CameraService::Client::Client(const sp<CameraService>& cameraService,
const sp<ICameraClient>& cameraClient,
int cameraId, int cameraFacing, int clientPid, int servicePid) {
#ifdef MTK_CAMERAPROFILE_SUPPORT
AutoCPTLog cptlog(Event_CS_newClient);
#endif
int callingPid = getCallingPid();
LOG1("Client::Client E (pid %d, id %d)", callingPid, cameraId);
mCameraService = cameraService;
mCameraClient = cameraClient;
mCameraId = cameraId;
mCameraFacing = cameraFacing;
mClientPid = clientPid;
mServicePid = servicePid;
mDestructionStarted = false;
cameraService->setCameraBusy(cameraId);
#ifndef MTK_CAMERA_BSP_SUPPORT
// To avoid release/new MediaPlayer when switching between main/sub sensor, and it will reduce the switch time.
#ifdef VENDOR_EDIT
//LiChen@CameraApp, 2013/04/08, Remove for speeding up the opening camera
cameraService->loadSound();
#endif /* VENDOR_EDIT */
#endif
LOG1("Client::Client X (pid %d, id %d)", callingPid, cameraId);
}
MBOOL
MultiShotCc::
onCreateImage()
{
FUNCTION_LOG_START;
AutoCPTLog cptlog(Event_MShot_onCreateImage);
MUINT32 u4ShotCount = 0;
//
mpJpegImageCreateThread->postCommand(Command(Command::eID_YUV_BUF));
// move in jpeg create
CPTLogStr(Event_MShot_onCreateImage, CPTFlagSeparator, "callback EOF");
handleNotifyCallback(ECamShot_NOTIFY_MSG_EOF, 0, 0);
// loop, trigger jpeg create
while(u4ShotCount<mu4ShotCount)
{
CPTLogStr(Event_MShot_onCreateImage, CPTFlagSeparator, "wait jpeg done");
::sem_wait(&semJpeg);
CPTLogStr(Event_MShot_onCreateImage, CPTFlagSeparator, "handle callback");
if(mbIsLastShot || u4ShotCount==mu4ShotCount-1) // last frame
{
MY_LOGD("notify last shot will callback");
handleNotifyCallback(ECamShot_NOTIFY_MSG_CSHOT_END, 0, 0);
handleNotifyCallback(ECamShot_NOTIFY_MSG_FOCUS_VALUE, mFocusVal.u4ValH, mFocusVal.u4ValL);
handleDataCallback(ECamShot_DATA_MSG_JPEG, (mThumbImgBufInfoReady.u4BufVA), mu4ThumbnailSize, reinterpret_cast<MUINT8*>(mJpegImgBufInfoReady.u4BufVA), mu4JpegSize);
break;
}
else // create next jpeg
{
// trigger next jpeg create
//
mpJpegImageCreateThread->postCommand(Command(Command::eID_YUV_BUF));
handleNotifyCallback(ECamShot_NOTIFY_MSG_EOF, 0, 0);
handleNotifyCallback(ECamShot_NOTIFY_MSG_FOCUS_VALUE, mFocusVal.u4ValH, mFocusVal.u4ValL);
handleDataCallback(ECamShot_DATA_MSG_JPEG, (mThumbImgBufInfoReady.u4BufVA), mu4ThumbnailSize, reinterpret_cast<MUINT8*>(mJpegImgBufInfoReady.u4BufVA), mu4JpegSize);
u4ShotCount++;
}
}
// (7) start end
CPTLogStr(Event_MShot_start, CPTFlagSeparator, "post start end sem");
::sem_post(&semStartEnd);
FUNCTION_LOG_END;
return MTRUE;
}
void CameraService::playSound(sound_kind kind) {
#ifdef MTK_CAMERAPROFILE_SUPPORT
AutoCPTLog cptlog(Event_CS_playSound);
#endif
LOG1("playSound(%d)", kind);
Mutex::Autolock lock(mSoundLock);
sp<MediaPlayer> player = mSoundPlayer[kind];
if (player != 0) {
player->seekTo(0);
player->start();
}
#ifdef MTK_CAMERA_BSP_SUPPORT
LOG1("playSound(%d) - tid(%d)", kind, ::gettid());
#endif
}
MBOOL
MultiShotCc::
stop()
{
FUNCTION_LOG_START;
AutoCPTLog cptlog(Event_MShot_stop);
#warning [TODO] for continouous shot
// [CS]+
// (1)
mbCancelShot = MTRUE;
// (2) wait start end
CPTLogStr(Event_MShot_stop, CPTFlagSeparator, "wait start end");
::sem_wait(&semStartEnd); // must call before thread stop, to sure the lastimage notify callback do.
// (3) uninit thread
CPTLogStr(Event_MShot_stop, CPTFlagSeparator, "uninit image create thread");
uninitImageCreateThread();
// (4) end continuous shot jobs in 3A
NS3A::Hal3ABase *p3AObj = Hal3ABase::createInstance(mSensorParam.u4DeviceID);
//p3AObj->endContinuousShotJobs();
p3AObj->destroyInstance();
#if 0
// (4) destroy CamIOPipe
CPTLogStr(Event_MShot_stop, CPTFlagSeparator, "destroy/uninit CamIOPipe");
CHECK_OBJECT(mpCamIOPipe)
MBOOL ret = mpCamIOPipe->uninit();
if (!ret)
{
MY_LOGE("mpCamIOPipe->uninit() fail ");
}
mpCamIOPipe = NULL;
#endif
// (5) prepare buffer
freeShotMem();
// [CS]-
FUNCTION_LOG_END;
//
return MTRUE;
}
MediaPlayer* CameraService::newMediaPlayer(const char *file) {
#ifdef MTK_CAMERAPROFILE_SUPPORT
AutoCPTLog cptlog(Event_CS_newMediaPlayer);
#endif
#ifdef MTK_CAMERA_BSP_SUPPORT
LOG1("[CameraService::newMediaPlayer] + (%s)\r\n", file);
#endif
MediaPlayer* mp = new MediaPlayer();
if (mp->setDataSource(file, NULL) == NO_ERROR) {
mp->setAudioStreamType(AUDIO_STREAM_ENFORCED_AUDIBLE);
mp->prepare();
} else {
ALOGE("Failed to load CameraService sounds: %s", file);
return NULL;
}
#ifdef MTK_CAMERA_BSP_SUPPORT
LOG1("[CameraService::newMediaPlayer] -\r\n");
#endif
return mp;
}
MBOOL
MultiShotNcc::
onCreateImage()
{
AutoCPTLog cptlog(Event_MShot_onCreateImage);
mpYuvImageCreateThread->postCommand(Command(Command::eID_WAKEUP));
MUINT32 u4ShotCount = 0;
//MBOOL bCShotEndCB = false;
// (3) loop, handle jpeg buffer
while(u4ShotCount<mu4ShotCount)
{
CPTLogStr(Event_MShot_onCreateImage, CPTFlagSeparator, "wait jpeg done");
::sem_wait(&semJpeg);
CPTLogStr(Event_MShot_onCreateImage, CPTFlagSeparator, "handle callback");
if(mbIsLastShot || u4ShotCount==mu4ShotCount-1) // last frame
{
MY_LOGD("notify last shot will callback");
handleNotifyCallback(ECamShot_NOTIFY_MSG_CSHOT_END, 0, 0);
handleNotifyCallback(ECamShot_NOTIFY_MSG_FOCUS_VALUE, mFocusVal.u4ValH, mFocusVal.u4ValL);
handleDataCallback(ECamShot_DATA_MSG_JPEG, (mThumbImgBufInfoReady.u4BufVA), mu4ThumbnailSize, reinterpret_cast<MUINT8*>(mJpegImgBufInfoReady.u4BufVA), mu4JpegSize);
break;
}
handleNotifyCallback(ECamShot_NOTIFY_MSG_FOCUS_VALUE, mFocusVal.u4ValH, mFocusVal.u4ValL);
handleDataCallback(ECamShot_DATA_MSG_JPEG, (mThumbImgBufInfoReady.u4BufVA), mu4ThumbnailSize, reinterpret_cast<MUINT8*>(mJpegImgBufInfoReady.u4BufVA), mu4JpegSize);
u4ShotCount++;
}
// (7) start end
CPTLogStr(Event_MShot_start, CPTFlagSeparator, "post start end sem");
::sem_post(&semStartEnd);
return MTRUE;
}
sp<ICamera> CameraService::connect(
const sp<ICameraClient>& cameraClient, int cameraId) {
#ifdef MTK_CAMERAPROFILE_SUPPORT
initCameraProfile();
AutoCPTLog cptlog(Event_CS_connect);
#endif
int callingPid = getCallingPid();
#ifdef VENDOR_EDIT
//LiChen@CameraApp, 2013/03/07, Add for IntelligentSleep
#ifdef OPPO_INTELLIGENT_SLEEP
LOG1("CameraService::connect Intelligent Sleep (pid %d, id %d)", callingPid, cameraId);
LOG1("CameraService::connect Intelligent mIntelSleepId %d", mIntelSleepId);
switch (cameraId) {
case CAMERA_INTELLIGENT_SLEEP:
for(int i = 0 ; i < mNumberOfCameras; i ++) {
if (mBusy[i]) {
return NULL;
}
}
cameraId = 1;
mIntelSleepId = CAMERA_INTELLIGENT_SLEEP;
break;
default:
if (mIntelSleepId == CAMERA_INTELLIGENT_SLEEP) {
int cnt = 0;
while (mClient[1].promote() == NULL && cnt < 10) {
usleep(50000);
cnt++;
}
if (mClient[1].promote() != NULL) {
mClient[1].promote()->disconnect();
}
}
mIntelSleepId = -1;
break;
}
#endif
#endif /* VENDOR_EDIT */
LOG1("CameraService::connect E (pid %d, id %d)", callingPid, cameraId);
if (!mModule) {
ALOGE("Camera HAL module not loaded");
return NULL;
}
sp<Client> client;
//!++
#if defined(ATVCHIP_MTK_ENABLE)
if (cameraId == 0xFF) {
// It's atv, the last cameraId is atv
cameraId = mNumberOfCameras - 1;
status_t status = setProperty(
String8(MtkCameraParameters::PROPERTY_KEY_CLIENT_APPMODE),
String8(MtkCameraParameters::APP_MODE_NAME_MTK_ATV)
);
ALOGD("connected from atv - cameraId(%d) status(%d) \n", cameraId, status);
}
else if (cameraId < 0 || cameraId >= (mNumberOfCameras - 1)) {
ALOGE("CameraService::connect X (pid %d) rejected (invalid cameraId %d), (mNumberOfCameras-1=%d).",
callingPid, cameraId, (mNumberOfCameras-1));
return NULL;
}
#else
if (cameraId < 0 || cameraId >= mNumberOfCameras) {
ALOGE("CameraService::connect X (pid %d) rejected (invalid cameraId %d).",
callingPid, cameraId);
return NULL;
}
#endif
//!--
char value[PROPERTY_VALUE_MAX];
property_get("sys.secpolicy.camera.disabled", value, "0");
if (strcmp(value, "1") == 0) {
// Camera is disabled by DevicePolicyManager.
ALOGI("Camera is disabled. connect X (pid %d) rejected", callingPid);
return NULL;
}
Mutex::Autolock lock(mServiceLock);
if (mClient[cameraId] != 0) {
client = mClient[cameraId].promote();
if (client != 0) {
if (cameraClient->asBinder() == client->getCameraClient()->asBinder()) {
LOG1("CameraService::connect X (pid %d) (the same client)",
callingPid);
return client;
} else {
ALOGW("CameraService::connect X (pid %d) rejected (existing client).",
callingPid);
return NULL;
}
}
mClient[cameraId].clear();
}
if (mBusy[cameraId]) {
ALOGW("CameraService::connect X (pid %d) rejected"
" (camera %d is still busy).", callingPid, cameraId);
return NULL;
}
struct camera_info info;
if (mModule->get_camera_info(cameraId, &info) != OK) {
ALOGE("Invalid camera id %d", cameraId);
return NULL;
}
int deviceVersion;
if (mModule->common.module_api_version == CAMERA_MODULE_API_VERSION_2_0) {
deviceVersion = info.device_version;
} else {
deviceVersion = CAMERA_DEVICE_API_VERSION_1_0;
}
switch(deviceVersion) {
case CAMERA_DEVICE_API_VERSION_1_0:
client = new CameraClient(this, cameraClient, cameraId,
info.facing, callingPid, getpid());
break;
case CAMERA_DEVICE_API_VERSION_2_0:
client = new Camera2Client(this, cameraClient, cameraId,
info.facing, callingPid, getpid());
break;
default:
ALOGE("Unknown camera device HAL version: %d", deviceVersion);
return NULL;
}
#ifdef MTK_CAMERA_BSP_SUPPORT
// To avoid release/new MediaPlayer when switching between main/sub sensor, and it will reduce the switch time.
#ifdef VENDOR_EDIT
//LiChen@CameraApp, 2013/04/08, Remove for speeding up the opening camera
loadSound();
#endif /* VENDOR_EDIT */
#endif
#ifdef MTK_CAMERAPROFILE_SUPPORT
CPTLog(Event_CS_newCamHwIF, CPTFlagStart);
#endif
if (client->initialize(mModule) != OK) {
#ifdef MTK_CAMERAPROFILE_SUPPORT
CPTLogStr(Event_CS_newCamHwIF, CPTFlagEnd, "new CameraHardwareInterface failed");
#endif
#ifdef MTK_CAMERA_BSP_SUPPORT
// To avoid release/new MediaPlayer when switching between main/sub sensor, and it will reduce the switch time.
releaseSound();
#endif
return NULL;
}
#ifdef MTK_CAMERAPROFILE_SUPPORT
CPTLog(Event_CS_newCamHwIF, CPTFlagEnd);
#endif
cameraClient->asBinder()->linkToDeath(this);
mClient[cameraId] = client;
LOG1("CameraService::connect X (id %d, this pid is %d)", cameraId, getpid());
return client;
}
MBOOL
MultiShotNcc::
start(SensorParam const & rSensorParam, MUINT32 u4ShotCount)
{
FUNCTION_LOG_START;
AutoCPTLog cptlog(Event_MShot_start);
mSensorParam = rSensorParam;
//
dumpSensorParam(mSensorParam);
MY_LOGD("[start] enabled msg (nitify, data) = (0x%x, 0x%x)", mi4NotifyMsgSet, mi4DataMsgSet);
//
if (!isDataMsgEnabled(ECamShot_DATA_MSG_ALL) && !isNotifyMsgEnabled(ECamShot_NOTIFY_MSG_ALL))
{
MY_LOGE("[start] No data msg enable !");
return MFALSE;
}
mbSet3ACapMode = MTRUE;
mbCancelShot = MFALSE;
mbIsLastShot = MFALSE;
mu4JpegCount = 0;
mu4ShotCount = u4ShotCount;
mbJpegSemPost = MFALSE;
::sem_init(&semJpeg, 0, 0);
::sem_init(&semThumbnail, 0, 0);
::sem_init(&semStartEnd, 0, 0);
MY_LOGD("mu4ShotCount = %d", mu4ShotCount);
EImageFormat eImgFmt = querySensorFmt(rSensorParam.u4DeviceID, rSensorParam.u4Scenario, rSensorParam.u4Bitdepth);
CPTLogStr(Event_MShot_start, CPTFlagSeparator, "create/init CamIOPipe");
// (1). Create Instance
if (NULL == mpCamIOPipe)
{
mpCamIOPipe = ICamIOPipe::createInstance(eSWScenarioID_CAPTURE_NORMAL, static_cast<EScenarioFmt>(mapScenarioType(eImgFmt)));
CHECK_OBJECT(mpCamIOPipe);
// (2). Query port property
#warning [TODO] Query port property
// (3). init
mpCamIOPipe->init();
}
// (2) prepare buffer
CPTLogStr(Event_MShot_start, CPTFlagSeparator, "prepare buffer");
// (2.1) raw buffer
mRawImgBufInfo = querySensorRawImgBufInfo();
// (2.2) yuv buffer
mYuvImgBufInfoWrite = queryYuvRawImgBufInfo();
mYuvImgBufInfoReady = queryYuvRawImgBufInfo();
mYuvImgBufInfoRead = queryYuvRawImgBufInfo();
// (2.3) PostView buffer
mPostViewImgBufInfoWrite = queryPostViewImgInfo();
mPostViewImgBufInfoReady = queryPostViewImgInfo();
mPostViewImgBufInfoRead = queryPostViewImgInfo();
// (2.4) jpeg buffer
mJpegImgBufInfoWrite = queryJpegImgBufInfo();
mJpegImgBufInfoReady = queryJpegImgBufInfo();
// (2.5) Thumb buffer
mThumbImgBufInfoYuv = queryThumbYuvImgBufInfo();
mThumbImgBufInfoWrite = queryThumbImgBufInfo();
mThumbImgBufInfoReady = queryThumbImgBufInfo();
mThumbImgBufInfoTemp = queryThumbTempImgBufInfo();
// (3) init thread
CPTLogStr(Event_MShot_start, CPTFlagSeparator, "init image create thread");
initImageCreateThread();
// (4) start c-shot loop
CPTLogStr(Event_MShot_start, CPTFlagSeparator, "wakeup create thread");
mpImageCreateThread->postCommand(Command(Command::eID_WAKEUP));
//onCreateImage();
FUNCTION_LOG_END;
//
return MTRUE;
}
