Пример #1
0
int erase_partition(const char *partition, const char *filesystem)
{
    int type = detect_partition(NULL, partition);
    switch (type) {
        case MTD:
            return cmd_mtd_erase_partition(partition, filesystem);
        case MMC:
            return cmd_mmc_erase_partition(partition, filesystem);
        case BML:
            return cmd_bml_erase_partition(partition, filesystem);
        default:
            return -1;
    }
}
Пример #2
0
int mount_partition(const char *partition, const char *mount_point, const char *filesystem, int read_only)
{
    int type = detect_partition(NULL, partition);
    switch (type) {
        case MTD:
            return cmd_mtd_mount_partition(partition, mount_point, filesystem, read_only);
        case MMC:
            return cmd_mmc_mount_partition(partition, mount_point, filesystem, read_only);
        case BML:
            return cmd_bml_mount_partition(partition, mount_point, filesystem, read_only);
        default:
            return -1;
    }
}
Пример #3
0
int restore_raw_partition(const char* partitionType, const char *partition, const char *filename)
{
    int type = detect_partition(partitionType, partition);
    switch (type) {
        case MTD:
            return cmd_mtd_restore_raw_partition(partition, filename);
        case MMC:
            return cmd_mmc_restore_raw_partition(partition, filename);
        case BML:
            return cmd_bml_restore_raw_partition(partition, filename);
        default:
            return -1;
    }
}
Пример #4
0
int erase_raw_partition(const char* partitionType, const char *partition)
{
    int type = detect_partition(partitionType, partition);
    switch (type) {
        case MTD:
            return cmd_mtd_erase_raw_partition(partition);
        case MMC:
            return cmd_mmc_erase_raw_partition(partition);
        case BML:
            return cmd_bml_erase_raw_partition(partition);
        default:
            return -1;
    }
}
Пример #5
0
int backup_raw_partition(const char* partitionType, const char *partition, const char *filename)
{
    int type = detect_partition(partitionType, partition);
    switch (type) {
        case MTD:
            return cmd_mtd_backup_raw_partition(partition, filename);
        case MMC:
            return cmd_mmc_backup_raw_partition(partition, filename);
        case BML:
            return cmd_bml_backup_raw_partition(partition, filename);
        default:
            printf("unable to detect device type");
            return -1;
    }
}
Пример #6
0
Файл: main.c Проект: xxha/sclib
/*
Function:Display the environment of redboot.

*/
int display_redboot_config(){
	int ret,index_part,i;
	FILE *file_dev;
	UINT8 str[32];
	ERASE_INFO_USER eraseInfo;
	
	ret=detect_partition();
	if(ret!=0){
		printf("Failed to retrive the redboot config .\n");
		return ret;
	}
	
	//check the partion name.
	index_part=-1;
	for(i=0;i<partition_num;i++){
		if(strcmp("RedBoot config",partion_table[i].partion_name)==0){
			index_part=i;
			break;
		}
	}
	if(-1==index_part){
		printf("Failed to retrive the redboot config .\n");
		return -1;
	}
	memset(str,0x00,sizeof(str));
	sprintf(str,"/dev/mtd%d",index_part);
	file_dev=fopen(str,"r");
	if(NULL==file_dev){
		perror(NULL);
		printf("Failed to open the device file \"%s\".\n",str);
		return -1;
	}
	memset(tempBuf,0x00,sizeof(tempBuf));

	ret=fread(tempBuf,1,MAX_CONFIG_DATA,file_dev);
	if(EOF==ret){
		printf("Failed to read \"%s\" device file .\n",str);
		return -1;
	}
	for(i=0;i<MAX_CONFIG_DATA;i++){
		printf("%02x",tempBuf[i]);
	}

	fclose(file_dev);
	return 0;

}
Пример #7
0
Файл: main.c Проект: xxha/sclib
//Return value :0 ,success;-1 illegal parameter .-2 the other error.
 int main(int argc,char **argv){
 	
	int ret,i;
	UINT8 partition_name[32],image_name[64];

	if(1==argc){
		usage(argv[0]);		
		return -1;
	}
	if(2==argc){
		if(strcmp("-l",argv[1])==0){
			ret=detect_partition();
			if(0!=ret){
				printf("Failed to detect partition infomation.\n");
				return -1;
			}
			printf("----------------------------------------------------------------------\n");
			printf("Part Name\t\t\tStart Addr\t\tLength\n");
			printf("----------------------------------------------------------------------\n");
			for(i=0;i<partition_num;i++){
				printf("%-16s\t\t0x%08X\t\t0x%08X\n",partion_table[i].partion_name,partion_table[i].start_addr,partion_table[i].len);
			}
			printf("----------------------------------------------------------------------\n");
			return 0;
		}
#if 0
		if(strcmp("-d",argv[1])==0){
			ret=display_redboot_config();
			return ret;
		}
#endif 

		usage(argv[0]);
		return -1;
	}
	if(4==argc){
		if(strcmp("-w",argv[1])==0){//write image into partion.
			strcpy(image_name,argv[2]);
			strcpy(partition_name,argv[3]);
			ret=write_image_to_partition(image_name,partition_name);
			return ret;
 		}
		if(strcmp("-r",argv[1])==0){			
			strcpy(partition_name,argv[2]);
			strcpy(image_name,argv[3]);
			ret=read_image_from_partition(image_name,partition_name);
			return ret;

		}
	}
	usage(argv[0]);
	return -1;
#if 0	
	//analyse the input parameter.
	if(argc==1){
		usage(argv[0]);
	}
	

 	//check the input parameter.
 	if(argc!=2){
		usage();
		return -1; // illegal input parameter.
	}
	strcpy(imageName,argv[1]);
	//update the partion 
	ret=update(imageName);
	if(ret!=0){
		printf("Error:failed to update %s\n",imageName);
		return -2;
	}
	printf("Sir ,%s is upgraded!\n",imageName);	
#endif
	return 0;
 }
Пример #8
0
Файл: main.c Проект: xxha/sclib
/*
Function:
	snatch the image from pation into a file .
Return value:
	0:Success.
	-1:Error.
*/
int read_image_from_partition(UINT8 *image,UINT8 *partition){
	int i,j,index_part,ret,counts;
	INT8 option;
	UINT8 str[32],md5sum1[64],md5sum2[64],*ptr;
	FILE *dst_file,*src_file,*tst_file,*pipe_file;
	ERASE_INFO_USER eraseInfo;

	int block=BLOCK_SIZES_FOR_WRITE;
	long totalLen,backLen,len;

	ret=detect_partition();
	if(0!=ret){
		printf("Failed to detect partition infomation.\n");
		return -1;
	}
	//check the partion name.
	index_part=-1;
	for(i=0;i<partition_num;i++){
		if(strcmp(partition,partion_table[i].partion_name)==0){
			index_part=i;
			break;
		}
	}
	if(-1==index_part){
		printf("index_part:%d\n",index_part);
		printf("The partition \"%s\" is not existent.please check your input.\n",partition);
		return -1;
	}
	printf("Snatch the flash image .This will overwrite \"%s\" image file . Are you sure?[y/n]:",image);
	scanf("%c",&option);
	if('y'!=option){
		printf("Acting only after careful consideration.:)\n");
		return -1;
	}
	//add patch for special mtdblock3 of v300
	if(strcmp(partition,"Usr")==0){
		return snatch_usr_v300(index_part,image);
	}

	//ok, now update the partion.
	dst_file=fopen(image,"w");
	if(NULL==dst_file){
		printf("Failed to open the image file \"%s\".\n",image);
		return -1;
	}
	memset(str,0x00,sizeof(str));
	sprintf(str,"/dev/mtd%d",index_part);
	src_file=fopen(str,"r+");
	if(NULL==src_file){
		printf("Failed to open the device file \"%s\".\n",str);
		return -1;
	}

	totalLen=partion_table[index_part].len;
	backLen=totalLen;
	counts=(totalLen+block-1)/block;
	i=0;
	while(totalLen>0){
		if(totalLen>block){
			len=block;
			totalLen-=block;
		}
		else{	
			len=totalLen;
			totalLen=0;
		}		
		ret=fread(tempBuf,1,len,src_file);
		if(ret!=len){
			printf("Error: fail to read data from source file \"%s\".\n",image);
			goto EXIT;
		}
			
		ret=fwrite(tempBuf,1,len,dst_file);
		if(ret!=len){
			printf("Error:failed to write dev file \"%s\".\n",str);
			goto EXIT;
		}				
	}

SUCC:
	fclose(src_file);
	fclose(dst_file);
	printf("Congratulation,the \"%s\" partition has been wroten into \"%s\" image successfully.\n",partition,image);
	return 0;	
EXIT:	
	fclose(src_file);
	fclose(dst_file);
	printf("Sorry, failed .Try again.\n");
	return -1;

}
Пример #9
0
Файл: main.c Проект: xxha/sclib
/*
Function: write image context into the flash partion.
Return Value:
	0:Success.
	-1:Error.
*/
int write_image_to_partition(UINT8 *image,UINT8 * partition){
#if 1
	int i,j,index_part,ret,counts;
	INT8 option;
	UINT8 str[32],*ptr;
	FILE *dst_file,*src_file,*tst_file,*pipe_file;
	ERASE_INFO_USER eraseInfo;

	int block=BLOCK_SIZES_FOR_WRITE;
	long totalLen,backLen,len;

	ret=detect_partition();
	if(0!=ret){
		printf("Failed to detect partition infomation.\n");
		return -1;
	}
	//check the partion name.
	index_part=-1;
	for(i=0;i<partition_num;i++){
		if(strcmp(partition,partion_table[i].partion_name)==0){
			index_part=i;
			break;
		}
	}
	if(-1==index_part){
		printf("index_part:%d\n",index_part);
		printf("The partition \"%s\" is not existent.please check your input.\n",partition);
		return -1;
	}
	printf("This will overwrite \"%s\" partion .This may destroy your unit .Are you sure?[y/n]:",partition);
	scanf("%c",&option);
	if('y'!=option){
		printf("Acting only after careful consideration.:)\n");
		return -1;
	}
	//add patch for special mtdblock3 of v300
	if(strcmp(partition,"Usr")==0){
		return update_usr_v300(index_part,image);
	}
	//ok, now update the partion.
	src_file=fopen(image,"r");
	if(NULL==src_file){
		printf("Failed to open the image file \"%s\".\n",image);
		return -1;
	}
	memset(str,0x00,sizeof(str));
	sprintf(str,"/dev/mtd%d",index_part);
	dst_file=fopen(str,"r+");
	if(NULL==dst_file){
		printf("Failed to open the device file \"%s\".\n",str);
		return -1;
	}

	//erase the device partion before write.
	eraseInfo.start=0;
	eraseInfo.length=partion_table[i].len;
	ret=ioctl(fileno(dst_file),MEMERASE,&eraseInfo);
	if(0!=ret){
		printf("Failed to erase memory.\n");
		return -1;
	}

	fseek(src_file,0,SEEK_END);
	totalLen=ftell(src_file);
	fseek(src_file,0,SEEK_SET);
	backLen=totalLen;
	counts=(totalLen+block-1)/block;
	i=0;
	while(totalLen>0){
		if(totalLen>block){
			len=block;
			totalLen-=block;
		}
		else{	
			len=totalLen;
			totalLen=0;
		}		
		ret=fread(tempBuf,1,len,src_file);
		if(ret!=len){
			printf("Error: fail to read data from source file \"%s\".\n",image);
			goto EXIT;
		}
			
		ret=fwrite(tempBuf,1,len,dst_file);
		if(ret!=len){
			printf("Error:failed to write dev file \"%s\".\n",str);
			goto EXIT;
		}				
	}

	//check the integrity of partition file.
	tst_file=fopen("tmp","w");
	if(NULL==tst_file){
		printf("Failed to create temp file for test image \"%\"",image);
		return -1;
	}
	
	totalLen=backLen;
	fflush(dst_file);
	fseek(dst_file,0,SEEK_SET);
	while(totalLen>0){
		if(totalLen>block){
			len=block;
			totalLen-=block;
		}
		else{	
			len=totalLen;
			totalLen=0;
		}	
		//printf("%d ",totalLen);
		ret=fread(tempBuf,1,len,dst_file);
		if(ret!=len){
			printf("Error: fail to read data from source file \"%s\".\n",image);
			goto EXIT;
		}
			
		ret=fwrite(tempBuf,1,len,tst_file);
		if(ret!=len){
			printf("Error:failed to write to file tmp\n");
			goto EXIT;
		}						
	}
	if(NULL!=tst_file){
		fclose(tst_file);
		tst_file=NULL;
	}
	//get the number of partition 
	memset(str,0x00,sizeof(str));
	sprintf(str,"md5sum %s",image);
	pipe_file=popen(str,"r");
	if(NULL==pipe_file){
		printf("Failed to retrive the partition information.\n");
		return -1;
	}
	fgets(md5sum1,sizeof(md5sum1),pipe_file);
	pclose(pipe_file);
	memset(str,0x00,sizeof(str));
	sprintf(str,"md5sum tmp");
	pipe_file=popen(str,"r");
	if(NULL==pipe_file){
		printf("Failed to retrive the partition information.\n");
		return -1;
	}
	fgets(md5sum2,sizeof(md5sum2),pipe_file);
	pclose(pipe_file);

	ptr=index(md5sum1,' ');
	i=ptr-md5sum1;

	md5sum1[i]=0x00;
	md5sum2[i]=0x00;
	//printf("%s \n%s\n",md5sum1,md5sum2);
	if(strcmp(md5sum1,md5sum2)!=0){
		printf("The context in \"%s\" partition is not same with \"%s\".Please try again.\n",partition,image);
		return -1;
	}


SUCC:
	fclose(src_file);
	fclose(dst_file);
	if(NULL!=tst_file){
		fclose(tst_file);
		tst_file=NULL;
	}
	printf("Congratulation,the \"%s\" image has been wroten into \"%s\" partition successfully.\n",image,partition);
	return 0;	
EXIT:	
	fclose(src_file);
	fclose(dst_file);
	if(NULL!=tst_file){
		fclose(tst_file);
		tst_file=NULL;
	}
#endif

	return -1;
}