cpSpace *Slice::Init()
{
ChipmunkDemo::Init();
message = "Hold right bottom corner and slice with touch.";
space = cpSpaceNew();
cpSpaceSetIterations(space, 30);
cpSpaceSetGravity(space, cpv(0, -500));
cpSpaceSetSleepTimeThreshold(space, 0.5f);
cpSpaceSetCollisionSlop(space, 0.5f);
cpBody *body, *staticBody = cpSpaceGetStaticBody(space);
cpShape *shape;
// Create segments around the edge of the screen.
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-1000,-240), cpv(1000,-240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
cpFloat width = 200.0f;
cpFloat height = 300.0f;
cpFloat mass = width*height*DENSITY;
cpFloat moment = cpMomentForBox(mass, width, height);
body = cpSpaceAddBody(space, cpBodyNew(mass, moment));
shape = cpSpaceAddShape(space, cpBoxShapeNew(body, width, height, 0.0));
cpShapeSetFriction(shape, 0.6f);
return space;
}
MachineSystem::MachineSystem(int width, int height, int hPegs, int vPegs, cpVect position)
: parts(hPegs*vPegs),
attachments((hPegs*vPegs), std::vector<Attachment *>(hPegs*vPegs, NULL)),
space(cpSpaceNew()),
nMachines(0),
nAttachments(0)
{
cpSpaceSetIterations(space, 20);
gridSpacing = cpv((float)width/(hPegs + 1), (float)height/(vPegs + 1));
size = cpv(hPegs, vPegs);
body = cpBodyNewStatic();
cpBodySetPos(body, position);
cpShape *wallShape = cpSegmentShapeNew(body, cpv(-width/2, height/2), cpv(width/2, height/2), .5);
cpShapeSetLayers(wallShape, WALL_LAYER);
cpSpaceAddStaticShape(space, wallShape);
wallShape = cpSegmentShapeNew(body, cpv(-width/2, -height/2), cpv(+width/2, -height/2), 0.5);
cpShapeSetLayers(wallShape, WALL_LAYER);
cpSpaceAddStaticShape(space, wallShape);
wallShape = cpSegmentShapeNew(body, cpv(-width/2, +height/2), cpv(-width/2, -height/2), 0.5);
cpShapeSetLayers(wallShape, WALL_LAYER);
cpSpaceAddStaticShape(space, wallShape);
wallShape = cpSegmentShapeNew(body, cpv(+width/2, +height/2), cpv(+width/2, -height/2), 0.5);
cpShapeSetLayers(wallShape, WALL_LAYER);
cpSpaceAddStaticShape(space, wallShape);
inputMachinePosition = cpv(-1,-1);
outputMachinePosition = cpv(-1,-1);
}
static cpSpace *
init(void)
{
ChipmunkDemoMessageString = "Right click and drag to change the blocks's shape.";
cpSpace *space = cpSpaceNew();
cpSpaceSetIterations(space, 30);
cpSpaceSetGravity(space, cpv(0, -500));
cpSpaceSetSleepTimeThreshold(space, 0.5f);
cpSpaceSetCollisionSlop(space, 0.5f);
cpBody *body, *staticBody = cpSpaceGetStaticBody(space);
// Create segments around the edge of the screen.
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(320,-240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
cpFloat width = 50.0f;
cpFloat height = 70.0f;
cpFloat mass = width*height*DENSITY;
cpFloat moment = cpMomentForBox(mass, width, height);
body = cpSpaceAddBody(space, cpBodyNew(mass, moment));
shape = cpSpaceAddShape(space, cpBoxShapeNew(body, width, height));
cpShapeSetFriction(shape, 0.6f);
return space;
}
void GPlayState::Init()
{
srand(time(NULL));
stepSize = 1.0 / 60.0;
space = cpSpaceNew();
cpSpaceSetIterations(space, 6);
arena = Arena(space);
if(!player1)
player1 = new Fighter();
if(!player2)
player2 = new Fighter();
player1->Init(space, 250, 400, Character::RIGHT, sf::Color(32, 32, 200));
player2->Init(space, 1050, 400, Character::LEFT, sf::Color(200, 32, 32));
player1->setOponent(player2);
player2->setOponent(player1);
inputManager->addPlayer(player1);
inputManager->addPlayer(player2);
hud = HUD(player1, player2);
if(!font.loadFromFile("rec/RevoPop.ttf")) {
fprintf(stderr, "could not load font\n");
}
p1ScoreT.setFont(font);
p1ScoreT.setString("0");
p1ScoreT.setCharacterSize(32);
p1ScoreT.setColor(sf::Color(32, 32, 32));
p1ScoreT.setPosition(556, 344);
p2ScoreT.setFont(font);
p2ScoreT.setString("0");
p2ScoreT.setCharacterSize(32);
p2ScoreT.setColor(sf::Color(32, 32, 32));
p2ScoreT.setPosition(556, 344);
winner.setFont(font);
winner.setCharacterSize(32);
winner.setColor(sf::Color(32, 32, 32));
winner.setPosition(480, 344);
reseting = true;
resetTime.restart();
winner.setString("Beginning Round 1");
round = 1;
p1Score = 0;
p2Score = 0;
int ultPlayer = rand() % 2;
ultClock.restart();
printf("GPlayState Init\n");
}
static cpSpace *
init(void)
{
ChipmunkDemoMessageString = "One way platforms are trivial in Chipmunk using a very simple collision callback.";
cpSpace *space = cpSpaceNew();
cpSpaceSetIterations(space, 10);
cpSpaceSetGravity(space, cpv(0, -100));
cpBody *body, *staticBody = cpSpaceGetStaticBody(space);
cpShape *shape;
// Create segments around the edge of the screen.
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(-320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(320,-240), cpv(320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(320,-240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
// Add our one way segment
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-160,-100), cpv(160,-100), 10.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetCollisionType(shape, COLLISION_TYPE_ONE_WAY);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
// We'll use the data pointer for the OneWayPlatform struct
platformInstance.n = cpv(0, 1); // let objects pass upwards
cpShapeSetUserData(shape, &platformInstance);
// Add a ball to test it out
cpFloat radius = 15.0f;
body = cpSpaceAddBody(space, cpBodyNew(10.0f, cpMomentForCircle(10.0f, 0.0f, radius, cpvzero)));
cpBodySetPosition(body, cpv(0, -200));
cpBodySetVelocity(body, cpv(0, 170));
shape = cpSpaceAddShape(space, cpCircleShapeNew(body, radius, cpvzero));
cpShapeSetElasticity(shape, 0.0f);
cpShapeSetFriction(shape, 0.9f);
cpShapeSetCollisionType(shape, 2);
cpCollisionHandler *handler = cpSpaceAddWildcardHandler(space, COLLISION_TYPE_ONE_WAY);
handler->preSolveFunc = PreSolve;
return space;
}
int lc_space_newindex(lua_State *vm){
cpSpace *space = (lc_GetSpace(1, vm))->space;
const char *key = lua_tostring(vm, 2);
if (strcmp("gravity", key) == 0 && lua_istable(vm, 3)){
cpSpaceSetGravity(space, lc_TableTocpVect(3, vm));
}
else if (strcmp("iterations", key) == 0){
cpSpaceSetIterations(space, (cpFloat)lua_tonumber(vm, 3));
}
return 0;
}
static cpSpace *
init(void)
{
ChipmunkDemoMessageString = "Sticky collisions using the cpArbiter data pointer.";
cpSpace *space = cpSpaceNew();
cpSpaceSetIterations(space, 10);
cpSpaceSetGravity(space, cpv(0, -1000));
cpSpaceSetCollisionSlop(space, 2.0);
cpBody *staticBody = cpSpaceGetStaticBody(space);
cpShape *shape;
// Create segments around the edge of the screen.
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-340,-260), cpv(-340, 260), 20.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetCollisionType(shape, COLLIDE_STICK_SENSOR);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv( 340,-260), cpv( 340, 260), 20.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetCollisionType(shape, COLLIDE_STICK_SENSOR);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-340,-260), cpv( 340,-260), 20.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetCollisionType(shape, COLLIDE_STICK_SENSOR);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-340, 260), cpv( 340, 260), 20.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetCollisionType(shape, COLLIDE_STICK_SENSOR);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
for(int i=0; i<200; i++){
cpFloat mass = 0.15f;
cpFloat radius = 10.0f;
cpBody *body = cpSpaceAddBody(space, cpBodyNew(mass, cpMomentForCircle(mass, 0.0f, radius, cpvzero)));
cpBodySetPos(body, cpv(cpflerp(-150.0f, 150.0f, frand()), cpflerp(-150.0f, 150.0f, frand())));
cpShape *shape = cpSpaceAddShape(space, cpCircleShapeNew(body, radius + STICK_SENSOR_THICKNESS, cpvzero));
cpShapeSetFriction(shape, 0.9f);
cpShapeSetCollisionType(shape, COLLIDE_STICK_SENSOR);
}
cpSpaceAddCollisionHandler(space, COLLIDE_STICK_SENSOR, COLLIDE_STICK_SENSOR, NULL, StickyPreSolve, NULL, StickySeparate, NULL);
return space;
}
static cpSpace *
init(void)
{
ChipmunkDemoMessageString = "Right click to make pentagons static/dynamic.";
cpSpace *space = cpSpaceNew();
cpSpaceSetIterations(space, 5);
cpSpaceSetGravity(space, cpv(0, -100));
cpBody *body, *staticBody = cpSpaceGetStaticBody(space);
cpShape *shape;
// Vertexes for a triangle shape.
cpVect tris[] = {
cpv(-15,-15),
cpv( 0, 10),
cpv( 15,-15),
};
// Create the static triangles.
for(int i=0; i<9; i++){
for(int j=0; j<6; j++){
cpFloat stagger = (j%2)*40;
cpVect offset = cpv(i*80 - 320 + stagger, j*70 - 240);
shape = cpSpaceAddShape(space, cpPolyShapeNew(staticBody, 3, tris, offset));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
}
}
// Create vertexes for a pentagon shape.
cpVect verts[NUM_VERTS];
for(int i=0; i<NUM_VERTS; i++){
cpFloat angle = -2*M_PI*i/((cpFloat) NUM_VERTS);
verts[i] = cpv(10*cos(angle), 10*sin(angle));
}
pentagon_mass = 1.0;
pentagon_moment = cpMomentForPoly(1.0f, NUM_VERTS, verts, cpvzero);
// Add lots of pentagons.
for(int i=0; i<300; i++){
body = cpSpaceAddBody(space, cpBodyNew(pentagon_mass, pentagon_moment));
cpFloat x = rand()/(cpFloat)RAND_MAX*640 - 320;
cpBodySetPos(body, cpv(x, 350));
shape = cpSpaceAddShape(space, cpPolyShapeNew(body, NUM_VERTS, verts, cpvzero));
cpShapeSetElasticity(shape, 0.0f);
cpShapeSetFriction(shape, 0.4f);
}
return space;
}
static int l_physics_setSpaceIterations(lua_State* state)
{
l_tools_checkUserDataPlusErrMsg(state, 1, "You must provide a space");
l_physics_PhysicsData* physics = (l_physics_PhysicsData*)lua_touserdata(state, 1);
int iterations = l_tools_toIntegerOrError(state, 2);
cpSpaceSetIterations(physics->physics->space, iterations);
return 0;
}
void initDll(void)
{
Variable *mainStatic;
cpSpaceInit(&mSpace);
cpSpaceSetIterations(&mSpace,20);
cpSpaceSetEnableContactGraph(&mSpace,cpFalse);
//cpSpaceSetSleepTimeThreshold(&mSpace,0.1f);
vhInit(&mVariableHandler);
mainStatic = vhAddBody(&mVariableHandler,cpSpaceGetStaticBody(&mSpace));
mainStatic->mCBPtr = 0;
mWind = cpv(0,0);
mState = Loaded;
}
static cpSpace *
init(void)
{
QUERY_START = cpvzero;
space = cpSpaceNew();
cpSpaceSetIterations(space, 5);
{ // add a fat segment
cpFloat mass = 1.0f;
cpFloat length = 100.0f;
cpVect a = cpv(-length/2.0f, 0.0f), b = cpv(length/2.0f, 0.0f);
cpBody *body = cpSpaceAddBody(space, cpBodyNew(mass, cpMomentForSegment(mass, a, b)));
cpBodySetPos(body, cpv(0.0f, 100.0f));
cpSpaceAddShape(space, cpSegmentShapeNew(body, a, b, 20.0f));
}
{ // add a static segment
cpSpaceAddShape(space, cpSegmentShapeNew(cpSpaceGetStaticBody(space), cpv(0, 300), cpv(300, 0), 0.0f));
}
{ // add a pentagon
cpFloat mass = 1.0f;
const int NUM_VERTS = 5;
cpVect verts[NUM_VERTS];
for(int i=0; i<NUM_VERTS; i++){
cpFloat angle = -2*M_PI*i/((cpFloat) NUM_VERTS);
verts[i] = cpv(30*cos(angle), 30*sin(angle));
}
cpBody *body = cpSpaceAddBody(space, cpBodyNew(mass, cpMomentForPoly(mass, NUM_VERTS, verts, cpvzero)));
cpBodySetPos(body, cpv(50.0f, 50.0f));
cpSpaceAddShape(space, cpPolyShapeNew(body, NUM_VERTS, verts, cpvzero));
}
{ // add a circle
cpFloat mass = 1.0f;
cpFloat r = 20.0f;
cpBody *body = cpSpaceAddBody(space, cpBodyNew(mass, cpMomentForCircle(mass, 0.0f, r, cpvzero)));
cpBodySetPos(body, cpv(100.0f, 100.0f));
cpSpaceAddShape(space, cpCircleShapeNew(body, r, cpvzero));
}
return space;
}
static cpSpace *
init(void)
{
cpSpace *space = cpSpaceNew();
cpSpaceSetIterations(space, 30);
cpSpaceSetGravity(space, cpv(0, -100));
cpSpaceSetSleepTimeThreshold(space, 0.5f);
cpSpaceSetCollisionSlop(space, 0.5f);
cpBody *body, *staticBody = cpSpaceGetStaticBody(space);
cpShape *shape;
// Create segments around the edge of the screen.
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(-320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(320,-240), cpv(320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(320,-240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
// Add lots of boxes.
for(int i=0; i<14; i++){
for(int j=0; j<=i; j++){
body = cpSpaceAddBody(space, cpBodyNew(1.0f, cpMomentForBox(1.0f, 30.0f, 30.0f)));
cpBodySetPosition(body, cpv(j*32 - i*16, 300 - i*32));
shape = cpSpaceAddShape(space, cpBoxShapeNew(body, 30.0f, 30.0f, 0.5f));
cpShapeSetElasticity(shape, 0.0f);
cpShapeSetFriction(shape, 0.8f);
}
}
// Add a ball to make things more interesting
cpFloat radius = 15.0f;
body = cpSpaceAddBody(space, cpBodyNew(10.0f, cpMomentForCircle(10.0f, 0.0f, radius, cpvzero)));
cpBodySetPosition(body, cpv(0, -240 + radius+5));
shape = cpSpaceAddShape(space, cpCircleShapeNew(body, radius, cpvzero));
cpShapeSetElasticity(shape, 0.0f);
cpShapeSetFriction(shape, 0.9f);
return space;
}
Stage::Stage(int count, char** argv){
/*** Set up space variables ***/
envSpace = cpSpaceNew();
cpSpaceSetIterations(envSpace, 10);
cpSpaceSetGravity(envSpace, cpv(0, -1500));
PhysicsObject::space = envSpace;
// cpSpaceSetSleepTimeThreshold(envSpace, 5.0f);
/*** Set up projection and view matrices -- these numbers will probably change ***/
Obj::matProjection = glm::perspective(60.0f*3.1415f/180.0f, 1.0f, 10.0f, 18000.0f);
//mat_Projection = glm::ortho(-100.0f, 100.0f, -100.0f, 100.0f, 10.0f, 300.0f);
setCollisionHandlers(envSpace);
/** STAGE DESIGN GOES BELOW HERE **/
physicsObjects.push_back(new Platform(-1500, 1500, 1525));
physicsObjects.push_back(new Platform(-1450, 1450, -975));
physicsObjects.push_back(new Platform(150, 700, 25));
physicsObjects.push_back(new Platform(-1450, -400, 375));
physicsObjects.push_back(new Spikes(-1200, -25, 3.141592f));
physicsObjects.push_back(new Platform(-700, 1450, 825));
physicsObjects.push_back(new Wall(-200, 1500, -1475));
physicsObjects.push_back(new Ramp(1450, 4500, -975, 500));
physicsObjects.push_back(new Boulder(4200, 900));
physicsObjects.push_back(new Spears(-1750, -950));
physicsObjects.push_back(new Spikes(-800, -950));
physicsObjects.push_back(new Platform(-500, -200, -300));
boundary = new Boundary(-30000, 30000, -975, BS_SAND);
userControlObject = new Hero(-770, 800);
skybox = new Skybox(0, 0, 1);
/** STAGE DESIGN GOES ABOVE HERE **/
mat_View = glm::lookAt(glm::vec3(0.0f, 500.0f, 2000.0f), glm::vec3(-770.0f, 800.0f, 0.0f), glm::vec3(0.0f, 1.0f, 0.0f));
soundMap.insert(std::pair<std::string, Sound*>("Background", new Sound("./data/sound/bm.wav")));
soundMap.insert(std::pair<std::string, Sound*>("Jump", new Sound("./data/sound/jump.wav")));
soundMap.find("Background")->second->play(1); //play bgm
}
fff::kitty::kitty(){
body = cpBodyNew(1.f, INFINITY);
cpBodySetUserData(body, this);
forecastspace = cpSpaceNew();
cpSpaceSetIterations(forecastspace, 100);
cpBodyInit(&forecastbody, 1.f, INFINITY);
cpSpaceSetGravity(forecastspace, (cpVect){0.f, METERSTOPIXELS(10.f)} );
cpSpaceAddBody(forecastspace, &forecastbody);
iflames = 0;
burstinflames = false;
leftimpulse = false;
rightimpulse = false;
}
static cpSpace *
init(void)
{
// Create a rouge body to control the planet manually.
planetBody = cpBodyNew(INFINITY, INFINITY);
cpBodySetAngVel(planetBody, 0.2f);
cpSpace *space = cpSpaceNew();
cpSpaceSetIterations(space, 20);
for(int i=0; i<30; i++)
add_box(space);
cpShape *shape = cpSpaceAddShape(space, cpCircleShapeNew(planetBody, 70.0f, cpvzero));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
return space;
}
static cpSpace *
init(void)
{
// Create a rouge body to control the planet manually.
cpSpace *space = cpSpaceNew();
cpSpaceSetIterations(space, 20);
planetBody = cpSpaceAddBody(space, cpBodyNewKinematic());
cpBodySetAngularVelocity(planetBody, 0.2f);
for(int i=0; i<30; i++){
add_box(space);
}
cpShape *shape = cpSpaceAddShape(space, cpCircleShapeNew(planetBody, 70.0f, cpvzero));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
return space;
}
static cpSpace *
init(void)
{
cpSpace *space = cpSpaceNew();
cpSpaceSetIterations(space, 30);
cpSpaceSetGravity(space, cpv(0, -300));
cpSpaceSetSleepTimeThreshold(space, 0.5f);
cpSpaceSetCollisionSlop(space, 0.5f);
// Add a floor.
cpShape *shape = cpSpaceAddShape(space, cpSegmentShapeNew(cpSpaceGetStaticBody(space), cpv(-600,-240), cpv(600,-240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
// Add the dominoes.
int n = 12;
for(int i=0; i<n; i++){
for(int j=0; j<(n - i); j++){
cpVect offset = cpv((j - (n - 1 - i)*0.5f)*1.5f*HEIGHT, (i + 0.5f)*(HEIGHT + 2*WIDTH) - WIDTH - 240);
add_domino(space, offset, cpFalse);
add_domino(space, cpvadd(offset, cpv(0, (HEIGHT + WIDTH)/2.0f)), cpTrue);
if(j == 0){
add_domino(space, cpvadd(offset, cpv(0.5f*(WIDTH - HEIGHT), HEIGHT + WIDTH)), cpFalse);
}
if(j != n - i - 1){
add_domino(space, cpvadd(offset, cpv(HEIGHT*0.75f, (HEIGHT + 3*WIDTH)/2.0f)), cpTrue);
} else {
add_domino(space, cpvadd(offset, cpv(0.5f*(HEIGHT - WIDTH), HEIGHT + WIDTH)), cpFalse);
}
}
}
return space;
}
ETERM *space_new(ETERM *fromp, ETERM *argp) {
// get the args
ETERM *iterationsp = erl_element(1, argp);
ETERM *gravityp = erl_element(2, argp);
ETERM *gravityxp = erl_element(1, gravityp);
ETERM *gravityyp = erl_element(2, gravityp);
// create the new space
cpSpace *space = cpSpaceNew();
cpSpaceSetIterations(space, ERL_INT_VALUE(iterationsp));
cpSpaceSetGravity(space, cpv(ERL_FLOAT_VALUE(gravityxp),
ERL_FLOAT_VALUE(gravityyp)));
cpSpaceSetSleepTimeThreshold(space, 5.0);
// add it to the hash table
ETERM *ref = erl_mk_node_ref();
erlmunk_space *s = (erlmunk_space *) malloc(sizeof(erlmunk_space));
s->id = ERL_REF_NUMBER(ref);
s->space = space;
s->subscriber_count = 0;
s->subscribers = NULL;
s->bodies = NULL;
HASH_ADD_INT(erlmunk_spaces, id, s);
ETERM *atom_ok = erl_mk_atom("ok");
ETERM **space_new_array = (ETERM **) malloc(sizeof(ETERM*) * 2);
space_new_array[0] = atom_ok;
space_new_array[1] = ref;
ETERM *space_new_tuple = erl_mk_tuple(space_new_array, 2);
free(space_new_array);
ETERM *reply_tuple = erl_mk_reply(fromp, space_new_tuple);
ETERM *gen_cast_tuple = erl_mk_gen_cast(reply_tuple);
return gen_cast_tuple;
}
static cpSpace *
init(void)
{
ChipmunkDemoMessageString = "Control the crane by moving the mouse. Press the down arrow to release.";
space = cpSpaceNew();
cpSpaceSetIterations(space, 30);
cpSpaceSetGravity(space, cpv(0, -100));
cpSpaceSetDamping(space, 0.8);
cpBody *staticBody = cpSpaceGetStaticBody(space);
cpShape *shape;
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(320,-240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
// Add a body for the dolly.
dollyBody = cpSpaceAddBody(space, cpBodyNew(10, INFINITY));
cpBodySetPos(dollyBody, cpv(0, 100));
// Add a block so you can see it.
cpSpaceAddShape(space, cpBoxShapeNew(dollyBody, 30, 30));
// Add a groove joint for it to move back and forth on.
cpSpaceAddConstraint(space, cpGrooveJointNew(staticBody, dollyBody, cpv(-250, 100), cpv(250, 100), cpvzero));
// Add a pivot joint to act as a servo motor controlling it's position
// By updating the anchor points of the pivot joint, you can move the dolly.
dollyServo = cpSpaceAddConstraint(space, cpPivotJointNew(staticBody, dollyBody, cpBodyGetPos(dollyBody)));
// Max force the dolly servo can generate.
cpConstraintSetMaxForce(dollyServo, 10000);
// Max speed of the dolly servo
cpConstraintSetMaxBias(dollyServo, 100);
// You can also change the error bias to control how it slows down.
//cpConstraintSetErrorBias(dollyServo, 0.2);
// Add the crane hook.
cpBody *hookBody = cpSpaceAddBody(space, cpBodyNew(1, INFINITY));
cpBodySetPos(hookBody, cpv(0, 50));
// Add a sensor shape for it. This will be used to figure out when the hook touches a box.
shape = cpSpaceAddShape(space, cpCircleShapeNew(hookBody, 10, cpvzero));
cpShapeSetSensor(shape, cpTrue);
cpShapeSetCollisionType(shape, HOOK_SENSOR);
// Add a slide joint to act as a winch motor
// By updating the max length of the joint you can make it pull up the load.
winchServo = cpSpaceAddConstraint(space, cpSlideJointNew(dollyBody, hookBody, cpvzero, cpvzero, 0, INFINITY));
// Max force the dolly servo can generate.
cpConstraintSetMaxForce(winchServo, 30000);
// Max speed of the dolly servo
cpConstraintSetMaxBias(winchServo, 60);
// TODO cleanup
// Finally a box to play with
cpBody *boxBody = cpSpaceAddBody(space, cpBodyNew(30, cpMomentForBox(30, 50, 50)));
cpBodySetPos(boxBody, cpv(200, -200));
// Add a block so you can see it.
shape = cpSpaceAddShape(space, cpBoxShapeNew(boxBody, 50, 50));
cpShapeSetFriction(shape, 0.7);
cpShapeSetCollisionType(shape, CRATE);
cpSpaceAddCollisionHandler(space, HOOK_SENSOR, CRATE, (cpCollisionBeginFunc)HookCrate, NULL, NULL, NULL, NULL);
return space;
}
cpSpace *Buoyancy::Init()
{
ChipmunkDemo::Init();
space = cpSpaceNew();
cpSpaceSetIterations(space, 30);
cpSpaceSetGravity(space, cpv(0, -500));
// cpSpaceSetDamping(space, 0.5);
cpSpaceSetSleepTimeThreshold(space, 0.5f);
cpSpaceSetCollisionSlop(space, 0.5f);
cpBody *body, *staticBody = cpSpaceGetStaticBody(space);
cpShape *shape;
// Create segments around the edge of the screen.
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(-320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(320,-240), cpv(320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(320,-240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,240), cpv(320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
{
// Add the edges of the bucket
cpBB bb = cpBBNew(-300, -200, 100, 0);
cpFloat radius = 5.0f;
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(bb.l, bb.b), cpv(bb.l, bb.t), radius));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(bb.r, bb.b), cpv(bb.r, bb.t), radius));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(bb.l, bb.b), cpv(bb.r, bb.b), radius));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
// Add the sensor for the water.
shape = cpSpaceAddShape(space, cpBoxShapeNew2(staticBody, bb, 0.0));
cpShapeSetSensor(shape, cpTrue);
cpShapeSetCollisionType(shape, 1);
}
{
cpFloat width = 200.0f;
cpFloat height = 50.0f;
cpFloat mass = 0.3*FLUID_DENSITY*width*height;
cpFloat moment = cpMomentForBox(mass, width, height);
body = cpSpaceAddBody(space, cpBodyNew(mass, moment));
cpBodySetPosition(body, cpv(-50, -100));
cpBodySetVelocity(body, cpv(0, -100));
cpBodySetAngularVelocity(body, 1);
shape = cpSpaceAddShape(space, cpBoxShapeNew(body, width, height, 0.0));
cpShapeSetFriction(shape, 0.8f);
}
{
cpFloat width = 40.0f;
cpFloat height = width*2;
cpFloat mass = 0.3*FLUID_DENSITY*width*height;
cpFloat moment = cpMomentForBox(mass, width, height);
body = cpSpaceAddBody(space, cpBodyNew(mass, moment));
cpBodySetPosition(body, cpv(-200, -50));
cpBodySetVelocity(body, cpv(0, -100));
cpBodySetAngularVelocity(body, 1);
shape = cpSpaceAddShape(space, cpBoxShapeNew(body, width, height, 0.0));
cpShapeSetFriction(shape, 0.8f);
}
cpCollisionHandler *handler = cpSpaceAddCollisionHandler(space, 1, 0);
handler->preSolveFunc = (cpCollisionPreSolveFunc)WaterPreSolve;
handler->userData = this;
return space;
}
cpSpace *Chains::Init()
{
ChipmunkDemo::Init();
space = cpSpaceNew();
cpSpaceSetIterations(space, 30);
cpSpaceSetGravity(space, cpv(0, -100));
cpSpaceSetSleepTimeThreshold(space, 0.5f);
cpBody *body, *staticBody = cpSpaceGetStaticBody(space);
cpShape *shape;
// Create segments around the edge of the screen.
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(-320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(320,-240), cpv(320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(320,-240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,240), cpv(320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
cpFloat mass = 1;
cpFloat width = 20;
cpFloat height = 30;
cpFloat spacing = width*0.3;
// Add lots of boxes.
for(int i=0; i<CHAIN_COUNT; i++){
cpBody *prev = NULL;
for(int j=0; j<LINK_COUNT; j++){
cpVect pos = cpv(40*(i - (CHAIN_COUNT - 1)/2.0), 240 - (j + 0.5)*height - (j + 1)*spacing);
body = cpSpaceAddBody(space, cpBodyNew(mass, cpMomentForBox(mass, width, height)));
cpBodySetPosition(body, pos);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(body, cpv(0, (height - width)/2.0), cpv(0, (width - height)/2.0), width/2.0));
cpShapeSetFriction(shape, 0.8f);
cpFloat breakingForce = 80000;
cpConstraint *constraint = NULL;
if(prev == NULL){
constraint = cpSpaceAddConstraint(space, cpSlideJointNew(body, staticBody, cpv(0, height/2), cpv(pos.x, 240), 0, spacing));
} else {
constraint = cpSpaceAddConstraint(space, cpSlideJointNew(body, prev, cpv(0, height/2), cpv(0, -height/2), 0, spacing));
}
cpConstraintSetMaxForce(constraint, breakingForce);
cpConstraintSetPostSolveFunc(constraint, BreakableJointPostSolve);
cpConstraintSetCollideBodies(constraint, cpFalse);
prev = body;
}
}
cpFloat radius = 15.0f;
body = cpSpaceAddBody(space, cpBodyNew(10.0f, cpMomentForCircle(10.0f, 0.0f, radius, cpvzero)));
cpBodySetPosition(body, cpv(0, -240 + radius+5));
cpBodySetVelocity(body, cpv(0, 300));
shape = cpSpaceAddShape(space, cpCircleShapeNew(body, radius, cpvzero));
cpShapeSetElasticity(shape, 0.0f);
cpShapeSetFriction(shape, 0.9f);
return space;
}
__declspec( dllexport ) void setiterations( const void * _in, int in_size, void * _out, int out_sz )
{
cpSpaceSetIterations(&mSpace,PEEKINT(INPUT_MEMBLOCK,0));
}
static cpSpace *
init(void)
{
cpSpace *space = cpSpaceNew();
cpSpaceSetIterations(space, 5);
space->damping = 0.1;
cpFloat mass = 1.0f;
{
cpFloat size = 100.0;
cpBody *body = cpSpaceAddBody(space, cpBodyNew(mass, cpMomentForBox(mass, size, size)));
cpBodySetPosition(body, cpv(100.0, 50.0f));
shape1 = cpSpaceAddShape(space, cpBoxShapeNew(body, size, size, 0.0));
shape1->group = 1;
}{
cpFloat size = 100.0;
cpBody *body = cpSpaceAddBody(space, cpBodyNew(mass, cpMomentForBox(mass, size, size)));
cpBodySetPosition(body, cpv(120.0, -40.0f));
cpBodySetAngle(body, 1e-2);
shape2 = cpSpaceAddShape(space, cpBoxShapeNew(body, size, size, 0.0));
shape2->group = 1;
}
// {
// cpFloat size = 100.0;
// const int NUM_VERTS = 5;
//
// cpVect verts[NUM_VERTS];
// for(int i=0; i<NUM_VERTS; i++){
// cpFloat angle = -2*M_PI*i/((cpFloat) NUM_VERTS);
// verts[i] = cpv(size/2.0*cos(angle), size/2.0*sin(angle));
// }
//
// cpBody *body = cpSpaceAddBody(space, cpBodyNew(mass, cpMomentForPoly(mass, NUM_VERTS, verts, cpvzero)));
// cpBodySetPosition(body, cpv(100.0, 50.0f));
//
// shape1 = cpSpaceAddShape(space, cpPolyShapeNew(body, NUM_VERTS, verts, cpvzero));
// shape1->group = 1;
// }
// {
// cpFloat size = 100.0;
// const int NUM_VERTS = 4;
//
// cpVect verts[NUM_VERTS];
// for(int i=0; i<NUM_VERTS; i++){
// cpFloat angle = -2*M_PI*i/((cpFloat) NUM_VERTS);
// verts[i] = cpv(size/2.0*cos(angle), size/2.0*sin(angle));
// }
//
// cpBody *body = cpSpaceAddBody(space, cpBodyNew(mass, cpMomentForPoly(mass, NUM_VERTS, verts, cpvzero)));
// cpBodySetPosition(body, cpv(100.0, -50.0f));
//
// shape2 = cpSpaceAddShape(space, cpPolyShapeNew(body, NUM_VERTS, verts, cpvzero));
// shape2->group = 1;
// }
//
// {
// cpFloat size = 150.0;
// cpFloat radius = 25.0;
//
// cpVect a = cpv( size/2.0, 0.0);
// cpVect b = cpv(-size/2.0, 0.0);
// cpBody *body = cpSpaceAddBody(space, cpBodyNew(mass, cpMomentForSegment(mass, a, b)));
// cpBodySetPosition(body, cpv(0, 25));
//
// shape1 = cpSpaceAddShape(space, cpSegmentShapeNew(body, a, b, radius));
// shape1->group = 1;
// }
// {
// cpFloat radius = 50.0;
//
// cpBody *body = cpSpaceAddBody(space, cpBodyNew(mass, cpMomentForCircle(mass, 0.0f, radius, cpvzero)));
// cpBodySetPosition(body, cpv(0, -25));
//
// shape2 = cpSpaceAddShape(space, cpCircleShapeNew(body, radius, cpvzero));
// shape2->group = 1;
// }
return space;
}
static cpSpace *
init(void)
{
ChipmunkDemoMessageString = "Use the arrow keys to control the machine.";
cpSpace *space = cpSpaceNew();
cpSpaceSetIterations(space, 20);
cpSpaceSetGravity(space, cpv(0,-500));
cpBody *staticBody = cpSpaceGetStaticBody(space);
cpShape *shape;
cpVect a, b;
// Create segments around the edge of the screen.
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(-320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(320,-240), cpv(320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(320,-240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetFilter(shape, NOT_GRABBABLE_FILTER);
cpFloat offset = 30.0f;
// make chassis
cpFloat chassis_mass = 2.0f;
a = cpv(-offset, 0.0f), b = cpv(offset, 0.0f);
cpBody *chassis = cpSpaceAddBody(space, cpBodyNew(chassis_mass, cpMomentForSegment(chassis_mass, a, b, 0.0f)));
shape = cpSpaceAddShape(space, cpSegmentShapeNew(chassis, a, b, seg_radius));
cpShapeSetFilter(shape, cpShapeFilterNew(1, CP_ALL_CATEGORIES, CP_ALL_CATEGORIES));
// make crank
cpFloat crank_mass = 1.0f;
cpFloat crank_radius = 13.0f;
cpBody *crank = cpSpaceAddBody(space, cpBodyNew(crank_mass, cpMomentForCircle(crank_mass, crank_radius, 0.0f, cpvzero)));
shape = cpSpaceAddShape(space, cpCircleShapeNew(crank, crank_radius, cpvzero));
cpShapeSetFilter(shape, cpShapeFilterNew(1, CP_ALL_CATEGORIES, CP_ALL_CATEGORIES));
cpSpaceAddConstraint(space, cpPivotJointNew2(chassis, crank, cpvzero, cpvzero));
cpFloat side = 30.0f;
int num_legs = 2;
for(int i=0; i<num_legs; i++){
make_leg(space, side, offset, chassis, crank, cpvmult(cpvforangle((cpFloat)(2*i+0)/(cpFloat)num_legs*M_PI), crank_radius));
make_leg(space, side, -offset, chassis, crank, cpvmult(cpvforangle((cpFloat)(2*i+1)/(cpFloat)num_legs*M_PI), crank_radius));
}
motor = cpSpaceAddConstraint(space, cpSimpleMotorNew(chassis, crank, 6.0f));
return space;
}
static cpSpace *
init(void)
{
space = cpSpaceNew();
cpSpaceSetIterations(space, 10);
cpSpaceSetGravity(space, cpv(0, -100));
cpSpaceSetSleepTimeThreshold(space, 0.5f);
cpBody *staticBody = cpSpaceGetStaticBody(space);
cpShape *shape;
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,240), cpv(320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,120), cpv(320,120), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,0), cpv(320,0), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-120), cpv(320,-120), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(320,-240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-320,-240), cpv(-320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(-160,-240), cpv(-160,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(0,-240), cpv(0,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(160,-240), cpv(160,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
shape = cpSpaceAddShape(space, cpSegmentShapeNew(staticBody, cpv(320,-240), cpv(320,240), 0.0f));
cpShapeSetElasticity(shape, 1.0f);
cpShapeSetFriction(shape, 1.0f);
cpShapeSetLayers(shape, NOT_GRABABLE_MASK);
cpVect boxOffset;
cpBody *body1, *body2;
cpVect posA = cpv( 50, 60);
cpVect posB = cpv(110, 60);
#define POS_A cpvadd(boxOffset, posA)
#define POS_B cpvadd(boxOffset, posB)
// Pin Joints - Link shapes with a solid bar or pin.
// Keeps the anchor points the same distance apart from when the joint was created.
boxOffset = cpv(-320, -240);
body1 = addBall(posA, boxOffset);
body2 = addBall(posB, boxOffset);
cpSpaceAddConstraint(space, cpPinJointNew(body1, body2, cpv(15,0), cpv(-15,0)));
// Slide Joints - Like pin joints but with a min/max distance.
// Can be used for a cheap approximation of a rope.
boxOffset = cpv(-160, -240);
body1 = addBall(posA, boxOffset);
body2 = addBall(posB, boxOffset);
cpSpaceAddConstraint(space, cpSlideJointNew(body1, body2, cpv(15,0), cpv(-15,0), 20.0f, 40.0f));
// Pivot Joints - Holds the two anchor points together. Like a swivel.
boxOffset = cpv(0, -240);
body1 = addBall(posA, boxOffset);
body2 = addBall(posB, boxOffset);
cpSpaceAddConstraint(space, cpPivotJointNew(body1, body2, cpvadd(boxOffset, cpv(80,60))));
// cpPivotJointNew() takes it's anchor parameter in world coordinates. The anchors are calculated from that
// cpPivotJointNew2() lets you specify the two anchor points explicitly
// Groove Joints - Like a pivot joint, but one of the anchors is a line segment that the pivot can slide in
boxOffset = cpv(160, -240);
body1 = addBall(posA, boxOffset);
body2 = addBall(posB, boxOffset);
cpSpaceAddConstraint(space, cpGrooveJointNew(body1, body2, cpv(30,30), cpv(30,-30), cpv(-30,0)));
// Damped Springs
boxOffset = cpv(-320, -120);
body1 = addBall(posA, boxOffset);
body2 = addBall(posB, boxOffset);
cpSpaceAddConstraint(space, cpDampedSpringNew(body1, body2, cpv(15,0), cpv(-15,0), 20.0f, 5.0f, 0.3f));
// Damped Rotary Springs
boxOffset = cpv(-160, -120);
body1 = addBar(posA, boxOffset);
body2 = addBar(posB, boxOffset);
// Add some pin joints to hold the circles in place.
cpSpaceAddConstraint(space, cpPivotJointNew(body1, staticBody, POS_A));
cpSpaceAddConstraint(space, cpPivotJointNew(body2, staticBody, POS_B));
cpSpaceAddConstraint(space, cpDampedRotarySpringNew(body1, body2, 0.0f, 3000.0f, 60.0f));
// Rotary Limit Joint
boxOffset = cpv(0, -120);
body1 = addLever(posA, boxOffset);
body2 = addLever(posB, boxOffset);
// Add some pin joints to hold the circles in place.
cpSpaceAddConstraint(space, cpPivotJointNew(body1, staticBody, POS_A));
cpSpaceAddConstraint(space, cpPivotJointNew(body2, staticBody, POS_B));
// Hold their rotation within 90 degrees of each other.
cpSpaceAddConstraint(space, cpRotaryLimitJointNew(body1, body2, -M_PI_2, M_PI_2));
// Ratchet Joint - A rotary ratchet, like a socket wrench
boxOffset = cpv(160, -120);
body1 = addLever(posA, boxOffset);
body2 = addLever(posB, boxOffset);
// Add some pin joints to hold the circles in place.
cpSpaceAddConstraint(space, cpPivotJointNew(body1, staticBody, POS_A));
cpSpaceAddConstraint(space, cpPivotJointNew(body2, staticBody, POS_B));
// Ratchet every 90 degrees
cpSpaceAddConstraint(space, cpRatchetJointNew(body1, body2, 0.0f, M_PI_2));
// Gear Joint - Maintain a specific angular velocity ratio
boxOffset = cpv(-320, 0);
body1 = addBar(posA, boxOffset);
body2 = addBar(posB, boxOffset);
// Add some pin joints to hold the circles in place.
cpSpaceAddConstraint(space, cpPivotJointNew(body1, staticBody, POS_A));
cpSpaceAddConstraint(space, cpPivotJointNew(body2, staticBody, POS_B));
// Force one to sping 2x as fast as the other
cpSpaceAddConstraint(space, cpGearJointNew(body1, body2, 0.0f, 2.0f));
// Simple Motor - Maintain a specific angular relative velocity
boxOffset = cpv(-160, 0);
body1 = addBar(posA, boxOffset);
body2 = addBar(posB, boxOffset);
// Add some pin joints to hold the circles in place.
cpSpaceAddConstraint(space, cpPivotJointNew(body1, staticBody, POS_A));
cpSpaceAddConstraint(space, cpPivotJointNew(body2, staticBody, POS_B));
// Make them spin at 1/2 revolution per second in relation to each other.
cpSpaceAddConstraint(space, cpSimpleMotorNew(body1, body2, M_PI));
// Make a car with some nice soft suspension
boxOffset = cpv(0, 0);
cpBody *wheel1 = addWheel(posA, boxOffset);
cpBody *wheel2 = addWheel(posB, boxOffset);
cpBody *chassis = addChassis(cpv(80, 100), boxOffset);
cpSpaceAddConstraint(space, cpGrooveJointNew(chassis, wheel1, cpv(-30, -10), cpv(-30, -40), cpvzero));
cpSpaceAddConstraint(space, cpGrooveJointNew(chassis, wheel2, cpv( 30, -10), cpv( 30, -40), cpvzero));
cpSpaceAddConstraint(space, cpDampedSpringNew(chassis, wheel1, cpv(-30, 0), cpvzero, 50.0f, 20.0f, 10.0f));
cpSpaceAddConstraint(space, cpDampedSpringNew(chassis, wheel2, cpv( 30, 0), cpvzero, 50.0f, 20.0f, 10.0f));
return space;
}
void Space::setIterations(int value)
{
cpSpaceSetIterations(space,value);
}
