static int cx8800_start_vbi_dma(struct cx8800_dev *dev,
struct cx88_dmaqueue *q,
struct cx88_buffer *buf)
{
struct cx88_core *core = dev->core;
/* setup fifo + format */
cx88_sram_channel_setup(dev->core, &cx88_sram_channels[SRAM_CH24],
buf->vb.width, buf->risc.dma);
cx_write(MO_VBOS_CONTROL, ( (1 << 18) | // comb filter delay fixup
(1 << 15) | // enable vbi capture
(1 << 11) ));
/* reset counter */
cx_write(MO_VBI_GPCNTRL, GP_COUNT_CONTROL_RESET);
q->count = 1;
/* enable irqs */
cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT);
cx_set(MO_VID_INTMSK, 0x0f0088);
/* enable capture */
cx_set(VID_CAPTURE_CONTROL,0x18);
/* start dma */
cx_set(MO_DEV_CNTRL2, (1<<5));
cx_set(MO_VID_DMACNTRL, 0x88);
return 0;
}
int cx25821_start_audio_dma_upstream(struct cx25821_dev *dev,
struct sram_channel *sram_ch)
{
u32 tmp = 0;
int err = 0;
// Set the physical start address of the RISC program in the initial program counter(IPC) member of the CMDS.
cx_write(sram_ch->cmds_start + 0, dev->_risc_phys_addr);
cx_write(sram_ch->cmds_start + 4, 0); /* Risc IPC High 64 bits 63-32 */
/* reset counter */
cx_write(sram_ch->gpcnt_ctl, 3);
//Set the line length (It looks like we do not need to set the line length)
cx_write(sram_ch->aud_length, AUDIO_LINE_SIZE & FLD_AUD_DST_LN_LNGTH);
//Set the input mode to 16-bit
tmp = cx_read(sram_ch->aud_cfg);
tmp |=
FLD_AUD_SRC_ENABLE | FLD_AUD_DST_PK_MODE | FLD_AUD_CLK_ENABLE |
FLD_AUD_MASTER_MODE | FLD_AUD_CLK_SELECT_PLL_D | FLD_AUD_SONY_MODE;
cx_write(sram_ch->aud_cfg, tmp);
// Read and write back the interrupt status register to clear it
tmp = cx_read(sram_ch->int_stat);
cx_write(sram_ch->int_stat, tmp);
// Clear our bits from the interrupt status register.
cx_write(sram_ch->int_stat, _intr_msk);
//Set the interrupt mask register, enable irq.
cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit));
tmp = cx_read(sram_ch->int_msk);
cx_write(sram_ch->int_msk, tmp |= _intr_msk);
err =
request_irq(dev->pci->irq, cx25821_upstream_irq_audio,
IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
if (err < 0) {
printk(KERN_ERR "%s: can't get upstream IRQ %d\n", dev->name,
dev->pci->irq);
goto fail_irq;
}
// Start the DMA engine
tmp = cx_read(sram_ch->dma_ctl);
cx_set(sram_ch->dma_ctl, tmp | sram_ch->fld_aud_risc_en);
dev->_audio_is_running = 1;
dev->_is_first_audio_frame = 1;
// The fifo_en bit turns on by the first Risc program
cx25821_wait_fifo_enable(dev, sram_ch);
return 0;
fail_irq:
cx25821_dev_unregister(dev);
return err;
}
static int cx8800_start_vbi_dma(struct cx8800_dev *dev,
struct cx88_dmaqueue *q,
struct cx88_buffer *buf)
{
struct cx88_core *core = dev->core;
cx88_sram_channel_setup(dev->core, &cx88_sram_channels[SRAM_CH24],
buf->vb.width, buf->risc.dma);
cx_write(MO_VBOS_CONTROL, ( (1 << 18) |
(1 << 15) |
(1 << 11) ));
cx_write(MO_VBI_GPCNTRL, GP_COUNT_CONTROL_RESET);
q->count = 1;
cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT);
cx_set(MO_VID_INTMSK, 0x0f0088);
cx_set(VID_CAPTURE_CONTROL,0x18);
cx_set(MO_DEV_CNTRL2, (1<<5));
cx_set(MO_VID_DMACNTRL, 0x88);
return 0;
}
static int cx23885_start_vbi_dma(struct cx23885_dev *dev,
struct cx23885_dmaqueue *q,
struct cx23885_buffer *buf)
{
dprintk(1, "%s()\n", __func__);
/* setup fifo + format */
cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02],
VBI_LINE_LENGTH, buf->risc.dma);
/* reset counter */
cx_write(VID_A_GPCNT_CTL, 3);
cx_write(VID_A_VBI_CTRL, 3);
cx_write(VBI_A_GPCNT_CTL, 3);
q->count = 0;
/* enable irq */
cx23885_irq_add_enable(dev, 0x01);
cx_set(VID_A_INT_MSK, 0x000022);
/* start dma */
cx_set(DEV_CNTRL2, (1<<5));
cx_set(VID_A_DMA_CTL, 0x22); /* FIFO and RISC enable */
return 0;
}
cx_int16 Fast_Member_resolveMember(Fast_Member _this, cx_type type, cx_string member) {
cx_object o = NULL;
if (cx_instanceof(cx_type(cx_interface_o), type) && !strcmp(member, "super")) {
if (cx_interface(type)->base) {
_this->member = NULL;
cx_set(&Fast_Expression(_this)->type, cx_interface(type)->base);
} else {
cx_id id;
Fast_Parser_error(yparser(), "type '%s' has no base", Fast_Parser_id(type, id));
goto error;
}
} else {
if (cx_instanceof(cx_type(cx_interface_o), type)) {
o = cx_interface_resolveMember(cx_interface(type), member);
}
if (!o) {
/* If no members are found for name, look for methods */
o = cx_type_resolveProcedure(type, member);
if (!o) {
cx_id id;
Fast_Parser_error(yparser(), "unresolved member '%s' for type '%s'", member, Fast_Parser_id(type, id));
goto error;
}
cx_set(&Fast_Expression(_this)->type, cx_function(o)->returnType);
} else {
cx_set(&Fast_Expression(_this)->type, cx_member(o)->type);
}
_this->member = o; cx_keep_ext(_this, o, "Keep object for member-expression");
}
return 0;
error:
return -1;
}
static int cx88_pci_nano_callback(void *ptr, int command, int arg)
{
struct cx88_core *core = ptr;
switch (command) {
case XC2028_TUNER_RESET:
/* Send the tuner in then out of reset */
dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg);
switch (core->boardnr) {
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
/* GPIO-4 xc3028 tuner */
cx_set(MO_GP0_IO, 0x00001000);
cx_clear(MO_GP0_IO, 0x00000010);
msleep(100);
cx_set(MO_GP0_IO, 0x00000010);
msleep(100);
break;
}
break;
case XC2028_RESET_CLK:
dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg);
break;
default:
dprintk(1, "%s: unknown command %d, arg %d\n", __func__,
command, arg);
return -EINVAL;
}
return 0;
}
int cx25821_start_video_dma(struct cx25821_dev *dev,
struct cx25821_dmaqueue *q,
struct cx25821_buffer *buf,
const struct sram_channel *channel)
{
int tmp = 0;
/* setup fifo + format */
cx25821_sram_channel_setup(dev, channel, buf->bpl, buf->risc.dma);
/* reset counter */
cx_write(channel->gpcnt_ctl, 3);
/* enable irq */
cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << channel->i));
cx_set(channel->int_msk, 0x11);
/* start dma */
cx_write(channel->dma_ctl, 0x11); /* FIFO and RISC enable */
/* make sure upstream setting if any is reversed */
tmp = cx_read(VID_CH_MODE_SEL);
cx_write(VID_CH_MODE_SEL, tmp & 0xFFFFFE00);
return 0;
}
static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg)
{
struct cx23885_tsport *port = ptr;
struct cx23885_dev *dev = port->dev;
switch (command) {
case XC2028_TUNER_RESET:
/* Send the tuner in then out of reset */
/* GPIO-2 xc3028 tuner */
dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg);
cx_set(GP0_IO, 0x00040000);
cx_clear(GP0_IO, 0x00000004);
msleep(5);
cx_set(GP0_IO, 0x00040004);
msleep(5);
break;
case XC2028_RESET_CLK:
dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg);
break;
default:
dprintk(1, "%s: unknown command %d, arg %d\n", __func__,
command, arg);
return -EINVAL;
}
return 0;
}
static int start_video_dma(struct cx8800_dev *dev,
struct cx88_dmaqueue *q,
struct cx88_buffer *buf)
{
struct cx88_core *core = dev->core;
cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH21],
buf->bpl, buf->risc.dma);
cx88_set_scale(core, buf->vb.width, buf->vb.height, buf->vb.field);
cx_write(MO_COLOR_CTRL, buf->fmt->cxformat | ColorFormatGamma);
cx_write(MO_VIDY_GPCNTRL,GP_COUNT_CONTROL_RESET);
q->count = 1;
cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT);
cx_set(MO_VID_INTMSK, 0x0f0011);
cx_set(VID_CAPTURE_CONTROL,0x06);
cx_set(MO_DEV_CNTRL2, (1<<5));
cx_set(MO_VID_DMACNTRL, 0x11);
return 0;
}
static int cx25821_start_video_dma_upstream(struct cx25821_channel *chan,
const struct sram_channel *sram_ch)
{
struct cx25821_video_out_data *out = chan->out;
struct cx25821_dev *dev = chan->dev;
u32 tmp = 0;
int err = 0;
/* 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for
* channel A-C
*/
tmp = cx_read(VID_CH_MODE_SEL);
cx_write(VID_CH_MODE_SEL, tmp | 0x1B0001FF);
/* Set the physical start address of the RISC program in the initial
* program counter(IPC) member of the cmds.
*/
cx_write(sram_ch->cmds_start + 0, out->_dma_phys_addr);
/* Risc IPC High 64 bits 63-32 */
cx_write(sram_ch->cmds_start + 4, 0);
/* reset counter */
cx_write(sram_ch->gpcnt_ctl, 3);
/* Clear our bits from the interrupt status register. */
cx_write(sram_ch->int_stat, _intr_msk);
/* Set the interrupt mask register, enable irq. */
cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit));
tmp = cx_read(sram_ch->int_msk);
cx_write(sram_ch->int_msk, tmp |= _intr_msk);
err = request_irq(dev->pci->irq, cx25821_upstream_irq,
IRQF_SHARED, dev->name, chan);
if (err < 0) {
pr_err("%s: can't get upstream IRQ %d\n",
dev->name, dev->pci->irq);
goto fail_irq;
}
/* Start the DMA engine */
tmp = cx_read(sram_ch->dma_ctl);
cx_set(sram_ch->dma_ctl, tmp | FLD_VID_RISC_EN);
out->_is_running = 1;
out->_is_first_frame = 1;
return 0;
fail_irq:
cx25821_dev_unregister(dev);
return err;
}
int cx88_video_mux(struct cx88_core *core, unsigned int input)
{
dprintk(1,"video_mux: %d [vmux=%d,gpio=0x%x,0x%x,0x%x,0x%x]\n",
input, INPUT(input).vmux,
INPUT(input).gpio0,INPUT(input).gpio1,
INPUT(input).gpio2,INPUT(input).gpio3);
core->input = input;
cx_andor(MO_INPUT_FORMAT, 0x03 << 14, INPUT(input).vmux << 14);
cx_write(MO_GP3_IO, INPUT(input).gpio3);
cx_write(MO_GP0_IO, INPUT(input).gpio0);
cx_write(MO_GP1_IO, INPUT(input).gpio1);
cx_write(MO_GP2_IO, INPUT(input).gpio2);
switch (INPUT(input).type) {
case CX88_VMUX_SVIDEO:
cx_set(MO_AFECFG_IO, 0x00000001);
cx_set(MO_INPUT_FORMAT, 0x00010010);
cx_set(MO_FILTER_EVEN, 0x00002020);
cx_set(MO_FILTER_ODD, 0x00002020);
break;
default:
cx_clear(MO_AFECFG_IO, 0x00000001);
cx_clear(MO_INPUT_FORMAT, 0x00010010);
cx_clear(MO_FILTER_EVEN, 0x00002020);
cx_clear(MO_FILTER_ODD, 0x00002020);
break;
}
if (INPUT(input).audioroute) {
if (core->board.audio_chip &&
core->board.audio_chip == V4L2_IDENT_WM8775) {
call_all(core, audio, s_routing,
INPUT(input).audioroute, 0, 0);
}
if (INPUT(input).type != CX88_VMUX_TELEVISION ) {
core->tvaudio = WW_I2SADC;
cx88_set_tvaudio(core);
} else {
cx_write(AUD_I2SCNTL, 0x0);
cx_clear(AUD_CTL, EN_I2SIN_ENABLE);
}
}
return 0;
}
static int cx23885_start_audio_dma(struct cx23885_audio_dev *chip)
{
struct cx23885_audio_buffer *buf = chip->buf;
struct cx23885_dev *dev = chip->dev;
struct sram_channel *audio_ch =
&dev->sram_channels[AUDIO_SRAM_CHANNEL];
dprintk(1, "%s()\n", __func__);
/* Make sure RISC/FIFO are off before changing FIFO/RISC settings */
cx_clear(AUD_INT_DMA_CTL, 0x11);
/* setup fifo + format - out channel */
cx23885_sram_channel_setup(chip->dev, audio_ch, buf->bpl,
buf->risc.dma);
/* sets bpl size */
cx_write(AUD_INT_A_LNGTH, buf->bpl);
/* This is required to get good audio (1 seems to be ok) */
cx_write(AUD_INT_A_MODE, 1);
/* reset counter */
cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET);
atomic_set(&chip->count, 0);
dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d "
"byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start+12)>>1,
chip->num_periods, buf->bpl * chip->num_periods);
/* Enables corresponding bits at AUD_INT_STAT */
cx_write(AUDIO_INT_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC |
AUD_INT_DN_RISCI1);
/* Clean any pending interrupt bits already set */
cx_write(AUDIO_INT_INT_STAT, ~0);
/* enable audio irqs */
cx_set(PCI_INT_MSK, chip->dev->pci_irqmask | PCI_MSK_AUD_INT);
/* start dma */
cx_set(DEV_CNTRL2, (1<<5)); /* Enables Risc Processor */
cx_set(AUD_INT_DMA_CTL, 0x11); /* audio downstream FIFO and
RISC enable */
if (audio_debug)
cx23885_sram_channel_dump(chip->dev, audio_ch);
return 0;
}
/* Handle subscribe message */
static int web_subscribe(struct mg_connection *conn) {
char *flag_start = conn->content + 2;
char *id_start = strchr(flag_start, ' ') + 1;
int len;
cx_id id;
cx_object o = NULL;
web_wsconnection wc = web_wsconnection(conn->connection_param);
/* Check if message is correct */
if ((id_start - conn->content) > (int)conn->content_len) {
printf("error: message '%.*s' not correctly formatted\n",
(int)conn->content_len, conn->content);
goto error;
}
/* Copy identifier to buffer */
len = (int)conn->content_len - (id_start - conn->content);
memcpy(id, id_start, len);
id[len] = '\0';
/* Silence previous subscription */
if (wc->observing) {
cx_silence(wc->observing, web_wsconnection_onUpdate_o, wc);
cx_silence(wc->observing, web_wsconnection_onDelete_o, wc);
}
wc->eventCount = 0;
/* Lookup object */
o = cx_resolve(NULL, id);
if (!o) {
goto error;
} else if (!cx_checkAttr(o, CX_ATTR_OBSERVABLE)) {
/* Can't listen if object is not observable, but can send the client the value */
cx_set(&wc->observing, NULL);
web_wsconnection_send(wc, o, TRUE, TRUE, TRUE, TRUE, FALSE);
wc->eventCount++;
} else {
/* Configure observer to listen for updates */
cx_set(&wc->observing, o);
cx_listen(o, web_wsconnection_onUpdate_o, wc);
cx_listen(o, web_wsconnection_onDelete_o, wc);
}
return 0;
error:
return -1;
}
int cx25821_start_video_dma_upstream_ch2(struct cx25821_dev *dev,
struct sram_channel *sram_ch)
{
u32 tmp = 0;
int err = 0;
// 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for channel A-C
tmp = cx_read(VID_CH_MODE_SEL);
cx_write(VID_CH_MODE_SEL, tmp | 0x1B0001FF);
// Set the physical start address of the RISC program in the initial program counter(IPC) member of the cmds.
cx_write(sram_ch->cmds_start + 0, dev->_dma_phys_addr_ch2);
cx_write(sram_ch->cmds_start + 4, 0); /* Risc IPC High 64 bits 63-32 */
/* reset counter */
cx_write(sram_ch->gpcnt_ctl, 3);
// Clear our bits from the interrupt status register.
cx_write(sram_ch->int_stat, _intr_msk);
//Set the interrupt mask register, enable irq.
cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit));
tmp = cx_read(sram_ch->int_msk);
cx_write(sram_ch->int_msk, tmp |= _intr_msk);
err =
request_irq(dev->pci->irq, cx25821_upstream_irq_ch2,
IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
if (err < 0) {
printk(KERN_ERR "%s: can't get upstream IRQ %d\n", dev->name,
dev->pci->irq);
goto fail_irq;
}
// Start the DMA engine
tmp = cx_read(sram_ch->dma_ctl);
cx_set(sram_ch->dma_ctl, tmp | FLD_VID_RISC_EN);
dev->_is_running_ch2 = 1;
dev->_is_first_frame_ch2 = 1;
return 0;
fail_irq:
cx25821_dev_unregister(dev);
return err;
}
/* ::cortex::lang::bitmask::init() */
cx_int16 cx_bitmask_init(cx_bitmask _this) {
/* $begin(::cortex::lang::bitmask::init) */
cx_primitive(_this)->kind = CX_BITMASK;
cx_primitive(_this)->width = CX_WIDTH_32;
cx_set(&cx_type(_this)->defaultType, cx_constant_o);
return cx_primitive_init((cx_primitive)_this);
/* $end */
}
/* ::cortex::Fast::New::construct() */
cx_int16 Fast_New_construct(Fast_New _this) {
/* $begin(::cortex::Fast::New::construct) */
Fast_Node(_this)->kind = Fast_NewExpr;
cx_set(&Fast_Expression(_this)->type, _this->type);
Fast_Expression(_this)->isReference = TRUE;
return 0;
/* $end */
}
static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
{
struct cx23885_dev *dev = (struct cx23885_dev *)device;
unsigned long timeout = jiffies + msecs_to_jiffies(1);
uint32_t mem = 0;
mem = cx_read(MC417_RWD);
if (read)
cx_set(MC417_OEN, ALT_DATA);
else {
cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */
mem &= ~ALT_DATA;
mem |= (data & ALT_DATA);
}
if (flag)
mem |= ALT_AD_RG;
else
mem &= ~ALT_AD_RG;
mem &= ~ALT_CS;
if (read)
mem = (mem & ~ALT_RD) | ALT_WR;
else
mem = (mem & ~ALT_WR) | ALT_RD;
cx_write(MC417_RWD, mem); /* start RW cycle */
for (;;) {
mem = cx_read(MC417_RWD);
if ((mem & ALT_RDY) == 0)
break;
if (time_after(jiffies, timeout))
break;
udelay(1);
}
cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS);
if (read)
return mem & ALT_DATA;
return 0;
};
void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
{
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
if (dev->sd_ir && (dev->pci_irqmask & PCI_MSK_IR))
cx_set(PCI_INT_MSK, PCI_MSK_IR);
break;
}
}
int cx23885_tuner_callback(void *priv, int component, int command, int arg)
{
struct cx23885_tsport *port = priv;
struct cx23885_dev *dev = port->dev;
u32 bitmask = 0;
if ((command == XC2028_RESET_CLK) || (command == XC2028_I2C_FLUSH))
return 0;
if (command != 0) {
printk(KERN_ERR "%s(): Unknown command 0x%x.\n",
__func__, command);
return -EINVAL;
}
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1400:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
/* Tuner Reset Command */
bitmask = 0x04;
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
/* Two identical tuners on two different i2c buses,
* we need to reset the correct gpio. */
if (port->nr == 1)
bitmask = 0x01;
else if (port->nr == 2)
bitmask = 0x04;
break;
case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
/* Tuner Reset Command */
bitmask = 0x02;
break;
case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
altera_ci_tuner_reset(dev, port->nr);
break;
}
if (bitmask) {
/* Drive the tuner into reset and back out */
cx_clear(GP0_IO, bitmask);
mdelay(200);
cx_set(GP0_IO, bitmask);
}
return 0;
}
static int lgdt330x_pll_rf_set(struct dvb_frontend* fe, int index)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
dprintk(1, "%s: index = %d\n", __func__, index);
if (index == 0)
cx_clear(MO_GP0_IO, 8);
else
cx_set(MO_GP0_IO, 8);
return 0;
}
/* ::cortex::lang::function::bind() */
cx_int16 cx_function_bind(cx_function _this) {
/* $begin(::cortex::lang::function::bind) */
/* Count the size based on the parameters and store parameters in slots */
if (!_this->size) {
cx_uint32 i;
for(i=0; i<_this->parameters.length; i++) {
if (_this->parameters.buffer[i].passByReference) {
_this->size += sizeof(cx_word);
} else {
cx_type paramType = _this->parameters.buffer[i].type;
switch(paramType->kind) {
case CX_ANY:
_this->size += sizeof(cx_any);
break;
case CX_PRIMITIVE:
_this->size += cx_type_sizeof(paramType);
break;
default:
_this->size += sizeof(void*);
break;
}
}
}
/* Add size of this-pointer - this must be moved to impl of methods, delegates and callbacks. */
if (!(cx_typeof(_this) == cx_type(cx_function_o))) {
if (cx_typeof(_this) == cx_type(cx_metaprocedure_o)) {
_this->size += sizeof(cx_any);
} else {
_this->size += sizeof(cx_object);
}
}
}
/* If no returntype is set, make it void */
if (!_this->returnType) {
cx_set(&_this->returnType, cx_void_o);
}
/* Bind with interface if possible */
if (cx_delegate_bind(_this)) {
goto error;
}
return 0;
error:
return -1;
/* $end */
}
void cx88_card_setup_pre_i2c(struct cx88_core *core)
{
switch (core->board) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Bring the 702 demod up before i2c scanning/attach or devices are hidden */
/* We leave here with the 702 on the bus */
cx_write(MO_GP0_IO, 0x0000e780);
udelay(1000);
cx_clear(MO_GP0_IO, 0x00000080);
udelay(50);
cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
udelay(1000);
break;
}
}
/* ::cortex::Fast::DelegateCall::construct() */
cx_int16 Fast_DelegateCall_construct(Fast_DelegateCall _this) {
/* $begin(::cortex::Fast::DelegateCall::construct) */
if (!_this->expr) {
Fast_Parser_error(yparser(), "no expression provided for delegate call");
goto error;
} else {
cx_uint32 i;
cx_delegate type = cx_delegate(Fast_Expression_getType(_this->expr));
/* Create expression to obtain pointer to the instance */
Fast_String instanceString = Fast_String__create("instance");
Fast_Member iExpr = Fast_Member__create(_this->expr, Fast_Expression(instanceString));
cx_set(&Fast_Call(_this)->instanceExpr, iExpr);
Fast_Parser_collect(yparser(), iExpr);
Fast_Parser_collect(yparser(), instanceString);
/* Set function expression to delegate */
cx_set(&Fast_Call(_this)->functionExpr, _this->expr);
/* Set parameters */
cx_set(&Fast_Call(_this)->returnType, type->returnType);
Fast_Call(_this)->returnsReference = type->returnsReference;
cx_parameter_seq__size(&Fast_Call(_this)->parameters, type->parameters.length);
for (i = 0; i < type->parameters.length; i++) {
cx_set(&Fast_Call(_this)->parameters.buffer[i].type, type->parameters.buffer[i].type);
Fast_Call(_this)->parameters.buffer[i].passByReference = type->parameters.buffer[i].passByReference;
}
}
return Fast_Call_construct(Fast_Call(_this));
error:
return -1;
/* $end */
}
/* ::cortex::ic::element::construct() */
cx_int16 ic_element_construct(ic_element _this) {
/* $begin(::cortex::ic::element::construct) */
cx_id name;
cx_collection type = cx_collection(_this->base->type);
ic_storage(_this)->kind = IC_ELEMENT;
cx_set(&ic_storage(_this)->type, type->elementType);
cx_set(&ic_storage(_this)->base, _this->base);
ic_storage(_this)->isReference = type->elementType->reference;
if (_this->index) {
cx_string elemStr = ic_node_str(_this->index, NULL);
sprintf(name, "%s[%s]", _this->base->name, elemStr);
cx_dealloc(elemStr);
} else {
sprintf(name, "*%s", _this->base->name);
}
ic_storage(_this)->name = cx_strdup(name);
return ic_storage_construct(ic_storage(_this));
/* $end */
}
int f300_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct cx23885_tsport *port = fe->dvb->priv;
struct cx23885_dev *dev = port->dev;
u8 buf[16];
buf[0] = 0x05;
buf[1] = 0x38;/* write port */
buf[2] = 0x01;/* A port, lnb power */
switch (voltage) {
case SEC_VOLTAGE_13:
buf[3] = 0x01;/* power on */
buf[4] = 0x02;/* B port, H/V */
buf[5] = 0x00;/*13V v*/
cx_set(MC417_RWD, 0x00000200);
cx_clear(MC417_RWD, 0x00000400);
break;
case SEC_VOLTAGE_18:
buf[3] = 0x01;
buf[4] = 0x02;
buf[5] = 0x01;/* 18V h*/
cx_set(MC417_RWD, 0x00000200);
cx_set(MC417_RWD, 0x00000400);
break;
case SEC_VOLTAGE_OFF:
buf[3] = 0x00;/* power off */
buf[4] = 0x00;
buf[5] = 0x00;
cx_clear(MC417_RWD, 0x00000200);
break;
}
return f300_xfer(fe, buf);
}
/* ::cortex::Fast::Element::construct() */
cx_int16 Fast_Element_construct(Fast_Element _this) {
/* $begin(::cortex::Fast::Element::construct) */
cx_type lvalueType, rvalueType;
Fast_Storage(_this)->kind = Fast_ElementStorage;
lvalueType = Fast_Expression_getType(_this->lvalue);
if (lvalueType) {
if (lvalueType->kind == CX_COLLECTION) {
rvalueType = Fast_Expression_getType(_this->rvalue);
if (rvalueType) {
if (cx_collection(lvalueType)->kind != CX_MAP) {
if (!cx_type_castable(cx_type(cx_uint32_o), rvalueType)) {
cx_id id;
Fast_Parser_error(yparser(), "expected integer expression for index, got '%s'", Fast_Parser_id(rvalueType, id));
goto error;
}
} else {
if (!cx_type_castable(cx_map(lvalueType)->keyType, rvalueType)) {
cx_id id, id2;
Fast_Parser_error(yparser(), "expected expression of type '%s' for key, got '%s'",
Fast_Parser_id(cx_map(lvalueType)->keyType, id), Fast_Parser_id(rvalueType, id2));
goto error;
}
}
}
/* Set type of expression */
cx_set(&Fast_Expression(_this)->type, cx_collection(lvalueType)->elementType);
} else {
cx_id id;
Fast_Parser_error(yparser(), "cannot obtain element from _this of non-collection type '%s'", Fast_Parser_id(lvalueType, id));
goto error;
}
} else {
Fast_Parser_error(yparser(), "dynamic expressions are not yet supported");
goto error;
}
Fast_Expression(_this)->isReference = cx_collection(lvalueType)->elementType->reference;
return Fast_Storage_construct(Fast_Storage(_this));
error:
return -1;
/* $end */
}
void cx25821_stop_upstream_video(struct cx25821_channel *chan)
{
struct cx25821_video_out_data *out = chan->out;
struct cx25821_dev *dev = chan->dev;
const struct sram_channel *sram_ch = chan->sram_channels;
u32 tmp = 0;
if (!out->_is_running) {
pr_info("No video file is currently running so return!\n");
return;
}
/* Set the interrupt mask register, disable irq. */
cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) & ~(1 << sram_ch->irq_bit));
/* Disable RISC interrupts */
tmp = cx_read(sram_ch->int_msk);
cx_write(sram_ch->int_msk, tmp & ~_intr_msk);
/* Turn OFF risc and fifo enable */
tmp = cx_read(sram_ch->dma_ctl);
cx_write(sram_ch->dma_ctl, tmp & ~(FLD_VID_FIFO_EN | FLD_VID_RISC_EN));
free_irq(dev->pci->irq, chan);
/* Clear data buffer memory */
if (out->_data_buf_virt_addr)
memset(out->_data_buf_virt_addr, 0, out->_data_buf_size);
out->_is_running = 0;
out->_is_first_frame = 0;
out->_frame_count = 0;
out->_file_status = END_OF_FILE;
tmp = cx_read(VID_CH_MODE_SEL);
cx_write(VID_CH_MODE_SEL, tmp & 0xFFFFFE00);
}
static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
{
struct dvb_frontend *fe;
struct videobuf_dvb_frontend *fe0 = NULL;
struct xc2028_ctrl ctl;
struct xc2028_config cfg = {
.i2c_adap = &dev->core->i2c_adap,
.i2c_addr = addr,
.ctrl = &ctl,
};
/* Get the first frontend */
fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
if (!fe0)
return -EINVAL;
if (!fe0->dvb.frontend) {
printk(KERN_ERR "%s/2: dvb frontend not attached. "
"Can't attach xc3028\n",
dev->core->name);
return -EINVAL;
}
/*
* Some xc3028 devices may be hidden by an I2C gate. This is known
* to happen with some s5h1409-based devices.
* Now that I2C gate is open, sets up xc3028 configuration
*/
cx88_setup_xc3028(dev->core, &ctl);
fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
if (!fe) {
printk(KERN_ERR "%s/2: xc3028 attach failed\n",
dev->core->name);
dvb_frontend_detach(fe0->dvb.frontend);
dvb_unregister_frontend(fe0->dvb.frontend);
fe0->dvb.frontend = NULL;
return -EINVAL;
}
printk(KERN_INFO "%s/2: xc3028 attached\n",
dev->core->name);
return 0;
}
static int cx24116_set_ts_param(struct dvb_frontend *fe,
int is_punctured)
{
struct cx8802_dev *dev = fe->dvb->priv;
dev->ts_gen_cntrl = 0x2;
return 0;
}
static int cx24116_reset_device(struct dvb_frontend *fe)
{
struct cx8802_dev *dev = fe->dvb->priv;
struct cx88_core *core = dev->core;
/* Reset the part */
/* Put the cx24116 into reset */
cx_write(MO_SRST_IO, 0);
msleep(10);
/* Take the cx24116 out of reset */
cx_write(MO_SRST_IO, 1);
msleep(10);
return 0;
}
static struct cx24116_config hauppauge_hvr4000_config = {
.demod_address = 0x05,
.set_ts_params = cx24116_set_ts_param,
.reset_device = cx24116_reset_device,
};
static struct cx24116_config tevii_s460_config = {
.demod_address = 0x55,
.set_ts_params = cx24116_set_ts_param,
.reset_device = cx24116_reset_device,
};
static struct stv0299_config tevii_tuner_sharp_config = {
.demod_address = 0x68,
.inittab = sharp_z0194a_inittab,
.mclk = 88000000UL,
.invert = 1,
.skip_reinit = 0,
.lock_output = 1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
.min_delay_ms = 100,
.set_symbol_rate = sharp_z0194a_set_symbol_rate,
.set_ts_params = cx24116_set_ts_param,
};
static struct stv0288_config tevii_tuner_earda_config = {
.demod_address = 0x68,
.min_delay_ms = 100,
.set_ts_params = cx24116_set_ts_param,
};
static int cx8802_alloc_frontends(struct cx8802_dev *dev)
{
struct cx88_core *core = dev->core;
struct videobuf_dvb_frontend *fe = NULL;
int i;
mutex_init(&dev->frontends.lock);
INIT_LIST_HEAD(&dev->frontends.felist);
if (!core->board.num_frontends)
return -ENODEV;
printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
core->board.num_frontends);
for (i = 1; i <= core->board.num_frontends; i++) {
fe = videobuf_dvb_alloc_frontend(&dev->frontends, i);
if (!fe) {
printk(KERN_ERR "%s() failed to alloc\n", __func__);
videobuf_dvb_dealloc_frontends(&dev->frontends);
return -ENOMEM;
}
}
return 0;
}
static int dvb_register(struct cx8802_dev *dev)
{
struct cx88_core *core = dev->core;
struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
int mfe_shared = 0; /* bus not shared by default */
if (0 != core->i2c_rc) {
printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name);
goto frontend_detach;
}
/* Get the first frontend */
fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
if (!fe0)
goto frontend_detach;
/* multi-frontend gate control is undefined or defaults to fe0 */
dev->frontends.gate = 0;
/* Sets the gate control callback to be used by i2c command calls */
core->gate_ctrl = cx88_dvb_gate_ctrl;
/* init frontend(s) */
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_DVB_T1:
fe0->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x61, &core->i2c_adap,
DVB_PLL_THOMSON_DTT759X))
goto frontend_detach;
}
break;
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
case CX88_BOARD_CONEXANT_DVB_T1:
case CX88_BOARD_KWORLD_DVB_T_CX22702:
case CX88_BOARD_WINFAST_DTV1000:
fe0->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x60, &core->i2c_adap,
DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
}
break;
case CX88_BOARD_WINFAST_DTV2000H:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1100LP:
case CX88_BOARD_HAUPPAUGE_HVR1300:
fe0->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_PHILIPS_FMD1216ME_MK3))
goto frontend_detach;
}
break;
case CX88_BOARD_HAUPPAUGE_HVR3000:
/* MFE frontend 1 */
mfe_shared = 1;
dev->frontends.gate = 2;
/* DVB-S init */
fe0->dvb.frontend = dvb_attach(cx24123_attach,
&hauppauge_novas_config,
&dev->core->i2c_adap);
if (fe0->dvb.frontend) {
if (!dvb_attach(isl6421_attach,
fe0->dvb.frontend,
&dev->core->i2c_adap,
0x08, ISL6421_DCL, 0x00))
goto frontend_detach;
}
/* MFE frontend 2 */
fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2);
if (!fe1)
goto frontend_detach;
/* DVB-T init */
fe1->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
&dev->core->i2c_adap);
if (fe1->dvb.frontend) {
fe1->dvb.frontend->id = 1;
if (!dvb_attach(simple_tuner_attach,
fe1->dvb.frontend,
&dev->core->i2c_adap,
0x61, TUNER_PHILIPS_FMD1216ME_MK3))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
fe0->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x60, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
break;
}
/* ZL10353 replaces MT352 on later cards */
fe0->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x60, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
/* The tin box says DEE1601, but it seems to be DTT7579
* compatible, with a slightly different MT352 AGC gain. */
fe0->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv_dual,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x61, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
break;
}
/* ZL10353 replaces MT352 on later cards */
fe0->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x61, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
fe0->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x61, NULL, DVB_PLL_LG_Z201))
goto frontend_detach;
}
break;
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_ADSTECH_DVB_T_PCI:
fe0->dvb.frontend = dvb_attach(mt352_attach,
&dntv_live_dvbt_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x61, NULL, DVB_PLL_UNKNOWN_1))
goto frontend_detach;
}
break;
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
#if defined(CONFIG_VIDEO_CX88_VP3054) || (defined(CONFIG_VIDEO_CX88_VP3054_MODULE) && defined(MODULE))
/* MT352 is on a secondary I2C bus made from some GPIO lines */
fe0->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
&dev->vp3054->adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_PHILIPS_FMD1216ME_MK3))
goto frontend_detach;
}
#else
printk(KERN_ERR "%s/2: built without vp3054 support\n",
core->name);
#endif
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
fe0->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_hybrid,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_THOMSON_FE6600))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
fe0->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_xc3028,
&core->i2c_adap);
if (fe0->dvb.frontend == NULL)
fe0->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv_mt352_xc3028,
&core->i2c_adap);
/*
* On this board, the demod provides the I2C bus pullup.
* We must not permit gate_ctrl to be performed, or
* the xc3028 cannot communicate on the bus.
*/
if (fe0->dvb.frontend)
fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
if (attach_xc3028(0x61, dev) < 0)
goto frontend_detach;
break;
case CX88_BOARD_PCHDTV_HD3000:
fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_THOMSON_DTT761X))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
dev->ts_gen_cntrl = 0x08;
/* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
/* Select RF connector callback */
fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_MICROTUNE_4042FI5))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
dev->ts_gen_cntrl = 0x08;
/* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 9);
mdelay(200);
fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_THOMSON_DTT761X))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
dev->ts_gen_cntrl = 0x08;
/* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_5_gold,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_LG_TDVS_H06XF))
goto frontend_detach;
if (!dvb_attach(tda9887_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x43))
goto frontend_detach;
}
break;
case CX88_BOARD_PCHDTV_HD5500:
dev->ts_gen_cntrl = 0x08;
/* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
&pchdtv_hd5500,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_LG_TDVS_H06XF))
goto frontend_detach;
if (!dvb_attach(tda9887_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x43))
goto frontend_detach;
}
break;
case CX88_BOARD_ATI_HDTVWONDER:
fe0->dvb.frontend = dvb_attach(nxt200x_attach,
&ati_hdtvwonder,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_PHILIPS_TUV1236D))
goto frontend_detach;
}
break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
fe0->dvb.frontend = dvb_attach(cx24123_attach,
&hauppauge_novas_config,
&core->i2c_adap);
if (fe0->dvb.frontend) {
if (!dvb_attach(isl6421_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x08, ISL6421_DCL, 0x00))
goto frontend_detach;
}
break;
case CX88_BOARD_KWORLD_DVBS_100:
fe0->dvb.frontend = dvb_attach(cx24123_attach,
&kworld_dvbs_100_config,
&core->i2c_adap);
if (fe0->dvb.frontend) {
core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
fe0->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
}
break;
case CX88_BOARD_GENIATECH_DVBS:
fe0->dvb.frontend = dvb_attach(cx24123_attach,
&geniatech_dvbs_config,
&core->i2c_adap);
if (fe0->dvb.frontend) {
core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
fe0->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
}
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&pinnacle_pctv_hd_800i_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
&core->i2c_adap,
&pinnacle_pctv_hd_800i_tuner_config))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&dvico_hdtv5_pci_nano_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &core->i2c_adap,
.i2c_addr = 0x61,
};
static struct xc2028_ctrl ctl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
.scode_table = XC3028_FE_OREN538,
};
fe = dvb_attach(xc2028_attach,
fe0->dvb.frontend, &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
case CX88_BOARD_PINNACLE_HYBRID_PCTV:
fe0->dvb.frontend = dvb_attach(zl10353_attach,
&cx88_pinnacle_hybrid_pctv,
&core->i2c_adap);
if (fe0->dvb.frontend) {
fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
if (attach_xc3028(0x61, dev) < 0)
goto frontend_detach;
}
break;
case CX88_BOARD_GENIATECH_X8000_MT:
dev->ts_gen_cntrl = 0x00;
fe0->dvb.frontend = dvb_attach(zl10353_attach,
&cx88_geniatech_x8000_mt,
&core->i2c_adap);
if (attach_xc3028(0x61, dev) < 0)
goto frontend_detach;
break;
case CX88_BOARD_KWORLD_ATSC_120:
fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&kworld_atsc_120_config,
&core->i2c_adap);
if (attach_xc3028(0x61, dev) < 0)
goto frontend_detach;
break;
case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
&dvico_fusionhdtv7_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
&core->i2c_adap,
&dvico_fusionhdtv7_tuner_config))
goto frontend_detach;
}
break;
case CX88_BOARD_HAUPPAUGE_HVR4000:
/* MFE frontend 1 */
mfe_shared = 1;
dev->frontends.gate = 2;
/* DVB-S/S2 Init */
fe0->dvb.frontend = dvb_attach(cx24116_attach,
&hauppauge_hvr4000_config,
&dev->core->i2c_adap);
if (fe0->dvb.frontend) {
if (!dvb_attach(isl6421_attach,
fe0->dvb.frontend,
&dev->core->i2c_adap,
0x08, ISL6421_DCL, 0x00))
goto frontend_detach;
}
/* MFE frontend 2 */
fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2);
if (!fe1)
goto frontend_detach;
/* DVB-T Init */
fe1->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
&dev->core->i2c_adap);
if (fe1->dvb.frontend) {
fe1->dvb.frontend->id = 1;
if (!dvb_attach(simple_tuner_attach,
fe1->dvb.frontend,
&dev->core->i2c_adap,
0x61, TUNER_PHILIPS_FMD1216ME_MK3))
goto frontend_detach;
}
break;
case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
fe0->dvb.frontend = dvb_attach(cx24116_attach,
&hauppauge_hvr4000_config,
&dev->core->i2c_adap);
if (fe0->dvb.frontend) {
if (!dvb_attach(isl6421_attach,
fe0->dvb.frontend,
&dev->core->i2c_adap,
0x08, ISL6421_DCL, 0x00))
goto frontend_detach;
}
break;
case CX88_BOARD_PROF_6200:
case CX88_BOARD_TBS_8910:
case CX88_BOARD_TEVII_S420:
fe0->dvb.frontend = dvb_attach(stv0299_attach,
&tevii_tuner_sharp_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
&core->i2c_adap, DVB_PLL_OPERA1))
goto frontend_detach;
core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
} else {
fe0->dvb.frontend = dvb_attach(stv0288_attach,
&tevii_tuner_earda_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(stb6000_attach, fe0->dvb.frontend, 0x61,
&core->i2c_adap))
goto frontend_detach;
core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
}
}
break;
case CX88_BOARD_TEVII_S460:
fe0->dvb.frontend = dvb_attach(cx24116_attach,
&tevii_s460_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL)
fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
break;
case CX88_BOARD_OMICOM_SS4_PCI:
case CX88_BOARD_TBS_8920:
case CX88_BOARD_PROF_7300:
case CX88_BOARD_SATTRADE_ST4200:
fe0->dvb.frontend = dvb_attach(cx24116_attach,
&hauppauge_hvr4000_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL)
fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
break;
case CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII:
fe0->dvb.frontend = dvb_attach(zl10353_attach,
&cx88_terratec_cinergy_ht_pci_mkii_config,
&core->i2c_adap);
if (fe0->dvb.frontend) {
fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
if (attach_xc3028(0x61, dev) < 0)
goto frontend_detach;
}
break;
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
core->name);
break;
}
if ( (NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend) ) {
printk(KERN_ERR
"%s/2: frontend initialization failed\n",
core->name);
goto frontend_detach;
}
/* define general-purpose callback pointer */
fe0->dvb.frontend->callback = cx88_tuner_callback;
/* Ensure all frontends negotiate bus access */
fe0->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
if (fe1)
fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
/* Put the analog decoder in standby to keep it quiet */
call_all(core, tuner, s_standby);
/* register everything */
return videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
&dev->pci->dev, adapter_nr, mfe_shared);
frontend_detach:
core->gate_ctrl = NULL;
videobuf_dvb_dealloc_frontends(&dev->frontends);
return -EINVAL;
}
/* ----------------------------------------------------------- */
/* CX8802 MPEG -> mini driver - We have been given the hardware */
static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
int err = 0;
dprintk( 1, "%s\n", __func__);
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* We arrive here with either the cx23416 or the cx22702
* on the bus. Take the bus from the cx23416 and enable the
* cx22702 demod
*/
/* Toggle reset on cx22702 leaving i2c active */
cx_set(MO_GP0_IO, 0x00000080);
udelay(1000);
cx_clear(MO_GP0_IO, 0x00000080);
udelay(50);
cx_set(MO_GP0_IO, 0x00000080);
udelay(1000);
/* enable the cx22702 pins */
cx_clear(MO_GP0_IO, 0x00000004);
udelay(1000);
break;
case CX88_BOARD_HAUPPAUGE_HVR3000:
case CX88_BOARD_HAUPPAUGE_HVR4000:
/* Toggle reset on cx22702 leaving i2c active */
cx_set(MO_GP0_IO, 0x00000080);
udelay(1000);
cx_clear(MO_GP0_IO, 0x00000080);
udelay(50);
cx_set(MO_GP0_IO, 0x00000080);
udelay(1000);
switch (core->dvbdev->frontends.active_fe_id) {
case 1: /* DVB-S/S2 Enabled */
/* tri-state the cx22702 pins */
cx_set(MO_GP0_IO, 0x00000004);
/* Take the cx24116/cx24123 out of reset */
cx_write(MO_SRST_IO, 1);
core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */
break;
case 2: /* DVB-T Enabled */
/* Put the cx24116/cx24123 into reset */
cx_write(MO_SRST_IO, 0);
/* enable the cx22702 pins */
cx_clear(MO_GP0_IO, 0x00000004);
core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */
break;
}
udelay(1000);
break;
default:
err = -ENODEV;
}
return err;
}
/* CX8802 MPEG -> mini driver - We no longer have the hardware */
static int cx8802_dvb_advise_release(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
int err = 0;
dprintk( 1, "%s\n", __func__);
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Do Nothing, leave the cx22702 on the bus. */
break;
case CX88_BOARD_HAUPPAUGE_HVR3000:
case CX88_BOARD_HAUPPAUGE_HVR4000:
break;
default:
err = -ENODEV;
}
return err;
}
static int cx8802_dvb_probe(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
struct cx8802_dev *dev = drv->core->dvbdev;
int err;
struct videobuf_dvb_frontend *fe;
int i;
dprintk( 1, "%s\n", __func__);
dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
core->boardnr,
core->name,
core->pci_bus,
core->pci_slot);
err = -ENODEV;
if (!(core->board.mpeg & CX88_MPEG_DVB))
goto fail_core;
/* If vp3054 isn't enabled, a stub will just return 0 */
err = vp3054_i2c_probe(dev);
if (0 != err)
goto fail_core;
/* dvb stuff */
printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
dev->ts_gen_cntrl = 0x0c;
err = cx8802_alloc_frontends(dev);
if (err)
goto fail_core;
err = -ENODEV;
for (i = 1; i <= core->board.num_frontends; i++) {
fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i);
if (fe == NULL) {
printk(KERN_ERR "%s() failed to get frontend(%d)\n",
__func__, i);
goto fail_probe;
}
videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops,
&dev->pci->dev, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
sizeof(struct cx88_buffer),
dev);
/* init struct videobuf_dvb */
fe->dvb.name = dev->core->name;
}
err = dvb_register(dev);
if (err)
/* frontends/adapter de-allocated in dvb_register */
printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n",
core->name, err);
return err;
fail_probe:
videobuf_dvb_dealloc_frontends(&core->dvbdev->frontends);
fail_core:
return err;
}
static int cx8802_dvb_remove(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
struct cx8802_dev *dev = drv->core->dvbdev;
dprintk( 1, "%s\n", __func__);
videobuf_dvb_unregister_bus(&dev->frontends);
vp3054_i2c_remove(dev);
core->gate_ctrl = NULL;
return 0;
}
static struct cx8802_driver cx8802_dvb_driver = {
.type_id = CX88_MPEG_DVB,
.hw_access = CX8802_DRVCTL_SHARED,
.probe = cx8802_dvb_probe,
.remove = cx8802_dvb_remove,
.advise_acquire = cx8802_dvb_advise_acquire,
.advise_release = cx8802_dvb_advise_release,
};
static int dvb_init(void)
{
printk(KERN_INFO "cx88/2: cx2388x dvb driver version %d.%d.%d loaded\n",
(CX88_VERSION_CODE >> 16) & 0xff,
(CX88_VERSION_CODE >> 8) & 0xff,
CX88_VERSION_CODE & 0xff);
#ifdef SNAPSHOT
printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
#endif
return cx8802_register_driver(&cx8802_dvb_driver);
}
static void dvb_fini(void)
{
cx8802_unregister_driver(&cx8802_dvb_driver);
}
module_init(dvb_init);
module_exit(dvb_fini);
static int philips_fmd1216_pll_init(struct dvb_frontend *fe)
{
struct cx8802_dev *dev= fe->dvb->priv;
/* this message is to set up ATC and ALC */
static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
struct i2c_msg msg =
{ .addr = dev->core->pll_addr, .flags = 0,
.buf = fmd1216_init, .len = sizeof(fmd1216_init) };
int err;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
if (err < 0)
return err;
else
return -EREMOTEIO;
}
return 0;
}
static int dntv_live_dvbt_pro_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
struct cx8802_dev *dev= fe->dvb->priv;
u8 buf[4];
struct i2c_msg msg =
{ .addr = dev->core->pll_addr, .flags = 0,
.buf = buf, .len = 4 };
int err;
/* Switch PLL to DVB mode */
err = philips_fmd1216_pll_init(fe);
if (err)
return err;
/* Tune PLL */
dvb_pll_configure(dev->core->pll_desc, buf,
params->frequency,
params->u.ofdm.bandwidth);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
printk(KERN_WARNING "cx88-dvb: %s error "
"(addr %02x <- %02x, err = %i)\n",
__FUNCTION__, dev->core->pll_addr, buf[0], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
return 0;
}
static struct mt352_config dntv_live_dvbt_pro_config = {
.demod_address = 0x0f,
.no_tuner = 1,
.demod_init = dntv_live_dvbt_pro_demod_init,
};
#endif
static struct zl10353_config dvico_fusionhdtv_hybrid = {
.demod_address = 0x0f,
.no_tuner = 1,
};
static struct zl10353_config dvico_fusionhdtv_plus_v1_1 = {
.demod_address = 0x0f,
};
static struct cx22702_config connexant_refboard_config = {
.demod_address = 0x43,
.output_mode = CX22702_SERIAL_OUTPUT,
};
static struct cx22702_config hauppauge_hvr_config = {
.demod_address = 0x63,
.output_mode = CX22702_SERIAL_OUTPUT,
};
static int or51132_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
return 0;
}
static struct or51132_config pchdtv_hd3000 = {
.demod_address = 0x15,
.set_ts_params = or51132_set_ts_param,
};
static int lgdt330x_pll_rf_set(struct dvb_frontend* fe, int index)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
dprintk(1, "%s: index = %d\n", __FUNCTION__, index);
if (index == 0)
cx_clear(MO_GP0_IO, 8);
else
cx_set(MO_GP0_IO, 8);
return 0;
}
static int lgdt330x_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
if (is_punctured)
dev->ts_gen_cntrl |= 0x04;
else
dev->ts_gen_cntrl &= ~0x04;
return 0;
}
static struct lgdt330x_config fusionhdtv_3_gold = {
.demod_address = 0x0e,
.demod_chip = LGDT3302,
.serial_mpeg = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */
.set_ts_params = lgdt330x_set_ts_param,
};
static struct lgdt330x_config fusionhdtv_5_gold = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
.set_ts_params = lgdt330x_set_ts_param,
};
static struct lgdt330x_config pchdtv_hd5500 = {
.demod_address = 0x59,
.demod_chip = LGDT3303,
.serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
.set_ts_params = lgdt330x_set_ts_param,
};
static int nxt200x_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
return 0;
}
static int nxt200x_set_pll_input(u8* buf, int input)
{
if (input)
buf[3] |= 0x08;
else
buf[3] &= ~0x08;
return 0;
}
static struct nxt200x_config ati_hdtvwonder = {
.demod_address = 0x0a,
.set_pll_input = nxt200x_set_pll_input,
.set_ts_params = nxt200x_set_ts_param,
};
static int cx24123_set_ts_param(struct dvb_frontend* fe,
int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
dev->ts_gen_cntrl = 0x02;
return 0;
}
static int kworld_dvbs_100_set_voltage(struct dvb_frontend* fe,
fe_sec_voltage_t voltage)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
if (voltage == SEC_VOLTAGE_OFF)
cx_write(MO_GP0_IO, 0x000006fb);
else
cx_write(MO_GP0_IO, 0x000006f9);
if (core->prev_set_voltage)
return core->prev_set_voltage(fe, voltage);
return 0;
}
static int geniatech_dvbs_set_voltage(struct dvb_frontend *fe,
fe_sec_voltage_t voltage)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
if (voltage == SEC_VOLTAGE_OFF) {
dprintk(1,"LNB Voltage OFF\n");
cx_write(MO_GP0_IO, 0x0000efff);
}
if (core->prev_set_voltage)
return core->prev_set_voltage(fe, voltage);
return 0;
}
static struct cx24123_config geniatech_dvbs_config = {
.demod_address = 0x55,
.set_ts_params = cx24123_set_ts_param,
};
static struct cx24123_config hauppauge_novas_config = {
.demod_address = 0x55,
.set_ts_params = cx24123_set_ts_param,
};
static struct cx24123_config kworld_dvbs_100_config = {
.demod_address = 0x15,
.set_ts_params = cx24123_set_ts_param,
.lnb_polarity = 1,
};
static int dvb_register(struct cx8802_dev *dev)
{
/* init struct videobuf_dvb */
dev->dvb.name = dev->core->name;
dev->ts_gen_cntrl = 0x0c;
/* init frontend */
switch (dev->core->board) {
case CX88_BOARD_HAUPPAUGE_DVB_T1:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_thomson_dtt759x);
}
break;
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
case CX88_BOARD_CONEXANT_DVB_T1:
case CX88_BOARD_KWORLD_DVB_T_CX22702:
case CX88_BOARD_WINFAST_DTV1000:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
&dev->core->i2c_adap,
&dvb_pll_thomson_dtt7579);
}
break;
case CX88_BOARD_WINFAST_DTV2000H:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1100LP:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap, &dvb_pll_fmd1216me);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
NULL, &dvb_pll_thomson_dtt7579);
break;
}
/* ZL10353 replaces MT352 on later cards */
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
NULL, &dvb_pll_thomson_dtt7579);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
/* The tin box says DEE1601, but it seems to be DTT7579
* compatible, with a slightly different MT352 AGC gain. */
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv_dual,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, &dvb_pll_thomson_dtt7579);
break;
}
/* ZL10353 replaces MT352 on later cards */
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, &dvb_pll_thomson_dtt7579);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, &dvb_pll_lg_z201);
}
break;
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_ADSTECH_DVB_T_PCI:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dntv_live_dvbt_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, &dvb_pll_unknown_1);
}
break;
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
#if defined(CONFIG_VIDEO_CX88_VP3054) || defined(CONFIG_VIDEO_CX88_VP3054_MODULE)
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_fmd1216me;
dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
&((struct vp3054_i2c_state *)dev->card_priv)->adap);
if (dev->dvb.frontend != NULL) {
dev->dvb.frontend->ops.tuner_ops.set_params = dntv_live_dvbt_pro_tuner_set_params;
}
#else
printk("%s: built without vp3054 support\n", dev->core->name);
#endif
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_hybrid,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_thomson_fe6600);
}
break;
case CX88_BOARD_PCHDTV_HD3000:
dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_thomson_dtt761x);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
/* Select RF connector callback */
fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_microtune_4042);
}
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 9);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_thomson_dtt761x);
}
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_5_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(lgh06xf_attach, dev->dvb.frontend,
&dev->core->i2c_adap);
}
}
break;
case CX88_BOARD_PCHDTV_HD5500:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&pchdtv_hd5500,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(lgh06xf_attach, dev->dvb.frontend,
&dev->core->i2c_adap);
}
}
break;
case CX88_BOARD_ATI_HDTVWONDER:
dev->dvb.frontend = dvb_attach(nxt200x_attach,
&ati_hdtvwonder,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, &dvb_pll_tuv1236d);
}
break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&hauppauge_novas_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend) {
dvb_attach(isl6421_attach, dev->dvb.frontend,
&dev->core->i2c_adap, 0x08, 0x00, 0x00);
}
break;
case CX88_BOARD_KWORLD_DVBS_100:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&kworld_dvbs_100_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend) {
dev->core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
dev->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
}
break;
case CX88_BOARD_GENIATECH_DVBS:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&geniatech_dvbs_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend) {
dev->core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
}
break;
case CX88_BOARD_HAUPPAUGE_HVR1300:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap, &dvb_pll_fmd1216me);
}
break;
case CX88_BOARD_HAUPPAUGE_HVR3000:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap, &dvb_pll_fmd1216me);
}
break;
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->core->name);
break;
}
if (NULL == dev->dvb.frontend) {
printk("%s: frontend initialization failed\n",dev->core->name);
return -1;
}
if (dev->core->pll_desc) {
dev->dvb.frontend->ops.info.frequency_min = dev->core->pll_desc->min;
dev->dvb.frontend->ops.info.frequency_max = dev->core->pll_desc->max;
}
/* Ensure all frontends negotiate bus access */
dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
/* Put the analog decoder in standby to keep it quiet */
cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
/* register everything */
return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev);
}
/* ----------------------------------------------------------- */
/* CX8802 MPEG -> mini driver - We have been given the hardware */
static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
int err = 0;
dprintk( 1, "%s\n", __FUNCTION__);
switch (core->board) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* We arrive here with either the cx23416 or the cx22702
* on the bus. Take the bus from the cx23416 and enable the
* cx22702 demod
*/
cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset and enable */
cx_clear(MO_GP0_IO, 0x00000004);
udelay(1000);
break;
default:
err = -ENODEV;
}
return err;
}
/* CX8802 MPEG -> mini driver - We no longer have the hardware */
static int cx8802_dvb_advise_release(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
int err = 0;
dprintk( 1, "%s\n", __FUNCTION__);
switch (core->board) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Do Nothing, leave the cx22702 on the bus. */
break;
default:
err = -ENODEV;
}
return err;
}
static int cx8802_dvb_probe(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
struct cx8802_dev *dev = drv->core->dvbdev;
int err;
dprintk( 1, "%s\n", __FUNCTION__);
dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
core->board,
core->name,
core->pci_bus,
core->pci_slot);
err = -ENODEV;
if (!(cx88_boards[core->board].mpeg & CX88_MPEG_DVB))
goto fail_core;
#if defined(CONFIG_VIDEO_CX88_VP3054) || defined(CONFIG_VIDEO_CX88_VP3054_MODULE)
err = vp3054_i2c_probe(dev);
if (0 != err)
goto fail_core;
#endif
/* dvb stuff */
printk("%s/2: cx2388x based dvb card\n", core->name);
videobuf_queue_init(&dev->dvb.dvbq, &dvb_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
sizeof(struct cx88_buffer),
dev);
err = dvb_register(dev);
if (err != 0)
printk("%s dvb_register failed err = %d\n", __FUNCTION__, err);
fail_core:
return err;
}
static int cx8802_dvb_remove(struct cx8802_driver *drv)
{
struct cx8802_dev *dev = drv->core->dvbdev;
/* dvb */
videobuf_dvb_unregister(&dev->dvb);
#if defined(CONFIG_VIDEO_CX88_VP3054) || defined(CONFIG_VIDEO_CX88_VP3054_MODULE)
vp3054_i2c_remove(dev);
#endif
return 0;
}
static struct cx8802_driver cx8802_dvb_driver = {
.type_id = CX88_MPEG_DVB,
.hw_access = CX8802_DRVCTL_SHARED,
.probe = cx8802_dvb_probe,
.remove = cx8802_dvb_remove,
.advise_acquire = cx8802_dvb_advise_acquire,
.advise_release = cx8802_dvb_advise_release,
};
static int dvb_init(void)
{
printk(KERN_INFO "cx2388x dvb driver version %d.%d.%d loaded\n",
(CX88_VERSION_CODE >> 16) & 0xff,
(CX88_VERSION_CODE >> 8) & 0xff,
CX88_VERSION_CODE & 0xff);
#ifdef SNAPSHOT
printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
#endif
return cx8802_register_driver(&cx8802_dvb_driver);
}
static void dvb_fini(void)
{
cx8802_unregister_driver(&cx8802_dvb_driver);
}
module_init(dvb_init);
module_exit(dvb_fini);
/* Handle incoming HTTP events */
static int web_handler(struct mg_connection *conn, enum mg_event ev) {
int result = MG_TRUE;
switch (ev) {
case MG_AUTH:
break;
/* New websocket connection */
case MG_WS_CONNECT: {
cx_id id;
web_server s = conn->server_param;
sprintf(id, "C%d", s->connectionId);
/* Create connection object */
web_wsconnection wc = web_wsconnection__declare(s, id);
s->connectionId++;
wc->conn = (cx_word)conn;
web_wsconnection__define(wc, NULL, conn->remote_ip, conn->remote_port);
/* Set dispatcher for trigger */
cx_observer_setDispatcher(web_wsconnection_onUpdate_o, (cx_dispatcher)s);
cx_observer_setDispatcher(web_wsconnection_onDelete_o, (cx_dispatcher)s);
conn->connection_param = wc;
break;
}
/* Close websocket connection */
case MG_CLOSE:
if (conn->connection_param) {
web_wsconnection wc = conn->connection_param;
if (wc->observing) {
/* Remove connection from observer queue */
cx_silence(wc->observing, web_wsconnection_onUpdate_o, wc);
cx_silence(wc->observing, web_wsconnection_onDelete_o, wc);
/* Set observing to NULL */
cx_set(&wc->observing, NULL);
}
/* Set connection parameter to NULL since pointer
* will be invalid after this callback */
wc->conn = 0;
cx_destruct(wc);
conn->connection_param = NULL;
}
break;
/* HTTP request */
case MG_REQUEST:
/* If request is a websocket, forward to websocket handler */
if (conn->is_websocket) {
if (conn->content_len) {
result = web_socketHandler(conn);
}
} else {
/* If the URI is prefixed with a '_' an object is requested */
if (!memcmp(conn->uri, "/_", 2)) {
result = web_serveObject(conn);
/* If the URI contains a '.' before a '?' a file is requested */
} else if (strchr (conn->uri, '.')) {
result = web_serveFile(conn, conn->uri + 1);
/* If none of the above, serve index.html. Since the client
* is a single page app, the URI can contain a path to the
* object currently displayed. This URI is not relevant for
* the server. However, when such a URI is requested, the
* index.html file must be served. */
} else {
result = web_serveFile(conn, "index.html");
}
}
break;
case MG_HTTP_ERROR:
result = FALSE;
break;
case MG_POLL:
result = FALSE;
break;
default:
result = MG_FALSE;
break;
}
return result;
}
