__checkReturn efx_rc_t
medford_board_cfg(
__in efx_nic_t *enp)
{
efx_mcdi_iface_t *emip = &(enp->en_mcdi.em_emip);
efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
uint8_t mac_addr[6] = { 0 };
uint32_t board_type = 0;
ef10_link_state_t els;
efx_port_t *epp = &(enp->en_port);
uint32_t port;
uint32_t pf;
uint32_t vf;
uint32_t mask;
uint32_t sysclk, dpcpu_clk;
uint32_t base, nvec;
uint32_t end_padding;
uint32_t bandwidth;
efx_rc_t rc;
/*
* FIXME: Likely to be incomplete and incorrect.
* Parts of this should be shared with Huntington.
*/
if ((rc = efx_mcdi_get_port_assignment(enp, &port)) != 0)
goto fail1;
/*
* NOTE: The MCDI protocol numbers ports from zero.
* The common code MCDI interface numbers ports from one.
*/
emip->emi_port = port + 1;
if ((rc = ef10_external_port_mapping(enp, port,
&encp->enc_external_port)) != 0)
goto fail2;
/*
* Get PCIe function number from firmware (used for
* per-function privilege and dynamic config info).
* - PCIe PF: pf = PF number, vf = 0xffff.
* - PCIe VF: pf = parent PF, vf = VF number.
*/
if ((rc = efx_mcdi_get_function_info(enp, &pf, &vf)) != 0)
goto fail3;
encp->enc_pf = pf;
encp->enc_vf = vf;
/* MAC address for this function */
if (EFX_PCI_FUNCTION_IS_PF(encp)) {
rc = efx_mcdi_get_mac_address_pf(enp, mac_addr);
#if EFSYS_OPT_ALLOW_UNCONFIGURED_NIC
/* Disable static config checking for Medford NICs, ONLY
* for manufacturing test and setup at the factory, to
* allow the static config to be installed.
*/
#else /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
if ((rc == 0) && (mac_addr[0] & 0x02)) {
/*
* If the static config does not include a global MAC
* address pool then the board may return a locally
* administered MAC address (this should only happen on
* incorrectly programmed boards).
*/
rc = EINVAL;
}
#endif /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
} else {
rc = efx_mcdi_get_mac_address_vf(enp, mac_addr);
}
if (rc != 0)
goto fail4;
EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);
/* Board configuration */
rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
if (rc != 0) {
/* Unprivileged functions may not be able to read board cfg */
if (rc == EACCES)
board_type = 0;
else
goto fail5;
}
encp->enc_board_type = board_type;
encp->enc_clk_mult = 1; /* not used for Medford */
/* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
goto fail6;
/* Obtain the default PHY advertised capabilities */
if ((rc = ef10_phy_get_link(enp, &els)) != 0)
goto fail7;
epp->ep_default_adv_cap_mask = els.els_adv_cap_mask;
epp->ep_adv_cap_mask = els.els_adv_cap_mask;
/*
* Enable firmware workarounds for hardware errata.
* Expected responses are:
* - 0 (zero):
* Success: workaround enabled or disabled as requested.
* - MC_CMD_ERR_ENOSYS (reported as ENOTSUP):
* Firmware does not support the MC_CMD_WORKAROUND request.
* (assume that the workaround is not supported).
* - MC_CMD_ERR_ENOENT (reported as ENOENT):
* Firmware does not support the requested workaround.
* - MC_CMD_ERR_EPERM (reported as EACCES):
* Unprivileged function cannot enable/disable workarounds.
*
* See efx_mcdi_request_errcode() for MCDI error translations.
*/
if (EFX_PCI_FUNCTION_IS_VF(encp)) {
/*
* Interrupt testing does not work for VFs. See bug50084.
* FIXME: Does this still apply to Medford?
*/
encp->enc_bug41750_workaround = B_TRUE;
}
/* Chained multicast is always enabled on Medford */
encp->enc_bug26807_workaround = B_TRUE;
/*
* If the bug61265 workaround is enabled, then interrupt holdoff timers
* cannot be controlled by timer table writes, so MCDI must be used
* (timer table writes can still be used for wakeup timers).
*/
rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG61265, B_TRUE,
NULL);
if ((rc == 0) || (rc == EACCES))
encp->enc_bug61265_workaround = B_TRUE;
else if ((rc == ENOTSUP) || (rc == ENOENT))
encp->enc_bug61265_workaround = B_FALSE;
else
goto fail8;
/* Get clock frequencies (in MHz). */
if ((rc = efx_mcdi_get_clock(enp, &sysclk, &dpcpu_clk)) != 0)
goto fail9;
/*
* The Medford timer quantum is 1536 dpcpu_clk cycles, documented for
* the EV_TMR_VAL field of EV_TIMER_TBL. Scale for MHz and ns units.
*/
encp->enc_evq_timer_quantum_ns = 1536000UL / dpcpu_clk; /* 1536 cycles */
encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
FRF_CZ_TC_TIMER_VAL_WIDTH) / 1000;
/* Check capabilities of running datapath firmware */
if ((rc = ef10_get_datapath_caps(enp)) != 0)
goto fail10;
/* Alignment for receive packet DMA buffers */
encp->enc_rx_buf_align_start = 1;
/* Get the RX DMA end padding alignment configuration */
if ((rc = efx_mcdi_get_rxdp_config(enp, &end_padding)) != 0) {
if (rc != EACCES)
goto fail11;
/* Assume largest tail padding size supported by hardware */
end_padding = 256;
}
encp->enc_rx_buf_align_end = end_padding;
/* Alignment for WPTR updates */
encp->enc_rx_push_align = EF10_RX_WPTR_ALIGN;
/*
* Set resource limits for MC_CMD_ALLOC_VIS. Note that we cannot use
* MC_CMD_GET_RESOURCE_LIMITS here as that reports the available
* resources (allocated to this PCIe function), which is zero until
* after we have allocated VIs.
*/
encp->enc_evq_limit = 1024;
encp->enc_rxq_limit = EFX_RXQ_LIMIT_TARGET;
encp->enc_txq_limit = EFX_TXQ_LIMIT_TARGET;
/*
* The maximum supported transmit queue size is 2048. TXQs with 4096
* descriptors are not supported as the top bit is used for vfifo
* stuffing.
*/
encp->enc_txq_max_ndescs = 2048;
encp->enc_buftbl_limit = 0xFFFFFFFF;
encp->enc_piobuf_limit = MEDFORD_PIOBUF_NBUFS;
encp->enc_piobuf_size = MEDFORD_PIOBUF_SIZE;
encp->enc_piobuf_min_alloc_size = MEDFORD_MIN_PIO_ALLOC_SIZE;
/*
* Get the current privilege mask. Note that this may be modified
* dynamically, so this value is informational only. DO NOT use
* the privilege mask to check for sufficient privileges, as that
* can result in time-of-check/time-of-use bugs.
*/
if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
goto fail12;
encp->enc_privilege_mask = mask;
/* Get interrupt vector limits */
if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
if (EFX_PCI_FUNCTION_IS_PF(encp))
goto fail13;
/* Ignore error (cannot query vector limits from a VF). */
base = 0;
nvec = 1024;
}
encp->enc_intr_vec_base = base;
encp->enc_intr_limit = nvec;
/*
* Maximum number of bytes into the frame the TCP header can start for
* firmware assisted TSO to work.
*/
encp->enc_tx_tso_tcp_header_offset_limit = EF10_TCP_HEADER_OFFSET_LIMIT;
/*
* Medford stores a single global copy of VPD, not per-PF as on
* Huntington.
*/
encp->enc_vpd_is_global = B_TRUE;
rc = medford_nic_get_required_pcie_bandwidth(enp, &bandwidth);
if (rc != 0)
goto fail14;
encp->enc_required_pcie_bandwidth_mbps = bandwidth;
encp->enc_max_pcie_link_gen = EFX_PCIE_LINK_SPEED_GEN3;
return (0);
fail14:
EFSYS_PROBE(fail14);
fail13:
EFSYS_PROBE(fail13);
fail12:
EFSYS_PROBE(fail12);
fail11:
EFSYS_PROBE(fail11);
fail10:
EFSYS_PROBE(fail10);
fail9:
EFSYS_PROBE(fail9);
fail8:
EFSYS_PROBE(fail8);
fail7:
EFSYS_PROBE(fail7);
fail6:
EFSYS_PROBE(fail6);
fail5:
EFSYS_PROBE(fail5);
fail4:
EFSYS_PROBE(fail4);
fail3:
EFSYS_PROBE(fail3);
fail2:
EFSYS_PROBE(fail2);
fail1:
EFSYS_PROBE1(fail1, efx_rc_t, rc);
return (rc);
}
__checkReturn efx_rc_t
medford_board_cfg(
__in efx_nic_t *enp)
{
efx_mcdi_iface_t *emip = &(enp->en_mcdi.em_emip);
efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
uint8_t mac_addr[6] = { 0 };
uint32_t board_type = 0;
ef10_link_state_t els;
efx_port_t *epp = &(enp->en_port);
uint32_t port;
uint32_t pf;
uint32_t vf;
uint32_t mask;
uint32_t flags;
uint32_t sysclk;
uint32_t base, nvec;
uint32_t end_padding;
efx_rc_t rc;
/*
* FIXME: Likely to be incomplete and incorrect.
* Parts of this should be shared with Huntington.
*/
if ((rc = efx_mcdi_get_port_assignment(enp, &port)) != 0)
goto fail1;
/*
* NOTE: The MCDI protocol numbers ports from zero.
* The common code MCDI interface numbers ports from one.
*/
emip->emi_port = port + 1;
if ((rc = ef10_external_port_mapping(enp, port,
&encp->enc_external_port)) != 0)
goto fail2;
/*
* Get PCIe function number from firmware (used for
* per-function privilege and dynamic config info).
* - PCIe PF: pf = PF number, vf = 0xffff.
* - PCIe VF: pf = parent PF, vf = VF number.
*/
if ((rc = efx_mcdi_get_function_info(enp, &pf, &vf)) != 0)
goto fail3;
encp->enc_pf = pf;
encp->enc_vf = vf;
/* MAC address for this function */
if (EFX_PCI_FUNCTION_IS_PF(encp)) {
rc = efx_mcdi_get_mac_address_pf(enp, mac_addr);
if ((rc == 0) && (mac_addr[0] & 0x02)) {
/*
* If the static config does not include a global MAC
* address pool then the board may return a locally
* administered MAC address (this should only happen on
* incorrectly programmed boards).
*/
rc = EINVAL;
}
} else {
rc = efx_mcdi_get_mac_address_vf(enp, mac_addr);
}
if (rc != 0)
goto fail4;
EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);
/* Board configuration */
rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
if (rc != 0) {
/* Unprivileged functions may not be able to read board cfg */
if (rc == EACCES)
board_type = 0;
else
goto fail5;
}
encp->enc_board_type = board_type;
encp->enc_clk_mult = 1; /* not used for Medford */
/* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
goto fail6;
/* Obtain the default PHY advertised capabilities */
if ((rc = ef10_phy_get_link(enp, &els)) != 0)
goto fail7;
epp->ep_default_adv_cap_mask = els.els_adv_cap_mask;
epp->ep_adv_cap_mask = els.els_adv_cap_mask;
if (EFX_PCI_FUNCTION_IS_VF(encp)) {
/*
* Interrupt testing does not work for VFs. See bug50084.
* FIXME: Does this still apply to Medford?
*/
encp->enc_bug41750_workaround = B_TRUE;
}
/* Chained multicast is always enabled on Medford */
encp->enc_bug26807_workaround = B_TRUE;
/* Get sysclk frequency (in MHz). */
if ((rc = efx_mcdi_get_clock(enp, &sysclk)) != 0)
goto fail8;
/*
* The timer quantum is 1536 sysclk cycles, documented for the
* EV_TMR_VAL field of EV_TIMER_TBL. Scale for MHz and ns units.
*/
encp->enc_evq_timer_quantum_ns = 1536000UL / sysclk; /* 1536 cycles */
encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
FRF_CZ_TC_TIMER_VAL_WIDTH) / 1000;
/* Check capabilities of running datapath firmware */
if ((rc = ef10_get_datapath_caps(enp)) != 0)
goto fail9;
/* Alignment for receive packet DMA buffers */
encp->enc_rx_buf_align_start = 1;
/* Get the RX DMA end padding alignment configuration */
if ((rc = efx_mcdi_get_rxdp_config(enp, &end_padding)) != 0)
goto fail10;
encp->enc_rx_buf_align_end = end_padding;
/* Alignment for WPTR updates */
encp->enc_rx_push_align = EF10_RX_WPTR_ALIGN;
/*
* Set resource limits for MC_CMD_ALLOC_VIS. Note that we cannot use
* MC_CMD_GET_RESOURCE_LIMITS here as that reports the available
* resources (allocated to this PCIe function), which is zero until
* after we have allocated VIs.
*/
encp->enc_evq_limit = 1024;
encp->enc_rxq_limit = EFX_RXQ_LIMIT_TARGET;
encp->enc_txq_limit = EFX_TXQ_LIMIT_TARGET;
encp->enc_buftbl_limit = 0xFFFFFFFF;
encp->enc_piobuf_limit = MEDFORD_PIOBUF_NBUFS;
encp->enc_piobuf_size = MEDFORD_PIOBUF_SIZE;
encp->enc_piobuf_min_alloc_size = MEDFORD_MIN_PIO_ALLOC_SIZE;
/*
* Get the current privilege mask. Note that this may be modified
* dynamically, so this value is informational only. DO NOT use
* the privilege mask to check for sufficient privileges, as that
* can result in time-of-check/time-of-use bugs.
*/
if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
goto fail11;
encp->enc_privilege_mask = mask;
/* Get interrupt vector limits */
if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
if (EFX_PCI_FUNCTION_IS_PF(encp))
goto fail12;
/* Ignore error (cannot query vector limits from a VF). */
base = 0;
nvec = 1024;
}
encp->enc_intr_vec_base = base;
encp->enc_intr_limit = nvec;
/*
* Maximum number of bytes into the frame the TCP header can start for
* firmware assisted TSO to work.
*/
encp->enc_tx_tso_tcp_header_offset_limit = EF10_TCP_HEADER_OFFSET_LIMIT;
/*
* Medford stores a single global copy of VPD, not per-PF as on
* Huntington.
*/
encp->enc_vpd_is_global = B_TRUE;
return (0);
fail12:
EFSYS_PROBE(fail12);
fail11:
EFSYS_PROBE(fail11);
fail10:
EFSYS_PROBE(fail10);
fail9:
EFSYS_PROBE(fail9);
fail8:
EFSYS_PROBE(fail8);
fail7:
EFSYS_PROBE(fail7);
fail6:
EFSYS_PROBE(fail6);
fail5:
EFSYS_PROBE(fail5);
fail4:
EFSYS_PROBE(fail4);
fail3:
EFSYS_PROBE(fail3);
fail2:
EFSYS_PROBE(fail2);
fail1:
EFSYS_PROBE1(fail1, efx_rc_t, rc);
return (rc);
}
__checkReturn efx_rc_t
hunt_board_cfg(
__in efx_nic_t *enp)
{
efx_mcdi_iface_t *emip = &(enp->en_mcdi.em_emip);
efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
uint8_t mac_addr[6];
uint32_t board_type = 0;
ef10_link_state_t els;
efx_port_t *epp = &(enp->en_port);
uint32_t port;
uint32_t pf;
uint32_t vf;
uint32_t mask;
uint32_t flags;
uint32_t sysclk, dpcpu_clk;
uint32_t base, nvec;
uint32_t bandwidth;
efx_rc_t rc;
if ((rc = efx_mcdi_get_port_assignment(enp, &port)) != 0)
goto fail1;
/*
* NOTE: The MCDI protocol numbers ports from zero.
* The common code MCDI interface numbers ports from one.
*/
emip->emi_port = port + 1;
if ((rc = ef10_external_port_mapping(enp, port,
&encp->enc_external_port)) != 0)
goto fail2;
/*
* Get PCIe function number from firmware (used for
* per-function privilege and dynamic config info).
* - PCIe PF: pf = PF number, vf = 0xffff.
* - PCIe VF: pf = parent PF, vf = VF number.
*/
if ((rc = efx_mcdi_get_function_info(enp, &pf, &vf)) != 0)
goto fail3;
encp->enc_pf = pf;
encp->enc_vf = vf;
/* MAC address for this function */
if (EFX_PCI_FUNCTION_IS_PF(encp)) {
rc = efx_mcdi_get_mac_address_pf(enp, mac_addr);
if ((rc == 0) && (mac_addr[0] & 0x02)) {
/*
* If the static config does not include a global MAC
* address pool then the board may return a locally
* administered MAC address (this should only happen on
* incorrectly programmed boards).
*/
rc = EINVAL;
}
} else {
rc = efx_mcdi_get_mac_address_vf(enp, mac_addr);
}
if (rc != 0)
goto fail4;
EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);
/* Board configuration */
rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
if (rc != 0) {
/* Unprivileged functions may not be able to read board cfg */
if (rc == EACCES)
board_type = 0;
else
goto fail5;
}
encp->enc_board_type = board_type;
encp->enc_clk_mult = 1; /* not used for Huntington */
/* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
goto fail6;
/* Obtain the default PHY advertised capabilities */
if ((rc = ef10_phy_get_link(enp, &els)) != 0)
goto fail7;
epp->ep_default_adv_cap_mask = els.els_adv_cap_mask;
epp->ep_adv_cap_mask = els.els_adv_cap_mask;
/*
* Enable firmware workarounds for hardware errata.
* Expected responses are:
* - 0 (zero):
* Success: workaround enabled or disabled as requested.
* - MC_CMD_ERR_ENOSYS (reported as ENOTSUP):
* Firmware does not support the MC_CMD_WORKAROUND request.
* (assume that the workaround is not supported).
* - MC_CMD_ERR_ENOENT (reported as ENOENT):
* Firmware does not support the requested workaround.
* - MC_CMD_ERR_EPERM (reported as EACCES):
* Unprivileged function cannot enable/disable workarounds.
*
* See efx_mcdi_request_errcode() for MCDI error translations.
*/
/*
* If the bug35388 workaround is enabled, then use an indirect access
* method to avoid unsafe EVQ writes.
*/
rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG35388, B_TRUE,
NULL);
if ((rc == 0) || (rc == EACCES))
encp->enc_bug35388_workaround = B_TRUE;
else if ((rc == ENOTSUP) || (rc == ENOENT))
encp->enc_bug35388_workaround = B_FALSE;
else
goto fail8;
/*
* If the bug41750 workaround is enabled, then do not test interrupts,
* as the test will fail (seen with Greenport controllers).
*/
rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG41750, B_TRUE,
NULL);
if (rc == 0) {
encp->enc_bug41750_workaround = B_TRUE;
} else if (rc == EACCES) {
/* Assume a controller with 40G ports needs the workaround. */
if (epp->ep_default_adv_cap_mask & EFX_PHY_CAP_40000FDX)
encp->enc_bug41750_workaround = B_TRUE;
else
encp->enc_bug41750_workaround = B_FALSE;
} else if ((rc == ENOTSUP) || (rc == ENOENT)) {
encp->enc_bug41750_workaround = B_FALSE;
} else {
goto fail9;
}
if (EFX_PCI_FUNCTION_IS_VF(encp)) {
/* Interrupt testing does not work for VFs. See bug50084. */
encp->enc_bug41750_workaround = B_TRUE;
}
/*
* If the bug26807 workaround is enabled, then firmware has enabled
* support for chained multicast filters. Firmware will reset (FLR)
* functions which have filters in the hardware filter table when the
* workaround is enabled/disabled.
*
* We must recheck if the workaround is enabled after inserting the
* first hardware filter, in case it has been changed since this check.
*/
rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG26807,
B_TRUE, &flags);
if (rc == 0) {
encp->enc_bug26807_workaround = B_TRUE;
if (flags & (1 << MC_CMD_WORKAROUND_EXT_OUT_FLR_DONE_LBN)) {
/*
* Other functions had installed filters before the
* workaround was enabled, and they have been reset
* by firmware.
*/
EFSYS_PROBE(bug26807_workaround_flr_done);
/* FIXME: bump MC warm boot count ? */
}
} else if (rc == EACCES) {
/*
* Unprivileged functions cannot enable the workaround in older
* firmware.
*/
encp->enc_bug26807_workaround = B_FALSE;
} else if ((rc == ENOTSUP) || (rc == ENOENT)) {
encp->enc_bug26807_workaround = B_FALSE;
} else {
goto fail10;
}
/* Get clock frequencies (in MHz). */
if ((rc = efx_mcdi_get_clock(enp, &sysclk, &dpcpu_clk)) != 0)
goto fail11;
/*
* The Huntington timer quantum is 1536 sysclk cycles, documented for
* the EV_TMR_VAL field of EV_TIMER_TBL. Scale for MHz and ns units.
*/
encp->enc_evq_timer_quantum_ns = 1536000UL / sysclk; /* 1536 cycles */
if (encp->enc_bug35388_workaround) {
encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
ERF_DD_EVQ_IND_TIMER_VAL_WIDTH) / 1000;
} else {
encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
FRF_CZ_TC_TIMER_VAL_WIDTH) / 1000;
}
encp->enc_bug61265_workaround = B_FALSE; /* Medford only */
/* Check capabilities of running datapath firmware */
if ((rc = ef10_get_datapath_caps(enp)) != 0)
goto fail12;
/* Alignment for receive packet DMA buffers */
encp->enc_rx_buf_align_start = 1;
encp->enc_rx_buf_align_end = 64; /* RX DMA end padding */
/* Alignment for WPTR updates */
encp->enc_rx_push_align = EF10_RX_WPTR_ALIGN;
encp->enc_tx_dma_desc_size_max = EFX_MASK32(ESF_DZ_RX_KER_BYTE_CNT);
/* No boundary crossing limits */
encp->enc_tx_dma_desc_boundary = 0;
/*
* Set resource limits for MC_CMD_ALLOC_VIS. Note that we cannot use
* MC_CMD_GET_RESOURCE_LIMITS here as that reports the available
* resources (allocated to this PCIe function), which is zero until
* after we have allocated VIs.
*/
encp->enc_evq_limit = 1024;
encp->enc_rxq_limit = EFX_RXQ_LIMIT_TARGET;
encp->enc_txq_limit = EFX_TXQ_LIMIT_TARGET;
encp->enc_buftbl_limit = 0xFFFFFFFF;
encp->enc_piobuf_limit = HUNT_PIOBUF_NBUFS;
encp->enc_piobuf_size = HUNT_PIOBUF_SIZE;
encp->enc_piobuf_min_alloc_size = HUNT_MIN_PIO_ALLOC_SIZE;
/*
* Get the current privilege mask. Note that this may be modified
* dynamically, so this value is informational only. DO NOT use
* the privilege mask to check for sufficient privileges, as that
* can result in time-of-check/time-of-use bugs.
*/
if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
goto fail13;
encp->enc_privilege_mask = mask;
/* Get interrupt vector limits */
if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
if (EFX_PCI_FUNCTION_IS_PF(encp))
goto fail14;
/* Ignore error (cannot query vector limits from a VF). */
base = 0;
nvec = 1024;
}
encp->enc_intr_vec_base = base;
encp->enc_intr_limit = nvec;
/*
* Maximum number of bytes into the frame the TCP header can start for
* firmware assisted TSO to work.
*/
encp->enc_tx_tso_tcp_header_offset_limit = EF10_TCP_HEADER_OFFSET_LIMIT;
if ((rc = hunt_nic_get_required_pcie_bandwidth(enp, &bandwidth)) != 0)
goto fail15;
encp->enc_required_pcie_bandwidth_mbps = bandwidth;
/* All Huntington devices have a PCIe Gen3, 8 lane connector */
encp->enc_max_pcie_link_gen = EFX_PCIE_LINK_SPEED_GEN3;
return (0);
fail15:
EFSYS_PROBE(fail15);
fail14:
EFSYS_PROBE(fail14);
fail13:
EFSYS_PROBE(fail13);
fail12:
EFSYS_PROBE(fail12);
fail11:
EFSYS_PROBE(fail11);
fail10:
EFSYS_PROBE(fail10);
fail9:
EFSYS_PROBE(fail9);
fail8:
EFSYS_PROBE(fail8);
fail7:
EFSYS_PROBE(fail7);
fail6:
EFSYS_PROBE(fail6);
fail5:
EFSYS_PROBE(fail5);
fail4:
EFSYS_PROBE(fail4);
fail3:
EFSYS_PROBE(fail3);
fail2:
EFSYS_PROBE(fail2);
fail1:
EFSYS_PROBE1(fail1, efx_rc_t, rc);
return (rc);
}