int main(void)
{
delay_ms(100);
led_setup();
adc_init();
LCD_SETUP(buffer);
tcp_setup.Gateway = GateWay;//Gateway Address
tcp_setup.MAC = MAC;
tcp_setup.Source_IP = IP;//IP Address
tcp_setup.Source_Port = 80; // Web Port
tcp_setup.Subnet = SubNet;//SubnetMask Address
tcp_setup.s = 0;
tcp_socket_init(&tcp_setup);
while(1)
{
if(check_for_connections(&tcp_setup)) // Wait for connection)
{
process_request(&tcp_setup);
tcp_socket_init(&tcp_setup);
}
sprintf(buffer2,"%d",ADCRead(0));
drawString8x12(10,60,buffer2);
}
}
/*static TCP_CONFIG tcp_setup;
uint8 MAC[6] = {0x00, 0x08, 0xDC, 0x01, 0x02, 0x03};//MAC Address
uint8 IP[4] = {192, 168, 1, 23};//IP Address
uint8 GateWay[4] = {192, 168, 1, 1};//Gateway Address
uint8 SubNet[4] = {255, 255, 255, 0};//SubnetMask Address
uint8_t Dest_IP[4] = {192, 168, 1, 103}; //DST_IP Address
uint8_t get_command();
float adc_calc = 0;
bool startup =false;
*/
int main(void)
{
char mystring[20];
delay_ms(100);//100ms Delay
led_setup();//Initial Setup for LEDs
LCD_SETUP(buffer);//LCD Setup
TEMP_SPI_Init();//Initialize SPI for Temperature Sensor
LPC_GPIO1 -> FIODIR |= LED0 + LED1 + LED2 + LED3 + LED4 + LED5 + LED6 + LED7; // Define LEDs as outputs
LPC_GPIO1 -> FIOPIN |= LED0 + LED1 + LED2 + LED3 + LED4 + LED5 + LED6 + LED7; // Assert lines high, aka turn off leds
/*
tcp_setup.Gateway = GateWay;//Gateway Address
tcp_setup.MAC = MAC;
tcp_setup.Source_IP = IP;//IP Address
tcp_setup.Source_Port= 80; // Web Port
tcp_setup.Subnet= SubNet;//SubnetMask Address
tcp_setup.s= 0;
tcp_socket_init(&tcp_setup);
*/
//Separate code from ethernet module and temp sensor to avoid conflict with data line
write_to_eight_bit_reg(0x40,0x00);//Writing to 8-bit registers for config and command bytes
while(1)
{
delay_ms(480);
/*if(check_for_connections(&tcp_setup)) // Wait for connection)
{
process_request(&tcp_setup);
tcp_socket_init(&tcp_setup);
}*/
//LPC_GPIO1 -> FIOPIN ^= LED0 + LED1 + LED2;
while(!SW0_PRESSED);//Used for debugging
uint8_t receiveddata = read_a_eight_bit_reg( (1<<6)+ (1<<4));
delay_ms(1000);
setColor16(ST7735_16_BLUE);
sprintf(mystring,"Temp: %d", receiveddata);
drawString8x12(10,50,mystring);
//Using leds for delay of 240ms to make it look nice and debug at the same time
LPC_GPIO1 -> FIOPIN ^= LED0;
delay_ms(5);
LPC_GPIO1 -> FIOPIN ^= LED1;
delay_ms(15);
LPC_GPIO1 -> FIOPIN ^= LED2;
delay_ms(25);
LPC_GPIO1 -> FIOPIN ^= LED3;
delay_ms(35);
LPC_GPIO1 -> FIOPIN ^= LED4;
delay_ms(45);
LPC_GPIO1 -> FIOPIN ^= LED5;
delay_ms(55);
LPC_GPIO1 -> FIOPIN ^= LED6;
delay_ms(65);
LPC_GPIO1 -> FIOPIN ^= LED7;
}
}
