/*
* this is the callback that the NAND core calls to write a page. Since
* writing a page with ECC or without is similar, all the work is done
* by write_page above.
*/
static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
/*
* for regular page writes, we let HW handle all the ECC
* data written to the device.
*/
if (oob_required)
/* switch to main + spare access */
denali_mode_main_spare_access(denali);
else
/* switch to main access only */
denali_mode_main_access(denali);
return write_page(mtd, chip, buf, false, oob_required);
}
/*
* This is the callback that the NAND core calls to write a page without ECC.
* raw access is similar to ECC page writes, so all the work is done in the
* write_page() function above.
*/
static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
/*
* for raw page writes, we want to disable ECC and simply write
* whatever data is in the buffer.
*/
if (oob_required)
/* switch to main + spare access */
denali_mode_main_spare_access(denali);
else
/* switch to main access only */
denali_mode_main_access(denali);
return write_page(mtd, chip, buf, true, oob_required);
}
static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
uint32_t irq_status, irq_mask = INTR_STATUS__DMA_CMD_COMP;
if (denali->page != page) {
debug("Missing NAND_CMD_READ0 command\n");
return -EIO;
}
if (oob_required)
/* switch to main + spare access */
denali_mode_main_spare_access(denali);
else
/* switch to main access only */
denali_mode_main_access(denali);
/* setting up the DMA where ecc_enable is true */
irq_status = denali_dma_configuration(denali, DENALI_READ, false,
irq_mask, oob_required);
memcpy(buf, denali->buf.dma_buf, mtd->writesize);
/* check whether any ECC error */
if (irq_status & INTR_STATUS__ECC_UNCOR_ERR) {
/* is the ECC cause by erase page, check using read_page_raw */
debug(" Uncorrected ECC detected\n");
denali_read_page_raw(mtd, chip, buf, oob_required,
denali->page);
if (is_erased(buf, mtd->writesize) == true &&
is_erased(chip->oob_poi, mtd->oobsize) == true) {
debug(" ECC error cause by erased block\n");
/* false alarm, return the 0xFF */
} else {
return -EBADMSG;
}
}
memcpy(buf, denali->buf.dma_buf, mtd->writesize);
return 0;
}
/* raw include ECC value and all the spare area */
static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
uint32_t irq_status, irq_mask = INTR_STATUS__DMA_CMD_COMP;
if (denali->page != page) {
debug("Missing NAND_CMD_READ0 command\n");
return -EIO;
}
if (oob_required)
/* switch to main + spare access */
denali_mode_main_spare_access(denali);
else
/* switch to main access only */
denali_mode_main_access(denali);
/* setting up the DMA where ecc_enable is false */
irq_status = denali_dma_configuration(denali, DENALI_READ, true,
irq_mask, oob_required);
/* if timeout happen, error out */
if (!(irq_status & INTR_STATUS__DMA_CMD_COMP)) {
debug("DMA timeout for denali_read_page_raw\n");
return -EIO;
}
/* splitting the content to destination buffer holder */
memcpy(chip->oob_poi, (denali->buf.dma_buf + mtd->writesize),
mtd->oobsize);
memcpy(buf, denali->buf.dma_buf, mtd->writesize);
return 0;
}
