/*
* We find out if we support MSI during this, and the register layout
* depends on the MSI (doh). Don't acces the device specific bits in
* BAR 0 before calling it!
*/
int
virtio_register_ints(struct virtio_softc *sc,
struct virtio_int_handler *config_handler,
struct virtio_int_handler vq_handlers[])
{
int ret;
int intr_types;
/* Default offset until MSI-X is enabled, if ever. */
sc->sc_config_offset = VIRTIO_CONFIG_DEVICE_CONFIG_NOMSIX;
/* Determine which types of interrupts are supported */
ret = ddi_intr_get_supported_types(sc->sc_dev, &intr_types);
if (ret != DDI_SUCCESS) {
dev_err(sc->sc_dev, CE_WARN, "Can't get supported int types");
goto out_inttype;
}
/* If we have msi, let's use them. */
if (intr_types & (DDI_INTR_TYPE_MSIX | DDI_INTR_TYPE_MSI)) {
ret = virtio_register_msi(sc, config_handler,
vq_handlers, intr_types);
if (!ret)
return (0);
}
/* Fall back to old-fashioned interrupts. */
if (intr_types & DDI_INTR_TYPE_FIXED) {
dev_debug(sc->sc_dev, CE_WARN,
"Using legacy interrupts");
return (virtio_register_intx(sc, config_handler, vq_handlers));
}
dev_err(sc->sc_dev, CE_WARN,
"MSI failed and fixed interrupts not supported. Giving up.");
ret = DDI_FAILURE;
out_inttype:
return (ret);
}
static int
virtionet_intr_setup(virtionet_state_t *sp)
{
int rc;
int itypes;
rc = ddi_intr_get_supported_types(sp->dip, &itypes);
if (rc != DDI_SUCCESS) {
return (DDI_FAILURE);
}
if (itypes & DDI_INTR_TYPE_MSIX) {
cmn_err(CE_NOTE, "Detected MSIX interrupt support");
}
if (itypes & DDI_INTR_TYPE_MSI) {
cmn_err(CE_NOTE, "Detected MSI interrupt support");
}
if (itypes & DDI_INTR_TYPE_FIXED) {
cmn_err(CE_NOTE, "Detected FIXED interrupt support");
}
rc = virtio_fixed_intr_setup(sp, virtionet_intr);
return (DDI_SUCCESS);
}
/*
* Autoconfiguration entry points.
*/
int
efe_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
{
ddi_acc_handle_t pci;
int types;
int count;
int actual;
uint_t pri;
efe_t *efep;
mac_register_t *macp;
switch (cmd) {
case DDI_ATTACH:
break;
case DDI_RESUME:
efep = ddi_get_driver_private(dip);
return (efe_resume(efep));
default:
return (DDI_FAILURE);
}
/*
* PCI configuration.
*/
if (pci_config_setup(dip, &pci) != DDI_SUCCESS) {
efe_error(dip, "unable to setup PCI configuration!");
return (DDI_FAILURE);
}
pci_config_put16(pci, PCI_CONF_COMM,
pci_config_get16(pci, PCI_CONF_COMM) | PCI_COMM_MAE | PCI_COMM_ME);
pci_config_teardown(&pci);
if (ddi_intr_get_supported_types(dip, &types)
!= DDI_SUCCESS || !(types & DDI_INTR_TYPE_FIXED)) {
efe_error(dip, "fixed interrupts not supported!");
return (DDI_FAILURE);
}
if (ddi_intr_get_nintrs(dip, DDI_INTR_TYPE_FIXED, &count)
!= DDI_SUCCESS || count != 1) {
efe_error(dip, "no fixed interrupts available!");
return (DDI_FAILURE);
}
/*
* Initialize soft state.
*/
efep = kmem_zalloc(sizeof (efe_t), KM_SLEEP);
ddi_set_driver_private(dip, efep);
efep->efe_dip = dip;
if (ddi_regs_map_setup(dip, 1, (caddr_t *)&efep->efe_regs, 0, 0,
&efe_regs_acc_attr, &efep->efe_regs_acch) != DDI_SUCCESS) {
efe_error(dip, "unable to setup register mapping!");
goto failure;
}
efep->efe_rx_ring = efe_ring_alloc(efep->efe_dip, RXDESCL);
if (efep->efe_rx_ring == NULL) {
efe_error(efep->efe_dip, "unable to allocate rx ring!");
goto failure;
}
efep->efe_tx_ring = efe_ring_alloc(efep->efe_dip, TXDESCL);
if (efep->efe_tx_ring == NULL) {
efe_error(efep->efe_dip, "unable to allocate tx ring!");
goto failure;
}
if (ddi_intr_alloc(dip, &efep->efe_intrh, DDI_INTR_TYPE_FIXED, 0,
count, &actual, DDI_INTR_ALLOC_STRICT) != DDI_SUCCESS ||
actual != count) {
efe_error(dip, "unable to allocate fixed interrupt!");
goto failure;
}
if (ddi_intr_get_pri(efep->efe_intrh, &pri) != DDI_SUCCESS ||
pri >= ddi_intr_get_hilevel_pri()) {
efe_error(dip, "unable to get valid interrupt priority!");
goto failure;
}
mutex_init(&efep->efe_intrlock, NULL, MUTEX_DRIVER,
DDI_INTR_PRI(pri));
mutex_init(&efep->efe_txlock, NULL, MUTEX_DRIVER,
DDI_INTR_PRI(pri));
/*
* Initialize device.
*/
mutex_enter(&efep->efe_intrlock);
mutex_enter(&efep->efe_txlock);
efe_reset(efep);
mutex_exit(&efep->efe_txlock);
mutex_exit(&efep->efe_intrlock);
/* Use factory address as default */
efe_getaddr(efep, efep->efe_macaddr);
/*
* Enable the ISR.
*/
if (ddi_intr_add_handler(efep->efe_intrh, efe_intr, efep, NULL)
!= DDI_SUCCESS) {
efe_error(dip, "unable to add interrupt handler!");
goto failure;
}
if (ddi_intr_enable(efep->efe_intrh) != DDI_SUCCESS) {
efe_error(dip, "unable to enable interrupt!");
goto failure;
}
/*
* Allocate MII resources.
*/
if ((efep->efe_miih = mii_alloc(efep, dip, &efe_mii_ops)) == NULL) {
efe_error(dip, "unable to allocate mii resources!");
goto failure;
}
/*
* Allocate MAC resources.
*/
if ((macp = mac_alloc(MAC_VERSION)) == NULL) {
efe_error(dip, "unable to allocate mac resources!");
goto failure;
}
macp->m_type_ident = MAC_PLUGIN_IDENT_ETHER;
macp->m_driver = efep;
macp->m_dip = dip;
macp->m_src_addr = efep->efe_macaddr;
macp->m_callbacks = &efe_m_callbacks;
macp->m_min_sdu = 0;
macp->m_max_sdu = ETHERMTU;
macp->m_margin = VLAN_TAGSZ;
if (mac_register(macp, &efep->efe_mh) != 0) {
efe_error(dip, "unable to register with mac!");
goto failure;
}
mac_free(macp);
ddi_report_dev(dip);
return (DDI_SUCCESS);
failure:
if (macp != NULL) {
mac_free(macp);
}
if (efep->efe_miih != NULL) {
mii_free(efep->efe_miih);
}
if (efep->efe_intrh != NULL) {
(void) ddi_intr_disable(efep->efe_intrh);
(void) ddi_intr_remove_handler(efep->efe_intrh);
(void) ddi_intr_free(efep->efe_intrh);
}
mutex_destroy(&efep->efe_txlock);
mutex_destroy(&efep->efe_intrlock);
if (efep->efe_tx_ring != NULL) {
efe_ring_free(&efep->efe_tx_ring);
}
if (efep->efe_rx_ring != NULL) {
efe_ring_free(&efep->efe_rx_ring);
}
if (efep->efe_regs_acch != NULL) {
ddi_regs_map_free(&efep->efe_regs_acch);
}
kmem_free(efep, sizeof (efe_t));
return (DDI_FAILURE);
}
/**
* Sets IRQ for VMMDev.
*
* @returns Solaris error code.
* @param pDip Pointer to the device info structure.
*/
static int VBoxGuestSolarisAddIRQ(dev_info_t *pDip)
{
LogFlow((DEVICE_NAME "::AddIRQ: pDip=%p\n", pDip));
int IntrType = 0;
int rc = ddi_intr_get_supported_types(pDip, &IntrType);
if (rc == DDI_SUCCESS)
{
/* We won't need to bother about MSIs. */
if (IntrType & DDI_INTR_TYPE_FIXED)
{
int IntrCount = 0;
rc = ddi_intr_get_nintrs(pDip, IntrType, &IntrCount);
if ( rc == DDI_SUCCESS
&& IntrCount > 0)
{
int IntrAvail = 0;
rc = ddi_intr_get_navail(pDip, IntrType, &IntrAvail);
if ( rc == DDI_SUCCESS
&& IntrAvail > 0)
{
/* Allocated kernel memory for the interrupt handles. The allocation size is stored internally. */
g_pIntr = RTMemAlloc(IntrCount * sizeof(ddi_intr_handle_t));
if (g_pIntr)
{
int IntrAllocated;
rc = ddi_intr_alloc(pDip, g_pIntr, IntrType, 0, IntrCount, &IntrAllocated, DDI_INTR_ALLOC_NORMAL);
if ( rc == DDI_SUCCESS
&& IntrAllocated > 0)
{
g_cIntrAllocated = IntrAllocated;
uint_t uIntrPriority;
rc = ddi_intr_get_pri(g_pIntr[0], &uIntrPriority);
if (rc == DDI_SUCCESS)
{
/* Initialize the mutex. */
mutex_init(&g_IrqMtx, NULL, MUTEX_DRIVER, DDI_INTR_PRI(uIntrPriority));
/* Assign interrupt handler functions and enable interrupts. */
for (int i = 0; i < IntrAllocated; i++)
{
rc = ddi_intr_add_handler(g_pIntr[i], (ddi_intr_handler_t *)VBoxGuestSolarisISR,
NULL /* No Private Data */, NULL);
if (rc == DDI_SUCCESS)
rc = ddi_intr_enable(g_pIntr[i]);
if (rc != DDI_SUCCESS)
{
/* Changing local IntrAllocated to hold so-far allocated handles for freeing. */
IntrAllocated = i;
break;
}
}
if (rc == DDI_SUCCESS)
return rc;
/* Remove any assigned handlers */
LogRel((DEVICE_NAME ":failed to assign IRQs allocated=%d\n", IntrAllocated));
for (int x = 0; x < IntrAllocated; x++)
ddi_intr_remove_handler(g_pIntr[x]);
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to get priority of interrupt. rc=%d\n", rc));
/* Remove allocated IRQs, too bad we can free only one handle at a time. */
for (int k = 0; k < g_cIntrAllocated; k++)
ddi_intr_free(g_pIntr[k]);
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to allocated IRQs. count=%d\n", IntrCount));
RTMemFree(g_pIntr);
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to allocated IRQs. count=%d\n", IntrCount));
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to get or insufficient available IRQs. rc=%d IntrAvail=%d\n", rc, IntrAvail));
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to get or insufficient number of IRQs. rc=%d IntrCount=%d\n", rc, IntrCount));
}
else
LogRel((DEVICE_NAME "::AddIRQ: invalid irq type. IntrType=%#x\n", IntrType));
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to get supported interrupt types\n"));
return rc;
}
/**
* Sets IRQ for VMMDev.
*
* @returns Solaris error code.
* @param pDip Pointer to the device info structure.
*/
static int vgdrvSolarisAddIRQ(dev_info_t *pDip)
{
LogFlow(("vgdrvSolarisAddIRQ: pDip=%p\n", pDip));
/* Get the types of interrupt supported for this hardware. */
int fIntrType = 0;
int rc = ddi_intr_get_supported_types(pDip, &fIntrType);
if (rc == DDI_SUCCESS)
{
/* We only support fixed interrupts at this point, not MSIs. */
if (fIntrType & DDI_INTR_TYPE_FIXED)
{
/* Verify the number of interrupts supported by this device. There can only be one fixed interrupt. */
int cIntrCount = 0;
rc = ddi_intr_get_nintrs(pDip, fIntrType, &cIntrCount);
if ( rc == DDI_SUCCESS
&& cIntrCount == 1)
{
/* Allocated kernel memory for the interrupt handle. The allocation size is stored internally. */
g_pahIntrs = RTMemAllocZ(cIntrCount * sizeof(ddi_intr_handle_t));
if (g_pahIntrs)
{
/* Allocate the interrupt for this device and verify the allocation. */
int cIntrAllocated;
rc = ddi_intr_alloc(pDip, g_pahIntrs, fIntrType, 0 /* interrupt number */, cIntrCount, &cIntrAllocated,
DDI_INTR_ALLOC_NORMAL);
if ( rc == DDI_SUCCESS
&& cIntrAllocated == 1)
{
/* Get the interrupt priority assigned by the system. */
uint_t uIntrPriority;
rc = ddi_intr_get_pri(g_pahIntrs[0], &uIntrPriority);
if (rc == DDI_SUCCESS)
{
/* Check if the interrupt priority is scheduler level or above, if so we need to use a high-level
and low-level interrupt handlers with corresponding mutexes. */
cmn_err(CE_CONT, "!vboxguest: uIntrPriority=%d hilevel_pri=%d\n", uIntrPriority, ddi_intr_get_hilevel_pri());
if (uIntrPriority >= ddi_intr_get_hilevel_pri())
{
/* Initialize the high-level mutex. */
mutex_init(&g_HighLevelIrqMtx, NULL /* pszDesc */, MUTEX_DRIVER, DDI_INTR_PRI(uIntrPriority));
/* Assign interrupt handler function to the interrupt handle. */
rc = ddi_intr_add_handler(g_pahIntrs[0], (ddi_intr_handler_t *)&vgdrvSolarisHighLevelISR,
NULL /* pvArg1 */, NULL /* pvArg2 */);
if (rc == DDI_SUCCESS)
{
/* Add the low-level interrupt handler. */
rc = ddi_intr_add_softint(pDip, &g_hSoftIntr, DDI_INTR_SOFTPRI_MAX,
(ddi_intr_handler_t *)&vgdrvSolarisISR, NULL /* pvArg1 */);
if (rc == DDI_SUCCESS)
{
/* Initialize the low-level mutex at the corresponding level. */
mutex_init(&g_IrqMtx, NULL /* pszDesc */, MUTEX_DRIVER,
DDI_INTR_PRI(DDI_INTR_SOFTPRI_MAX));
g_fSoftIntRegistered = true;
/* Enable the high-level interrupt. */
rc = ddi_intr_enable(g_pahIntrs[0]);
if (rc == DDI_SUCCESS)
return rc;
LogRel((DEVICE_NAME "::AddIRQ: failed to enable interrupt. rc=%d\n", rc));
mutex_destroy(&g_IrqMtx);
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to add soft interrupt handler. rc=%d\n", rc));
ddi_intr_remove_handler(g_pahIntrs[0]);
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to add high-level interrupt handler. rc=%d\n", rc));
mutex_destroy(&g_HighLevelIrqMtx);
}
else
{
/* Interrupt handler runs at reschedulable level, initialize the mutex at the given priority. */
mutex_init(&g_IrqMtx, NULL /* pszDesc */, MUTEX_DRIVER, DDI_INTR_PRI(uIntrPriority));
/* Assign interrupt handler function to the interrupt handle. */
rc = ddi_intr_add_handler(g_pahIntrs[0], (ddi_intr_handler_t *)vgdrvSolarisISR,
NULL /* pvArg1 */, NULL /* pvArg2 */);
if (rc == DDI_SUCCESS)
{
/* Enable the interrupt. */
rc = ddi_intr_enable(g_pahIntrs[0]);
if (rc == DDI_SUCCESS)
return rc;
LogRel((DEVICE_NAME "::AddIRQ: failed to enable interrupt. rc=%d\n", rc));
mutex_destroy(&g_IrqMtx);
}
}
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to get priority of interrupt. rc=%d\n", rc));
Assert(cIntrAllocated == 1);
ddi_intr_free(g_pahIntrs[0]);
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to allocated IRQs. count=%d\n", cIntrCount));
RTMemFree(g_pahIntrs);
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to allocated IRQs. count=%d\n", cIntrCount));
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to get or insufficient number of IRQs. rc=%d cIntrCount=%d\n", rc, cIntrCount));
}
else
LogRel((DEVICE_NAME "::AddIRQ: fixed-type interrupts not supported. IntrType=%#x\n", fIntrType));
}
else
LogRel((DEVICE_NAME "::AddIRQ: failed to get supported interrupt types. rc=%d\n", rc));
return rc;
}
