/*
* Allocate and initialise a new MMC card structure.
*/
struct mmc_card *mmc_alloc_card(struct mmc_host *host, struct device_type *type)
{
struct mmc_card *card;
card = kzalloc(sizeof(struct mmc_card), GFP_KERNEL);
if (!card)
return ERR_PTR(-ENOMEM);
card->host = host;
device_initialize(&card->dev);
card->dev.parent = mmc_classdev(host);
card->dev.bus = &mmc_bus_type;
card->dev.release = mmc_release_card;
card->dev.type = type;
spin_lock_init(&card->wr_pack_stats.lock);
return card;
}
stm_display_device_t *stm_display_get_device(unsigned id)
{
if(id>=maxDevices)
return 0;
if(theDevices[id].public_dev.lock == 0)
{
if(device_initialize(id) < 0)
return 0;
}
else
{
if(g_pIOS->DownSemaphore(theDevices[id].public_dev.lock) != 0)
return 0;
}
theDevices[id].use_count++;
g_pIOS->UpSemaphore(theDevices[id].public_dev.lock);
return &theDevices[id].public_dev;
}
/*
* Init/exit code for the module. Basically, creates/removes /sys/class/rc
*/
int __init edac_mc_sysfs_init(void)
{
struct bus_type *edac_subsys;
int err;
/* get the /sys/devices/system/edac subsys reference */
edac_subsys = edac_get_sysfs_subsys();
if (edac_subsys == NULL) {
edac_dbg(1, "no edac_subsys\n");
err = -EINVAL;
goto out;
}
mci_pdev = kzalloc(sizeof(*mci_pdev), GFP_KERNEL);
if (!mci_pdev) {
err = -ENOMEM;
goto out_put_sysfs;
}
mci_pdev->bus = edac_subsys;
mci_pdev->type = &mc_attr_type;
device_initialize(mci_pdev);
dev_set_name(mci_pdev, "mc");
err = device_add(mci_pdev);
if (err < 0)
goto out_dev_free;
edac_dbg(0, "device %s created\n", dev_name(mci_pdev));
return 0;
out_dev_free:
kfree(mci_pdev);
out_put_sysfs:
edac_put_sysfs_subsys();
out:
return err;
}
static struct device *__nd_pfn_create(struct nd_region *nd_region,
u8 *uuid, enum nd_pfn_mode mode,
struct nd_namespace_common *ndns)
{
struct nd_pfn *nd_pfn;
struct device *dev;
/* we can only create pages for contiguous ranged of pmem */
if (!is_nd_pmem(&nd_region->dev))
return NULL;
nd_pfn = kzalloc(sizeof(*nd_pfn), GFP_KERNEL);
if (!nd_pfn)
return NULL;
nd_pfn->id = ida_simple_get(&nd_region->pfn_ida, 0, 0, GFP_KERNEL);
if (nd_pfn->id < 0) {
kfree(nd_pfn);
return NULL;
}
nd_pfn->mode = mode;
if (uuid)
uuid = kmemdup(uuid, 16, GFP_KERNEL);
nd_pfn->uuid = uuid;
dev = &nd_pfn->dev;
dev_set_name(dev, "pfn%d.%d", nd_region->id, nd_pfn->id);
dev->parent = &nd_region->dev;
dev->type = &nd_pfn_device_type;
dev->groups = nd_pfn_attribute_groups;
device_initialize(&nd_pfn->dev);
if (ndns && !__nd_attach_ndns(&nd_pfn->dev, ndns, &nd_pfn->ndns)) {
dev_dbg(&ndns->dev, "%s failed, already claimed by %s\n",
__func__, dev_name(ndns->claim));
put_device(dev);
return NULL;
}
return dev;
}
struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr)
{
struct mdio_device *mdiodev;
/* We allocate the device, and initialize the default values */
mdiodev = kzalloc(sizeof(*mdiodev), GFP_KERNEL);
if (!mdiodev)
return ERR_PTR(-ENOMEM);
mdiodev->dev.release = mdio_device_release;
mdiodev->dev.parent = &bus->dev;
mdiodev->dev.bus = &mdio_bus_type;
mdiodev->device_free = mdio_device_free;
mdiodev->device_remove = mdio_device_remove;
mdiodev->bus = bus;
mdiodev->addr = addr;
dev_set_name(&mdiodev->dev, PHY_ID_FMT, bus->id, addr);
device_initialize(&mdiodev->dev);
return mdiodev;
}
/*
* Allocate and initialise a new MMC card structure.
*/
struct mmc_card *mmc_alloc_card(struct mmc_host *host, struct device_type *type)
{
struct mmc_card *card;
DBG("[%s] s\n",__func__);
card = kzalloc(sizeof(struct mmc_card), GFP_KERNEL);
if (!card) {
DBG("[%s] e1\n",__func__);
return ERR_PTR(-ENOMEM);
}
card->host = host;
device_initialize(&card->dev);
card->dev.parent = mmc_classdev(host);
card->dev.bus = &mmc_bus_type;
card->dev.release = mmc_release_card;
card->dev.type = type;
DBG("[%s] e2\n",__func__);
return card;
}
/**
* spmi_alloc_device: Allocate a new SPMI devices.
* @ctrl: controller to which this device is to be added to.
* Context: can sleep
*
* Allows a driver to allocate and initialize a SPMI device without
* registering it immediately. This allows a driver to directly fill
* the spmi_device structure before calling spmi_add_device().
*
* Caller is responsible to call spmi_add_device() on the returned
* spmi_device. If the caller needs to discard the spmi_device without
* adding it, then spmi_dev_put() should be called.
*/
struct spmi_device *spmi_alloc_device(struct spmi_controller *ctrl)
{
struct spmi_device *spmidev;
if (!ctrl || !spmi_busnum_to_ctrl(ctrl->nr)) {
pr_err("Missing SPMI controller\n");
return NULL;
}
spmidev = kzalloc(sizeof(*spmidev), GFP_KERNEL);
if (!spmidev) {
dev_err(&ctrl->dev, "unable to allocate spmi_device\n");
return NULL;
}
spmidev->ctrl = ctrl;
spmidev->dev.parent = ctrl->dev.parent;
spmidev->dev.bus = &spmi_bus_type;
spmidev->dev.type = &spmi_dev_type;
device_initialize(&spmidev->dev);
return spmidev;
}
static struct device *
snd_create_device(struct device *parent,
struct device_driver *driver,
const char *name)
{
struct device *device;
int ret;
device = devm_kzalloc(parent, sizeof(*device), GFP_KERNEL);
if (!device)
return ERR_PTR(-ENOMEM);
device_initialize(device);
device->parent = parent;
device->driver = driver;
dev_set_name(device, "%s", name);
ret = snd_devm_add_child(parent, device);
if (ret)
return ERR_PTR(ret);
return device;
}
int device_demo_register(struct device_demo* pdev)
{
if(!pdev)
return -1;
device_initialize(&pdev->dev);
if(!pdev->dev.parent)
pdev->dev.parent = get_bus_demo_dev();
if(strlen(pdev->dev.bus_id) <= 0)
strncpy(pdev->dev.bus_id,pdev->name,BUS_ID_SIZE);
pdev->dev.bus = get_bus_demo();
int ret = 0;
ret = device_add(&pdev->dev);
if(ret)
{
printk("[Error]=[%s:%s:%d]=call fun device_add failed.\n",__FILE__,__func__,__LINE__);
return -1;
}
return 0;
}
/**
* rmi_register_transport_device - register a transport device connection
* on the RMI bus. Transport drivers provide communication from the devices
* on a bus (such as SPI, I2C, and so on) to the RMI4 sensor.
*
* @xport: the transport device to register
*/
int rmi_register_transport_device(struct rmi_transport_dev *xport)
{
static atomic_t transport_device_count = ATOMIC_INIT(0);
struct rmi_device *rmi_dev;
int error;
rmi_dev = kzalloc(sizeof(struct rmi_device), GFP_KERNEL);
if (!rmi_dev)
return -ENOMEM;
device_initialize(&rmi_dev->dev);
rmi_dev->xport = xport;
rmi_dev->number = atomic_inc_return(&transport_device_count) - 1;
dev_set_name(&rmi_dev->dev, "rmi4-%02d", rmi_dev->number);
rmi_dev->dev.bus = &rmi_bus_type;
rmi_dev->dev.type = &rmi_device_type;
xport->rmi_dev = rmi_dev;
error = device_add(&rmi_dev->dev);
if (error)
goto err_put_device;
rmi_dbg(RMI_DEBUG_CORE, xport->dev,
"%s: Registered %s as %s.\n", __func__,
dev_name(rmi_dev->xport->dev), dev_name(&rmi_dev->dev));
return 0;
err_put_device:
put_device(&rmi_dev->dev);
return error;
}
/**
* mcb_alloc_bus() - Allocate a new @mcb_bus
*
* Allocate a new @mcb_bus.
*/
struct mcb_bus *mcb_alloc_bus(struct device *carrier)
{
struct mcb_bus *bus;
int bus_nr;
int rc;
bus = kzalloc(sizeof(struct mcb_bus), GFP_KERNEL);
if (!bus)
return ERR_PTR(-ENOMEM);
bus_nr = ida_simple_get(&mcb_ida, 0, 0, GFP_KERNEL);
if (bus_nr < 0) {
rc = bus_nr;
goto err_free;
}
bus->bus_nr = bus_nr;
bus->carrier = get_device(carrier);
device_initialize(&bus->dev);
bus->dev.parent = carrier;
bus->dev.bus = &mcb_bus_type;
bus->dev.type = &mcb_carrier_device_type;
bus->dev.release = &mcb_free_bus;
dev_set_name(&bus->dev, "mcb:%d", bus_nr);
rc = device_add(&bus->dev);
if (rc)
goto err_free;
return bus;
err_free:
put_device(carrier);
kfree(bus);
return ERR_PTR(rc);
}
/**
* amba_device_register - register an AMBA device
* @dev: AMBA device to register
* @parent: parent memory resource
*
* Setup the AMBA device, reading the cell ID if present.
* Claim the resource, and register the AMBA device with
* the Linux device manager.
*/
int amba_device_register(struct amba_device *dev, struct resource *parent)
{
u32 size;
void __iomem *tmp;
int i, ret;
device_initialize(&dev->dev);
/*
* Copy from device_add
*/
if (dev->dev.init_name) {
dev_set_name(&dev->dev, "%s", dev->dev.init_name);
dev->dev.init_name = NULL;
}
dev->dev.release = amba_device_release;
dev->dev.bus = &amba_bustype;
dev->dev.dma_mask = &dev->dma_mask;
dev->res.name = dev_name(&dev->dev);
if (!dev->dev.coherent_dma_mask && dev->dma_mask)
dev_warn(&dev->dev, "coherent dma mask is unset\n");
ret = request_resource(parent, &dev->res);
if (ret)
goto err_out;
/*
* Dynamically calculate the size of the resource
* and use this for iomap
*/
size = resource_size(&dev->res);
tmp = ioremap(dev->res.start, size);
if (!tmp) {
ret = -ENOMEM;
goto err_release;
}
ret = amba_get_enable_pclk(dev);
if (ret == 0) {
u32 pid, cid;
/*
* Read pid and cid based on size of resource
* they are located at end of region
*/
for (pid = 0, i = 0; i < 4; i++)
pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) <<
(i * 8);
for (cid = 0, i = 0; i < 4; i++)
cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) <<
(i * 8);
amba_put_disable_pclk(dev);
if (cid == AMBA_CID)
dev->periphid = pid;
if (!dev->periphid)
ret = -ENODEV;
}
iounmap(tmp);
if (ret)
goto err_release;
ret = device_add(&dev->dev);
if (ret)
goto err_release;
if (dev->irq[0] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq0);
if (ret == 0 && dev->irq[1] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq1);
if (ret == 0)
return ret;
device_unregister(&dev->dev);
err_release:
release_resource(&dev->res);
err_out:
return ret;
}
int device_register(struct device *dev)
{
device_initialize(dev);
return device_add(dev);
}
/*
* probe - binds to the platform device
*/
static int s3c_udc_probe(struct platform_device *pdev)
{
struct s3c_udc *dev = &memory;
int retval;
DEBUG("%s: %p\n", __func__, pdev);
#if 0// !NO_USING_USB_SWITCH
retval = i2c_add_driver(&fsa9480_i2c_driver);
if (retval != 0)
DEBUG_ERROR("[USB Switch] can't add i2c driver");
#endif
spin_lock_init(&dev->lock);
dev->dev = pdev;
device_initialize(&dev->gadget.dev);
dev->gadget.dev.parent = &pdev->dev;
dev->gadget.is_dualspeed = 1; // Hack only
dev->gadget.is_otg = 0;
dev->gadget.is_a_peripheral = 0;
dev->gadget.b_hnp_enable = 0;
dev->gadget.a_hnp_support = 0;
dev->gadget.a_alt_hnp_support = 0;
dev->udc_state = USB_STATE_NOTATTACHED;
dev->config_gadget_driver = NO_GADGET_DRIVER;
dev->clocked = 0;
dev->powered = 0;
the_controller = dev;
platform_set_drvdata(pdev, dev);
otg_clock = clk_get(&pdev->dev, "otg");
if (IS_ERR(otg_clock)) {
DEBUG_ERROR(KERN_INFO "failed to find otg clock source\n");
return -ENOENT;
}
#ifndef CONFIG_PM
clk_enable(otg_clock);
#endif
s3c_ep_list_reinit(dev);
local_irq_disable();
/* irq setup after old hardware state is cleaned up */
retval = request_irq(IRQ_OTG, s3c_udc_irq, 0, driver_name, dev);
if (retval != 0) {
DEBUG(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name,
IRQ_OTG, retval);
return -EBUSY;
}
disable_irq(IRQ_OTG);
local_irq_enable();
create_proc_files();
//it just prints which file included regarding whether DMA mode or SLAVE mode
s3c_show_mode();
#if TESTING_SOFT_CONNCTION
soft_switch.name = SOFT_SWITCH_NAME;
soft_switch.print_name = soft_switch_name;
soft_switch.print_state = soft_switch_state;
soft_switch.state = 0;
if (switch_dev_register(&soft_switch) < 0)
switch_dev_unregister(&soft_switch);
#endif
return retval;
}
/**
* usb_alloc_dev - usb device constructor (usbcore-internal)
* @parent: hub to which device is connected; null to allocate a root hub
* @bus: bus used to access the device
* @port1: one-based index of port; ignored for root hubs
* Context: !in_interrupt()
*
* Only hub drivers (including virtual root hub drivers for host
* controllers) should ever call this.
*
* This call may not be used in a non-sleeping context.
*/
struct usb_device *usb_alloc_dev(struct usb_device *parent,
struct usb_bus *bus, unsigned port1)
{
struct usb_device *dev;
struct usb_hcd *usb_hcd = container_of(bus, struct usb_hcd, self);
unsigned root_hub = 0;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
if (!usb_get_hcd(bus_to_hcd(bus))) {
kfree(dev);
return NULL;
}
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
dev->dev.type = &usb_device_type;
dev->dev.groups = usb_device_groups;
dev->dev.dma_mask = bus->controller->dma_mask;
set_dev_node(&dev->dev, dev_to_node(bus->controller));
dev->state = USB_STATE_ATTACHED;
atomic_set(&dev->urbnum, 0);
INIT_LIST_HEAD(&dev->ep0.urb_list);
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
/* ep0 maxpacket comes later, from device descriptor */
usb_enable_endpoint(dev, &dev->ep0, true);
dev->can_submit = 1;
/* Save readable and stable topology id, distinguishing devices
* by location for diagnostics, tools, driver model, etc. The
* string is a path along hub ports, from the root. Each device's
* dev->devpath will be stable until USB is re-cabled, and hubs
* are often labeled with these port numbers. The name isn't
* as stable: bus->busnum changes easily from modprobe order,
* cardbus or pci hotplugging, and so on.
*/
if (unlikely(!parent)) {
dev->devpath[0] = '0';
dev->dev.parent = bus->controller;
dev_set_name(&dev->dev, "usb%d", bus->busnum);
root_hub = 1;
} else {
/* match any labeling on the hubs; it's one-based */
if (parent->devpath[0] == '0')
snprintf(dev->devpath, sizeof dev->devpath,
"%d", port1);
else
snprintf(dev->devpath, sizeof dev->devpath,
"%s.%d", parent->devpath, port1);
dev->dev.parent = &parent->dev;
dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
/* hub driver sets up TT records */
}
dev->portnum = port1;
dev->bus = bus;
dev->parent = parent;
INIT_LIST_HEAD(&dev->filelist);
#ifdef CONFIG_PM
mutex_init(&dev->pm_mutex);
INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work);
dev->autosuspend_delay = usb_autosuspend_delay * HZ;
dev->connect_time = jiffies;
dev->active_duration = -jiffies;
#endif
if (root_hub) /* Root hub always ok [and always wired] */
dev->authorized = 1;
else {
dev->authorized = usb_hcd->authorized_default;
dev->wusb = usb_bus_is_wusb(bus)? 1 : 0;
}
return dev;
}
/*
* usb_set_configuration - Makes a particular device setting be current
* @dev: the device whose configuration is being updated
* @configuration: the configuration being chosen.
* Context: !in_interrupt(), caller holds dev->serialize
*
* This is used to enable non-default device modes. Not all devices
* use this kind of configurability; many devices only have one
* configuration.
*
* USB device configurations may affect Linux interoperability,
* power consumption and the functionality available. For example,
* the default configuration is limited to using 100mA of bus power,
* so that when certain device functionality requires more power,
* and the device is bus powered, that functionality should be in some
* non-default device configuration. Other device modes may also be
* reflected as configuration options, such as whether two ISDN
* channels are available independently; and choosing between open
* standard device protocols (like CDC) or proprietary ones.
*
* Note that USB has an additional level of device configurability,
* associated with interfaces. That configurability is accessed using
* usb_set_interface().
*
* This call is synchronous. The calling context must be able to sleep,
* and must not hold the driver model lock for USB; usb device driver
* probe() methods may not use this routine.
*
* Returns zero on success, or else the status code returned by the
* underlying call that failed. On succesful completion, each interface
* in the original device configuration has been destroyed, and each one
* in the new configuration has been probed by all relevant usb device
* drivers currently known to the kernel.
*/
int usb_set_configuration(struct usb_device *dev, int configuration)
{
int i, ret;
struct usb_host_config *cp = NULL;
struct usb_interface **new_interfaces = NULL;
int n, nintf;
/* dev->serialize guards all config changes */
for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
if (dev->config[i].desc.bConfigurationValue == configuration) {
cp = &dev->config[i];
break;
}
}
if ((!cp && configuration != 0))
return -EINVAL;
/* The USB spec says configuration 0 means unconfigured.
* But if a device includes a configuration numbered 0,
* we will accept it as a correctly configured state.
*/
if (cp && configuration == 0)
dev_warn(&dev->dev, "config 0 descriptor??\n");
/* Allocate memory for new interfaces before doing anything else,
* so that if we run out then nothing will have changed. */
n = nintf = 0;
if (cp) {
nintf = cp->desc.bNumInterfaces;
new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
GFP_KERNEL);
if (!new_interfaces) {
dev_err(&dev->dev, "Out of memory");
return -ENOMEM;
}
for (; n < nintf; ++n) {
new_interfaces[n] = kmalloc(
sizeof(struct usb_interface),
GFP_KERNEL);
if (!new_interfaces[n]) {
dev_err(&dev->dev, "Out of memory");
ret = -ENOMEM;
free_interfaces:
while (--n >= 0)
kfree(new_interfaces[n]);
kfree(new_interfaces);
return ret;
}
}
}
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
if (dev->state != USB_STATE_ADDRESS)
usb_disable_device (dev, 1); // Skip ep0
if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
NULL, 0, HZ * USB_CTRL_SET_TIMEOUT)) < 0)
goto free_interfaces;
dev->actconfig = cp;
if (!cp)
usb_set_device_state(dev, USB_STATE_ADDRESS);
else {
usb_set_device_state(dev, USB_STATE_CONFIGURED);
/*Êý¾Ý¿¨²åÈëÍø¹Ø¼ì²âl65130 2008-09-20 start*/
if (0x12d1 == dev->descriptor.idVendor && !g_iDataCardIn)
{
g_iDataCardIn = 1;
}
/*Êý¾Ý¿¨²åÈëÍø¹Ø¼ì²âl65130 2008-09-20 end*/
/* Initialize the new interface structures and the
* hc/hcd/usbcore interface/endpoint state.
*/
for (i = 0; i < nintf; ++i) {
struct usb_interface_cache *intfc;
struct usb_interface *intf;
struct usb_host_interface *alt;
cp->interface[i] = intf = new_interfaces[i];
memset(intf, 0, sizeof(*intf));
intfc = cp->intf_cache[i];
intf->altsetting = intfc->altsetting;
intf->num_altsetting = intfc->num_altsetting;
kref_get(&intfc->ref);
alt = usb_altnum_to_altsetting(intf, 0);
/* No altsetting 0? We'll assume the first altsetting.
* We could use a GetInterface call, but if a device is
* so non-compliant that it doesn't have altsetting 0
* then I wouldn't trust its reply anyway.
*/
if (!alt)
alt = &intf->altsetting[0];
intf->cur_altsetting = alt;
usb_enable_interface(dev, intf);
intf->dev.parent = &dev->dev;
intf->dev.driver = NULL;
intf->dev.bus = &usb_bus_type;
intf->dev.dma_mask = dev->dev.dma_mask;
intf->dev.release = release_interface;
device_initialize (&intf->dev);
sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
dev->bus->busnum, dev->devpath,
configuration,
alt->desc.bInterfaceNumber);
}
kfree(new_interfaces);
/* Now that all the interfaces are set up, register them
* to trigger binding of drivers to interfaces. probe()
* routines may install different altsettings and may
* claim() any interfaces not yet bound. Many class drivers
* need that: CDC, audio, video, etc.
*/
for (i = 0; i < nintf; ++i) {
struct usb_interface *intf = cp->interface[i];
struct usb_interface_descriptor *desc;
desc = &intf->altsetting [0].desc;
dev_dbg (&dev->dev,
"adding %s (config #%d, interface %d)\n",
intf->dev.bus_id, configuration,
desc->bInterfaceNumber);
ret = device_add (&intf->dev);
if (ret != 0) {
dev_err(&dev->dev,
"device_add(%s) --> %d\n",
intf->dev.bus_id,
ret);
continue;
}
usb_create_sysfs_intf_files (intf);
}
}
return ret;
}
/**
* ccwgroup_create_from_string() - create and register a ccw group device
* @root: parent device for the new device
* @creator_id: identifier of creating driver
* @cdrv: ccw driver of slave devices
* @num_devices: number of slave devices
* @buf: buffer containing comma separated bus ids of slave devices
*
* Create and register a new ccw group device as a child of @root. Slave
* devices are obtained from the list of bus ids given in @buf and must all
* belong to @cdrv.
* Returns:
* %0 on success and an error code on failure.
* Context:
* non-atomic
*/
int ccwgroup_create_from_string(struct device *root, unsigned int creator_id,
struct ccw_driver *cdrv, int num_devices,
const char *buf)
{
struct ccwgroup_device *gdev;
int rc, i;
char tmp_bus_id[CCW_BUS_ID_SIZE];
const char *curr_buf;
gdev = kzalloc(sizeof(*gdev) + num_devices * sizeof(gdev->cdev[0]),
GFP_KERNEL);
if (!gdev)
return -ENOMEM;
atomic_set(&gdev->onoff, 0);
mutex_init(&gdev->reg_mutex);
mutex_lock(&gdev->reg_mutex);
gdev->creator_id = creator_id;
gdev->count = num_devices;
gdev->dev.bus = &ccwgroup_bus_type;
gdev->dev.parent = root;
gdev->dev.release = ccwgroup_release;
device_initialize(&gdev->dev);
curr_buf = buf;
for (i = 0; i < num_devices && curr_buf; i++) {
rc = __get_next_bus_id(&curr_buf, tmp_bus_id);
if (rc != 0)
goto error;
if (!__is_valid_bus_id(tmp_bus_id)) {
rc = -EINVAL;
goto error;
}
gdev->cdev[i] = get_ccwdev_by_busid(cdrv, tmp_bus_id);
/*
* All devices have to be of the same type in
* order to be grouped.
*/
if (!gdev->cdev[i]
|| gdev->cdev[i]->id.driver_info !=
gdev->cdev[0]->id.driver_info) {
rc = -EINVAL;
goto error;
}
/* Don't allow a device to belong to more than one group. */
spin_lock_irq(gdev->cdev[i]->ccwlock);
if (dev_get_drvdata(&gdev->cdev[i]->dev)) {
spin_unlock_irq(gdev->cdev[i]->ccwlock);
rc = -EINVAL;
goto error;
}
dev_set_drvdata(&gdev->cdev[i]->dev, gdev);
spin_unlock_irq(gdev->cdev[i]->ccwlock);
}
/* Check for sufficient number of bus ids. */
if (i < num_devices && !curr_buf) {
rc = -EINVAL;
goto error;
}
/* Check for trailing stuff. */
if (i == num_devices && strlen(curr_buf) > 0) {
rc = -EINVAL;
goto error;
}
dev_set_name(&gdev->dev, "%s", dev_name(&gdev->cdev[0]->dev));
rc = device_add(&gdev->dev);
if (rc)
goto error;
get_device(&gdev->dev);
rc = device_create_file(&gdev->dev, &dev_attr_ungroup);
if (rc) {
device_unregister(&gdev->dev);
goto error;
}
rc = __ccwgroup_create_symlinks(gdev);
if (!rc) {
mutex_unlock(&gdev->reg_mutex);
put_device(&gdev->dev);
return 0;
}
device_remove_file(&gdev->dev, &dev_attr_ungroup);
device_unregister(&gdev->dev);
error:
for (i = 0; i < num_devices; i++)
if (gdev->cdev[i]) {
spin_lock_irq(gdev->cdev[i]->ccwlock);
if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
spin_unlock_irq(gdev->cdev[i]->ccwlock);
put_device(&gdev->cdev[i]->dev);
gdev->cdev[i] = NULL;
}
mutex_unlock(&gdev->reg_mutex);
put_device(&gdev->dev);
return rc;
}
/*
* Create a new Memory Controller kobject instance,
* mc<id> under the 'mc' directory
*
* Return:
* 0 Success
* !0 Failure
*/
int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
{
int i, err;
/*
* The memory controller needs its own bus, in order to avoid
* namespace conflicts at /sys/bus/edac.
*/
mci->bus->name = kasprintf(GFP_KERNEL, "mc%d", mci->mc_idx);
if (!mci->bus->name)
return -ENOMEM;
edac_dbg(0, "creating bus %s\n", mci->bus->name);
err = bus_register(mci->bus);
if (err < 0)
return err;
/* get the /sys/devices/system/edac subsys reference */
mci->dev.type = &mci_attr_type;
device_initialize(&mci->dev);
mci->dev.parent = mci_pdev;
mci->dev.bus = mci->bus;
dev_set_name(&mci->dev, "mc%d", mci->mc_idx);
dev_set_drvdata(&mci->dev, mci);
pm_runtime_forbid(&mci->dev);
edac_dbg(0, "creating device %s\n", dev_name(&mci->dev));
err = device_add(&mci->dev);
if (err < 0) {
edac_dbg(1, "failure: create device %s\n", dev_name(&mci->dev));
bus_unregister(mci->bus);
kfree(mci->bus->name);
return err;
}
if (mci->set_sdram_scrub_rate || mci->get_sdram_scrub_rate) {
if (mci->get_sdram_scrub_rate) {
dev_attr_sdram_scrub_rate.attr.mode |= S_IRUGO;
dev_attr_sdram_scrub_rate.show = &mci_sdram_scrub_rate_show;
}
if (mci->set_sdram_scrub_rate) {
dev_attr_sdram_scrub_rate.attr.mode |= S_IWUSR;
dev_attr_sdram_scrub_rate.store = &mci_sdram_scrub_rate_store;
}
err = device_create_file(&mci->dev,
&dev_attr_sdram_scrub_rate);
if (err) {
edac_dbg(1, "failure: create sdram_scrub_rate\n");
goto fail2;
}
}
/*
* Create the dimm/rank devices
*/
for (i = 0; i < mci->tot_dimms; i++) {
struct dimm_info *dimm = mci->dimms[i];
/* Only expose populated DIMMs */
if (dimm->nr_pages == 0)
continue;
#ifdef CONFIG_EDAC_DEBUG
edac_dbg(1, "creating dimm%d, located at ", i);
if (edac_debug_level >= 1) {
int lay;
for (lay = 0; lay < mci->n_layers; lay++)
printk(KERN_CONT "%s %d ",
edac_layer_name[mci->layers[lay].type],
dimm->location[lay]);
printk(KERN_CONT "\n");
}
#endif
err = edac_create_dimm_object(mci, dimm, i);
if (err) {
edac_dbg(1, "failure: create dimm %d obj\n", i);
goto fail;
}
}
#ifdef CONFIG_EDAC_LEGACY_SYSFS
err = edac_create_csrow_objects(mci);
if (err < 0)
goto fail;
#endif
#ifdef CONFIG_EDAC_DEBUG
edac_create_debug_nodes(mci);
#endif
return 0;
fail:
for (i--; i >= 0; i--) {
struct dimm_info *dimm = mci->dimms[i];
if (dimm->nr_pages == 0)
continue;
device_unregister(&dimm->dev);
}
fail2:
device_unregister(&mci->dev);
bus_unregister(mci->bus);
kfree(mci->bus->name);
return err;
}
static int msm72k_probe(struct platform_device *pdev)
{
struct resource *res;
struct usb_info *ui;
int irq;
int ret;
INFO("msm72k_probe\n");
ui = kzalloc(sizeof(struct usb_info), GFP_KERNEL);
if (!ui)
return -ENOMEM;
spin_lock_init(&ui->lock);
ui->pdev = pdev;
if (pdev->dev.platform_data) {
struct msm_hsusb_platform_data *pdata = pdev->dev.platform_data;
ui->phy_reset = pdata->phy_reset;
ui->phy_init_seq = pdata->phy_init_seq;
ui->usb_connected = pdata->usb_connected;
}
irq = platform_get_irq(pdev, 0);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res || (irq < 0))
return usb_free(ui, -ENODEV);
ui->addr = ioremap(res->start, 4096);
if (!ui->addr)
return usb_free(ui, -ENOMEM);
ui->buf = dma_alloc_coherent(&pdev->dev, 4096, &ui->dma, GFP_KERNEL);
if (!ui->buf)
return usb_free(ui, -ENOMEM);
ui->pool = dma_pool_create("msm72k_udc", NULL, 32, 32, 0);
if (!ui->pool)
return usb_free(ui, -ENOMEM);
INFO("msm72k_probe() io=%p, irq=%d, dma=%p(%x)\n",
ui->addr, irq, ui->buf, ui->dma);
ui->clk = clk_get(&pdev->dev, "usb_hs_clk");
if (IS_ERR(ui->clk))
return usb_free(ui, PTR_ERR(ui->clk));
ui->pclk = clk_get(&pdev->dev, "usb_hs_pclk");
if (IS_ERR(ui->pclk))
return usb_free(ui, PTR_ERR(ui->pclk));
ui->otgclk = clk_get(&pdev->dev, "usb_otg_clk");
if (IS_ERR(ui->otgclk))
ui->otgclk = NULL;
ui->coreclk = clk_get(&pdev->dev, "usb_hs_core_clk");
if (IS_ERR(ui->coreclk))
ui->coreclk = NULL;
ui->ebi1clk = clk_get(NULL, "ebi1_clk");
if (IS_ERR(ui->ebi1clk))
return usb_free(ui, PTR_ERR(ui->ebi1clk));
/* clear interrupts before requesting irq */
if (ui->coreclk)
clk_enable(ui->coreclk);
clk_enable(ui->clk);
clk_enable(ui->pclk);
if (ui->otgclk)
clk_enable(ui->otgclk);
writel(0, USB_USBINTR);
writel(0, USB_OTGSC);
if (ui->coreclk)
clk_disable(ui->coreclk);
if (ui->otgclk)
clk_disable(ui->otgclk);
clk_disable(ui->pclk);
clk_disable(ui->clk);
ret = request_irq(irq, usb_interrupt, 0, pdev->name, ui);
if (ret)
return usb_free(ui, ret);
enable_irq_wake(irq);
ui->irq = irq;
ui->gadget.ops = &msm72k_ops;
ui->gadget.is_dualspeed = 1;
device_initialize(&ui->gadget.dev);
dev_set_name(&ui->gadget.dev, "gadget");
ui->gadget.dev.parent = &pdev->dev;
ui->gadget.dev.dma_mask = pdev->dev.dma_mask;
the_usb_info = ui;
usb_debugfs_init(ui);
usb_prepare(ui);
return 0;
}
int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv)
{
struct usbhsg_gpriv *gpriv;
struct usbhsg_uep *uep;
struct device *dev = usbhs_priv_to_dev(priv);
int pipe_size = usbhs_get_dparam(priv, pipe_size);
int i;
int ret;
gpriv = kzalloc(sizeof(struct usbhsg_gpriv), GFP_KERNEL);
if (!gpriv) {
dev_err(dev, "Could not allocate gadget priv\n");
return -ENOMEM;
}
uep = kzalloc(sizeof(struct usbhsg_uep) * pipe_size, GFP_KERNEL);
if (!uep) {
dev_err(dev, "Could not allocate ep\n");
ret = -ENOMEM;
goto usbhs_mod_gadget_probe_err_gpriv;
}
/*
* CAUTION
*
* There is no guarantee that it is possible to access usb module here.
* Don't accesses to it.
* The accesse will be enable after "usbhsg_start"
*/
/*
* register itself
*/
usbhs_mod_register(priv, &gpriv->mod, USBHS_GADGET);
/* init gpriv */
gpriv->mod.name = "gadget";
gpriv->mod.start = usbhsg_start;
gpriv->mod.stop = usbhsg_stop;
gpriv->uep = uep;
gpriv->uep_size = pipe_size;
usbhsg_status_init(gpriv);
/*
* init gadget
*/
device_initialize(&gpriv->gadget.dev);
dev_set_name(&gpriv->gadget.dev, "gadget");
gpriv->gadget.dev.parent = dev;
gpriv->gadget.name = "renesas_usbhs_udc";
gpriv->gadget.ops = &usbhsg_gadget_ops;
gpriv->gadget.is_dualspeed = 1;
INIT_LIST_HEAD(&gpriv->gadget.ep_list);
/*
* init usb_ep
*/
usbhsg_for_each_uep_with_dcp(uep, gpriv, i) {
uep->gpriv = gpriv;
snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i);
uep->ep.name = uep->ep_name;
uep->ep.ops = &usbhsg_ep_ops;
INIT_LIST_HEAD(&uep->ep.ep_list);
INIT_LIST_HEAD(&uep->list);
/* init DCP */
if (usbhsg_is_dcp(uep)) {
gpriv->gadget.ep0 = &uep->ep;
uep->ep.maxpacket = 64;
}
/* init normal pipe */
else {
uep->ep.maxpacket = 512;
list_add_tail(&uep->ep.ep_list, &gpriv->gadget.ep_list);
}
}
/**ltl
功能:分配usb设备对象
参数:parent ->
bus ->
port1 ->
返回值:
*/
struct usb_device *
usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
{
struct usb_device *dev;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
//增加usb引用计数器
bus = usb_bus_get(bus);
if (!bus) {
kfree(dev);
return NULL;
}
//总线驱动模型的设备
device_initialize(&dev->dev);//初始化
dev->dev.bus = &usb_bus_type;//设备总线类型
dev->dev.dma_mask = bus->controller->dma_mask;//DMA俺码
dev->dev.driver_data = &usb_generic_driver_data;
/*
dev->dev.driver字段设置成usb_generic_driver主机目的是:使此设备不与具体的驱动程序相关联。这一点与接口usb_interface.dev.driver最大区别。
设置此字段值后，当在函数usb_new_device()调用device_add()后，驱动架构会执行usb_bus_type.match(usb_device_match),
在usb_device_match中判定当前的驱动对象是否是usb_generic_driver,如果是则返回0
*/
dev->dev.driver = &usb_generic_driver;
dev->dev.release = usb_release_dev;
dev->state = USB_STATE_ATTACHED;
//设置usb_device的端口0的参数
INIT_LIST_HEAD(&dev->ep0.urb_list);
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
/* ep0 maxpacket comes later, from device descriptor */
dev->ep_in[0] = dev->ep_out[0] = &dev->ep0;//端点0可输入亦可输出
/* Save readable and stable topology id, distinguishing devices
* by location for diagnostics, tools, driver model, etc. The
* string is a path along hub ports, from the root. Each device's
* dev->devpath will be stable until USB is re-cabled, and hubs
* are often labeled with these port numbers. The bus_id isn't
* as stable: bus->busnum changes easily from modprobe order,
* cardbus or pci hotplugging, and so on.
*/
if (unlikely (!parent)) {
dev->devpath [0] = '0';
dev->dev.parent = bus->controller;
sprintf (&dev->dev.bus_id[0], "usb%d", bus->busnum);
} else {
/* match any labeling on the hubs; it's one-based */
if (parent->devpath [0] == '0')
snprintf (dev->devpath, sizeof dev->devpath,
"%d", port1);
else
snprintf (dev->devpath, sizeof dev->devpath,
"%s.%d", parent->devpath, port1);
dev->dev.parent = &parent->dev;
sprintf (&dev->dev.bus_id[0], "%d-%s",
bus->busnum, dev->devpath);
/* hub driver sets up TT records */
}
dev->portnum = port1;//usb设备号
dev->bus = bus;//此usb设备所属总线(连接此设备的上行总线)
dev->parent = parent;//此usb设备的父设备。对根Hub，此域为NULL
INIT_LIST_HEAD(&dev->filelist);//<usbfs文件系统用到>
return dev;
}
/**
* usb_alloc_dev - usb device constructor (usbcore-internal)
* @parent: hub to which device is connected; null to allocate a root hub
* @bus: bus used to access the device
* @port1: one-based index of port; ignored for root hubs
* Context: !in_interrupt()
*
* Only hub drivers (including virtual root hub drivers for host
* controllers) should ever call this.
*
* This call may not be used in a non-sleeping context.
*/
struct usb_device *
usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
{
struct usb_device *dev;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
if (!usb_get_hcd(bus_to_hcd(bus))) {
kfree(dev);
return NULL;
}
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
dev->dev.type = &usb_device_type;
dev->dev.dma_mask = bus->controller->dma_mask;
dev->state = USB_STATE_ATTACHED;
INIT_LIST_HEAD(&dev->ep0.urb_list);
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
/* ep0 maxpacket comes later, from device descriptor */
dev->ep_in[0] = dev->ep_out[0] = &dev->ep0;
/* Save readable and stable topology id, distinguishing devices
* by location for diagnostics, tools, driver model, etc. The
* string is a path along hub ports, from the root. Each device's
* dev->devpath will be stable until USB is re-cabled, and hubs
* are often labeled with these port numbers. The bus_id isn't
* as stable: bus->busnum changes easily from modprobe order,
* cardbus or pci hotplugging, and so on.
*/
if (unlikely(!parent)) {
dev->devpath[0] = '0';
dev->dev.parent = bus->controller;
sprintf(&dev->dev.bus_id[0], "usb%d", bus->busnum);
} else {
/* match any labeling on the hubs; it's one-based */
if (parent->devpath[0] == '0')
snprintf(dev->devpath, sizeof dev->devpath,
"%d", port1);
else
snprintf(dev->devpath, sizeof dev->devpath,
"%s.%d", parent->devpath, port1);
dev->dev.parent = &parent->dev;
sprintf(&dev->dev.bus_id[0], "%d-%s",
bus->busnum, dev->devpath);
/* hub driver sets up TT records */
}
dev->portnum = port1;
dev->bus = bus;
dev->parent = parent;
INIT_LIST_HEAD(&dev->filelist);
#ifdef CONFIG_PM
mutex_init(&dev->pm_mutex);
INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work);
dev->autosuspend_delay = usb_autosuspend_delay * HZ;
#endif
return dev;
}
static int __init migor_devices_setup(void)
{
struct clk *video_clk;
/* register board specific self-refresh code */
sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
&migor_sdram_enter_start,
&migor_sdram_enter_end,
&migor_sdram_leave_start,
&migor_sdram_leave_end);
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
/* Let D11 LED show STATUS0 */
gpio_request(GPIO_FN_STATUS0, NULL);
/* Lit D12 LED show PDSTATUS */
gpio_request(GPIO_FN_PDSTATUS, NULL);
/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
gpio_request(GPIO_FN_IRQ0, NULL);
__raw_writel(0x00003400, BSC_CS4BCR);
__raw_writel(0x00110080, BSC_CS4WCR);
/* KEYSC */
gpio_request(GPIO_FN_KEYOUT0, NULL);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT2, NULL);
gpio_request(GPIO_FN_KEYOUT3, NULL);
gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
gpio_request(GPIO_FN_KEYIN1, NULL);
gpio_request(GPIO_FN_KEYIN2, NULL);
gpio_request(GPIO_FN_KEYIN3, NULL);
gpio_request(GPIO_FN_KEYIN4, NULL);
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
/* NAND Flash */
gpio_request(GPIO_FN_CS6A_CE2B, NULL);
__raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
gpio_request(GPIO_PTA1, NULL);
gpio_direction_input(GPIO_PTA1);
/* SDHI */
gpio_request(GPIO_FN_SDHICD, NULL);
gpio_request(GPIO_FN_SDHIWP, NULL);
gpio_request(GPIO_FN_SDHID3, NULL);
gpio_request(GPIO_FN_SDHID2, NULL);
gpio_request(GPIO_FN_SDHID1, NULL);
gpio_request(GPIO_FN_SDHID0, NULL);
gpio_request(GPIO_FN_SDHICMD, NULL);
gpio_request(GPIO_FN_SDHICLK, NULL);
/* Touch Panel */
gpio_request(GPIO_FN_IRQ6, NULL);
/* LCD Panel */
#ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
gpio_request(GPIO_FN_LCDD15, NULL);
gpio_request(GPIO_FN_LCDD14, NULL);
gpio_request(GPIO_FN_LCDD13, NULL);
gpio_request(GPIO_FN_LCDD12, NULL);
gpio_request(GPIO_FN_LCDD11, NULL);
gpio_request(GPIO_FN_LCDD10, NULL);
gpio_request(GPIO_FN_LCDD8, NULL);
gpio_request(GPIO_FN_LCDD7, NULL);
gpio_request(GPIO_FN_LCDD6, NULL);
gpio_request(GPIO_FN_LCDD5, NULL);
gpio_request(GPIO_FN_LCDD4, NULL);
gpio_request(GPIO_FN_LCDD3, NULL);
gpio_request(GPIO_FN_LCDD2, NULL);
gpio_request(GPIO_FN_LCDD1, NULL);
gpio_request(GPIO_FN_LCDRS, NULL);
gpio_request(GPIO_FN_LCDCS, NULL);
gpio_request(GPIO_FN_LCDRD, NULL);
gpio_request(GPIO_FN_LCDWR, NULL);
gpio_request(GPIO_PTH2, NULL); /* LCD_DON */
gpio_direction_output(GPIO_PTH2, 1);
#endif
#ifdef CONFIG_SH_MIGOR_RTA_WVGA /* LCDC - WVGA - Enable RGB Interface signals */
gpio_request(GPIO_FN_LCDD15, NULL);
gpio_request(GPIO_FN_LCDD14, NULL);
gpio_request(GPIO_FN_LCDD13, NULL);
gpio_request(GPIO_FN_LCDD12, NULL);
gpio_request(GPIO_FN_LCDD11, NULL);
gpio_request(GPIO_FN_LCDD10, NULL);
gpio_request(GPIO_FN_LCDD9, NULL);
gpio_request(GPIO_FN_LCDD8, NULL);
gpio_request(GPIO_FN_LCDD7, NULL);
gpio_request(GPIO_FN_LCDD6, NULL);
gpio_request(GPIO_FN_LCDD5, NULL);
gpio_request(GPIO_FN_LCDD4, NULL);
gpio_request(GPIO_FN_LCDD3, NULL);
gpio_request(GPIO_FN_LCDD2, NULL);
gpio_request(GPIO_FN_LCDD1, NULL);
gpio_request(GPIO_FN_LCDD0, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
gpio_request(GPIO_FN_LCDVEPWC, NULL);
gpio_request(GPIO_FN_LCDVCPWC, NULL);
gpio_request(GPIO_FN_LCDVSYN, NULL);
gpio_request(GPIO_FN_LCDHSYN, NULL);
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDON, NULL);
#endif
/* CEU */
gpio_request(GPIO_FN_VIO_CLK2, NULL);
gpio_request(GPIO_FN_VIO_VD2, NULL);
gpio_request(GPIO_FN_VIO_HD2, NULL);
gpio_request(GPIO_FN_VIO_FLD, NULL);
gpio_request(GPIO_FN_VIO_CKO, NULL);
gpio_request(GPIO_FN_VIO_D15, NULL);
gpio_request(GPIO_FN_VIO_D14, NULL);
gpio_request(GPIO_FN_VIO_D13, NULL);
gpio_request(GPIO_FN_VIO_D12, NULL);
gpio_request(GPIO_FN_VIO_D11, NULL);
gpio_request(GPIO_FN_VIO_D10, NULL);
gpio_request(GPIO_FN_VIO_D9, NULL);
gpio_request(GPIO_FN_VIO_D8, NULL);
__raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
/* SIU: Port B */
gpio_request(GPIO_FN_SIUBOLR, NULL);
gpio_request(GPIO_FN_SIUBOBT, NULL);
gpio_request(GPIO_FN_SIUBISLD, NULL);
gpio_request(GPIO_FN_SIUBOSLD, NULL);
gpio_request(GPIO_FN_SIUMCKB, NULL);
/*
* The original driver sets SIUB OLR/OBT, ILR/IBT, and SIUA OLR/OBT to
* output. Need only SIUB, set to output for master mode (table 34.2)
*/
__raw_writew(__raw_readw(PORT_MSELCRA) | 1, PORT_MSELCRA);
/*
* Use 10 MHz VIO_CKO instead of 24 MHz to work around signal quality
* issues on Panel Board V2.1.
*/
video_clk = clk_get(NULL, "video_clk");
if (!IS_ERR(video_clk)) {
clk_set_rate(video_clk, clk_round_rate(video_clk, 10000000));
clk_put(video_clk);
}
/* Add a clock alias for ov7725 xclk source. */
clk_add_alias(NULL, "0-0021", "video_clk", NULL);
/* Register GPIOs for video sources. */
gpiod_add_lookup_table(&ov7725_gpios);
gpiod_add_lookup_table(&tw9910_gpios);
i2c_register_board_info(0, migor_i2c_devices,
ARRAY_SIZE(migor_i2c_devices));
/* Initialize CEU platform device separately to map memory first */
device_initialize(&migor_ceu_device.dev);
arch_setup_pdev_archdata(&migor_ceu_device);
dma_declare_coherent_memory(&migor_ceu_device.dev,
ceu_dma_membase, ceu_dma_membase,
ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1,
DMA_MEMORY_EXCLUSIVE);
platform_device_add(&migor_ceu_device);
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
static int zynq_rpmsg_initialize(struct platform_device *pdev)
{
int ret = 0;
int index;
struct virtio_device *virtio_dev;
/* Register ipi handler. */
ret = set_ipi_handler(zynq_rpmsg_p->vring0, ipi_handler,
"Firmware kick");
if (ret) {
dev_err(&pdev->dev, "IPI handler already registered\n");
return -ENODEV;
}
/* Initialize work. */
INIT_WORK(&zynq_rpmsg_work, handle_event);
/* Memory allocations for vrings. */
ret = dma_declare_coherent_memory(&pdev->dev,
zynq_rpmsg_p->mem_start,
zynq_rpmsg_p->mem_start,
zynq_rpmsg_p->mem_end -
zynq_rpmsg_p->mem_start + 1,
DMA_MEMORY_IO);
if (!ret) {
dev_err(&pdev->dev, "dma_declare_coherent_memory failed\n");
return -ENODEV;
}
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret) {
dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret);
return -ENODEV;
}
/* Initialize a mid-level device. Needed because of bad data structure
* handling and assumptions within the virtio rpmsg bus. We are doing it
* to just make sure that the virtio device has a parent device which
* then itself has a parent in the form of the platform device. */
device_initialize(&(zynq_rpmsg_p->mid_dev));
zynq_rpmsg_p->mid_dev.parent = &(pdev->dev);
zynq_rpmsg_p->mid_dev.type = &mid_level_type;
index = ida_simple_get(&rpmsg_zynq_dev_index, 0, 0, GFP_KERNEL);
if (index < 0) {
put_device(&(zynq_rpmsg_p->mid_dev));
return -ENODEV;
}
dev_set_name(&(zynq_rpmsg_p->mid_dev), "rpmsg_mid%d", index);
device_add(&(zynq_rpmsg_p->mid_dev));
/* Setup the virtio device structure. */
virtio_dev = &(zynq_rpmsg_p->virtio_dev);
virtio_dev->id.device = zynq_rpmsg_p->virtioid;
virtio_dev->config = &zynq_rpmsg_virtio_config_ops;
virtio_dev->dev.parent = &(zynq_rpmsg_p->mid_dev);
virtio_dev->dev.release = zynq_rpmsg_vdev_release;
/* Register the virtio device. */
ret = register_virtio_device(virtio_dev);
dev_info(&(zynq_rpmsg_platform->dev), "virtio device registered \r\n");
return ret;
}
/*
* When a device set is registered, all eeproms must be read
* and all FRUs must be parsed
*/
int fmc_device_register_n_gw(struct fmc_device **devs, int n,
struct fmc_gateware *gw)
{
struct fmc_device *fmc, **devarray;
uint32_t device_id;
int i, ret = 0;
if (n < 1)
return 0;
/* Check the version of the first data structure (function prints) */
if (fmc_check_version(devs[0]->version, devs[0]->carrier_name))
return -EINVAL;
devarray = kmemdup(devs, n * sizeof(*devs), GFP_KERNEL);
if (!devarray)
return -ENOMEM;
/* Make all other checks before continuing, for all devices */
for (i = 0; i < n; i++) {
fmc = devarray[i];
if (!fmc->hwdev) {
pr_err("%s: device nr. %i has no hwdev pointer\n",
__func__, i);
ret = -EINVAL;
break;
}
if (fmc->flags & FMC_DEVICE_NO_MEZZANINE) {
dev_info(fmc->hwdev, "absent mezzanine in slot %d\n",
fmc->slot_id);
continue;
}
if (!fmc->eeprom) {
dev_err(fmc->hwdev, "no eeprom provided for slot %i\n",
fmc->slot_id);
ret = -EINVAL;
}
if (!fmc->eeprom_addr) {
dev_err(fmc->hwdev, "no eeprom_addr for slot %i\n",
fmc->slot_id);
ret = -EINVAL;
}
if (!fmc->carrier_name || !fmc->carrier_data ||
!fmc->device_id) {
dev_err(fmc->hwdev,
"device nr %i: carrier name, "
"data or dev_id not set\n", i);
ret = -EINVAL;
}
if (ret)
break;
}
if (ret) {
kfree(devarray);
return ret;
}
/* Validation is ok. Now init and register the devices */
for (i = 0; i < n; i++) {
fmc = devarray[i];
fmc->nr_slots = n; /* each slot must know how many are there */
fmc->devarray = devarray;
device_initialize(&fmc->dev);
fmc->dev.release = fmc_release;
fmc->dev.parent = fmc->hwdev;
/* Fill the identification stuff (may fail) */
fmc_fill_id_info(fmc);
fmc->dev.bus = &fmc_bus_type;
/* Name from mezzanine info or carrier info. Or 0,1,2.. */
device_id = fmc->device_id;
if (!fmc->mezzanine_name)
dev_set_name(&fmc->dev, "fmc-%04x", device_id);
else
dev_set_name(&fmc->dev, "%s-%04x", fmc->mezzanine_name,
device_id);
if (gw) {
/*
* The carrier already know the bitstream to load
* for this set of FMC mezzanines.
*/
ret = fmc->op->reprogram_raw(fmc, NULL,
gw->bitstream, gw->len);
if (ret) {
dev_warn(fmc->hwdev,
"Invalid gateware for FMC mezzanine\n");
goto out;
}
}
ret = device_add(&fmc->dev);
if (ret < 0) {
dev_err(fmc->hwdev, "Slot %i: Failed in registering "
"\"%s\"\n", fmc->slot_id, fmc->dev.kobj.name);
goto out;
}
ret = sysfs_create_bin_file(&fmc->dev.kobj, &fmc_eeprom_attr);
if (ret < 0) {
dev_err(&fmc->dev, "Failed in registering eeprom\n");
goto out1;
}
/* This device went well, give information to the user */
fmc_dump_eeprom(fmc);
fmc_debug_init(fmc);
}
return 0;
out1:
device_del(&fmc->dev);
out:
kfree(devarray);
for (i--; i >= 0; i--) {
fmc_debug_exit(devs[i]);
sysfs_remove_bin_file(&devs[i]->dev.kobj, &fmc_eeprom_attr);
device_del(&devs[i]->dev);
fmc_free_id_info(devs[i]);
put_device(&devs[i]->dev);
}
return ret;
}
/*
* Create a new Memory Controller kobject instance,
* mc<id> under the 'mc' directory
*
* Return:
* 0 Success
* !0 Failure
*/
int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
const struct attribute_group **groups)
{
char *name;
int i, err;
/*
* The memory controller needs its own bus, in order to avoid
* namespace conflicts at /sys/bus/edac.
*/
name = kasprintf(GFP_KERNEL, "mc%d", mci->mc_idx);
if (!name)
return -ENOMEM;
mci->bus->name = name;
edac_dbg(0, "creating bus %s\n", mci->bus->name);
err = bus_register(mci->bus);
if (err < 0) {
kfree(name);
return err;
}
/* get the /sys/devices/system/edac subsys reference */
mci->dev.type = &mci_attr_type;
device_initialize(&mci->dev);
mci->dev.parent = mci_pdev;
mci->dev.bus = mci->bus;
mci->dev.groups = groups;
dev_set_name(&mci->dev, "mc%d", mci->mc_idx);
dev_set_drvdata(&mci->dev, mci);
pm_runtime_forbid(&mci->dev);
edac_dbg(0, "creating device %s\n", dev_name(&mci->dev));
err = device_add(&mci->dev);
if (err < 0) {
edac_dbg(1, "failure: create device %s\n", dev_name(&mci->dev));
goto fail_unregister_bus;
}
/*
* Create the dimm/rank devices
*/
for (i = 0; i < mci->tot_dimms; i++) {
struct dimm_info *dimm = mci->dimms[i];
/* Only expose populated DIMMs */
if (!dimm->nr_pages)
continue;
#ifdef CONFIG_EDAC_DEBUG
edac_dbg(1, "creating dimm%d, located at ", i);
if (edac_debug_level >= 1) {
int lay;
for (lay = 0; lay < mci->n_layers; lay++)
printk(KERN_CONT "%s %d ",
edac_layer_name[mci->layers[lay].type],
dimm->location[lay]);
printk(KERN_CONT "\n");
}
#endif
err = edac_create_dimm_object(mci, dimm, i);
if (err) {
edac_dbg(1, "failure: create dimm %d obj\n", i);
goto fail_unregister_dimm;
}
}
#ifdef CONFIG_EDAC_LEGACY_SYSFS
err = edac_create_csrow_objects(mci);
if (err < 0)
goto fail_unregister_dimm;
#endif
edac_create_debugfs_nodes(mci);
return 0;
fail_unregister_dimm:
for (i--; i >= 0; i--) {
struct dimm_info *dimm = mci->dimms[i];
if (!dimm->nr_pages)
continue;
device_unregister(&dimm->dev);
}
device_unregister(&mci->dev);
fail_unregister_bus:
bus_unregister(mci->bus);
kfree(name);
return err;
}
struct usb_device *usb_alloc_dev(struct usb_device *parent,
struct usb_bus *bus, unsigned port1)
{
struct usb_device *dev;
struct usb_hcd *usb_hcd = container_of(bus, struct usb_hcd, self);
unsigned root_hub = 0;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
if (!usb_get_hcd(bus_to_hcd(bus))) {
kfree(dev);
return NULL;
}
if (usb_hcd->driver->alloc_dev && parent &&
!usb_hcd->driver->alloc_dev(usb_hcd, dev)) {
usb_put_hcd(bus_to_hcd(bus));
kfree(dev);
return NULL;
}
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
dev->dev.type = &usb_device_type;
dev->dev.groups = usb_device_groups;
dev->dev.dma_mask = bus->controller->dma_mask;
set_dev_node(&dev->dev, dev_to_node(bus->controller));
dev->state = USB_STATE_ATTACHED;
atomic_set(&dev->urbnum, 0);
INIT_LIST_HEAD(&dev->ep0.urb_list);
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
usb_enable_endpoint(dev, &dev->ep0, false);
dev->can_submit = 1;
if (unlikely(!parent)) {
dev->devpath[0] = '0';
dev->route = 0;
dev->dev.parent = bus->controller;
dev_set_name(&dev->dev, "usb%d", bus->busnum);
root_hub = 1;
} else {
if (parent->devpath[0] == '0') {
snprintf(dev->devpath, sizeof dev->devpath,
"%d", port1);
dev->route = 0;
} else {
snprintf(dev->devpath, sizeof dev->devpath,
"%s.%d", parent->devpath, port1);
if (port1 < 15)
dev->route = parent->route +
(port1 << ((parent->level - 1)*4));
else
dev->route = parent->route +
(15 << ((parent->level - 1)*4));
}
dev->dev.parent = &parent->dev;
dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
}
dev->portnum = port1;
dev->bus = bus;
dev->parent = parent;
INIT_LIST_HEAD(&dev->filelist);
#ifdef CONFIG_PM
mutex_init(&dev->pm_mutex);
INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work);
INIT_WORK(&dev->autoresume, usb_autoresume_work);
dev->autosuspend_delay = usb_autosuspend_delay * HZ;
dev->connect_time = jiffies;
dev->active_duration = -jiffies;
#endif
if (root_hub)
dev->authorized = 1;
else {
dev->authorized = usb_hcd->authorized_default;
dev->wusb = usb_bus_is_wusb(bus)? 1 : 0;
}
return dev;
}
static int __init iio_sysfs_trig_init(void)
{
device_initialize(&iio_sysfs_trig_dev);
dev_set_name(&iio_sysfs_trig_dev, "iio_sysfs_trigger");
return device_add(&iio_sysfs_trig_dev);
}
/*
* usb_set_configuration - Makes a particular device setting be current
* @dev: the device whose configuration is being updated
* @configuration: the configuration being chosen.
* Context: !in_interrupt(), caller owns the device lock
*
* This is used to enable non-default device modes. Not all devices
* use this kind of configurability; many devices only have one
* configuration.
*
* @configuration is the value of the configuration to be installed.
* According to the USB spec (e.g. section 9.1.1.5), configuration values
* must be non-zero; a value of zero indicates that the device in
* unconfigured. However some devices erroneously use 0 as one of their
* configuration values. To help manage such devices, this routine will
* accept @configuration = -1 as indicating the device should be put in
* an unconfigured state.
*
* USB device configurations may affect Linux interoperability,
* power consumption and the functionality available. For example,
* the default configuration is limited to using 100mA of bus power,
* so that when certain device functionality requires more power,
* and the device is bus powered, that functionality should be in some
* non-default device configuration. Other device modes may also be
* reflected as configuration options, such as whether two ISDN
* channels are available independently; and choosing between open
* standard device protocols (like CDC) or proprietary ones.
*
* Note that USB has an additional level of device configurability,
* associated with interfaces. That configurability is accessed using
* usb_set_interface().
*
* This call is synchronous. The calling context must be able to sleep,
* must own the device lock, and must not hold the driver model's USB
* bus rwsem; usb device driver probe() methods cannot use this routine.
*
* Returns zero on success, or else the status code returned by the
* underlying call that failed. On successful completion, each interface
* in the original device configuration has been destroyed, and each one
* in the new configuration has been probed by all relevant usb device
* drivers currently known to the kernel.
*/
int usb_set_configuration(struct usb_device *dev, int configuration)
{
int i, ret;
struct usb_host_config *cp = NULL;
struct usb_interface **new_interfaces = NULL;
int n, nintf;
if (configuration == -1)
configuration = 0;
else {
for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
if (dev->config[i].desc.bConfigurationValue ==
configuration) {
cp = &dev->config[i];
break;
}
}
}
if ((!cp && configuration != 0))
return -EINVAL;
/* The USB spec says configuration 0 means unconfigured.
* But if a device includes a configuration numbered 0,
* we will accept it as a correctly configured state.
* Use -1 if you really want to unconfigure the device.
*/
if (cp && configuration == 0)
dev_warn(&dev->dev, "config 0 descriptor??\n");
/* Allocate memory for new interfaces before doing anything else,
* so that if we run out then nothing will have changed. */
n = nintf = 0;
if (cp) {
nintf = cp->desc.bNumInterfaces;
new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
GFP_KERNEL);
if (!new_interfaces) {
dev_err(&dev->dev, "Out of memory");
return -ENOMEM;
}
for (; n < nintf; ++n) {
new_interfaces[n] = kzalloc(
sizeof(struct usb_interface),
GFP_KERNEL);
if (!new_interfaces[n]) {
dev_err(&dev->dev, "Out of memory");
ret = -ENOMEM;
free_interfaces:
while (--n >= 0)
kfree(new_interfaces[n]);
kfree(new_interfaces);
return ret;
}
}
i = dev->bus_mA - cp->desc.bMaxPower * 2;
if (i < 0)
dev_warn(&dev->dev, "new config #%d exceeds power "
"limit by %dmA\n",
configuration, -i);
}
/* Wake up the device so we can send it the Set-Config request */
ret = usb_autoresume_device(dev);
if (ret)
goto free_interfaces;
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
if (dev->state != USB_STATE_ADDRESS)
usb_disable_device (dev, 1); // Skip ep0
if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0) {
/* All the old state is gone, so what else can we do?
* The device is probably useless now anyway.
*/
cp = NULL;
}
dev->actconfig = cp;
if (!cp) {
usb_set_device_state(dev, USB_STATE_ADDRESS);
usb_autosuspend_device(dev);
goto free_interfaces;
}
usb_set_device_state(dev, USB_STATE_CONFIGURED);
/* Initialize the new interface structures and the
* hc/hcd/usbcore interface/endpoint state.
*/
for (i = 0; i < nintf; ++i) {
struct usb_interface_cache *intfc;
struct usb_interface *intf;
struct usb_host_interface *alt;
cp->interface[i] = intf = new_interfaces[i];
intfc = cp->intf_cache[i];
intf->altsetting = intfc->altsetting;
intf->num_altsetting = intfc->num_altsetting;
kref_get(&intfc->ref);
alt = usb_altnum_to_altsetting(intf, 0);
/* No altsetting 0? We'll assume the first altsetting.
* We could use a GetInterface call, but if a device is
* so non-compliant that it doesn't have altsetting 0
* then I wouldn't trust its reply anyway.
*/
if (!alt)
alt = &intf->altsetting[0];
intf->cur_altsetting = alt;
usb_enable_interface(dev, intf);
intf->dev.parent = &dev->dev;
intf->dev.driver = NULL;
intf->dev.bus = &usb_bus_type;
intf->dev.dma_mask = dev->dev.dma_mask;
intf->dev.release = release_interface;
device_initialize (&intf->dev);
mark_quiesced(intf);
sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
dev->bus->busnum, dev->devpath,
configuration, alt->desc.bInterfaceNumber);
}
kfree(new_interfaces);
if (cp->string == NULL)
cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
/* Now that all the interfaces are set up, register them
* to trigger binding of drivers to interfaces. probe()
* routines may install different altsettings and may
* claim() any interfaces not yet bound. Many class drivers
* need that: CDC, audio, video, etc.
*/
for (i = 0; i < nintf; ++i) {
struct usb_interface *intf = cp->interface[i];
dev_dbg (&dev->dev,
"adding %s (config #%d, interface %d)\n",
intf->dev.bus_id, configuration,
intf->cur_altsetting->desc.bInterfaceNumber);
ret = device_add (&intf->dev);
if (ret != 0) {
dev_err(&dev->dev, "device_add(%s) --> %d\n",
intf->dev.bus_id, ret);
continue;
}
usb_create_sysfs_intf_files (intf);
}
usb_autosuspend_device(dev);
return 0;
}
/**
* usb_alloc_dev - usb device constructor (usbcore-internal)
* @parent: hub to which device is connected; null to allocate a root hub
* @bus: bus used to access the device
* @port1: one-based index of port; ignored for root hubs
* Context: !in_interrupt()
*
* Only hub drivers (including virtual root hub drivers for host
* controllers) should ever call this.
*
* This call may not be used in a non-sleeping context.
*
* Return: On success, a pointer to the allocated usb device. %NULL on
* failure.
*/
struct usb_device *usb_alloc_dev(struct usb_device *parent,
struct usb_bus *bus, unsigned port1)
{
struct usb_device *dev;
struct usb_hcd *usb_hcd = bus_to_hcd(bus);
unsigned root_hub = 0;
unsigned raw_port = port1;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
if (!usb_get_hcd(usb_hcd)) {
kfree(dev);
return NULL;
}
/* Root hubs aren't true devices, so don't allocate HCD resources */
if (usb_hcd->driver->alloc_dev && parent &&
!usb_hcd->driver->alloc_dev(usb_hcd, dev)) {
usb_put_hcd(bus_to_hcd(bus));
kfree(dev);
return NULL;
}
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
dev->dev.type = &usb_device_type;
dev->dev.groups = usb_device_groups;
/*
* Fake a dma_mask/offset for the USB device:
* We cannot really use the dma-mapping API (dma_alloc_* and
* dma_map_*) for USB devices but instead need to use
* usb_alloc_coherent and pass data in 'urb's, but some subsystems
* manually look into the mask/offset pair to determine whether
* they need bounce buffers.
* Note: calling dma_set_mask() on a USB device would set the
* mask for the entire HCD, so don't do that.
*/
dev->dev.dma_mask = bus->sysdev->dma_mask;
dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset;
set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
dev->state = USB_STATE_ATTACHED;
dev->lpm_disable_count = 1;
atomic_set(&dev->urbnum, 0);
INIT_LIST_HEAD(&dev->ep0.urb_list);
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
/* ep0 maxpacket comes later, from device descriptor */
usb_enable_endpoint(dev, &dev->ep0, false);
dev->can_submit = 1;
/* Save readable and stable topology id, distinguishing devices
* by location for diagnostics, tools, driver model, etc. The
* string is a path along hub ports, from the root. Each device's
* dev->devpath will be stable until USB is re-cabled, and hubs
* are often labeled with these port numbers. The name isn't
* as stable: bus->busnum changes easily from modprobe order,
* cardbus or pci hotplugging, and so on.
*/
if (unlikely(!parent)) {
dev->devpath[0] = '0';
dev->route = 0;
dev->dev.parent = bus->controller;
device_set_of_node_from_dev(&dev->dev, bus->sysdev);
dev_set_name(&dev->dev, "usb%d", bus->busnum);
root_hub = 1;
} else {
/* match any labeling on the hubs; it's one-based */
if (parent->devpath[0] == '0') {
snprintf(dev->devpath, sizeof dev->devpath,
"%d", port1);
/* Root ports are not counted in route string */
dev->route = 0;
} else {
snprintf(dev->devpath, sizeof dev->devpath,
"%s.%d", parent->devpath, port1);
/* Route string assumes hubs have less than 16 ports */
if (port1 < 15)
dev->route = parent->route +
(port1 << ((parent->level - 1)*4));
else
dev->route = parent->route +
(15 << ((parent->level - 1)*4));
}
dev->dev.parent = &parent->dev;
dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
if (!parent->parent) {
/* device under root hub's port */
raw_port = usb_hcd_find_raw_port_number(usb_hcd,
port1);
}
dev->dev.of_node = usb_of_get_device_node(parent, raw_port);
/* hub driver sets up TT records */
}
dev->portnum = port1;
dev->bus = bus;
dev->parent = parent;
INIT_LIST_HEAD(&dev->filelist);
#ifdef CONFIG_PM
pm_runtime_set_autosuspend_delay(&dev->dev,
usb_autosuspend_delay * 1000);
dev->connect_time = jiffies;
dev->active_duration = -jiffies;
#endif
if (root_hub) /* Root hub always ok [and always wired] */
dev->authorized = 1;
else {
dev->authorized = !!HCD_DEV_AUTHORIZED(usb_hcd);
dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
}
return dev;
}
