xff); cogl_rectangle (x0, y0, x0 + width, y0 - height); assert_rectangle_color_and_black_border (20, 10, 100, 200, 0x00, 0xff, 0x00); /* - Create a 200x400 viewport and position it a (20, 10) inside the draw * buffer. * - Push a 100x200 window space clip rectangle at (20, 10) * - Fill the whole viewport with a blue rectangle * - Verify that the framebuffer is black with a 100x200 blue rectangle at * (20, 10) */ cogl_set_viewport (20, /* x */ 10, /* y */ 200, /* width */ 400); /* height */ /* clear everything... */ cogl_clear (&black, COGL_BUFFER_BIT_COLOR); cogl_clip_push_window_rectangle (20, 10, 100, 200); /* fill the viewport with blue.. */ cogl_set_source_color4ub (0x00, 0x00, 0xff, 0xff); cogl_rectangle (-1, 1, 1, -1); cogl_clip_pop (); assert_rectangle_color_and_black_border (20, 10, 100, 200, 0x00, 0x00, 0xff); /* - Create a 200x400 viewport and position it a (20, 10) inside the draw * buffer. * - Push a 100x200 model space clip rectangle at (20, 10) in the viewport * (i.e. (40, 20) inside the framebuffer) * - Fill the whole viewport with a green rectangle * - Verify that the framebuffer is black with a 100x200 green rectangle at * (40, 20) */ cogl_set_viewport (20, /* x */ 10, /* y */ 200, /* width */ 400); /* height */ /* clear everything... */ cogl_clear (&black, COGL_BUFFER_BIT_COLOR); /* figure out where to position our clip rectangle in model space * coordinates... */ /* (offset 40 pixels right from the left of the viewport) */ x0 = -1.0f + (2.0f / 200) * 20.f; /* (offset 20 pixels down from the top of the viewport) */ y0 = 1.0f - (2.0f / 400) * 10.0f; width = (2.0f / 200) * 100; height = (2.0f / 400) * 200; /* add the clip rectangle... */ cogl_push_matrix (); cogl_translate (x0 + (width/2.0), y0 - (height/2.0), 0); /* XXX: Rotate just enough to stop Cogl from converting our model space * rectangle into a window space rectangle.. */ cogl_rotate (0.1, 0, 0, 1); cogl_clip_push_rectangle (-(width/2.0), -(height/2.0), width/2.0, height/2.0); cogl_pop_matrix (); /* fill the viewport with green.. */ cogl_set_source_color4ub (0x00, 0xff, 0x00, 0xff); cogl_rectangle (-1, 1, 1, -1); cogl_clip_pop (); assert_rectangle_color_and_black_border (40, 20, 100, 200, 0x00, 0xff, 0x00); /* Set the viewport to something specific so we can verify that it gets * restored after we are done testing with an offscreen framebuffer... */ cogl_set_viewport (20, 10, 100, 200); /* * Next test offscreen drawing... */ data = g_malloc (FRAMEBUFFER_WIDTH * 4 * FRAMEBUFFER_HEIGHT); tex = cogl_texture_new_from_data (FRAMEBUFFER_WIDTH, FRAMEBUFFER_HEIGHT, COGL_TEXTURE_NO_SLICING, COGL_PIXEL_FORMAT_RGBA_8888, /* data fmt */ COGL_PIXEL_FORMAT_ANY, /* internal fmt */ FRAMEBUFFER_WIDTH * 4, /* rowstride */ data); g_free (data); offscreen = cogl_offscreen_new_to_texture (tex); cogl_push_framebuffer (offscreen); /* - Create a 100x200 viewport (i.e. smaller than the offscreen framebuffer) * and position it a (20, 10) inside the framebuffer. * - Fill the whole viewport with a blue rectangle * - Verify that the framebuffer is black with a 100x200 blue rectangle at * (20, 10) */ cogl_set_viewport (20, /* x */ 10, /* y */ 100, /* width */ 200); /* height */ /* clear everything... */ cogl_clear (&black, COGL_BUFFER_BIT_COLOR); /* fill the viewport with blue.. */ cogl_set_source_color4ub (0x00, 0x00, 0xff, 0xff); cogl_rectangle (-1, 1, 1, -1); assert_rectangle_color_and_black_border (20, 10, 100, 200, 0x00, 0x00, 0xff); /* - Create a viewport twice the size of the offscreen framebuffer with * a negative offset positioning it at (-20, -10) relative to the * buffer itself. * - Draw a 100x200 red rectangle at (40, 20) within the viewport (which * is (20, 10) within the framebuffer) * - Verify that the framebuffer is black with a 100x200 red rectangle at * (20, 10) */ cogl_set_viewport (-20, /* x */ -10, /* y */ FRAMEBUFFER_WIDTH * 2, /* width */ FRAMEBUFFER_HEIGHT * 2); /* height */ /* clear everything... */ cogl_clear (&black, COGL_BUFFER_BIT_COLOR); /* draw a 100x200 red rectangle offset into the viewport such that its * top left corner should be found at (20, 10) in the offscreen buffer */ /* (offset 40 pixels right from the left of the viewport) */ x0 = -1.0f + (1.0f / FRAMEBUFFER_WIDTH) * 40.f; /* (offset 20 pixels down from the top of the viewport) */ y0 = 1.0f - (1.0f / FRAMEBUFFER_HEIGHT) * 20.0f; width = (1.0f / FRAMEBUFFER_WIDTH) * 100; height = (1.0f / FRAMEBUFFER_HEIGHT) * 200; cogl_set_source_color4ub (0xff, 0x00, 0x00, 0xff); cogl_rectangle (x0, y0, x0 + width, y0 - height); assert_rectangle_color_and_black_border (20, 10, 100, 200, 0xff, 0x00, 0x00); /* - Create a 200x400 viewport and position it a (20, 10) inside the draw * buffer. * - Push a 100x200 window space clip rectangle at (20, 10) * - Fill the whole viewport with a blue rectangle * - Verify that the framebuffer is black with a 100x200 blue rectangle at * (20, 10) */ cogl_set_viewport (20, /* x */ 10, /* y */ 200, /* width */ 400); /* height */ /* clear everything... */ cogl_clear (&black, COGL_BUFFER_BIT_COLOR); cogl_clip_push_window_rectangle (20, 10, 100, 200); /* fill the viewport with blue.. */ cogl_set_source_color4ub (0x00, 0x00, 0xff, 0xff); cogl_rectangle (-1, 1, 1, -1); cogl_clip_pop (); assert_rectangle_color_and_black_border (20, 10, 100, 200, 0x00, 0x00, 0xff); /* - Create a 200x400 viewport and position it a (20, 10) inside the draw * buffer. * - Push a 100x200 model space clip rectangle at (20, 10) in the viewport * (i.e. (40, 20) inside the framebuffer) * - Fill the whole viewport with a green rectangle * - Verify that the framebuffer is black with a 100x200 green rectangle at * (40, 20) */ cogl_set_viewport (20, /* x */ 10, /* y */ 200, /* width */ 400); /* height */ /* clear everything... */ cogl_clear (&black, COGL_BUFFER_BIT_COLOR); /* figure out where to position our clip rectangle in model space * coordinates... */ /* (offset 40 pixels right from the left of the viewport) */ x0 = -1.0f + (2.0f / 200) * 20.f; /* (offset 20 pixels down from the top of the viewport) */ y0 = 1.0f - (2.0f / 400) * 10.0f; width = (2.0f / 200) * 100; height = (2.0f / 400) * 200; /* add the clip rectangle... */ cogl_push_matrix (); cogl_translate (x0 + (width/2.0), y0 - (height/2.0), 0); /* XXX: Rotate just enough to stop Cogl from converting our model space * rectangle into a window space rectangle.. */ cogl_rotate (0.1, 0, 0, 1); cogl_clip_push_rectangle (-(width/2.0), -(height/2.0), width/2, height/2); cogl_pop_matrix (); /* fill the viewport with green.. */ cogl_set_source_color4ub (0x00, 0xff, 0x00, 0xff); cogl_rectangle (-1, 1, 1, -1); cogl_clip_pop (); assert_rectangle_color_and_black_border (40, 20, 100, 200, 0x00, 0xff, 0x00); /* Set the viewport to something obscure to verify that it gets * replace when we switch back to the onscreen framebuffer... */ cogl_set_viewport (0, 0, 10, 10); cogl_pop_framebuffer (); cogl_handle_unref (offscreen); /* * Verify that the previous onscreen framebuffer's viewport was restored * by drawing a white rectangle across the whole viewport. This should * draw a 100x200 rectangle at (20,10) relative to the onscreen draw * buffer... */ cogl_clear (&black, COGL_BUFFER_BIT_COLOR); cogl_set_source_color4ub (0xff, 0xff, 0xff, 0xff); cogl_rectangle (-1, 1, 1, -1); assert_rectangle_color_and_black_border (20, 10, 100, 200, 0xff, 0xff, 0xff); /* Uncomment to display the last contents of the offscreen framebuffer */ #if 1 cogl_matrix_init_identity (&projection); cogl_matrix_init_identity (&modelview); cogl_set_viewport (0, 0, FRAMEBUFFER_WIDTH, FRAMEBUFFER_HEIGHT); cogl_set_projection_matrix (&projection); cogl_set_modelview_matrix (&modelview); cogl_set_source_texture (tex); cogl_rectangle (-1, 1, 1, -1); #endif cogl_handle_unref (tex); /* Finally restore the stage's original state... */ cogl_pop_matrix (); cogl_set_projection_matrix (&saved_projection); cogl_set_viewport (saved_viewport[0], saved_viewport[1], saved_viewport[2], saved_viewport[3]); /* Comment this out if you want visual feedback of what this test * paints. */ clutter_main_quit (); }