C++ (Cpp) ek_add_device_spi примеры использования

Пример #1

Файл: board-usb-a926x.c Проект: Blackburn29/PsycoKernel

static void __init ek_board_init(void)
{
	
	at91_add_device_serial();
	
	at91_add_device_usbh(&ek_usbh_data);
	
	ek_add_device_udc();
	
	ek_add_device_spi();
	
	ek_add_device_eth();
	
	ek_add_device_nand();
	
	ek_add_device_buttons();
	
	ek_add_device_leds();

	if (machine_is_usb_a9g20()) {
		
		at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
	} else {
		
		at91_add_device_i2c(NULL, 0);
		
		at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
				| AT91_SHDW_WKMODE0_LOW
				| AT91_SHDW_RTTWKEN);
	}
}

Пример #2

Файл: init.c Проект: SayCV/barebox-at91

static int at91sam9m10g45ek_devices_init(void)
{
	ek_add_device_nand();
	ek_add_device_spi();
	at91_add_device_eth(0, &macb_pdata);
	ek_add_device_mci();
	ek_add_device_usb();
	ek_device_add_leds();
	ek_device_add_keyboard();
	ek_add_device_lcdc();

	devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
	dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
	devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");
	devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
	dev_add_bb_dev("env_raw1", "env1");

	armlinux_set_bootparams((void *)(AT91_CHIPSELECT_6 + 0x100));
	armlinux_set_architecture(MACH_TYPE_AT91SAM9M10G45EK);
	ek_set_board_revision();

	return 0;
}

Пример #3

Файл: board-usb-a926x.c Проект: 08opt/linux

static void __init ek_board_init(void)
{
	/* Serial */
	at91_add_device_serial();
	/* USB Host */
	at91_add_device_usbh(&ek_usbh_data);
	/* USB Device */
	ek_add_device_udc();
	/* SPI */
	ek_add_device_spi();
	/* Ethernet */
	ek_add_device_eth();
	/* NAND */
	ek_add_device_nand();
	/* Push Buttons */
	ek_add_device_buttons();
	/* LEDs */
	ek_add_device_leds();

	if (machine_is_usb_a9g20()) {
		/* I2C */
		at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
	} else {
		/* I2C */
		at91_add_device_i2c(NULL, 0);
		/* shutdown controller, wakeup button (5 msec low) */
		at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
				| AT91_SHDW_WKMODE0_LOW
				| AT91_SHDW_RTTWKEN);
	}
}

Пример #4

Файл: init.c Проект: dgarnier/barebox

static int at91rm9200ek_devices_init(void)
{
	/*
	 * Correct IRDA resistor problem
	 * Set PA23_TXD in Output
	 */
	at91_set_gpio_output(AT91_PIN_PA23, 1);

	at91_add_device_eth(0, &ether_pdata);

	add_cfi_flash_device(0, AT91_CHIPSELECT_0, SZ_8M, 0);
	/* USB Host */
	at91_add_device_usbh_ohci(&ek_usbh_data);
	ek_device_add_leds();
	ek_add_device_udc();
	ek_add_device_spi();

#if defined(CONFIG_DRIVER_CFI) || defined(CONFIG_DRIVER_CFI_OLD)
	devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self");
	devfs_add_partition("nor0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0");
#endif

	armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
	armlinux_set_architecture(MACH_TYPE_AT91RM9200EK);

	return 0;
}

Пример #5

Файл: init.c Проект: cuijfboy/barebox

static int at91sam9n12ek_devices_init(void)
{
	ek_add_device_spi();
	ek_add_device_nand();
	ek_add_device_mci();
	ek_add_led();
	at91_add_device_udc(&ek_udc_data);
	ek_add_device_i2c();
	ek_add_device_ks8851();
	ek_add_device_buttons();
	ek_add_device_lcdc();

	armlinux_set_architecture(CONFIG_MACH_AT91SAM9N12EK);

	devfs_add_partition("nand0", 0x00000, SZ_256K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
	dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
	devfs_add_partition("nand0", SZ_256K, SZ_256K + SZ_128K, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", SZ_512K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");
	devfs_add_partition("nand0", SZ_512K + SZ_256K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
	dev_add_bb_dev("env_raw1", "env1");

	return 0;
}

Пример #6

Файл: init.c Проект: Tractorfirmware/barebox

static int at91sam9x5ek_devices_init(void)
{
	ek_add_device_w1();
	ek_add_device_nand();
	ek_add_device_eth();
	ek_add_device_spi();
	ek_add_device_mci();
	ek_add_device_usb();
	ek_add_led();
	ek_add_device_i2c();
	ek_add_device_lcdc();

	armlinux_set_architecture(CONFIG_MACH_AT91SAM9X5EK);

	devfs_add_partition("nand0", 0x00000, SZ_256K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
	dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
	devfs_add_partition("nand0", SZ_256K, SZ_256K + SZ_128K, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", SZ_512K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");
	devfs_add_partition("nand0", SZ_512K + SZ_256K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
	dev_add_bb_dev("env_raw1", "env1");

	if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
		defaultenv_append_directory(defaultenv_at91sam9x5ek);

	return 0;
}

Пример #7

Файл: init.c Проект: AubrCool/barebox

static int at91sam9m10ihd_devices_init(void)
{
	ek_add_device_w1();
	ek_add_device_nand();
	ek_add_device_eth();
	ek_add_device_mci();
	ek_add_device_spi();
	ek_add_device_i2c();
	ek_add_device_usb();
	ek_add_device_lcd();

	devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
	dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
	devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");
	devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
	dev_add_bb_dev("env_raw1", "env1");

	/*
	 * The internal Atmel kernel use the SAM9M10G45EK machine id
	 * The mainline use DT
	 */
	armlinux_set_architecture(MACH_TYPE_AT91SAM9M10G45EK);

	return 0;
}

Пример #8

Файл: init.c Проект: RobertCNelson/barebox

static int tny_a9260_devices_init(void)
{
	tny_a9260_add_device_nand();
	ek_add_device_macb();
	ek_add_device_udc();
	ek_add_device_spi();

	tny_a9260_set_board_type();

	devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
	dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
	devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");
	devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
	dev_add_bb_dev("env_raw1", "env1");

	return 0;
}

Пример #9

Файл: init.c Проект: zandar/barebox

static int at91sam9261ek_devices_init(void)
{
    u32 barebox_part_start;
    u32 barebox_part_size;

    ek_add_device_nand();
    ek_add_device_dm9000();
    ek_add_device_udc();
    ek_add_device_buttons();
    ek_device_add_leds();
    ek_add_device_lcdc();
    ek_add_device_spi();

    if (IS_ENABLED(CONFIG_AT91_LOAD_BAREBOX_SRAM)) {
        barebox_part_start = 0;
        barebox_part_size = SZ_256K + SZ_128K;
        export_env_ull("borebox_first_stage", 1);
    } else {
        devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
        barebox_part_start = SZ_128K;
        barebox_part_size = SZ_256K;
    }
    devfs_add_partition("nand0", barebox_part_start, barebox_part_size,
                        DEVFS_PARTITION_FIXED, "self_raw");
    dev_add_bb_dev("self_raw", "self0");
    devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
    dev_add_bb_dev("env_raw", "env0");
    devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
    dev_add_bb_dev("env_raw1", "env1");

    if (machine_is_at91sam9g10ek())
        armlinux_set_architecture(MACH_TYPE_AT91SAM9G10EK);
    else
        armlinux_set_architecture(MACH_TYPE_AT91SAM9261EK);

    return 0;
}