/*
* called on a cpu other than 0 from cpureset in l.s,
* from _vrst in lexception.s.
* mmu and l1 (and system-wide l2) caches and coherency (smpon) are on,
* but interrupts are disabled.
* our mmu is using an exact copy of cpu0's l1 page table
* as it was after userinit ran.
*/
void
cpustart(void)
{
int ms;
ulong *evp;
Power *pwr;
up = nil;
if (active.machs & (1<<m->machno)) {
serialputc('?');
serialputc('r');
panic("cpu%d: resetting after start", m->machno);
}
assert(m->machno != 0);
errata();
cortexa9cachecfg();
memdiag(&testmem);
machinit(); /* bumps nmach, adds bit to machs */
machoff(m->machno); /* not ready to go yet */
/* clock signals and scu are system-wide and already on */
clockshutdown(); /* kill any watch-dog timer */
trapinit();
clockinit(); /* sets loop delay */
timersinit();
cpuidprint();
/*
* notify cpu0 that we're up so it can proceed to l1diag.
*/
evp = (ulong *)soc.exceptvec; /* magic */
*evp = m->machno;
coherence();
l1diag(); /* contend with other cpus to verify sanity */
/*
* pwr->noiopwr == 0
* pwr->detect == 0x1ff (default, all disabled)
*/
pwr = (Power *)soc.power;
assert(pwr->gatests == MASK(7)); /* everything has power */
/*
* 8169 has to initialise before we get past this, thus cpu0
* has to schedule processes first.
*/
if (Debug)
iprint("cpu%d: waiting for 8169\n", m->machno);
for (ms = 0; !l1ptstable.word && ms < 5000; ms += 10) {
delay(10);
cachedinvse(&l1ptstable.word, sizeof l1ptstable.word);
}
if (!l1ptstable.word)
iprint("cpu%d: 8169 unreasonably slow; proceeding\n", m->machno);
/* now safe to copy cpu0's l1 pt in mmuinit */
mmuinit(); /* update our l1 pt from cpu0's */
fpon();
machon(m->machno); /* now ready to go and be scheduled */
if (Debug)
iprint("cpu%d: scheding\n", m->machno);
schedinit();
panic("cpu%d: schedinit returned", m->machno);
}
/*
* at entry, l.s has set m for cpu0 and printed "Plan 9 from Be"
* but has not zeroed bss.
*/
void
main(void)
{
int cpu;
static ulong vfy = 0xcafebabe;
up = nil;
if (vfy != 0xcafebabe) {
serialputc('?');
serialputc('d');
panic("data segment misaligned");
}
memset(edata, 0, end - edata);
/*
* we can't lock until smpon has run, but we're supposed to wait
* until l1 & l2 are on. too bad. l1 is on, l2 will soon be.
*/
smpon();
iprint("ll Labs ");
cacheinit();
/*
* data segment is aligned, bss is zeroed, caches' characteristics
* are known. begin initialisation.
*/
mach0init();
l2pageinit();
mmuinit();
optionsinit("/boot/boot boot");
quotefmtinstall();
/* want plan9.ini to be able to affect memory sizing in confinit */
plan9iniinit(); /* before we step on plan9.ini in low memory */
/* l2 looks for *l2off= in plan9.ini */
l2cache->on(); /* l2->on requires locks to work, thus smpon */
l2cache->info(&cachel[2]);
allcache->on();
cortexa9cachecfg();
trapinit(); /* so confinit can probe memory to size it */
confinit(); /* figures out amount of memory */
/* xinit prints (if it can), so finish up the banner here. */
delay(100);
navailcpus = getncpus();
iprint("(mp arm; %d cpus)\n\n", navailcpus);
delay(100);
for (cpu = 1; cpu < navailcpus; cpu++)
stopcpu(cpu);
xinit();
irqtooearly = 0; /* now that xinit and trapinit have run */
mainmem->flags |= POOL_ANTAGONISM /* | POOL_PARANOIA */ ;
/*
* Printinit will cause the first malloc call.
* (printinit->qopen->malloc) unless any of the
* above (like clockinit) do an irqenable, which
* will call malloc.
* If the system dies here it's probably due
* to malloc(->xalloc) not being initialised
* correctly, or the data segment is misaligned
* (it's amazing how far you can get with
* things like that completely broken).
*
* (Should be) boilerplate from here on.
*/
archreset(); /* cfg clock signals, print cache cfg */
clockinit(); /* start clocks */
timersinit();
delay(50); /* let uart catch up */
printinit();
kbdenable();
cpuidprint();
chkmissing();
procinit0();
initseg();
// dmainit();
links();
conf.monitor = 1;
// screeninit();
iprint("pcireset...");
pcireset(); /* this tends to hang after a reboot */
iprint("ok\n");
chandevreset(); /* most devices are discovered here */
// i8250console(); /* too early; see init0 */
pageinit(); /* prints "1020M memory: ⋯ */
swapinit();
userinit();
/*
* starting a cpu will eventually result in it calling schedinit,
* so everything necessary to run user processes should be set up
* before starting secondary cpus.
*/
launchinit();
/* SMP & FW are already on when we get here; u-boot set them? */
for (cpu = 1; cpu < navailcpus; cpu++)
if (startcpu(cpu) < 0)
panic("cpu%d didn't start", cpu);
l1diag();
schedinit();
panic("cpu%d: schedinit returned", m->machno);
}
