void command_pasv(char *foo)
{
int a1, a2, a3, a4;
socklen_t namelen;
struct sockaddr_in localsock;
if (epsvall) {
control_printf(SL_FAILURE, "500 EPSV ALL has been called.");
return;
}
pasvsock = socket(AF_INET, SOCK_STREAM, 0);
sa.sin_addr.s_addr = INADDR_ANY;
sa.sin_family = AF_INET;
if (!config_getoption("PASSIVE_PORTS") || !strlen(config_getoption("PASSIVE_PORTS"))) {
/* bind to any port */
sa.sin_port = 0;
if (bind(pasvsock, (struct sockaddr *) &sa, sizeof(sa)) == -1) {
control_printf(SL_FAILURE, "425-Error: Unable to bind data socket.\r\n425 %s", strerror(errno));
return;
}
} else {
int i = 0, success = 0, port;
for (;;) {
port = int_from_list(config_getoption("PASSIVE_PORTS"), i++);
if (port < 0)
break;
sa.sin_port = htons(port);
if (bind(pasvsock, (struct sockaddr *) &sa, sizeof(sa)) == 0) {
success = 1;
#ifdef DEBUG
// bftpd_log("Passive mode: Successfully bound port %d\n", port);
#endif
break;
}
}
if (!success) {
control_printf(SL_FAILURE, "425 Error: Unable to bind data socket.");
return;
}
prepare_sock(pasvsock);
}
if (listen(pasvsock, 1)) {
control_printf(SL_FAILURE, "425-Error: Unable to make socket listen.\r\n425 %s",
strerror(errno));
return;
}
namelen = sizeof(localsock);
getsockname(pasvsock, (struct sockaddr *) &localsock, (int *) &namelen);
sscanf((char *) inet_ntoa(name.sin_addr), "%i.%i.%i.%i",
&a1, &a2, &a3, &a4);
control_printf(SL_SUCCESS, "227 Entering Passive Mode (%i,%i,%i,%i,%i,%i)", a1, a2, a3, a4,
ntohs(localsock.sin_port) >> 8, ntohs(localsock.sin_port) & 0xFF);
pasv = 1;
}
int dataconn()
{
struct sockaddr foo;
struct sockaddr_in local;
size_t namelen = sizeof(foo);
// brcm int curuid = geteuid();
memset(&foo, 0, sizeof(foo));
memset(&local, 0, sizeof(local));
if (pasv) {
sock = accept(pasvsock, (struct sockaddr *) &foo, &namelen);
if (sock == -1) {
control_printf(SL_FAILURE, "425-Unable to accept data connection.\r\n425 %s.",
strerror(errno));
return 1;
}
close(pasvsock);
prepare_sock(sock);
} else {
sock = socket(AF_INET, SOCK_STREAM, 0);
prepare_sock(sock);
local.sin_addr.s_addr = name.sin_addr.s_addr;
local.sin_family = AF_INET;
#if 0 //brcm
if (!strcasecmp(config_getoption("DATAPORT20"), "yes")) {
seteuid(0);
local.sin_port = htons(20);
}
#endif //brcm
if (bind(sock, (struct sockaddr *) &local, sizeof(local)) < 0) {
control_printf(SL_FAILURE, "425-Unable to bind data socket.\r\n425 %s.",
strerror(errno));
return 1;
}
#if 0 //brcm
if (!strcasecmp(config_getoption("DATAPORT20"), "yes"))
seteuid(curuid);
#endif //brcm
sa.sin_family = AF_INET;
if (connect(sock, (struct sockaddr *) &sa, sizeof(sa)) == -1) {
control_printf(SL_FAILURE, "425-Unable to establish data connection.\r\n"
"425 %s.", strerror(errno));
return 1;
}
}
control_printf(SL_SUCCESS, "150 %s data connection established.",
xfertype == TYPE_BINARY ? "BINARY" : "ASCII");
return 0;
}
int checkpass(char *password)
{
if (!getpwnam(user))
return 1;
#if 0 //brcm
if (!strcasecmp(config_getoption("ANONYMOUS_USER"), "yes"))
return 0;
#endif //brcm
#ifdef WANT_PAM
if (!strcasecmp(config_getoption("AUTH"), "pam"))
return checkpass_pam(password);
else
#endif
return checkpass_pwd(password);
}
void bftpdutmp_init()
{
#ifdef TC_REMOVE
char *filename = strdup(config_getoption("PATH_BFTPDUTMP"));
if (! filename)
return;
if ((!strcasecmp(filename, "none")) || (!filename[0]))
return;
/* First we have to create the file if it doesn't exist */
bftpdutmp = fopen(filename, "a");
if (bftpdutmp)
fclose(bftpdutmp);
/* Then we can open it for reading and writing */
if (!(bftpdutmp = fopen(filename, "r+"))) {
bftpd_log("Could not open log file %s.", filename);
control_printf(SL_FAILURE, "421-Could not open file %s\r\n"
"421 Server disabled for security reasons.", filename);
exit(1);
}
rewind(bftpdutmp);
// clean up memory
free(filename);
#endif
}
int checkshell()
{
#ifdef HAVE_GETUSERSHELL
char *cp;
struct passwd *pwd;
#if 0 //brcm
if (!strcasecmp(config_getoption("AUTH_ETCSHELLS"), "no"))
return 0;
#endif //brcm
pwd = getpwnam(user);
while ((cp = getusershell()))
if (!strcmp(cp, pwd->pw_shell))
break;
endusershell();
if (!cp)
return 1;
else
return 0;
#else
return 0;
# warning "Your system doesn't have getusershell(). You can not"
# warning "use /etc/shells authentication with bftpd."
#endif
}
void command_adminlogin(char *params)
{
char adminpass[31];
char rootpass[31];
char buffer[256];
char *realadminpass = config_getoption("ADMIN_PASS");
if (sscanf(params, "%30s %30s", adminpass, rootpass) < 2)
loginfailed();
if (!realadminpass[0])
loginfailed();
if (strcmp(crypt(adminpass, realadminpass), realadminpass))
loginfailed();
/* Admin password is right */
strcpy(user, "root");
init_userinfo();
if (checkpass(rootpass))
loginfailed();
/* Root password is right as well */
signal(SIGALRM, SIG_IGN);
control_printf(SL_SUCCESS, "230 Administrative login successful.");
bftpd_log("Administrative login SUCCESSFUL\n");
while (fgets(buffer, sizeof(buffer), stdin)) {
admin_parsecmd(buffer);
}
exit(0);
}
void wtmp_init()
{
if (strcasecmp(config_getoption("LOG_WTMP"), "no")) {
if (!((wtmp = fopen(_PATH_WTMP, "a"))))
bftpd_log("Warning: Unable to open %s.\n", _PATH_WTMP);
}
}
void new_umask()
{
int um;
char *foo = config_getoption("UMASK");
if (!foo[0])
um = 022;
else
um = strtoul(foo, NULL, 8);
umask(um);
}
int bftpd_setuid(uid_t uid)
{
#if 0 //brcm
/* If we must open the data connections from port 20,
* we have to keep the possibility to regain root privileges */
if (!strcasecmp(config_getoption("DATAPORT20"), "yes"))
return seteuid(uid);
else
#endif //brcm
return setuid(uid);
}
void login_init()
{
char *foo = config_getoption("INITIAL_CHROOT");
#ifdef HAVE_UTMP_H
wtmp_init();
#endif
if (foo[0]) { /* Initial chroot */
if (chroot(foo) == -1) {
control_printf(SL_FAILURE, "421 Initial chroot to '%s' failed.\r\n%s.",
foo, strerror(errno));
exit(1);
}
}
}
void command_user(char *username)
{
//printf("In command_user username=%s\n", username); // brcm
// brcm char *alias;
if (state) {
control_printf(SL_FAILURE, "503 Username already given.");
return;
}
mystrncpy(user, username, sizeof(user) - 1);
userinfo_set = 1; /* Dirty! */
#if 0 // brcm
alias = (char *) config_getoption("ALIAS");
userinfo_set = 0;
if (alias[0] != '\0')
mystrncpy(user, alias, sizeof(user) - 1);
#endif //brcm
init_userinfo();
#ifdef DEBUG
// bftpd_log("Trying to log in as %s.\n", user);
#endif
#if 0 //brcm
expand_groups();
if (!strcasecmp(config_getoption("ANONYMOUS_USER"), "yes"))
bftpd_login("");
else {
state = STATE_USER;
control_printf(SL_SUCCESS, "331 Password please.");
}
#endif //brcm
state = STATE_USER; //brcm
control_printf(SL_SUCCESS, "331 Password please."); //brcm
//printf("Done command_user username=%s\n", username); // brcm
}
void hidegroups_init()
{
char *foo = strdup(config_getoption("HIDE_GROUP"));
char *foo_save = foo;
char *bar;
struct group *tmpgrp;
while ((bar = strtok(foo, ","))) {
foo = NULL; /* strtok requirement */
if ((strcmp(bar, "0")) && (!strtoul(bar, NULL, 10))) {
/* bar is not numeric */
if ((tmpgrp = getgrnam(bar)))
add_to_hidegroups(tmpgrp->gr_gid);
} else
if (strtoul(bar, NULL, 10))
add_to_hidegroups(strtoul(bar, NULL, 10));
}
free(foo_save);
}
void log_init()
{
char *foo = config_getoption("LOGFILE");
#ifdef HAVE_SYSLOG_H
if (!strcasecmp(foo, "syslog")) {
log_syslog = 1;
openlog(global_argv[0], LOG_PID, LOG_DAEMON);
} else
#endif
if (foo[0])
if (!(logfile = fopen(foo, "a"))) {
control_printf(SL_FAILURE, "421-Could not open log file.\r\n"
"421 Server disabled for security reasons.");
exit(1);
}
statuslog = fopen(PATH_STATUSLOG, "a");
/* This one is for the admin code. */
statuslogforreading = fopen(PATH_STATUSLOG, "r");
}
/*
* This function opens the log file which keeps track of the amount
* of data sent or received.
*/
int Open_Send_Receive_Log()
{
char *foldername, *filename, *my_date;
foldername = config_getoption("BANDWIDTH");
if (! foldername[0])
return 1;
my_date = Current_Date();
filename = (char *) calloc( strlen(foldername) + strlen(my_date) + 16, sizeof(char) );
if (! filename)
return 0;
sprintf(filename, "%s/%s.txt", foldername, my_date);
send_receive_file = fopen(filename, "a");
free(filename);
if (! send_receive_file)
return 0;
else
return 1;
}
void command_port(char *params) {
unsigned long a0, a1, a2, a3, p0, p1, addr;
if (epsvall) {
control_printf(SL_FAILURE, "500 EPSV ALL has been called.");
return;
}
sscanf(params, "%lu,%lu,%lu,%lu,%lu,%lu", &a0, &a1, &a2, &a3, &p0, &p1);
addr = htonl((a0 << 24) + (a1 << 16) + (a2 << 8) + a3);
#if 0 //brcm
if((addr != remotename.sin_addr.s_addr) &&( strncasecmp(config_getoption("ALLOW_FXP"), "yes", 3))) {
control_printf(SL_FAILURE, "500 The given address is not yours.");
return;
}
#endif //brcm
sa.sin_addr.s_addr = addr;
sa.sin_port = htons((p0 << 8) + p1);
if (pasv) {
close(sock);
pasv = 0;
}
control_printf(SL_SUCCESS, "200 PORT %lu.%lu.%lu.%lu:%lu OK",
a0, a1, a2, a3, (p0 << 8) + p1);
}
int checkuser()
{
#if 0 //brcm
FILE *fd;
char *p;
char line[256];
if ((fd = fopen(config_getoption("PATH_FTPUSERS"), "r"))) {
while (fgets(line, sizeof(line), fd))
if ((p = strchr(line, '\n'))) {
*p = '\0';
if (line[0] == '#')
continue;
if (!strcasecmp(line, user)) {
fclose(fd);
return 1;
}
}
fclose(fd);
}
#endif //brcm
return 0;
}
void command_eprt(char *params) {
char delim;
int af;
char addr[51];
char foo[20];
int port;
if (epsvall) {
control_printf(SL_FAILURE, "500 EPSV ALL has been called.");
return;
}
if (strlen(params) < 5) {
control_printf(SL_FAILURE, "500 Syntax error.");
return;
}
delim = params[0];
sprintf(foo, "%c%%i%c%%50[^%c]%c%%i%c", delim, delim, delim, delim, delim);
if (sscanf(params, foo, &af, addr, &port) < 3) {
control_printf(SL_FAILURE, "500 Syntax error.");
return;
}
if (af != 1) {
control_printf(SL_FAILURE, "522 Protocol unsupported, use (1)");
return;
}
sa.sin_addr.s_addr = inet_addr(addr);
if ((sa.sin_addr.s_addr != remotename.sin_addr.s_addr) && (strncasecmp(config_getoption("ALLOW_FXP"), "yes", 3))) {
control_printf(SL_FAILURE, "500 The given address is not yours.");
return;
}
sa.sin_port = htons(port);
if (pasv) {
close(sock);
pasv = 0;
}
control_printf(SL_FAILURE, "200 EPRT %s:%i OK", addr, port);
}
void dirlist(char *name, FILE * client, char verbose,int bshow_hiden_files)
{
DIR *directory;
FILE *can_see_file;
int show_nonreadable_files = FALSE;
char *local_cwd = NULL;
int i;
int show_hidden_files = FALSE;
glob_t globbuf;
// 0.不支持配置文件配置，直接设置成显示所有文件包括隐藏文件
#if 0
if (! strcasecmp( config_getoption("SHOW_HIDDEN_FILES"), "yes") )
#endif
show_hidden_files = bshow_hiden_files;
if (! strcasecmp( config_getoption("SHOW_NONREADABLE_FILES"), "yes") )
show_nonreadable_files = TRUE;
if ((strstr(name, "/.")) && strchr(name, '*'))
return; /* DoS protection */
if ((directory = opendir(name)))
{
closedir(directory);
local_cwd = bftpd_cwd_getcwd();
chdir(name);
glob("*", 0, NULL, &globbuf);
if (show_hidden_files)
glob(".*", GLOB_APPEND, NULL, &globbuf);
}
else
{
if ( (name[0] == '*') && (show_hidden_files) )
{
glob(name, 0, NULL, &globbuf);
glob(".*", GLOB_APPEND, NULL, &globbuf);
}
else
glob(name, 0, NULL, &globbuf);
}
for (i = 0; i < globbuf.gl_pathc; i++)
{
if (! show_nonreadable_files)
{
if ( (can_see_file = fopen(globbuf.gl_pathv[i], "r") ) == NULL)
continue;
else
fclose(can_see_file);
}
dirlist_one_file(globbuf.gl_pathv[i], client, verbose);
}
globfree(&globbuf);
if (local_cwd) {
chdir(local_cwd);
free(local_cwd);
}
}
int bftpd_login(char *password)
{
#if 0 // brcm
char str[256];
char *foo;
int maxusers;
#endif //brcm
//printf("In bftpd_login password=%s, user=%s\n", password, user); // brcm
if (!getpwnam(user)) {
control_printf(SL_FAILURE, "421 Login incorrect.");
return 1;
}
// brcm add local/remote login check
if ((glbAccessMode == CLI_ACCESS_LOCAL && (strcmp(user, "user") && strcmp(user, "root"))) ||
(glbAccessMode == CLI_ACCESS_REMOTE && strcmp(user, "support")))
{
control_printf(SL_FAILURE, "421 Login incorrect.");
return 1;
}
#if 0 //brcm
if (strncasecmp(foo = config_getoption("DENY_LOGIN"), "no", 2)) {
if (foo[0] != '\0') {
if (strncasecmp(foo, "yes", 3))
control_printf(SL_FAILURE, "421-Server disabled.\r\n421 Reason: %s", foo);
else
control_printf(SL_FAILURE, "421 Login incorrect.");
bftpd_log("Login as user '%s' failed: Server disabled.\n", user);
exit(0);
}
}
maxusers = strtoul(config_getoption("USERLIMIT_GLOBAL"), NULL, 10);
if ((maxusers) && (maxusers == bftpdutmp_usercount("*"))) {
control_printf(SL_FAILURE, "421 There are already %i users logged in.", maxusers);
exit(0);
}
maxusers = strtoul(config_getoption("USERLIMIT_SINGLEUSER"), NULL, 10);
if ((maxusers) && (maxusers == bftpdutmp_usercount(user))) {
control_printf(SL_FAILURE, "421 User %s is already logged in %i times.", user, maxusers);
exit(0);
}
#endif //brcm
if(checkuser() || checkshell()) {
control_printf(SL_FAILURE, "421 Login incorrect.");
exit(0);
}
if (checkpass(password))
return 1;
#if 0 //brcm
if (strcasecmp((char *) config_getoption("RATIO"), "none")) {
sscanf((char *) config_getoption("RATIO"), "%i/%i",
&ratio_send, &ratio_recv);
}
strcpy(str, config_getoption("ROOTDIR"));
if (!str[0])
strcpy(str, "%h");
replace(str, "%u", userinfo.pw_name);
replace(str, "%h", userinfo.pw_dir);
if (!strcasecmp(config_getoption("RESOLVE_UIDS"), "yes")) {
passwdfile = fopen("/etc/passwd", "r");
groupfile = fopen("/etc/group", "r");
}
#endif //brcm
setgid(userinfo.pw_gid);
initgroups(userinfo.pw_name, userinfo.pw_gid);
#if 0 //brcm
if (strcasecmp(config_getoption("DO_CHROOT"), "no")) {
if (chroot(str)) {
control_printf(SL_FAILURE, "421 Unable to change root directory.\r\n%s.",
strerror(errno));
exit(0);
}
if (bftpd_setuid(userinfo.pw_uid)) {
control_printf(SL_FAILURE, "421 Unable to change uid.");
exit(0);
}
if (chdir("/")) {
control_printf(SL_FAILURE, "421 Unable to change working directory.\r\n%s.",
strerror(errno));
exit(0);
}
} else {
if (bftpd_setuid(userinfo.pw_uid)) {
control_printf(SL_FAILURE, "421 Unable to change uid.");
exit(0);
}
if (chdir(str)) {
control_printf(SL_FAILURE, "230 Couldn't change cwd to '%s': %s.", str,
strerror(errno));
chdir("/");
}
}
new_umask();
print_file(230, config_getoption("MOTD_USER"));
#endif //brcm
control_printf(SL_SUCCESS, "230 User logged in.");
#ifdef HAVE_UTMP_H
bftpd_logwtmp(1);
#endif
#if 0 //brcm
bftpdutmp_log(1);
bftpd_log("Successfully logged in as user '%s'.\n", user);
if (config_getoption("AUTO_CHDIR")[0])
chdir(config_getoption("AUTO_CHDIR"));
#endif //brcm
state = STATE_AUTHENTICATED;
//brcm bftpd_cwd_init();
return 0;
}
/*
This function opens the config file and
tries to reset some of the option values
in memory.
-- Jesse
*/
void Reread_Config_File()
{
char *line; // line in config file
char *config_value; // value stored in memory
char *new_value;
FILE *config_file;
int xfer_delay;
int section = 0; // where are we in the config file
unsigned long get_value;
// open config file
config_file = fopen(configpath, "r");
if (! config_file)
return;
/* read a line from the config file */
line = config_read_line(config_file);
while ( line )
{
if ( strchr(line, '{') )
section++;
/* look for reconized option name */
if ( strstr(line, "HELLO_STRING") )
config_value = config_getoption_reread("HELLO_STRING");
else if ( strstr(line, "QUIT_MSG") )
config_value = config_getoption_reread("QUIT_MSG");
else if ( strstr(line, "XFERBUFSIZE") )
config_value = config_getoption_reread("XFERBUFSIZE");
else if ( strstr(line, "DATA_TIMEOUT") )
config_value = config_getoption_reread("DATA_TIMEOUT");
else if ( strstr(line, "CONTROL_TIMEOUT") )
config_value = config_getoption_reread("CONTROL_TIMEOUT");
else if ( strstr(line, "USERLIMIT_GLOBAL") )
config_value = config_getoption_reread("USERLIMIT_GLOBAL");
else if ( strstr(line, "USERLIMIT_SINGLEUSER") )
config_value = config_getoption_reread("USERLIMIT_SINGLEUSER");
else if ( strstr(line, "USERLIMIT_HOST") )
config_value = config_getoption_reread("USERLIMIT_HOST");
else if ( strstr(line, "DENY_LOGIN") )
config_value = config_getoption_reread("DENY_LOGIN");
else if ( strstr(line, "XFER_DELAY") )
config_value = config_getoption_reread("XFER_DELAY");
else if ( strstr(line, "GZ_UPLOAD") )
config_value = config_getoption_reread("GZ_UPLOAD");
else
config_value = NULL;
/* get new value from input */
new_value = strchr(line, '"') ;
if (new_value)
{
char *temp;
new_value++; // go to first character after quote
temp = strchr(new_value, '"');
if (temp)
temp[0] = '\0'; // null terminal string
}
/* set value of option */
if ( (config_value) && (new_value) && (section == 1) )
{
// make sure it will fit.
if ( strlen(new_value) < 256)
strcpy(config_value, new_value);
}
line = config_read_line(config_file);
} /* while not end of file */
fclose(config_file);
/* reset numeric values */
get_value = strtoul( config_getoption("XFERBUFSIZE"), NULL, 0 );
if (get_value <= INT_MAX)
xfer_bufsize = get_value;
else
xfer_bufsize = XFER_BUFSIZE;
if (! xfer_bufsize )
xfer_bufsize = XFER_BUFSIZE;
control_timeout = atoi( config_getoption("CONTROL_TIMEOUT") );
if (! control_timeout)
control_timeout = CONTROL_TIMEOUT;
data_timeout = atoi( config_getoption("DATA_TIMEOUT") );
if (! data_timeout)
data_timeout = DATA_TIMEOUT;
xfer_delay = atoi( config_getoption("XFER_DELAY") );
}
