/**
* ir_rc6_decode() - Decode one RC6 pulse or space
* @dev: the struct rc_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
struct rc6_dec *data = &dev->raw->rc6;
u32 scancode;
u8 toggle;
enum rc_proto protocol;
if (!is_timing_event(ev)) {
if (ev.reset)
data->state = STATE_INACTIVE;
return 0;
}
if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
goto out;
again:
IR_dprintk(2, "RC6 decode started at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
return 0;
switch (data->state) {
case STATE_INACTIVE:
if (!ev.pulse)
break;
/* Note: larger margin on first pulse since each RC6_UNIT
is quite short and some hardware takes some time to
adjust to the signal */
if (!eq_margin(ev.duration, RC6_PREFIX_PULSE, RC6_UNIT))
break;
data->state = STATE_PREFIX_SPACE;
data->count = 0;
return 0;
case STATE_PREFIX_SPACE:
if (ev.pulse)
break;
if (!eq_margin(ev.duration, RC6_PREFIX_SPACE, RC6_UNIT / 2))
break;
data->state = STATE_HEADER_BIT_START;
data->header = 0;
return 0;
case STATE_HEADER_BIT_START:
if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
break;
data->header <<= 1;
if (ev.pulse)
data->header |= 1;
data->count++;
data->state = STATE_HEADER_BIT_END;
return 0;
case STATE_HEADER_BIT_END:
if (!is_transition(&ev, &dev->raw->prev_ev))
break;
if (data->count == RC6_HEADER_NBITS)
data->state = STATE_TOGGLE_START;
else
data->state = STATE_HEADER_BIT_START;
decrease_duration(&ev, RC6_BIT_END);
goto again;
case STATE_TOGGLE_START:
if (!eq_margin(ev.duration, RC6_TOGGLE_START, RC6_UNIT / 2))
break;
data->toggle = ev.pulse;
data->state = STATE_TOGGLE_END;
return 0;
case STATE_TOGGLE_END:
if (!is_transition(&ev, &dev->raw->prev_ev) ||
!geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
break;
if (!(data->header & RC6_STARTBIT_MASK)) {
IR_dprintk(1, "RC6 invalid start bit\n");
break;
}
data->state = STATE_BODY_BIT_START;
decrease_duration(&ev, RC6_TOGGLE_END);
data->count = 0;
data->body = 0;
switch (rc6_mode(data)) {
case RC6_MODE_0:
data->wanted_bits = RC6_0_NBITS;
break;
case RC6_MODE_6A:
data->wanted_bits = RC6_6A_NBITS;
break;
default:
IR_dprintk(1, "RC6 unknown mode\n");
goto out;
}
goto again;
case STATE_BODY_BIT_START:
if (eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2)) {
/* Discard LSB's that won't fit in data->body */
if (data->count++ < CHAR_BIT * sizeof data->body) {
data->body <<= 1;
if (ev.pulse)
data->body |= 1;
}
data->state = STATE_BODY_BIT_END;
return 0;
} else if (RC6_MODE_6A == rc6_mode(data) && !ev.pulse &&
geq_margin(ev.duration, RC6_SUFFIX_SPACE, RC6_UNIT / 2)) {
data->state = STATE_FINISHED;
goto again;
}
break;
case STATE_BODY_BIT_END:
if (!is_transition(&ev, &dev->raw->prev_ev))
break;
if (data->count == data->wanted_bits)
data->state = STATE_FINISHED;
else
data->state = STATE_BODY_BIT_START;
decrease_duration(&ev, RC6_BIT_END);
goto again;
case STATE_FINISHED:
if (ev.pulse)
break;
switch (rc6_mode(data)) {
case RC6_MODE_0:
scancode = data->body;
toggle = data->toggle;
protocol = RC_PROTO_RC6_0;
IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
break;
case RC6_MODE_6A:
if (data->count > CHAR_BIT * sizeof data->body) {
IR_dprintk(1, "RC6 too many (%u) data bits\n",
data->count);
goto out;
}
scancode = data->body;
switch (data->count) {
case 20:
protocol = RC_PROTO_RC6_6A_20;
toggle = 0;
break;
case 24:
protocol = RC_PROTO_RC6_6A_24;
toggle = 0;
break;
case 32:
if ((scancode & RC6_6A_LCC_MASK) == RC6_6A_MCE_CC) {
protocol = RC_PROTO_RC6_MCE;
toggle = !!(scancode & RC6_6A_MCE_TOGGLE_MASK);
scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
} else {
protocol = RC_PROTO_RC6_6A_32;
toggle = 0;
}
break;
default:
IR_dprintk(1, "RC6(6A) unsupported length\n");
goto out;
}
IR_dprintk(1, "RC6(6A) proto 0x%04x, scancode 0x%08x (toggle: %u)\n",
protocol, scancode, toggle);
break;
default:
IR_dprintk(1, "RC6 unknown mode\n");
goto out;
}
rc_keydown(dev, protocol, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
out:
IR_dprintk(1, "RC6 decode failed at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}
/**
* ir_rc6_decode() - Decode one RC6 pulse or space
* @input_dev: the struct input_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
static int ir_rc6_decode(struct input_dev *input_dev, struct ir_raw_event ev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
struct rc6_dec *data = &ir_dev->raw->rc6;
u32 scancode;
u8 toggle;
if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC6))
return 0;
if (IS_RESET(ev)) {
data->state = STATE_INACTIVE;
return 0;
}
if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
goto out;
again:
IR_dprintk(2, "RC6 decode started at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
return 0;
switch (data->state) {
case STATE_INACTIVE:
if (!ev.pulse)
break;
/* Note: larger margin on first pulse since each RC6_UNIT
is quite short and some hardware takes some time to
adjust to the signal */
if (!eq_margin(ev.duration, RC6_PREFIX_PULSE, RC6_UNIT))
break;
data->state = STATE_PREFIX_SPACE;
data->count = 0;
return 0;
case STATE_PREFIX_SPACE:
if (ev.pulse)
break;
if (!eq_margin(ev.duration, RC6_PREFIX_SPACE, RC6_UNIT / 2))
break;
data->state = STATE_HEADER_BIT_START;
return 0;
case STATE_HEADER_BIT_START:
if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
break;
data->header <<= 1;
if (ev.pulse)
data->header |= 1;
data->count++;
data->state = STATE_HEADER_BIT_END;
return 0;
case STATE_HEADER_BIT_END:
if (!is_transition(&ev, &ir_dev->raw->prev_ev))
break;
if (data->count == RC6_HEADER_NBITS)
data->state = STATE_TOGGLE_START;
else
data->state = STATE_HEADER_BIT_START;
decrease_duration(&ev, RC6_BIT_END);
goto again;
case STATE_TOGGLE_START:
if (!eq_margin(ev.duration, RC6_TOGGLE_START, RC6_UNIT / 2))
break;
data->toggle = ev.pulse;
data->state = STATE_TOGGLE_END;
return 0;
case STATE_TOGGLE_END:
if (!is_transition(&ev, &ir_dev->raw->prev_ev) ||
!geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
break;
if (!(data->header & RC6_STARTBIT_MASK)) {
IR_dprintk(1, "RC6 invalid start bit\n");
break;
}
data->state = STATE_BODY_BIT_START;
decrease_duration(&ev, RC6_TOGGLE_END);
data->count = 0;
switch (rc6_mode(data)) {
case RC6_MODE_0:
data->wanted_bits = RC6_0_NBITS;
break;
case RC6_MODE_6A:
/* This might look weird, but we basically
check the value of the first body bit to
determine the number of bits in mode 6A */
if ((!ev.pulse && !geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) ||
geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
data->wanted_bits = RC6_6A_LARGE_NBITS;
else
data->wanted_bits = RC6_6A_SMALL_NBITS;
break;
default:
IR_dprintk(1, "RC6 unknown mode\n");
goto out;
}
goto again;
case STATE_BODY_BIT_START:
if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
break;
data->body <<= 1;
if (ev.pulse)
data->body |= 1;
data->count++;
data->state = STATE_BODY_BIT_END;
return 0;
case STATE_BODY_BIT_END:
if (!is_transition(&ev, &ir_dev->raw->prev_ev))
break;
if (data->count == data->wanted_bits)
data->state = STATE_FINISHED;
else
data->state = STATE_BODY_BIT_START;
decrease_duration(&ev, RC6_BIT_END);
goto again;
case STATE_FINISHED:
if (ev.pulse)
break;
switch (rc6_mode(data)) {
case RC6_MODE_0:
scancode = data->body & 0xffff;
toggle = data->toggle;
IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
break;
case RC6_MODE_6A:
if (data->wanted_bits == RC6_6A_LARGE_NBITS) {
toggle = data->body & RC6_6A_MCE_TOGGLE_MASK ? 1 : 0;
scancode = data->body & ~RC6_6A_MCE_TOGGLE_MASK;
} else {
toggle = 0;
scancode = data->body & 0xffffff;
}
IR_dprintk(1, "RC6(6A) scancode 0x%08x (toggle: %u)\n",
scancode, toggle);
break;
default:
IR_dprintk(1, "RC6 unknown mode\n");
goto out;
}
ir_keydown(input_dev, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
out:
IR_dprintk(1, "RC6 decode failed at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}
/**
* ir_rc5_decode() - Decode one RC-5 pulse or space
* @dev: the struct rc_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
struct rc5_dec *data = &dev->raw->rc5;
u8 toggle;
u32 scancode;
if (!(dev->raw->enabled_protocols & RC_TYPE_RC5))
return 0;
if (!is_timing_event(ev)) {
if (ev.reset)
data->state = STATE_INACTIVE;
return 0;
}
if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
goto out;
again:
IR_dprintk(2, "RC5(x) decode started at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
return 0;
switch (data->state) {
case STATE_INACTIVE:
if (!ev.pulse)
break;
data->state = STATE_BIT_START;
data->count = 1;
/* We just need enough bits to get to STATE_CHECK_RC5X */
data->wanted_bits = RC5X_NBITS;
decrease_duration(&ev, RC5_BIT_START);
goto again;
case STATE_BIT_START:
if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
break;
data->bits <<= 1;
if (!ev.pulse)
data->bits |= 1;
data->count++;
data->state = STATE_BIT_END;
return 0;
case STATE_BIT_END:
if (!is_transition(&ev, &dev->raw->prev_ev))
break;
if (data->count == data->wanted_bits)
data->state = STATE_FINISHED;
else if (data->count == CHECK_RC5X_NBITS)
data->state = STATE_CHECK_RC5X;
else
data->state = STATE_BIT_START;
decrease_duration(&ev, RC5_BIT_END);
goto again;
case STATE_CHECK_RC5X:
if (!ev.pulse && geq_margin(ev.duration, RC5X_SPACE, RC5_UNIT / 2)) {
/* RC5X */
data->wanted_bits = RC5X_NBITS;
decrease_duration(&ev, RC5X_SPACE);
} else {
/* RC5 */
data->wanted_bits = RC5_NBITS;
}
data->state = STATE_BIT_START;
goto again;
case STATE_FINISHED:
if (ev.pulse)
break;
if (data->wanted_bits == RC5X_NBITS) {
/* RC5X */
u8 xdata, command, system;
xdata = (data->bits & 0x0003F) >> 0;
command = (data->bits & 0x00FC0) >> 6;
system = (data->bits & 0x1F000) >> 12;
toggle = (data->bits & 0x20000) ? 1 : 0;
command += (data->bits & 0x01000) ? 0 : 0x40;
scancode = system << 16 | command << 8 | xdata;
IR_dprintk(1, "RC5X scancode 0x%06x (toggle: %u)\n",
scancode, toggle);
} else {
/**
* ir_sony_decode() - Decode one Sony pulse or space
* @input_dev: the struct input_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
struct sony_dec *data = &ir_dev->raw->sony;
u32 scancode;
u8 device, subdevice, function;
if (!(ir_dev->raw->enabled_protocols & IR_TYPE_SONY))
return 0;
if (IS_RESET(ev)) {
data->state = STATE_INACTIVE;
return 0;
}
if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2))
goto out;
IR_dprintk(2, "Sony decode started at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
switch (data->state) {
case STATE_INACTIVE:
if (!ev.pulse)
break;
if (!eq_margin(ev.duration, SONY_HEADER_PULSE, SONY_UNIT / 2))
break;
data->count = 0;
data->state = STATE_HEADER_SPACE;
return 0;
case STATE_HEADER_SPACE:
if (ev.pulse)
break;
if (!eq_margin(ev.duration, SONY_HEADER_SPACE, SONY_UNIT / 2))
break;
data->state = STATE_BIT_PULSE;
return 0;
case STATE_BIT_PULSE:
if (!ev.pulse)
break;
data->bits <<= 1;
if (eq_margin(ev.duration, SONY_BIT_1_PULSE, SONY_UNIT / 2))
data->bits |= 1;
else if (!eq_margin(ev.duration, SONY_BIT_0_PULSE, SONY_UNIT / 2))
break;
data->count++;
data->state = STATE_BIT_SPACE;
return 0;
case STATE_BIT_SPACE:
if (ev.pulse)
break;
if (!geq_margin(ev.duration, SONY_BIT_SPACE, SONY_UNIT / 2))
break;
decrease_duration(&ev, SONY_BIT_SPACE);
if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2)) {
data->state = STATE_BIT_PULSE;
return 0;
}
data->state = STATE_FINISHED;
/* Fall through */
case STATE_FINISHED:
if (ev.pulse)
break;
if (!geq_margin(ev.duration, SONY_TRAILER_SPACE, SONY_UNIT / 2))
break;
switch (data->count) {
case 12:
device = bitrev8((data->bits << 3) & 0xF8);
subdevice = 0;
function = bitrev8((data->bits >> 4) & 0xFE);
break;
case 15:
device = bitrev8((data->bits >> 0) & 0xFF);
subdevice = 0;
function = bitrev8((data->bits >> 7) & 0xFD);
break;
case 20:
device = bitrev8((data->bits >> 5) & 0xF8);
subdevice = bitrev8((data->bits >> 0) & 0xFF);
function = bitrev8((data->bits >> 12) & 0xFE);
break;
default:
IR_dprintk(1, "Sony invalid bitcount %u\n", data->count);
goto out;
}
scancode = device << 16 | subdevice << 8 | function;
IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
ir_keydown(input_dev, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
out:
IR_dprintk(1, "Sony decode failed at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}
/**
* ir_rc5_decode() - Decode one RC-5 pulse or space
* @dev: the struct rc_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
struct rc5_dec *data = &dev->raw->rc5;
u8 toggle;
u32 scancode;
enum rc_type protocol;
if (!is_timing_event(ev)) {
if (ev.reset)
data->state = STATE_INACTIVE;
return 0;
}
if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
goto out;
again:
IR_dprintk(2, "RC5(x/sz) decode started at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
return 0;
switch (data->state) {
case STATE_INACTIVE:
if (!ev.pulse)
break;
data->state = STATE_BIT_START;
data->count = 1;
decrease_duration(&ev, RC5_BIT_START);
goto again;
case STATE_BIT_START:
if (!ev.pulse && geq_margin(ev.duration, RC5_TRAILER, RC5_UNIT / 2)) {
data->state = STATE_FINISHED;
goto again;
}
if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
break;
data->bits <<= 1;
if (!ev.pulse)
data->bits |= 1;
data->count++;
data->state = STATE_BIT_END;
return 0;
case STATE_BIT_END:
if (!is_transition(&ev, &dev->raw->prev_ev))
break;
if (data->count == CHECK_RC5X_NBITS)
data->state = STATE_CHECK_RC5X;
else
data->state = STATE_BIT_START;
decrease_duration(&ev, RC5_BIT_END);
goto again;
case STATE_CHECK_RC5X:
if (!ev.pulse && geq_margin(ev.duration, RC5X_SPACE, RC5_UNIT / 2)) {
data->is_rc5x = true;
decrease_duration(&ev, RC5X_SPACE);
} else
data->is_rc5x = false;
data->state = STATE_BIT_START;
goto again;
case STATE_FINISHED:
if (ev.pulse)
break;
if (data->is_rc5x && data->count == RC5X_NBITS) {
/* RC5X */
u8 xdata, command, system;
if (!(dev->enabled_protocols & RC_BIT_RC5X)) {
data->state = STATE_INACTIVE;
return 0;
}
xdata = (data->bits & 0x0003F) >> 0;
command = (data->bits & 0x00FC0) >> 6;
system = (data->bits & 0x1F000) >> 12;
toggle = (data->bits & 0x20000) ? 1 : 0;
command += (data->bits & 0x01000) ? 0 : 0x40;
scancode = system << 16 | command << 8 | xdata;
protocol = RC_TYPE_RC5X;
} else if (!data->is_rc5x && data->count == RC5_NBITS) {
static int ir_rc6_decode(struct rc6_ir *data, struct ir_signal signal,
struct ir_protocol *ip)
{
int i;
i = ip->priv;
if (i >= MAX_RC6_INFR_NR)
goto out;
if (!geq_margin(signal.duration, RC6_UNIT, RC6_UNIT / 2))
goto out;
again:
hiir_debug("RC6 decode started at state %i (%uus %s) "
"count %d header 0x%x bits 0x%llx, count:%d\n",
data->state, signal.duration, TO_STR(signal.pulse),
data->count, data->header, data->bits, data->count);
if (!geq_margin(signal.duration, RC6_UNIT, RC6_UNIT / 2))
return 0;
switch (data->state) {
case STATE_INACTIVE:
if (!signal.pulse)
break;
if (!eq_margin(signal.duration, RC6_PREFIX_PULSE, RC6_UNIT))
break;
data->state = STATE_PREFIX_SPACE;
data->bits = 0;
data->count = 0;
data->header = 0;
memset(&data->this_key, 0, sizeof(struct key_attr));
return 0;
case STATE_PREFIX_SPACE:
if (signal.pulse)
break;
if (!eq_margin(signal.duration, RC6_PREFIX_SPACE,
RC6_UNIT / 2))
break;
data->state = STATE_HEADER_BIT_START;
return 0;
case STATE_HEADER_BIT_START:
if (!eq_margin(signal.duration, RC6_BIT_START,
RC6_UNIT / 2))
break;
data->header <<= 1;
if (signal.pulse)
data->header |= 1;
data->count++;
data->state = STATE_HEADER_BIT_END;
return 0;
case STATE_HEADER_BIT_END:
if (!is_transition(&signal, &data->prev_signal))
break;
if (data->count == RC6_HEADER_NBITS)
data->state = STATE_TOGGLE_START;
else
data->state = STATE_HEADER_BIT_START;
decrease_duration(&signal, RC6_BIT_END);
goto again;
case STATE_TOGGLE_START:
if (!eq_margin(signal.duration, RC6_TOGGLE_START, RC6_UNIT / 2))
break;
data->state = STATE_TOGGLE_END;
return 0;
case STATE_TOGGLE_END:
if (!is_transition(&signal, &data->prev_signal)
|| !geq_margin(signal.duration, RC6_TOGGLE_END,
RC6_UNIT / 2))
break;
data->state = STATE_BIT_START;
decrease_duration(&signal, RC6_TOGGLE_END);
data->count = 0;
goto again;
case STATE_BIT_START:
if (!eq_margin(signal.duration, RC6_BIT_START, RC6_UNIT / 2))
break;
data->bits <<= 1;
if (signal.pulse)
data->bits |= 1;
data->count++;
data->state = STATE_BIT_END;
return 0;
case STATE_BIT_END:
if (!is_transition(&signal, &data->prev_signal))
break;
if (data->count == ip->attr.wanna_bits) {
data->scancode = data->bits;
data->this_key.lower = (data->scancode & (~RC6_TOGGLE_MASK));
data->this_key.upper = 0;
data->state = STATE_FINISHED;
return 0;
} else
data->state = STATE_BIT_START;
decrease_duration(&signal, RC6_BIT_END);
goto again;
case STATE_FINISHED:
if (signal.pulse)
break;
data->state = STATE_INACTIVE;
return 0;
}
out:
hiir_info("RC6 decode failed at state %i (%uus %s), bits received:%d\n",
data->state, signal.duration, TO_STR(signal.pulse), data->count);
data->state = STATE_INACTIVE;
return -EINVAL;
}
/**
* ir_rc5_sz_decode() - Decode one RC-5 Streamzap pulse or space
* @input_dev: the struct input_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
static int ir_rc5_sz_decode(struct input_dev *input_dev, struct ir_raw_event ev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
struct rc5_sz_dec *data = &ir_dev->raw->rc5_sz;
u8 toggle, command, system;
u32 scancode;
if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5_SZ))
return 0;
if (!is_timing_event(ev)) {
if (ev.reset)
data->state = STATE_INACTIVE;
return 0;
}
if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
goto out;
again:
IR_dprintk(2, "RC5-sz decode started at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
return 0;
switch (data->state) {
case STATE_INACTIVE:
if (!ev.pulse)
break;
data->state = STATE_BIT_START;
data->count = 1;
data->wanted_bits = RC5_SZ_NBITS;
decrease_duration(&ev, RC5_BIT_START);
goto again;
case STATE_BIT_START:
if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
break;
data->bits <<= 1;
if (!ev.pulse)
data->bits |= 1;
data->count++;
data->state = STATE_BIT_END;
return 0;
case STATE_BIT_END:
if (!is_transition(&ev, &ir_dev->raw->prev_ev))
break;
if (data->count == data->wanted_bits)
data->state = STATE_FINISHED;
else
data->state = STATE_BIT_START;
decrease_duration(&ev, RC5_BIT_END);
goto again;
case STATE_FINISHED:
if (ev.pulse)
break;
/* RC5-sz */
command = (data->bits & 0x0003F) >> 0;
system = (data->bits & 0x02FC0) >> 6;
toggle = (data->bits & 0x01000) ? 1 : 0;
scancode = system << 6 | command;
IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
ir_keydown(input_dev, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
out:
IR_dprintk(1, "RC5-sz decode failed at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}
static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
struct rc6_dec *data = &dev->raw->rc6;
u32 scancode;
u8 toggle;
if (!(dev->raw->enabled_protocols & RC_TYPE_RC6))
return 0;
if (!is_timing_event(ev)) {
if (ev.reset)
data->state = STATE_INACTIVE;
return 0;
}
if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
goto out;
again:
IR_dprintk(2, "RC6 decode started at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
return 0;
switch (data->state) {
case STATE_INACTIVE:
if (!ev.pulse)
break;
if (!eq_margin(ev.duration, RC6_PREFIX_PULSE, RC6_UNIT))
break;
data->state = STATE_PREFIX_SPACE;
data->count = 0;
return 0;
case STATE_PREFIX_SPACE:
if (ev.pulse)
break;
if (!eq_margin(ev.duration, RC6_PREFIX_SPACE, RC6_UNIT / 2))
break;
data->state = STATE_HEADER_BIT_START;
data->header = 0;
return 0;
case STATE_HEADER_BIT_START:
if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
break;
data->header <<= 1;
if (ev.pulse)
data->header |= 1;
data->count++;
data->state = STATE_HEADER_BIT_END;
return 0;
case STATE_HEADER_BIT_END:
if (!is_transition(&ev, &dev->raw->prev_ev))
break;
if (data->count == RC6_HEADER_NBITS)
data->state = STATE_TOGGLE_START;
else
data->state = STATE_HEADER_BIT_START;
decrease_duration(&ev, RC6_BIT_END);
goto again;
case STATE_TOGGLE_START:
if (!eq_margin(ev.duration, RC6_TOGGLE_START, RC6_UNIT / 2))
break;
data->toggle = ev.pulse;
data->state = STATE_TOGGLE_END;
return 0;
case STATE_TOGGLE_END:
if (!is_transition(&ev, &dev->raw->prev_ev) ||
!geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
break;
if (!(data->header & RC6_STARTBIT_MASK)) {
IR_dprintk(1, "RC6 invalid start bit\n");
break;
}
data->state = STATE_BODY_BIT_START;
decrease_duration(&ev, RC6_TOGGLE_END);
data->count = 0;
data->body = 0;
switch (rc6_mode(data)) {
case RC6_MODE_0:
data->wanted_bits = RC6_0_NBITS;
break;
case RC6_MODE_6A:
data->wanted_bits = RC6_6A_NBITS;
break;
default:
IR_dprintk(1, "RC6 unknown mode\n");
goto out;
}
goto again;
case STATE_BODY_BIT_START:
if (eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2)) {
if (data->count++ < CHAR_BIT * sizeof data->body) {
data->body <<= 1;
if (ev.pulse)
data->body |= 1;
}
data->state = STATE_BODY_BIT_END;
return 0;
} else if (RC6_MODE_6A == rc6_mode(data) && !ev.pulse &&
geq_margin(ev.duration, RC6_SUFFIX_SPACE, RC6_UNIT / 2)) {
data->state = STATE_FINISHED;
goto again;
}
break;
case STATE_BODY_BIT_END:
if (!is_transition(&ev, &dev->raw->prev_ev))
break;
if (data->count == data->wanted_bits)
data->state = STATE_FINISHED;
else
data->state = STATE_BODY_BIT_START;
decrease_duration(&ev, RC6_BIT_END);
goto again;
case STATE_FINISHED:
if (ev.pulse)
break;
switch (rc6_mode(data)) {
case RC6_MODE_0:
scancode = data->body;
toggle = data->toggle;
IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
break;
case RC6_MODE_6A:
if (data->count > CHAR_BIT * sizeof data->body) {
IR_dprintk(1, "RC6 too many (%u) data bits\n",
data->count);
goto out;
}
scancode = data->body;
if (data->count == RC6_6A_32_NBITS &&
(scancode & RC6_6A_LCC_MASK) == RC6_6A_MCE_CC) {
toggle = (scancode & RC6_6A_MCE_TOGGLE_MASK) ? 1 : 0;
scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
} else {
toggle = 0;
}
IR_dprintk(1, "RC6(6A) scancode 0x%08x (toggle: %u)\n",
scancode, toggle);
break;
default:
IR_dprintk(1, "RC6 unknown mode\n");
goto out;
}
rc_keydown(dev, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
out:
IR_dprintk(1, "RC6 decode failed at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}
