// This function must be called inside the m_transferQueueItemLocks, for the
// wait, m_interruptedByRemovingOp and getHasGLContext().
// Only called by updateQueueWithBitmap() for now.
bool TransferQueue::readyForUpdate()
{
if (!getHasGLContext())
return false;
// Don't use a while loop since when the WebView tear down, the emptyCount
// will still be 0, and we bailed out b/c of GL context lost.
if (!m_emptyItemCount) {
if (m_interruptedByRemovingOp)
return false;
m_transferQueueItemCond.wait(m_transferQueueItemLocks);
if (m_interruptedByRemovingOp)
return false;
}
if (!getHasGLContext())
return false;
// Disable this wait until we figure out why this didn't work on some
// drivers b/5332112.
#if 0
if (m_currentUploadType == GpuUpload
&& m_currentDisplay != EGL_NO_DISPLAY) {
// Check the GPU fence
EGLSyncKHR syncKHR = m_transferQueue[getNextTransferQueueIndex()].m_syncKHR;
if (syncKHR != EGL_NO_SYNC_KHR)
eglClientWaitSyncKHR(m_currentDisplay,
syncKHR,
EGL_SYNC_FLUSH_COMMANDS_BIT_KHR,
EGL_FOREVER_KHR);
}
GLUtils::checkEglError("WaitSyncKHR");
#endif
return true;
}
void GraphicsContext3DInternal::destroyEGLSync(FBO* fbo)
{
if (fbo->sync() == EGL_NO_SYNC_KHR) return;
eglClientWaitSyncKHR(m_dpy, fbo->sync(), 0, 0);
eglDestroySyncKHR(m_dpy, fbo->sync());
fbo->setSync(EGL_NO_SYNC_KHR);
}
status_t SurfaceTexture::syncForReleaseLocked(EGLDisplay dpy) {
ST_LOGV("syncForReleaseLocked");
if (mUseFenceSync && mCurrentTexture != BufferQueue::INVALID_BUFFER_SLOT) {
EGLSyncKHR fence = mEGLSlots[mCurrentTexture].mFence;
if (fence != EGL_NO_SYNC_KHR) {
// There is already a fence for the current slot. We need to wait
// on that before replacing it with another fence to ensure that all
// outstanding buffer accesses have completed before the producer
// accesses it.
EGLint result = eglClientWaitSyncKHR(dpy, fence, 0, 1000000000);
if (result == EGL_FALSE) {
ST_LOGE("syncForReleaseLocked: error waiting for previous "
"fence: %#x", eglGetError());
return UNKNOWN_ERROR;
} else if (result == EGL_TIMEOUT_EXPIRED_KHR) {
ST_LOGE("syncForReleaseLocked: timeout waiting for previous "
"fence");
return TIMED_OUT;
}
eglDestroySyncKHR(dpy, fence);
}
// Create a fence for the outstanding accesses in the current OpenGL ES
// context.
fence = eglCreateSyncKHR(dpy, EGL_SYNC_FENCE_KHR, NULL);
if (fence == EGL_NO_SYNC_KHR) {
ST_LOGE("syncForReleaseLocked: error creating fence: %#x",
eglGetError());
return UNKNOWN_ERROR;
}
glFlush();
mEGLSlots[mCurrentTexture].mFence = fence;
}
return OK;
}
status_t SurfaceTexture::syncForReleaseLocked(EGLDisplay dpy) {
ST_LOGV("syncForReleaseLocked");
if (mCurrentTexture != BufferQueue::INVALID_BUFFER_SLOT) {
if (useNativeFenceSync) {
EGLSyncKHR sync = eglCreateSyncKHR(dpy,
EGL_SYNC_NATIVE_FENCE_ANDROID, NULL);
if (sync == EGL_NO_SYNC_KHR) {
ST_LOGE("syncForReleaseLocked: error creating EGL fence: %#x",
eglGetError());
return UNKNOWN_ERROR;
}
glFlush();
int fenceFd = eglDupNativeFenceFDANDROID(dpy, sync);
eglDestroySyncKHR(dpy, sync);
if (fenceFd == EGL_NO_NATIVE_FENCE_FD_ANDROID) {
ST_LOGE("syncForReleaseLocked: error dup'ing native fence "
"fd: %#x", eglGetError());
return UNKNOWN_ERROR;
}
sp<Fence> fence(new Fence(fenceFd));
status_t err = addReleaseFenceLocked(mCurrentTexture, fence);
if (err != OK) {
ST_LOGE("syncForReleaseLocked: error adding release fence: "
"%s (%d)", strerror(-err), err);
return err;
}
} else if (mUseFenceSync) {
EGLSyncKHR fence = mEglSlots[mCurrentTexture].mEglFence;
if (fence != EGL_NO_SYNC_KHR) {
// There is already a fence for the current slot. We need to
// wait on that before replacing it with another fence to
// ensure that all outstanding buffer accesses have completed
// before the producer accesses it.
EGLint result = eglClientWaitSyncKHR(dpy, fence, 0, 1000000000);
if (result == EGL_FALSE) {
ST_LOGE("syncForReleaseLocked: error waiting for previous "
"fence: %#x", eglGetError());
return UNKNOWN_ERROR;
} else if (result == EGL_TIMEOUT_EXPIRED_KHR) {
ST_LOGE("syncForReleaseLocked: timeout waiting for previous "
"fence");
return TIMED_OUT;
}
eglDestroySyncKHR(dpy, fence);
}
// Create a fence for the outstanding accesses in the current
// OpenGL ES context.
fence = eglCreateSyncKHR(dpy, EGL_SYNC_FENCE_KHR, NULL);
if (fence == EGL_NO_SYNC_KHR) {
ST_LOGE("syncForReleaseLocked: error creating fence: %#x",
eglGetError());
return UNKNOWN_ERROR;
}
glFlush();
mEglSlots[mCurrentTexture].mEglFence = fence;
}
}
return OK;
}
static jboolean com_android_server_AssetAtlasService_upload(JNIEnv* env, jobject,
jobject graphicBuffer, jlong bitmapHandle) {
SkBitmap* bitmap = reinterpret_cast<SkBitmap*>(bitmapHandle);
// The goal of this method is to copy the bitmap into the GraphicBuffer
// using the GPU to swizzle the texture content
sp<GraphicBuffer> buffer(graphicBufferForJavaObject(env, graphicBuffer));
if (buffer != NULL) {
EGLDisplay display = eglGetDisplay(EGL_DEFAULT_DISPLAY);
if (display == EGL_NO_DISPLAY) return JNI_FALSE;
EGLint major;
EGLint minor;
if (!eglInitialize(display, &major, &minor)) {
ALOGW("Could not initialize EGL");
return JNI_FALSE;
}
// We're going to use a 1x1 pbuffer surface later on
// The configuration doesn't really matter for what we're trying to do
EGLint configAttrs[] = {
EGL_RENDERABLE_TYPE, EGL_OPENGL_ES2_BIT,
EGL_RED_SIZE, 8,
EGL_GREEN_SIZE, 8,
EGL_BLUE_SIZE, 8,
EGL_ALPHA_SIZE, 0,
EGL_DEPTH_SIZE, 0,
EGL_STENCIL_SIZE, 0,
EGL_NONE
};
EGLConfig configs[1];
EGLint configCount;
if (!eglChooseConfig(display, configAttrs, configs, 1, &configCount)) {
ALOGW("Could not select EGL configuration");
eglReleaseThread();
eglTerminate(display);
return JNI_FALSE;
}
if (configCount <= 0) {
ALOGW("Could not find EGL configuration");
eglReleaseThread();
eglTerminate(display);
return JNI_FALSE;
}
// These objects are initialized below but the default "null"
// values are used to cleanup properly at any point in the
// initialization sequence
GLuint texture = 0;
EGLImageKHR image = EGL_NO_IMAGE_KHR;
EGLSurface surface = EGL_NO_SURFACE;
EGLSyncKHR fence = EGL_NO_SYNC_KHR;
EGLint attrs[] = { EGL_CONTEXT_CLIENT_VERSION, 2, EGL_NONE };
EGLContext context = eglCreateContext(display, configs[0], EGL_NO_CONTEXT, attrs);
if (context == EGL_NO_CONTEXT) {
ALOGW("Could not create EGL context");
CLEANUP_GL_AND_RETURN(JNI_FALSE);
}
// Create the 1x1 pbuffer
EGLint surfaceAttrs[] = { EGL_WIDTH, 1, EGL_HEIGHT, 1, EGL_NONE };
surface = eglCreatePbufferSurface(display, configs[0], surfaceAttrs);
if (surface == EGL_NO_SURFACE) {
ALOGW("Could not create EGL surface");
CLEANUP_GL_AND_RETURN(JNI_FALSE);
}
if (!eglMakeCurrent(display, surface, surface, context)) {
ALOGW("Could not change current EGL context");
CLEANUP_GL_AND_RETURN(JNI_FALSE);
}
// We use an EGLImage to access the content of the GraphicBuffer
// The EGL image is later bound to a 2D texture
EGLClientBuffer clientBuffer = (EGLClientBuffer) buffer->getNativeBuffer();
EGLint imageAttrs[] = { EGL_IMAGE_PRESERVED_KHR, EGL_TRUE, EGL_NONE };
image = eglCreateImageKHR(display, EGL_NO_CONTEXT,
EGL_NATIVE_BUFFER_ANDROID, clientBuffer, imageAttrs);
if (image == EGL_NO_IMAGE_KHR) {
ALOGW("Could not create EGL image");
CLEANUP_GL_AND_RETURN(JNI_FALSE);
}
glGenTextures(1, &texture);
glBindTexture(GL_TEXTURE_2D, texture);
glEGLImageTargetTexture2DOES(GL_TEXTURE_2D, image);
if (glGetError() != GL_NO_ERROR) {
ALOGW("Could not create/bind texture");
CLEANUP_GL_AND_RETURN(JNI_FALSE);
}
// Upload the content of the bitmap in the GraphicBuffer
glPixelStorei(GL_UNPACK_ALIGNMENT, bitmap->bytesPerPixel());
glTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, bitmap->width(), bitmap->height(),
GL_RGBA, GL_UNSIGNED_BYTE, bitmap->getPixels());
if (glGetError() != GL_NO_ERROR) {
ALOGW("Could not upload to texture");
CLEANUP_GL_AND_RETURN(JNI_FALSE);
}
// The fence is used to wait for the texture upload to finish
// properly. We cannot rely on glFlush() and glFinish() as
// some drivers completely ignore these API calls
fence = eglCreateSyncKHR(display, EGL_SYNC_FENCE_KHR, NULL);
if (fence == EGL_NO_SYNC_KHR) {
ALOGW("Could not create sync fence %#x", eglGetError());
CLEANUP_GL_AND_RETURN(JNI_FALSE);
}
// The flag EGL_SYNC_FLUSH_COMMANDS_BIT_KHR will trigger a
// pipeline flush (similar to what a glFlush() would do.)
EGLint waitStatus = eglClientWaitSyncKHR(display, fence,
EGL_SYNC_FLUSH_COMMANDS_BIT_KHR, FENCE_TIMEOUT);
if (waitStatus != EGL_CONDITION_SATISFIED_KHR) {
ALOGW("Failed to wait for the fence %#x", eglGetError());
CLEANUP_GL_AND_RETURN(JNI_FALSE);
}
CLEANUP_GL_AND_RETURN(JNI_TRUE);
}
return JNI_FALSE;
}
status_t BufferQueue::dequeueBuffer(int *outBuf, uint32_t w, uint32_t h,
uint32_t format, uint32_t usage) {
ATRACE_CALL();
ST_LOGV("dequeueBuffer: w=%d h=%d fmt=%#x usage=%#x", w, h, format, usage);
if ((w && !h) || (!w && h)) {
ST_LOGE("dequeueBuffer: invalid size: w=%u, h=%u", w, h);
return BAD_VALUE;
}
status_t returnFlags(OK);
EGLDisplay dpy = EGL_NO_DISPLAY;
EGLSyncKHR fence = EGL_NO_SYNC_KHR;
{ // Scope for the lock
Mutex::Autolock lock(mMutex);
if (format == 0) {
format = mDefaultBufferFormat;
}
// turn on usage bits the consumer requested
usage |= mConsumerUsageBits;
int found = -1;
int foundSync = -1;
int dequeuedCount = 0;
bool tryAgain = true;
while (tryAgain) {
if (mAbandoned) {
ST_LOGE("dequeueBuffer: SurfaceTexture has been abandoned!");
return NO_INIT;
}
// We need to wait for the FIFO to drain if the number of buffer
// needs to change.
//
// The condition "number of buffers needs to change" is true if
// - the client doesn't care about how many buffers there are
// - AND the actual number of buffer is different from what was
// set in the last setBufferCountServer()
// - OR -
// setBufferCountServer() was set to a value incompatible with
// the synchronization mode (for instance because the sync mode
// changed since)
//
// As long as this condition is true AND the FIFO is not empty, we
// wait on mDequeueCondition.
const int minBufferCountNeeded = mSynchronousMode ?
mMinSyncBufferSlots : mMinAsyncBufferSlots;
const bool numberOfBuffersNeedsToChange = !mClientBufferCount &&
((mServerBufferCount != mBufferCount) ||
(mServerBufferCount < minBufferCountNeeded));
if (!mQueue.isEmpty() && numberOfBuffersNeedsToChange) {
// wait for the FIFO to drain
mDequeueCondition.wait(mMutex);
// NOTE: we continue here because we need to reevaluate our
// whole state (eg: we could be abandoned or disconnected)
continue;
}
if (numberOfBuffersNeedsToChange) {
// here we're guaranteed that mQueue is empty
freeAllBuffersLocked();
mBufferCount = mServerBufferCount;
if (mBufferCount < minBufferCountNeeded)
mBufferCount = minBufferCountNeeded;
mBufferHasBeenQueued = false;
returnFlags |= ISurfaceTexture::RELEASE_ALL_BUFFERS;
}
// look for a free buffer to give to the client
found = INVALID_BUFFER_SLOT;
foundSync = INVALID_BUFFER_SLOT;
dequeuedCount = 0;
for (int i = 0; i < mBufferCount; i++) {
const int state = mSlots[i].mBufferState;
if (state == BufferSlot::DEQUEUED) {
dequeuedCount++;
}
// this logic used to be if (FLAG_ALLOW_DEQUEUE_CURRENT_BUFFER)
// but dequeuing the current buffer is disabled.
if (false) {
// This functionality has been temporarily removed so
// BufferQueue and SurfaceTexture can be refactored into
// separate objects
} else {
if (state == BufferSlot::FREE) {
/* We return the oldest of the free buffers to avoid
* stalling the producer if possible. This is because
* the consumer may still have pending reads of the
* buffers in flight.
*/
bool isOlder = mSlots[i].mFrameNumber <
mSlots[found].mFrameNumber;
if (found < 0 || isOlder) {
foundSync = i;
found = i;
}
}
}
}
// clients are not allowed to dequeue more than one buffer
// if they didn't set a buffer count.
if (!mClientBufferCount && dequeuedCount) {
ST_LOGE("dequeueBuffer: can't dequeue multiple buffers without "
"setting the buffer count");
return -EINVAL;
}
// See whether a buffer has been queued since the last
// setBufferCount so we know whether to perform the
// mMinUndequeuedBuffers check below.
if (mBufferHasBeenQueued) {
// make sure the client is not trying to dequeue more buffers
// than allowed.
const int avail = mBufferCount - (dequeuedCount+1);
if (avail < (mMinUndequeuedBuffers-int(mSynchronousMode))) {
ST_LOGE("dequeueBuffer: mMinUndequeuedBuffers=%d exceeded "
"(dequeued=%d)",
mMinUndequeuedBuffers-int(mSynchronousMode),
dequeuedCount);
return -EBUSY;
}
}
// if no buffer is found, wait for a buffer to be released
tryAgain = found == INVALID_BUFFER_SLOT;
if (tryAgain) {
mDequeueCondition.wait(mMutex);
}
}
if (found == INVALID_BUFFER_SLOT) {
// This should not happen.
ST_LOGE("dequeueBuffer: no available buffer slots");
return -EBUSY;
}
const int buf = found;
*outBuf = found;
ATRACE_BUFFER_INDEX(buf);
const bool useDefaultSize = !w && !h;
if (useDefaultSize) {
// use the default size
w = mDefaultWidth;
h = mDefaultHeight;
}
const bool updateFormat = (format != 0);
if (!updateFormat) {
// keep the current (or default) format
format = mPixelFormat;
}
// buffer is now in DEQUEUED (but can also be current at the same time,
// if we're in synchronous mode)
mSlots[buf].mBufferState = BufferSlot::DEQUEUED;
const sp<GraphicBuffer>& buffer(mSlots[buf].mGraphicBuffer);
if ((buffer == NULL) ||
(uint32_t(buffer->width) != w) ||
(uint32_t(buffer->height) != h) ||
(uint32_t(buffer->format) != format) ||
((uint32_t(buffer->usage) & usage) != usage))
{
status_t error;
sp<GraphicBuffer> graphicBuffer(
mGraphicBufferAlloc->createGraphicBuffer(
w, h, format, usage, &error));
if (graphicBuffer == 0) {
ST_LOGE("dequeueBuffer: SurfaceComposer::createGraphicBuffer "
"failed");
return error;
}
if (updateFormat) {
mPixelFormat = format;
}
mSlots[buf].mAcquireCalled = false;
mSlots[buf].mGraphicBuffer = graphicBuffer;
mSlots[buf].mRequestBufferCalled = false;
mSlots[buf].mFence = EGL_NO_SYNC_KHR;
mSlots[buf].mEglDisplay = EGL_NO_DISPLAY;
returnFlags |= ISurfaceTexture::BUFFER_NEEDS_REALLOCATION;
}
dpy = mSlots[buf].mEglDisplay;
fence = mSlots[buf].mFence;
mSlots[buf].mFence = EGL_NO_SYNC_KHR;
} // end lock scope
if (fence != EGL_NO_SYNC_KHR) {
EGLint result = eglClientWaitSyncKHR(dpy, fence, 0, 1000000000);
// If something goes wrong, log the error, but return the buffer without
// synchronizing access to it. It's too late at this point to abort the
// dequeue operation.
if (result == EGL_FALSE) {
ST_LOGE("dequeueBuffer: error waiting for fence: %#x", eglGetError());
} else if (result == EGL_TIMEOUT_EXPIRED_KHR) {
ST_LOGE("dequeueBuffer: timeout waiting for fence");
}
eglDestroySyncKHR(dpy, fence);
}
ST_LOGV("dequeueBuffer: returning slot=%d buf=%p flags=%#x", *outBuf,
mSlots[*outBuf].mGraphicBuffer->handle, returnFlags);
return returnFlags;
}
status_t SurfaceTexture::dequeueBuffer(int *outBuf, uint32_t w, uint32_t h,
uint32_t format, uint32_t usage) {
ST_LOGV("dequeueBuffer: w=%d h=%d fmt=%#x usage=%#x", w, h, format, usage);
if ((w && !h) || (!w && h)) {
ST_LOGE("dequeueBuffer: invalid size: w=%u, h=%u", w, h);
return BAD_VALUE;
}
status_t returnFlags(OK);
EGLDisplay dpy = EGL_NO_DISPLAY;
EGLSyncKHR fence = EGL_NO_SYNC_KHR;
{ // Scope for the lock
Mutex::Autolock lock(mMutex);
int found = -1;
int foundSync = -1;
int dequeuedCount = 0;
bool tryAgain = true;
#ifdef MISSING_GRALLOC_BUFFERS
int dequeueRetries = 5;
#endif
while (tryAgain) {
if (mAbandoned) {
ST_LOGE("dequeueBuffer: SurfaceTexture has been abandoned!");
return NO_INIT;
}
// We need to wait for the FIFO to drain if the number of buffer
// needs to change.
//
// The condition "number of buffers needs to change" is true if
// - the client doesn't care about how many buffers there are
// - AND the actual number of buffer is different from what was
// set in the last setBufferCountServer()
// - OR -
// setBufferCountServer() was set to a value incompatible with
// the synchronization mode (for instance because the sync mode
// changed since)
//
// As long as this condition is true AND the FIFO is not empty, we
// wait on mDequeueCondition.
const int minBufferCountNeeded = mSynchronousMode ?
MIN_SYNC_BUFFER_SLOTS : MIN_ASYNC_BUFFER_SLOTS;
const bool numberOfBuffersNeedsToChange = !mClientBufferCount &&
((mServerBufferCount != mBufferCount) ||
(mServerBufferCount < minBufferCountNeeded));
if (!mQueue.isEmpty() && numberOfBuffersNeedsToChange) {
// wait for the FIFO to drain
mDequeueCondition.wait(mMutex);
// NOTE: we continue here because we need to reevaluate our
// whole state (eg: we could be abandoned or disconnected)
continue;
}
if (numberOfBuffersNeedsToChange) {
// here we're guaranteed that mQueue is empty
freeAllBuffersLocked();
mBufferCount = mServerBufferCount;
if (mBufferCount < minBufferCountNeeded)
mBufferCount = minBufferCountNeeded;
mCurrentTexture = INVALID_BUFFER_SLOT;
returnFlags |= ISurfaceTexture::RELEASE_ALL_BUFFERS;
}
// look for a free buffer to give to the client
found = INVALID_BUFFER_SLOT;
foundSync = INVALID_BUFFER_SLOT;
dequeuedCount = 0;
for (int i = 0; i < mBufferCount; i++) {
const int state = mSlots[i].mBufferState;
if (state == BufferSlot::DEQUEUED) {
dequeuedCount++;
}
// if buffer is FREE it CANNOT be current
LOGW_IF((state == BufferSlot::FREE) && (mCurrentTexture==i),
"dequeueBuffer: buffer %d is both FREE and current!",
i);
if (FLAG_ALLOW_DEQUEUE_CURRENT_BUFFER) {
if (state == BufferSlot::FREE || i == mCurrentTexture) {
foundSync = i;
if (i != mCurrentTexture) {
found = i;
break;
}
}
} else {
if (state == BufferSlot::FREE) {
/* We return the oldest of the free buffers to avoid
* stalling the producer if possible. This is because
* the consumer may still have pending reads of the
* buffers in flight.
*/
bool isOlder = mSlots[i].mFrameNumber <
mSlots[found].mFrameNumber;
if (found < 0 || isOlder) {
foundSync = i;
found = i;
}
}
}
}
// clients are not allowed to dequeue more than one buffer
// if they didn't set a buffer count.
if (!mClientBufferCount && dequeuedCount) {
#ifdef MISSING_GRALLOC_BUFFERS
if (--dequeueRetries) {
LOGD("SurfaceTexture::dequeue: Not allowed to dequeue more "
"than a buffer SLEEPING\n");
usleep(10000);
} else {
mClientBufferCount = mServerBufferCount;
LOGD("SurfaceTexture::dequeue: Not allowed to dequeue more "
"than a buffer RETRY mBufferCount:%d mServerBufferCount:%d\n",
mBufferCount, mServerBufferCount);
}
continue;
#else
ST_LOGE("dequeueBuffer: can't dequeue multiple buffers without "
"setting the buffer count");
#endif
return -EINVAL;
}
// See whether a buffer has been queued since the last
// setBufferCount so we know whether to perform the
// MIN_UNDEQUEUED_BUFFERS check below.
bool bufferHasBeenQueued = mCurrentTexture != INVALID_BUFFER_SLOT;
if (bufferHasBeenQueued) {
// make sure the client is not trying to dequeue more buffers
// than allowed.
const int avail = mBufferCount - (dequeuedCount+1);
if (avail < (MIN_UNDEQUEUED_BUFFERS-int(mSynchronousMode))) {
#ifdef MISSING_GRALLOC_BUFFERS
if (mClientBufferCount != 0) {
mBufferCount++;
mClientBufferCount = mServerBufferCount = mBufferCount;
LOGD("SurfaceTexture::dequeuebuffer: MIN EXCEEDED "
"mBuffer:%d bumped\n", mBufferCount);
continue;
}
#endif
ST_LOGE("dequeueBuffer: MIN_UNDEQUEUED_BUFFERS=%d exceeded "
"(dequeued=%d)",
MIN_UNDEQUEUED_BUFFERS-int(mSynchronousMode),
dequeuedCount);
return -EBUSY;
}
}
// we're in synchronous mode and didn't find a buffer, we need to
// wait for some buffers to be consumed
tryAgain = mSynchronousMode && (foundSync == INVALID_BUFFER_SLOT);
if (tryAgain) {
mDequeueCondition.wait(mMutex);
}
}
if (mSynchronousMode && found == INVALID_BUFFER_SLOT) {
// foundSync guaranteed to be != INVALID_BUFFER_SLOT
found = foundSync;
}
if (found == INVALID_BUFFER_SLOT) {
// This should not happen.
ST_LOGE("dequeueBuffer: no available buffer slots");
return -EBUSY;
}
const int buf = found;
*outBuf = found;
const bool useDefaultSize = !w && !h;
if (useDefaultSize) {
// use the default size
w = mDefaultWidth;
h = mDefaultHeight;
}
const bool updateFormat = (format != 0);
if (!updateFormat) {
// keep the current (or default) format
format = mPixelFormat;
}
// buffer is now in DEQUEUED (but can also be current at the same time,
// if we're in synchronous mode)
mSlots[buf].mBufferState = BufferSlot::DEQUEUED;
const sp<GraphicBuffer>& buffer(mSlots[buf].mGraphicBuffer);
#ifdef QCOM_HARDWARE
qBufGeometry currentGeometry;
if (buffer != NULL)
currentGeometry.set(buffer->width, buffer->height, buffer->format);
else
currentGeometry.set(0, 0, 0);
qBufGeometry requiredGeometry;
requiredGeometry.set(w, h, format);
qBufGeometry updatedGeometry;
updatedGeometry.set(mNextBufferInfo.width, mNextBufferInfo.height,
mNextBufferInfo.format);
#endif
if ((buffer == NULL) ||
#ifdef QCOM_HARDWARE
needNewBuffer(currentGeometry, requiredGeometry, updatedGeometry) ||
#else
(uint32_t(buffer->width) != w) ||
(uint32_t(buffer->height) != h) ||
(uint32_t(buffer->format) != format) ||
#endif
((uint32_t(buffer->usage) & usage) != usage))
{
#ifdef QCOM_HARDWARE
if (buffer != NULL) {
mGraphicBufferAlloc->freeGraphicBufferAtIndex(buf);
}
#endif
usage |= GraphicBuffer::USAGE_HW_TEXTURE;
status_t error;
sp<GraphicBuffer> graphicBuffer(
mGraphicBufferAlloc->createGraphicBuffer(
w, h, format, usage, &error));
if (graphicBuffer == 0) {
ST_LOGE("dequeueBuffer: SurfaceComposer::createGraphicBuffer "
"failed");
return error;
}
if (updateFormat) {
mPixelFormat = format;
}
#ifdef QCOM_HARDWARE
checkBuffer((native_handle_t *)graphicBuffer->handle, mReqSize, usage);
#endif
mSlots[buf].mGraphicBuffer = graphicBuffer;
mSlots[buf].mRequestBufferCalled = false;
mSlots[buf].mFence = EGL_NO_SYNC_KHR;
if (mSlots[buf].mEglImage != EGL_NO_IMAGE_KHR) {
eglDestroyImageKHR(mSlots[buf].mEglDisplay,
mSlots[buf].mEglImage);
mSlots[buf].mEglImage = EGL_NO_IMAGE_KHR;
mSlots[buf].mEglDisplay = EGL_NO_DISPLAY;
}
if (mCurrentTexture == buf) {
// The current texture no longer references the buffer in this slot
// since we just allocated a new buffer.
mCurrentTexture = INVALID_BUFFER_SLOT;
}
returnFlags |= ISurfaceTexture::BUFFER_NEEDS_REALLOCATION;
}
dpy = mSlots[buf].mEglDisplay;
fence = mSlots[buf].mFence;
mSlots[buf].mFence = EGL_NO_SYNC_KHR;
}
if (fence != EGL_NO_SYNC_KHR) {
EGLint result = eglClientWaitSyncKHR(dpy, fence, 0, 1000000000);
// If something goes wrong, log the error, but return the buffer without
// synchronizing access to it. It's too late at this point to abort the
// dequeue operation.
if (result == EGL_FALSE) {
LOGE("dequeueBuffer: error waiting for fence: %#x", eglGetError());
} else if (result == EGL_TIMEOUT_EXPIRED_KHR) {
LOGE("dequeueBuffer: timeout waiting for fence");
}
eglDestroySyncKHR(dpy, fence);
}
ST_LOGV("dequeueBuffer: returning slot=%d buf=%p flags=%#x", *outBuf,
mSlots[*outBuf].mGraphicBuffer->handle, returnFlags);
return returnFlags;
}
status_t BufferQueue::dequeueBuffer(int *outBuf, sp<Fence>* outFence,
uint32_t w, uint32_t h, uint32_t format, uint32_t usage) {
ATRACE_CALL();
ST_LOGV("dequeueBuffer: w=%d h=%d fmt=%#x usage=%#x", w, h, format, usage);
if ((w && !h) || (!w && h)) {
ST_LOGE("dequeueBuffer: invalid size: w=%u, h=%u", w, h);
return BAD_VALUE;
}
status_t returnFlags(OK);
EGLDisplay dpy = EGL_NO_DISPLAY;
EGLSyncKHR eglFence = EGL_NO_SYNC_KHR;
{ // Scope for the lock
Mutex::Autolock lock(mMutex);
if (format == 0) {
format = mDefaultBufferFormat;
}
// turn on usage bits the consumer requested
usage |= mConsumerUsageBits;
int found = -1;
int dequeuedCount = 0;
bool tryAgain = true;
while (tryAgain) {
if (mAbandoned) {
ST_LOGE("dequeueBuffer: BufferQueue has been abandoned!");
return NO_INIT;
}
const int maxBufferCount = getMaxBufferCountLocked();
// Free up any buffers that are in slots beyond the max buffer
// count.
for (int i = maxBufferCount; i < NUM_BUFFER_SLOTS; i++) {
assert(mSlots[i].mBufferState == BufferSlot::FREE);
if (mSlots[i].mGraphicBuffer != NULL) {
freeBufferLocked(i);
returnFlags |= IGraphicBufferProducer::RELEASE_ALL_BUFFERS;
}
}
// look for a free buffer to give to the client
found = INVALID_BUFFER_SLOT;
dequeuedCount = 0;
for (int i = 0; i < maxBufferCount; i++) {
const int state = mSlots[i].mBufferState;
if (state == BufferSlot::DEQUEUED) {
dequeuedCount++;
}
if (state == BufferSlot::FREE) {
/* We return the oldest of the free buffers to avoid
* stalling the producer if possible. This is because
* the consumer may still have pending reads of the
* buffers in flight.
*/
if ((found < 0) ||
mSlots[i].mFrameNumber < mSlots[found].mFrameNumber) {
found = i;
}
}
}
// clients are not allowed to dequeue more than one buffer
// if they didn't set a buffer count.
if (!mOverrideMaxBufferCount && dequeuedCount) {
ST_LOGE("dequeueBuffer: can't dequeue multiple buffers without "
"setting the buffer count");
return -EINVAL;
}
// See whether a buffer has been queued since the last
// setBufferCount so we know whether to perform the min undequeued
// buffers check below.
if (mBufferHasBeenQueued) {
// make sure the client is not trying to dequeue more buffers
// than allowed.
const int newUndequeuedCount = maxBufferCount - (dequeuedCount+1);
const int minUndequeuedCount = getMinUndequeuedBufferCountLocked();
if (newUndequeuedCount < minUndequeuedCount) {
ST_LOGE("dequeueBuffer: min undequeued buffer count (%d) "
"exceeded (dequeued=%d undequeudCount=%d)",
minUndequeuedCount, dequeuedCount,
newUndequeuedCount);
return -EBUSY;
}
}
// If no buffer is found, wait for a buffer to be released or for
// the max buffer count to change.
tryAgain = found == INVALID_BUFFER_SLOT;
if (tryAgain) {
mDequeueCondition.wait(mMutex);
}
}
if (found == INVALID_BUFFER_SLOT) {
// This should not happen.
ST_LOGE("dequeueBuffer: no available buffer slots");
return -EBUSY;
}
const int buf = found;
*outBuf = found;
ATRACE_BUFFER_INDEX(buf);
const bool useDefaultSize = !w && !h;
if (useDefaultSize) {
// use the default size
w = mDefaultWidth;
h = mDefaultHeight;
}
mSlots[buf].mBufferState = BufferSlot::DEQUEUED;
const sp<GraphicBuffer>& buffer(mSlots[buf].mGraphicBuffer);
if ((buffer == NULL) ||
(uint32_t(buffer->width) != w) ||
(uint32_t(buffer->height) != h) ||
(uint32_t(buffer->format) != format) ||
((uint32_t(buffer->usage) & usage) != usage))
{
mSlots[buf].mAcquireCalled = false;
mSlots[buf].mGraphicBuffer = NULL;
mSlots[buf].mRequestBufferCalled = false;
mSlots[buf].mEglFence = EGL_NO_SYNC_KHR;
mSlots[buf].mFence = Fence::NO_FENCE;
mSlots[buf].mEglDisplay = EGL_NO_DISPLAY;
returnFlags |= IGraphicBufferProducer::BUFFER_NEEDS_REALLOCATION;
}
dpy = mSlots[buf].mEglDisplay;
eglFence = mSlots[buf].mEglFence;
*outFence = mSlots[buf].mFence;
mSlots[buf].mEglFence = EGL_NO_SYNC_KHR;
mSlots[buf].mFence = Fence::NO_FENCE;
} // end lock scope
if (returnFlags & IGraphicBufferProducer::BUFFER_NEEDS_REALLOCATION) {
status_t error;
sp<GraphicBuffer> graphicBuffer(
mGraphicBufferAlloc->createGraphicBuffer(
w, h, format, usage, &error));
if (graphicBuffer == 0) {
ST_LOGE("dequeueBuffer: SurfaceComposer::createGraphicBuffer "
"failed");
return error;
}
{ // Scope for the lock
Mutex::Autolock lock(mMutex);
if (mAbandoned) {
ST_LOGE("dequeueBuffer: BufferQueue has been abandoned!");
return NO_INIT;
}
mSlots[*outBuf].mGraphicBuffer = graphicBuffer;
}
}
if (eglFence != EGL_NO_SYNC_KHR) {
EGLint result = eglClientWaitSyncKHR(dpy, eglFence, 0, 1000000000);
// If something goes wrong, log the error, but return the buffer without
// synchronizing access to it. It's too late at this point to abort the
// dequeue operation.
if (result == EGL_FALSE) {
ST_LOGE("dequeueBuffer: error waiting for fence: %#x", eglGetError());
} else if (result == EGL_TIMEOUT_EXPIRED_KHR) {
ST_LOGE("dequeueBuffer: timeout waiting for fence");
}
eglDestroySyncKHR(dpy, eglFence);
}
ST_LOGV("dequeueBuffer: returning slot=%d buf=%p flags=%#x", *outBuf,
mSlots[*outBuf].mGraphicBuffer->handle, returnFlags);
return returnFlags;
}
// conversion function should format by format, chip by chip
// currently input is MTK_I420, and output is IMG_YV12/ABGR
status_t SurfaceTexture::convertToAuxSlotLocked(bool isForce) {
// check invalid buffer
if (BufferQueue::INVALID_BUFFER_SLOT == mCurrentTexture) {
mAuxSlotConvert = false;
return INVALID_OPERATION;
}
ATRACE_CALL();
// 1) normal BufferQueue needs conversion now
// 2) SurfaceTextureLayer neesd conversion after HWC
bool isNeedConversionNow =
(BufferQueue::TYPE_BufferQueue == mBufferQueue->getType()) ||
((true == isForce) && (BufferQueue::TYPE_SurfaceTextureLayer == mBufferQueue->getType()));
//if ((true == isNeedConversionNow) && (BufferQueue::NO_CONNECTED_API != getConnectedApi())) {
if (true == isNeedConversionNow) {
XLOGI("do convertToAuxSlot...");
Slot &src = mSlots[mCurrentTexture];
AuxSlot &dst = *mBackAuxSlot;
// fence sync here for buffer not used by G3D
EGLSyncKHR fence = mFrontAuxSlot->eglSlot.mEglFence;
if (fence != EGL_NO_SYNC_KHR) {
EGLint result = eglClientWaitSyncKHR(mEglDisplay, fence, 0, 1000000000);
if (result == EGL_FALSE) {
XLOGW("[%s] FAILED waiting for front fence: %#x, tearing risk", __func__, eglGetError());
} else if (result == EGL_TIMEOUT_EXPIRED_KHR) {
XLOGW("[%s] TIMEOUT waiting for front fence, tearing risk", __func__);
}
eglDestroySyncKHR(mEglDisplay, fence);
mFrontAuxSlot->eglSlot.mEglFence = EGL_NO_SYNC_KHR;
}
#ifdef USE_MDP
uint32_t hal_out_fmt;
uint32_t mdp_in_fmt;
uint32_t mdp_out_fmt;
//if (NATIVE_WINDOW_API_CAMERA == getConnectedApi()) {
hal_out_fmt = HAL_PIXEL_FORMAT_RGBA_8888;
// camera path needs RGBA for MDP resource
mdp_out_fmt = MHAL_FORMAT_ABGR_8888;
//} else {
// hal_out_fmt = HAL_PIXEL_FORMAT_YV12;
// mdp_out_fmt = MHAL_FORMAT_IMG_YV12;
//}
// !!! only convert for I420 now !!!
mdp_in_fmt = MHAL_FORMAT_YUV_420;
// source graphic buffer
sp<GraphicBuffer> sg = src.mGraphicBuffer;
// destination graphic buffer
sp<GraphicBuffer> dg = dst.slot.mGraphicBuffer;
// free if current aux slot exist and not fit
if ((EGL_NO_IMAGE_KHR != dst.eglSlot.mEglImage && dg != NULL) &&
((sg->width != dg->width) || (sg->height != dg->height) || (hal_out_fmt != (uint32_t)dg->format))) {
XLOGI("[%s] free old aux slot ", __func__);
XLOGI(" src[w:%d, h:%d, f:0x%x] dst[w:%d, h:%d, f:0x%x] required format:0x%x",
sg->width, sg->height, sg->format,
dg->width, dg->height, dg->format,
hal_out_fmt);
freeAuxSlotLocked(dst);
}
// create aux buffer if current is NULL
if ((EGL_NO_IMAGE_KHR == dst.eglSlot.mEglImage) && (dst.slot.mGraphicBuffer == NULL)) {
XLOGI("[%s] create dst buffer and image", __func__);
XLOGI(" before create new aux buffer: %p", __func__, dg.get());
dg = dst.slot.mGraphicBuffer = new GraphicBuffer(sg->width,
sg->height,
hal_out_fmt,
sg->usage);
if (dg == NULL) {
XLOGE(" create aux GraphicBuffer FAILED", __func__);
freeAuxSlotLocked(dst);
return BAD_VALUE;
} else {
XLOGI(" create aux GraphicBuffer: %p", __func__, dg.get());
}
dst.eglSlot.mEglImage = createImage(mEglDisplay, dg);
if (EGL_NO_IMAGE_KHR == dst.eglSlot.mEglImage) {
XLOGE("[%s] create aux eglImage FAILED", __func__);
freeAuxSlotLocked(dst);
return BAD_VALUE;
}
XLOGI("[%s] create aux slot success", __func__);
XLOGI(" src[w:%d, h:%d, f:0x%x], dst[w:%d, h:%d, f:0x%x]",
sg->width, sg->height, sg->format,
dg->width, dg->height, dg->format);
dst.mMva = registerMva(dg);
}
status_t lockret;
uint8_t *src_yp, *dst_yp;
lockret = sg->lock(LOCK_FOR_MDP, (void**)&src_yp);
if (NO_ERROR != lockret) {
XLOGE("[%s] buffer lock fail: %s", __func__, strerror(lockret));
return INVALID_OPERATION;
}
lockret = dg->lock(LOCK_FOR_MDP, (void**)&dst_yp);
if (NO_ERROR != lockret) {
XLOGE("[%s] buffer lock fail: %s", __func__, strerror(lockret));
return INVALID_OPERATION;
}
{
mHalBltParam_t bltParam;
memset(&bltParam, 0, sizeof(bltParam));
bltParam.srcAddr = (MUINT32)src_yp;
bltParam.srcX = 0;
bltParam.srcY = 0;
bltParam.srcW = sg->width;
// !!! I420 content is forced 16 align !!!
bltParam.srcWStride = ALIGN(sg->width, 16);
bltParam.srcH = sg->height;
bltParam.srcHStride = sg->height;
bltParam.srcFormat = mdp_in_fmt;
bltParam.dstAddr = (MUINT32)dst_yp;
bltParam.dstW = dg->width;
// already 32 align
bltParam.pitch = dg->stride;
bltParam.dstH = dg->height;
bltParam.dstFormat = mdp_out_fmt;
#ifdef MTK_75DISPLAY_ENHANCEMENT_SUPPORT
bltParam.doImageProcess = (NATIVE_WINDOW_API_MEDIA == getConnectedApi()) ? 1 : 0;
#endif
// mdp bitblt and check
if (MHAL_NO_ERROR != ipcBitBlt(&bltParam)) {
if (1 == bltParam.doImageProcess) {
XLOGW("[%s] bitblt FAILED with PQ, disable and try again", __func__);
bltParam.doImageProcess = 0;
if (MHAL_NO_ERROR != ipcBitBlt(&bltParam)) {
XLOGE("[%s] bitblt FAILED, unlock buffer and return", __func__);
dst.slot.mGraphicBuffer->unlock();
src.mGraphicBuffer->unlock();
return INVALID_OPERATION;
}
} else {
XLOGE("[%s] bitblt FAILED, unlock buffer and return", __func__);
dst.slot.mGraphicBuffer->unlock();
src.mGraphicBuffer->unlock();
return INVALID_OPERATION;
}
} else {
// for drawing debug line
if (true == mLine) {
int _stride = bltParam.pitch;
uint8_t *_ptr = (uint8_t*)bltParam.dstAddr;
static uint32_t offset = bltParam.dstH / 4;
//ST_XLOGI("!!!!! draw line, ptr: %p, offset: %d, stride: %d, height: %d", _ptr, offset, _stride, bltParam.dstH);
if (NULL != _ptr) {
memset((void*)(_ptr + offset * _stride * 3 / 2), 0xFF, _stride * 20 * 3 / 2);
}
offset += 20;
if (offset >= bltParam.dstH * 3 / 4)
offset = bltParam.dstH / 4;
}
}
}
dg->unlock();
sg->unlock();
#else // ! USE_MDP
status_t err = swConversionLocked(src, dst);
if (NO_ERROR != err)
return err;
#endif // USE_MDP
mAuxSlotConvert = false;
mAuxSlotDirty = true;
}
return NO_ERROR;
}
void EglManager::fence() {
EGLSyncKHR fence = eglCreateSyncKHR(mEglDisplay, EGL_SYNC_FENCE_KHR, NULL);
eglClientWaitSyncKHR(mEglDisplay, fence, EGL_SYNC_FLUSH_COMMANDS_BIT_KHR, EGL_FOREVER_KHR);
eglDestroySyncKHR(mEglDisplay, fence);
}