void noinline __attn(void)
{
/* To continue the probe will step over the ATTN instruction. The
* NOP is there to make sure there is something sane to "step
* over" to. */
console_start_sync();
asm volatile(".long 0x200;nop");
console_end_sync();
}
/* Bring up a remote CPU */
int __cpu_up(unsigned int cpu)
{
int rc;
printk("Bringing up CPU%d\n", cpu);
rc = init_secondary_pagetables(cpu);
if ( rc < 0 )
return rc;
console_start_sync(); /* Secondary may use early_printk */
/* Tell the remote CPU which stack to boot on. */
init_data.stack = idle_vcpu[cpu]->arch.stack;
/* Tell the remote CPU what is it's logical CPU ID */
init_data.cpuid = cpu;
/* Open the gate for this CPU */
smp_up_cpu = cpu_logical_map(cpu);
flush_xen_dcache(smp_up_cpu);
rc = arch_cpu_up(cpu);
console_end_sync();
if ( rc < 0 )
{
printk("Failed to bring up CPU%d\n", cpu);
return rc;
}
while ( !cpu_online(cpu) )
{
cpu_relax();
process_pending_softirqs();
}
return 0;
}
/* Main interface to do xen specific suspend/resume */
static int enter_state(u32 state)
{
unsigned long flags;
int error;
unsigned long cr4;
if ( (state <= ACPI_STATE_S0) || (state > ACPI_S_STATES_MAX) )
return -EINVAL;
if ( !spin_trylock(&pm_lock) )
return -EBUSY;
BUG_ON(system_state != SYS_STATE_active);
system_state = SYS_STATE_suspend;
printk(XENLOG_INFO "Preparing system for ACPI S%d state.\n", state);
freeze_domains();
acpi_dmar_reinstate();
if ( (error = disable_nonboot_cpus()) )
{
system_state = SYS_STATE_resume;
goto enable_cpu;
}
cpufreq_del_cpu(0);
hvm_cpu_down();
acpi_sleep_prepare(state);
console_start_sync();
printk("Entering ACPI S%d state.\n", state);
local_irq_save(flags);
spin_debug_disable();
if ( (error = device_power_down()) )
{
printk(XENLOG_ERR "Some devices failed to power down.");
system_state = SYS_STATE_resume;
goto done;
}
ACPI_FLUSH_CPU_CACHE();
switch ( state )
{
case ACPI_STATE_S3:
do_suspend_lowlevel();
system_reset_counter++;
error = tboot_s3_resume();
break;
case ACPI_STATE_S5:
acpi_enter_sleep_state(ACPI_STATE_S5);
break;
default:
error = -EINVAL;
break;
}
system_state = SYS_STATE_resume;
/* Restore CR4 and EFER from cached values. */
cr4 = read_cr4();
write_cr4(cr4 & ~X86_CR4_MCE);
write_efer(read_efer());
device_power_up();
mcheck_init(&boot_cpu_data, 0);
write_cr4(cr4);
printk(XENLOG_INFO "Finishing wakeup from ACPI S%d state.\n", state);
if ( (state == ACPI_STATE_S3) && error )
tboot_s3_error(error);
done:
spin_debug_enable();
local_irq_restore(flags);
console_end_sync();
acpi_sleep_post(state);
if ( hvm_cpu_up() )
BUG();
enable_cpu:
cpufreq_add_cpu(0);
microcode_resume_cpu(0);
rcu_barrier();
mtrr_aps_sync_begin();
enable_nonboot_cpus();
mtrr_aps_sync_end();
adjust_vtd_irq_affinities();
acpi_dmar_zap();
thaw_domains();
system_state = SYS_STATE_active;
spin_unlock(&pm_lock);
return error;
}
/* trap handler: main entry point */
int
__trap_to_gdb(struct cpu_user_regs *regs, unsigned long cookie)
{
int rc = 0;
unsigned long flags;
if ( gdb_ctx->serhnd < 0 )
{
printk("Debugging connection not set up.\n");
return -EBUSY;
}
/* We rely on our caller to ensure we're only on one processor
* at a time... We should probably panic here, but given that
* we're a debugger we should probably be a little tolerant of
* things going wrong. */
/* We don't want to use a spin lock here, because we're doing
two distinct things:
1 -- we don't want to run on more than one processor at a time,
and
2 -- we want to do something sensible if we re-enter ourselves.
Spin locks are good for 1, but useless for 2. */
if ( !atomic_dec_and_test(&gdb_ctx->running) )
{
printk("WARNING WARNING WARNING: Avoiding recursive gdb.\n");
atomic_inc(&gdb_ctx->running);
return -EBUSY;
}
if ( !gdb_ctx->connected )
{
printk("GDB connection activated.\n");
gdb_arch_print_state(regs);
gdb_ctx->connected = 1;
}
gdb_smp_pause();
local_irq_save(flags);
watchdog_disable();
console_start_sync();
/* Shouldn't really do this, but otherwise we stop for no
obvious reason, which is Bad */
printk("Waiting for GDB to attach...\n");
gdb_arch_enter(regs);
gdb_ctx->signum = gdb_arch_signal_num(regs, cookie);
/* If gdb is already attached, tell it we've stopped again. */
if ( gdb_ctx->currently_attached )
{
gdb_start_packet(gdb_ctx);
gdb_cmd_signum(gdb_ctx);
}
do {
if ( receive_command(gdb_ctx) < 0 )
{
dbg_printk("Error in GDB session...\n");
rc = -EIO;
break;
}
} while ( process_command(regs, gdb_ctx) == 0 );
gdb_smp_resume();
gdb_arch_exit(regs);
console_end_sync();
watchdog_enable();
atomic_inc(&gdb_ctx->running);
local_irq_restore(flags);
return rc;
}
/* Bring up a remote CPU */
int __cpu_up(unsigned int cpu)
{
int rc;
s_time_t deadline;
printk("Bringing up CPU%d\n", cpu);
rc = init_secondary_pagetables(cpu);
if ( rc < 0 )
return rc;
console_start_sync(); /* Secondary may use early_printk */
/* Tell the remote CPU which stack to boot on. */
init_data.stack = idle_vcpu[cpu]->arch.stack;
/* Tell the remote CPU what its logical CPU ID is. */
init_data.cpuid = cpu;
/* Open the gate for this CPU */
smp_up_cpu = cpu_logical_map(cpu);
clean_dcache(smp_up_cpu);
rc = arch_cpu_up(cpu);
console_end_sync();
if ( rc < 0 )
{
printk("Failed to bring up CPU%d\n", cpu);
return rc;
}
deadline = NOW() + MILLISECS(1000);
while ( !cpu_online(cpu) && NOW() < deadline )
{
cpu_relax();
process_pending_softirqs();
}
/*
* Nuke start of day info before checking one last time if the CPU
* actually came online. If it is not online it may still be
* trying to come up and may show up later unexpectedly.
*
* This doesn't completely avoid the possibility of the supposedly
* failed CPU trying to progress with another CPUs stack settings
* etc, but better than nothing, hopefully.
*/
init_data.stack = NULL;
init_data.cpuid = ~0;
smp_up_cpu = MPIDR_INVALID;
clean_dcache(smp_up_cpu);
if ( !cpu_online(cpu) )
{
printk("CPU%d never came online\n", cpu);
return -EIO;
}
return 0;
}
/* Main interface to do xen specific suspend/resume */
static int enter_state(u32 state)
{
unsigned long flags;
int error;
if ( (state <= ACPI_STATE_S0) || (state > ACPI_S_STATES_MAX) )
return -EINVAL;
if ( !spin_trylock(&pm_lock) )
return -EBUSY;
printk(XENLOG_INFO "Preparing system for ACPI S%d state.", state);
freeze_domains();
disable_nonboot_cpus();
if ( num_online_cpus() != 1 )
{
error = -EBUSY;
goto enable_cpu;
}
cpufreq_del_cpu(0);
hvm_cpu_down();
acpi_sleep_prepare(state);
console_start_sync();
printk("Entering ACPI S%d state.\n", state);
local_irq_save(flags);
spin_debug_disable();
if ( (error = device_power_down()) )
{
printk(XENLOG_ERR "Some devices failed to power down.");
goto done;
}
ACPI_FLUSH_CPU_CACHE();
switch ( state )
{
case ACPI_STATE_S3:
do_suspend_lowlevel();
system_reset_counter++;
error = tboot_s3_resume();
break;
case ACPI_STATE_S5:
acpi_enter_sleep_state(ACPI_STATE_S5);
break;
default:
error = -EINVAL;
break;
}
/* Restore CR4 and EFER from cached values. */
write_cr4(read_cr4());
if ( cpu_has_efer )
write_efer(read_efer());
device_power_up();
printk(XENLOG_INFO "Finishing wakeup from ACPI S%d state.\n", state);
if ( (state == ACPI_STATE_S3) && error )
panic("Memory integrity was lost on resume (%d)\n", error);
done:
spin_debug_enable();
local_irq_restore(flags);
console_end_sync();
acpi_sleep_post(state);
if ( !hvm_cpu_up() )
BUG();
enable_cpu:
cpufreq_add_cpu(0);
microcode_resume_cpu(0);
enable_nonboot_cpus();
thaw_domains();
spin_unlock(&pm_lock);
return error;
}
static void __init __start_xen(void)
{
memcpy(0, exception_vectors, exception_vectors_end - exception_vectors);
synchronize_caches(0, exception_vectors_end - exception_vectors);
ticks_per_usec = timebase_freq / 1000000ULL;
/* Parse the command-line options. */
cmdline_parse(xen_cmdline);
/* we need to be able to identify this CPU early on */
init_boot_cpu();
/* We initialise the serial devices very early so we can get debugging. */
ns16550.io_base = 0x3f8;
ns16550_init(0, &ns16550);
ns16550.io_base = 0x2f8;
ns16550_init(1, &ns16550);
serial_init_preirq();
init_console();
console_start_sync(); /* Stay synchronous for early debugging. */
rtas_init((void *)oftree);
memory_init();
printk("xen_cmdline: %016lx\n", (ulong)xen_cmdline);
printk("dom0_cmdline: %016lx\n", (ulong)dom0_cmdline);
printk("dom0_addr: %016lx\n", (ulong)dom0_addr);
printk("dom0_len: %016lx\n", (ulong)dom0_len);
printk("initrd_start: %016lx\n", (ulong)initrd_start);
printk("initrd_len: %016lx\n", (ulong)initrd_len);
printk("dom0: %016llx\n", *(unsigned long long *)dom0_addr);
#ifdef OF_DEBUG
key_ofdump(0);
#endif
percpu_init_areas();
init_parea(0);
cpu_initialize(0);
#ifdef CONFIG_GDB
initialise_gdb();
if (opt_earlygdb)
debugger_trap_immediate();
#endif
start_of_day();
acm_init(NULL, 0);
mpic_setup_this_cpu();
/* Deal with secondary processors. */
if (opt_nosmp || ofd_boot_cpu == -1) {
printk("nosmp: leaving secondary processors spinning forever\n");
} else {
printk("spinning up at most %d total processors ...\n", max_cpus);
kick_secondary_cpus(max_cpus);
}
/* This cannot be called before secondary cpus are marked online. */
percpu_free_unused_areas();
/* Create initial domain 0. */
dom0 = domain_create(0, 0, DOM0_SSIDREF);
if (dom0 == NULL)
panic("Error creating domain 0\n");
/* The Interrupt Controller will route everything to CPU 0 so we
* need to make sure Dom0's vVCPU 0 is pinned to the CPU */
dom0->vcpu[0]->cpu_affinity = cpumask_of_cpu(0);
dom0->is_privileged = 1;
/* scrub_heap_pages() requires IRQs enabled, and we're post IRQ setup... */
local_irq_enable();
/* Scrub RAM that is still free and so may go to an unprivileged domain. */
scrub_heap_pages();
if ((dom0_addr == 0) || (dom0_len == 0))
panic("No domain 0 found.\n");
if (construct_dom0(dom0, dom0_addr, dom0_len,
initrd_start, initrd_len,
dom0_cmdline) != 0) {
panic("Could not set up DOM0 guest OS\n");
}
init_xenheap_pages(ALIGN_UP(dom0_addr, PAGE_SIZE),
ALIGN_DOWN(dom0_addr + dom0_len, PAGE_SIZE));
if (initrd_start)
init_xenheap_pages(ALIGN_UP(initrd_start, PAGE_SIZE),
ALIGN_DOWN(initrd_start + initrd_len, PAGE_SIZE));
init_trace_bufs();
console_endboot();
/* Hide UART from DOM0 if we're using it */
serial_endboot();
console_end_sync();
domain_unpause_by_systemcontroller(dom0);
#ifdef DEBUG_IPI
ipi_torture_test();
#endif
startup_cpu_idle_loop();
}
