static void __devinit i5100_init_csrows(struct mem_ctl_info *mci)
{
int i;
struct i5100_priv *priv = mci->pvt_info;
for (i = 0; i < mci->tot_dimms; i++) {
struct dimm_info *dimm;
const unsigned long npages = i5100_npages(mci, i);
const unsigned chan = i5100_csrow_to_chan(mci, i);
const unsigned rank = i5100_csrow_to_rank(mci, i);
if (!npages)
continue;
dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers,
chan, rank, 0);
dimm->nr_pages = npages;
if (npages) {
dimm->grain = 32;
dimm->dtype = (priv->mtr[chan][rank].width == 4) ?
DEV_X4 : DEV_X8;
dimm->mtype = MEM_RDDR2;
dimm->edac_mode = EDAC_SECDED;
snprintf(dimm->label, sizeof(dimm->label),
"DIMM%u",
i5100_rank_to_slot(mci, chan, rank));
}
debugf2("dimm channel %d, rank %d, size %ld\n",
chan, rank, (long)PAGES_TO_MiB(npages));
}
}
static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev,
int idx)
{
int i, j;
int err;
struct edac_device_instance *instance;
struct kobject *main_kobj;
instance = &edac_dev->instances[idx];
memset(&instance->kobj, 0, sizeof(struct kobject));
instance->ctl = edac_dev;
main_kobj = kobject_get(&edac_dev->kobj);
if (!main_kobj) {
err = -ENODEV;
goto err_out;
}
err = kobject_init_and_add(&instance->kobj, &ktype_instance_ctrl,
&edac_dev->kobj, "%s", instance->name);
if (err != 0) {
debugf2("%s() Failed to register instance '%s'\n",
__func__, instance->name);
kobject_put(main_kobj);
goto err_out;
}
debugf4("%s() now register '%d' blocks for instance %d\n",
__func__, instance->nr_blocks, idx);
for (i = 0; i < instance->nr_blocks; i++) {
err = edac_device_create_block(edac_dev, instance,
&instance->blocks[i]);
if (err) {
for (j = 0; j < i; j++)
edac_device_delete_block(edac_dev,
&instance->blocks[j]);
goto err_release_instance_kobj;
}
}
kobject_uevent(&instance->kobj, KOBJ_ADD);
debugf4("%s() Registered instance %d '%s' kobject\n",
__func__, idx, instance->name);
return 0;
err_release_instance_kobj:
kobject_put(&instance->kobj);
err_out:
return err;
}
/*
* edac_pci_create_instance_kobj
*
* construct one EDAC PCI instance's kobject for use
*/
static int edac_pci_create_instance_kobj(struct edac_pci_ctl_info *pci, int idx)
{
struct kobject *main_kobj;
int err;
debugf0("%s()\n", __func__);
/* First bump the ref count on the top main kobj, which will
* track the number of PCI instances we have, and thus nest
* properly on keeping the module loaded
*/
main_kobj = kobject_get(edac_pci_top_main_kobj);
if (!main_kobj) {
err = -ENODEV;
goto error_out;
}
/* And now register this new kobject under the main kobj */
err = kobject_init_and_add(&pci->kobj, &ktype_pci_instance,
edac_pci_top_main_kobj, "pci%d", idx);
if (err != 0) {
debugf2("%s() failed to register instance pci%d\n",
__func__, idx);
kobject_put(edac_pci_top_main_kobj);
goto error_out;
}
kobject_uevent(&pci->kobj, KOBJ_ADD);
debugf1("%s() Register instance 'pci%d' kobject\n", __func__, idx);
return 0;
/* Error unwind statck */
error_out:
return err;
}
static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
{
struct mem_ctl_info *mci;
u8 dramcr;
u32 eapr;
u32 scrub_disabled;
u32 sdram_refresh_rate;
struct r82600_error_info discard;
debugf0("%s()\n", __func__);
pci_read_config_byte(pdev, R82600_DRAMC, &dramcr);
pci_read_config_dword(pdev, R82600_EAP, &eapr);
scrub_disabled = eapr & BIT(31);
sdram_refresh_rate = dramcr & (BIT(0) | BIT(1));
debugf2("%s(): sdram refresh rate = %#0x\n", __func__,
sdram_refresh_rate);
debugf2("%s(): DRAMC register = %#0x\n", __func__, dramcr);
mci = edac_mc_alloc(0, R82600_NR_CSROWS, R82600_NR_CHANS, 0);
if (mci == NULL)
return -ENOMEM;
debugf0("%s(): mci = %p\n", __func__, mci);
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
/* FIXME try to work out if the chip leads have been used for COM2
* instead on this board? [MA6?] MAYBE:
*/
/* On the R82600, the pins for memory bits 72:65 - i.e. the *
* EC bits are shared with the pins for COM2 (!), so if COM2 *
* is enabled, we assume COM2 is wired up, and thus no EDAC *
* is possible. */
mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
if (ecc_enabled(dramcr)) {
if (scrub_disabled)
debugf3("%s(): mci = %p - Scrubbing disabled! EAP: "
"%#0x\n", __func__, mci, eapr);
} else
mci->edac_cap = EDAC_FLAG_NONE;
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = R82600_REVISION;
mci->ctl_name = "R82600";
mci->dev_name = pci_name(pdev);
mci->edac_check = r82600_check;
mci->ctl_page_to_phys = NULL;
r82600_init_csrows(mci, pdev, dramcr);
r82600_get_error_info(mci, &discard); /* clear counters */
/* Here we assume that we will never see multiple instances of this
* type of memory controller. The ID is therefore hardcoded to 0.
*/
if (edac_mc_add_mc(mci)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
goto fail;
}
/* get this far and it's successful */
if (disable_hardware_scrub) {
debugf3("%s(): Disabling Hardware Scrub (scrub on error)\n",
__func__);
pci_write_bits32(pdev, R82600_EAP, BIT(31), BIT(31));
}
/* allocating generic PCI control info */
r82600_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
if (!r82600_pci) {
printk(KERN_WARNING
"%s(): Unable to create PCI control\n",
__func__);
printk(KERN_WARNING
"%s(): PCI error report via EDAC not setup\n",
__func__);
}
debugf3("%s(): success\n", __func__);
return 0;
fail:
edac_mc_free(mci);
return -ENODEV;
}
/*
* edac_device_create_instance
* create just one instance of an edac_device 'instance'
*/
static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev,
int idx)
{
int i, j;
int err;
struct edac_device_instance *instance;
struct kobject *main_kobj;
instance = &edac_dev->instances[idx];
/* Init the instance's kobject */
memset(&instance->kobj, 0, sizeof(struct kobject));
instance->ctl = edac_dev;
/* bump the main kobject's reference count for this controller
* and this instance is dependant on the main
*/
main_kobj = kobject_get(&edac_dev->kobj);
if (!main_kobj) {
err = -ENODEV;
goto err_out;
}
/* Formally register this instance's kobject under the edac_device */
err = kobject_init_and_add(&instance->kobj, &ktype_instance_ctrl,
&edac_dev->kobj, "%s", instance->name);
if (err != 0) {
debugf2("%s() Failed to register instance '%s'\n",
__func__, instance->name);
kobject_put(main_kobj);
goto err_out;
}
debugf4("%s() now register '%d' blocks for instance %d\n",
__func__, instance->nr_blocks, idx);
/* register all blocks of this instance */
for (i = 0; i < instance->nr_blocks; i++) {
err = edac_device_create_block(edac_dev, instance,
&instance->blocks[i]);
if (err) {
/* If any fail, remove all previous ones */
for (j = 0; j < i; j++)
edac_device_delete_block(edac_dev,
&instance->blocks[j]);
goto err_release_instance_kobj;
}
}
kobject_uevent(&instance->kobj, KOBJ_ADD);
debugf4("%s() Registered instance %d '%s' kobject\n",
__func__, idx, instance->name);
return 0;
/* error unwind stack */
err_release_instance_kobj:
kobject_put(&instance->kobj);
err_out:
return err;
}
/*
* PCI Parity polling
*
*/
static void edac_pci_dev_parity_test(struct pci_dev *dev)
{
u16 status;
u8 header_type;
/* read the STATUS register on this device
*/
status = get_pci_parity_status(dev, 0);
debugf2("PCI STATUS= 0x%04x %s\n", status, dev->dev.bus_id );
/* check the status reg for errors */
if (status) {
if (status & (PCI_STATUS_SIG_SYSTEM_ERROR))
edac_printk(KERN_CRIT, EDAC_PCI,
"Signaled System Error on %s\n",
pci_name(dev));
if (status & (PCI_STATUS_PARITY)) {
edac_printk(KERN_CRIT, EDAC_PCI,
"Master Data Parity Error on %s\n",
pci_name(dev));
atomic_inc(&pci_parity_count);
}
if (status & (PCI_STATUS_DETECTED_PARITY)) {
edac_printk(KERN_CRIT, EDAC_PCI,
"Detected Parity Error on %s\n",
pci_name(dev));
atomic_inc(&pci_parity_count);
}
}
/* read the device TYPE, looking for bridges */
pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
debugf2("PCI HEADER TYPE= 0x%02x %s\n", header_type, dev->dev.bus_id );
if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
/* On bridges, need to examine secondary status register */
status = get_pci_parity_status(dev, 1);
debugf2("PCI SEC_STATUS= 0x%04x %s\n",
status, dev->dev.bus_id );
/* check the secondary status reg for errors */
if (status) {
if (status & (PCI_STATUS_SIG_SYSTEM_ERROR))
edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
"Signaled System Error on %s\n",
pci_name(dev));
if (status & (PCI_STATUS_PARITY)) {
edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
"Master Data Parity Error on "
"%s\n", pci_name(dev));
atomic_inc(&pci_parity_count);
}
if (status & (PCI_STATUS_DETECTED_PARITY)) {
edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
"Detected Parity Error on %s\n",
pci_name(dev));
atomic_inc(&pci_parity_count);
}
}
}
}
