static int hdmi_power_on_core(struct omap_dss_device *dssdev)
{
int r;
gpio_set_value(hdmi.ct_cp_hpd_gpio, 1);
gpio_set_value(hdmi.ls_oe_gpio, 1);
/* wait 300us after CT_CP_HPD for the 5V power output to reach 90% */
udelay(300);
r = regulator_enable(hdmi.vdda_hdmi_dac_reg);
if (r)
goto err_vdac_enable;
r = hdmi_runtime_get();
if (r)
goto err_runtime_get;
/* Make selection of HDMI in DSS */
dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
return 0;
err_runtime_get:
regulator_disable(hdmi.vdda_hdmi_dac_reg);
err_vdac_enable:
gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
gpio_set_value(hdmi.ls_oe_gpio, 0);
return r;
}
static int hdmi_power_on_core(struct omap_dss_device *dssdev)
{
int r;
r = regulator_enable(hdmi.vdda_reg);
if (r)
return r;
r = hdmi_runtime_get();
if (r)
goto err_runtime_get;
/* Make selection of HDMI in DSS */
dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
hdmi.core_enabled = true;
return 0;
err_runtime_get:
regulator_disable(hdmi.vdda_reg);
return r;
}
static int hdmi_power_on(struct omap_dss_device *dssdev)
{
int r, code = 0;
struct omap_video_timings *p;
unsigned long phy;
r = hdmi_runtime_get();
if (r)
return r;
dss_mgr_disable(dssdev->manager);
p = &dssdev->panel.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n",
dssdev->panel.timings.x_res,
dssdev->panel.timings.y_res);
code = get_timings_index();
update_hdmi_timings(&hdmi.ip_data.cfg, p, code);
phy = p->pixel_clock;
hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 0);
/* config the PLL and PHY hdmi_set_pll_pwrfirst */
r = hdmi.ip_data.ops->pll_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to lock PLL\n");
goto err;
}
r = hdmi.ip_data.ops->phy_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err;
}
hdmi.ip_data.cfg.cm.mode = hdmi.mode;
hdmi.ip_data.cfg.cm.code = hdmi.code;
hdmi.ip_data.ops->video_configure(&hdmi.ip_data);
/* Make selection of HDMI in DSS */
dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
/* Select the dispc clock source as PRCM clock, to ensure that it is not
* DSI PLL source as the clock selected by DSI PLL might not be
* sufficient for the resolution selected / that can be changed
* dynamically by user. This can be moved to single location , say
* Boardfile.
*/
dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dispc_set_digit_size(dssdev->panel.timings.x_res,
dssdev->panel.timings.y_res);
hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 1);
r = dss_mgr_enable(dssdev->manager);
if (r)
goto err_mgr_enable;
return 0;
err_mgr_enable:
hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 0);
hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
err:
hdmi_runtime_put();
return -EIO;
}
static int hdmi_power_on(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = dssdev->output->manager;
unsigned long phy;
gpio_set_value(hdmi.ct_cp_hpd_gpio, 1);
gpio_set_value(hdmi.ls_oe_gpio, 1);
/* wait 300us after CT_CP_HPD for the 5V power output to reach 90% */
udelay(300);
r = regulator_enable(hdmi.vdda_hdmi_dac_reg);
if (r)
goto err_vdac_enable;
r = hdmi_runtime_get();
if (r)
goto err_runtime_get;
dss_mgr_disable(mgr);
p = &hdmi.ip_data.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
phy = p->pixel_clock;
hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
/* config the PLL and PHY hdmi_set_pll_pwrfirst */
r = hdmi.ip_data.ops->pll_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to lock PLL\n");
goto err_pll_enable;
}
r = hdmi.ip_data.ops->phy_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err_phy_enable;
}
hdmi.ip_data.ops->video_configure(&hdmi.ip_data);
/* Make selection of HDMI in DSS */
dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
/* Select the dispc clock source as PRCM clock, to ensure that it is not
* DSI PLL source as the clock selected by DSI PLL might not be
* sufficient for the resolution selected / that can be changed
* dynamically by user. This can be moved to single location , say
* Boardfile.
*/
dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(mgr, p);
r = hdmi.ip_data.ops->video_enable(&hdmi.ip_data);
if (r)
goto err_vid_enable;
r = dss_mgr_enable(mgr);
if (r)
goto err_mgr_enable;
return 0;
err_mgr_enable:
hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
err_vid_enable:
hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
err_phy_enable:
hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
err_pll_enable:
hdmi_runtime_put();
err_runtime_get:
regulator_disable(hdmi.vdda_hdmi_dac_reg);
err_vdac_enable:
gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
gpio_set_value(hdmi.ls_oe_gpio, 0);
return -EIO;
}
