/**
* Print usage information of tool.
*/
void usage()
{
char version[255];
dlt_get_version(version,255);
printf("Usage: dlt-control [options] hostname/serial_device_name\n");
printf("Send control message to DLT daemon.\n");
printf("%s \n", version);
printf("Options:\n");
printf(" -v Verbose mode\n");
printf(" -h Usage\n");
printf(" -y Serial device mode\n");
printf(" -b baudrate Serial device baudrate (Default: 115200)\n");
printf(" -e ecuid Set ECU ID (Default: RECV)\n");
printf("\n");
printf(" -a id Control message application id\n");
printf(" -c id Control message context id\n");
printf(" -s id Control message injection service id\n");
printf(" -m message Control message injection in ASCII\n");
printf(" -x message Control message injection in Hex e.g. 'ad 01 24 ef'\n");
printf(" -t milliseconds Timeout to terminate application (Default:1000)'\n");
printf(" -l loglevel Set the log level (0=off - 5=verbose,255=default)\n");
printf(" -r tracestatus Set the trace status (0=off - 1=on,255=default)\n");
printf(" -d loglevel Set the default log level (0=off - 5=verbose)\n");
printf(" -f tracestatus Set the default trace status (0=off - 1=on)\n");
printf(" -i enable Enable timing packets (0=off - 1=on)\n");
printf(" -o Store configuration\n");
printf(" -g Reset to factory default\n");
}
/**
* Print usage information of tool.
*/
void usage()
{
char version[DLT_CONVERT_TEXTBUFSIZE];
dlt_get_version(version,255);
printf("Usage: dlt-convert [options] [commands] file1 [file2]\n");
printf("Read DLT files, print DLT messages as ASCII and store the messages again.\n");
printf("Use filters to filter DLT messages.\n");
printf("Use Ranges and Output file to cut DLT files.\n");
printf("Use two files and Output file to join DLT files.\n");
printf("%s \n", version);
printf("Commands:\n");
printf(" -h Usage\n");
printf(" -a Print DLT file; payload as ASCII\n");
printf(" -x Print DLT file; payload as hex\n");
printf(" -m Print DLT file; payload as hex and ASCII\n");
printf(" -s Print DLT file; only headers\n");
printf(" -o filename Output messages in new DLT file\n");
printf("Options:\n");
printf(" -v Verbose mode\n");
printf(" -c Count number of messages\n");
printf(" -f filename Enable filtering of messages\n");
printf(" -b number First messages to be handled\n");
printf(" -e number Last message to be handled\n");
printf(" -w Follow dlt file while file is increasing\n");
}
/**
* Print usage information
*/
void usage(char *name) {
char version[255];
dlt_get_version(version,255);
printf("Usage: %s [options] <remote address|serial device>\n", name);
printf("Receive messages from dlt-test-multi-process.\n");
printf("%s", version);
printf("Options:\n");
printf(" -m Total messages to receive. (Default: 10000)\n");
printf(" -y Serial device mode.\n");
printf(" -b baudrate Serial device baudrate. (Default: 115200)\n");
printf(" -v Verbose. Increases the verbosity level of dlt client library.\n");
printf(" -o filename Output messages in new DLT file.\n");
}
/**
* Print information how to use this program.
*/
void usage(char *prog_name)
{
char version[255];
dlt_get_version(version,255);
printf("Usage: %s [options]\n", prog_name);
printf("Application to forward syslog messages to DLT, transfer system information, logs and files.\n");
printf("%s\n", version);
printf("Options:\n");
printf(" -d Daemonize. Detach from terminal and run in background.\n");
printf(" -c filename Use configuration file. \n");
printf(" Default: %s\n", DEFAULT_CONF_FILE);
printf(" -h This help message.\n");
}
/**
* Print usage information of tool.
*/
void usage()
{
char version[255];
dlt_get_version(version);
printf("Usage: dlt-example-user-func [options] message\n");
printf("Generate DLT messages and store them to file or send them to daemon.\n");
printf("%s \n", version);
printf("Options:\n");
printf(" -v Verbose mode\n");
printf(" -d delay Milliseconds to wait between sending messages (Default: 500)\n");
printf(" -f filename Use local log file instead of sending to daemon\n");
printf(" -n count Number of messages to be generated (Default: 10)\n");
printf(" -g Switch to non-verbose mode (Default: verbose mode)\n");
printf(" -a Enable local printing of DLT messages (Default: disabled)\n");
}
/**
* Print usage information of tool.
*/
void usage()
{
char version[255];
dlt_get_version(version);
printf("Usage: dlt-test-stress-client [options] hostname/serial_device_name\n");
printf("Test against received data from dlt-test-stress-user.\n");
printf("%s \n", version);
printf("Options:\n");
printf(" -a Print DLT messages; payload as ASCII\n");
printf(" -x Print DLT messages; payload as hex\n");
printf(" -m Print DLT messages; payload as hex and ASCII\n");
printf(" -s Print DLT messages; only headers\n");
printf(" -v Verbose mode\n");
printf(" -h Usage\n");
printf(" -y Serial device mode\n");
printf(" -b baudrate Serial device baudrate (Default: 115200)\n");
printf(" -e ecuid Set ECU ID (Default: ECU1)\n");
printf(" -o filename Output messages in new DLT file\n");
printf(" -f filename Enable filtering of messages\n");
printf(" -n messages Number of messages to be received per test(Default: 10000)\n");
}
int main(int argc, char* argv[])
{
int sock;
int bytes_read;
socklen_t addr_len;
int opt, port;
char recv_data[MAXSTRLEN];
struct sockaddr_in client_addr, server_addr;
char apid[DLT_ID_SIZE];
char ctid[DLT_ID_SIZE];
char version[255];
dlt_set_id(apid, PU_DLT_APP);
dlt_set_id(ctid, PU_DLT_CONTEXT);
port = RCVPORT;
while ((opt = getopt(argc, argv, "a:c:hp:")) != -1)
{
switch (opt)
{
case 'a':
{
dlt_set_id(apid,optarg);
break;
}
case 'c':
{
dlt_set_id(ctid,optarg);
break;
}
case 'h':
{
dlt_get_version(version);
printf("Usage: dlt-adaptor-udp [options]\n");
printf("Adaptor for forwarding received UDP messages to DLT daemon.\n");
printf("%s \n", version);
printf("Options:\n");
printf("-a apid - Set application id to apid (default: UDPA)\n");
printf("-c ctid - Set context id to ctid (default: UDPC)\n");
printf("-p - Set receive port number for UDP messages (default: %d) \n", port);
printf("-h - This help\n");
return 0;
break;
}
case 'p':
{
port = atoi(optarg);
break;
}
default: /* '?' */
{
fprintf(stderr, "Unknown option '%c'\n", optopt);
exit(3);
}
}
}
if ((sock = socket(AF_INET, SOCK_DGRAM, 0)) == -1)
{
perror("Socket");
exit(1);
}
server_addr.sin_family = AF_INET;
server_addr.sin_port = htons(port);
server_addr.sin_addr.s_addr = INADDR_ANY;
bzero(&(server_addr.sin_zero), 8);
if (bind(sock, (struct sockaddr *)&server_addr,
sizeof(struct sockaddr)) == -1)
{
perror("Bind");
return -1;
}
addr_len = sizeof(struct sockaddr);
DLT_REGISTER_APP(apid,PU_DLT_APP_DESC);
DLT_REGISTER_CONTEXT(mycontext,ctid,PU_DLT_CONTEXT_DESC);
while (1)
{
bytes_read = 0;
bytes_read = recvfrom(sock, recv_data, MAXSTRLEN, 0,
(struct sockaddr *)&client_addr, &addr_len);
if (bytes_read == -1)
{
if (errno == EINTR)
{
continue;
}
else
{
DLT_UNREGISTER_CONTEXT(mycontext);
DLT_UNREGISTER_APP();
exit(1);
}
}
recv_data[bytes_read] = '\0';
if (bytes_read != 0)
{
DLT_LOG(mycontext, DLT_LOG_INFO, DLT_STRING(recv_data));
}
}
DLT_UNREGISTER_CONTEXT(mycontext);
DLT_UNREGISTER_APP();
return 0;
}
