void mainboard_romstage_entry(unsigned long bist)
{
if (bist == 0)
enable_lapic();
i5000_lpc_config();
winbond_enable_serial(PNP_DEV(0x2e, 2), 0x3f8);
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
early_config();
setup_gpio();
enable_smbus();
smbus_write_byte(0x6f, 0x00, 0x63);
smbus_write_byte(0x6f, 0x01, 0x04);
smbus_write_byte(0x6f, 0x02, 0x53);
smbus_write_byte(0x6f, 0x03, 0x39);
smbus_write_byte(0x6f, 0x08, 0x06);
smbus_write_byte(0x6f, 0x09, 0x00);
pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xf0, (uintptr_t)DEFAULT_RCBA | 1);
i5000_fbdimm_init();
smbus_write_byte(0x69, 0x01, 0x01);
}
void main(unsigned long bist)
{
if (bist == 0)
enable_lapic();
i5000_lpc_config();
w83627hf_enable_serial(PNP_DEV(0x2e, 2), 0x3f8);
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
early_config();
setup_gpio();
enable_smbus();
/* setup PCIe MMCONF base address */
pci_write_config32(PCI_DEV(0, 16, 0), 0x64,
CONFIG_MMCONF_BASE_ADDRESS >> 16);
smbus_write_byte(0x6f, 0x00, 0x63);
smbus_write_byte(0x6f, 0x01, 0x04);
smbus_write_byte(0x6f, 0x02, 0x53);
smbus_write_byte(0x6f, 0x03, 0x39);
smbus_write_byte(0x6f, 0x08, 0x06);
smbus_write_byte(0x6f, 0x09, 0x00);
pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xf0, DEFAULT_RCBA | 1);
i5000_fbdimm_init();
smbus_write_byte(0x69, 0x01, 0x01);
}
void main(unsigned long bist)
{
if (bist == 0)
enable_lapic();
i5000_lpc_config();
w83627hf_enable_serial(PNP_DEV(0x2e, 2), 0x3f8);
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
early_config();
setup_gpio();
enable_smbus();
/* setup PCIe MMCONF base address */
pci_write_config32(PCI_DEV(0, 16, 0), 0x64,
CONFIG_MMCONF_BASE_ADDRESS >> 16);
outb(0x07, 0x11b8);
/* These are smbus write captured with serialice. They
seem to setup the clock generator */
smbus_write_byte(0x6f, 0x88, 0x1f);
smbus_write_byte(0x6f, 0x81, 0xff);
smbus_write_byte(0x6f, 0x82, 0xff);
smbus_write_byte(0x6f, 0x80, 0x23);
outb(0x03, 0x11b8);
outb(0x01, 0x11b8);
pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xf0, DEFAULT_RCBA | 1);
i5000_fbdimm_init();
smbus_write_byte(0x69, 0x01, 0x01);
}
void mainboard_romstage_entry(unsigned long bist)
{
if (bist == 0)
enable_lapic();
i5000_lpc_config();
winbond_enable_serial(SERIAL_DEV, 0x3f8);
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
early_config();
setup_gpio();
enable_smbus();
outb(0x07, 0x11b8);
/* These are smbus write captured with serialice. They
seem to setup the clock generator */
smbus_write_byte(0x6f, 0x88, 0x1f);
smbus_write_byte(0x6f, 0x81, 0xff);
smbus_write_byte(0x6f, 0x82, 0xff);
smbus_write_byte(0x6f, 0x80, 0x23);
outb(0x03, 0x11b8);
outb(0x01, 0x11b8);
pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xf0, (uintptr_t)DEFAULT_RCBA | 1);
i5000_fbdimm_init();
smbus_write_byte(0x69, 0x01, 0x01);
}