void lower_vcall(Vunit& unit, Inst& inst, Vlabel b, size_t i) {
auto& blocks = unit.blocks;
auto const& vinstr = blocks[b].code[i];
auto const is_vcall = vinstr.op == Vinstr::vcall;
auto const vcall = vinstr.vcall_;
auto const vinvoke = vinstr.vinvoke_;
// We lower vinvoke in two phases, and `inst' is overwritten after the first
// phase. We need to save any of its parameters that we care about in the
// second phase ahead of time.
auto const& vargs = unit.vcallArgs[inst.args];
auto const dests = unit.tuples[inst.d];
auto const destType = inst.destType;
auto const scratch = unit.makeScratchBlock();
SCOPE_EXIT { unit.freeScratchBlock(scratch); };
Vout v(unit, scratch, vinstr.origin);
int32_t const adjust = (vargs.stkArgs.size() & 0x1) ? sizeof(uintptr_t) : 0;
if (adjust) v << lea{rsp()[-adjust], rsp()};
// Push stack arguments, in reverse order.
for (int i = vargs.stkArgs.size() - 1; i >= 0; --i) {
v << push{vargs.stkArgs[i]};
}
// Get the arguments in the proper registers.
RegSet argRegs;
bool needsCopy = false;
auto doArgs = [&] (const VregList& srcs, PhysReg (*r)(size_t)) {
VregList argDests;
for (size_t i = 0, n = srcs.size(); i < n; ++i) {
auto const reg = r(i);
argDests.push_back(reg);
argRegs |= reg;
}
if (argDests.size()) {
v << copyargs{v.makeTuple(srcs),
v.makeTuple(std::move(argDests))};
}
};
switch (arch()) {
case Arch::X64:
case Arch::PPC64:
doArgs(vargs.args, rarg);
break;
case Arch::ARM:
if (vargs.indirect) {
if (vargs.args.size() > 0) {
// First arg is a pointer to storage for the return value.
v << copy{vargs.args[0], rret_indirect()};
VregList rem(vargs.args.begin() + 1, vargs.args.end());
doArgs(rem, rarg);
needsCopy = true;
}
} else {
doArgs(vargs.args, rarg);
}
}
doArgs(vargs.simdArgs, rarg_simd);
// Emit the appropriate call instruction sequence.
emitCall(v, inst.call, argRegs);
// Handle fixup and unwind information.
if (inst.fixup.isValid()) {
v << syncpoint{inst.fixup};
}
if (!is_vcall) {
auto& targets = vinvoke.targets;
v << unwind{{targets[0], targets[1]}};
// Insert an lea fixup for any stack args at the beginning of the catch
// block.
if (auto rspOffset = ((vargs.stkArgs.size() + 1) & ~1) *
sizeof(uintptr_t)) {
auto& taken = unit.blocks[targets[1]].code;
assertx(taken.front().op == Vinstr::landingpad ||
taken.front().op == Vinstr::jmp);
Vinstr vi { lea{rsp()[rspOffset], rsp()} };
vi.origin = taken.front().origin;
if (taken.front().op == Vinstr::jmp) {
taken.insert(taken.begin(), vi);
} else {
taken.insert(taken.begin() + 1, vi);
}
}
// Write out the code so far to the end of b. Remaining code will be
// emitted to the next block.
vector_splice(blocks[b].code, i, 1, blocks[scratch].code);
} else if (vcall.nothrow) {
v << nothrow{};
}
// Copy back the indirect result pointer into the return register.
if (needsCopy) {
v << copy{rret_indirect(), rret(0)};
}
// For vinvoke, `inst' is no longer valid after this point.
// Copy the call result to the destination register(s).
switch (destType) {
case DestType::TV:
static_assert(offsetof(TypedValue, m_data) == 0, "");
static_assert(offsetof(TypedValue, m_type) == 8, "");
if (dests.size() == 2) {
v << copy2{rret(0), rret(1), dests[0], dests[1]};
} else {
// We have cases where we statically know the type but need the value
// from native call. Even if the type does not really need a register
// (e.g., InitNull), a Vreg is still allocated in assignRegs(), so the
// following assertion holds.
assertx(dests.size() == 1);
v << copy{rret(0), dests[0]};
}
break;
case DestType::SIMD:
static_assert(offsetof(TypedValue, m_data) == 0, "");
static_assert(offsetof(TypedValue, m_type) == 8, "");
assertx(dests.size() == 1);
pack2(v, rret(0), rret(1), dests[0]);
break;
case DestType::SSA:
case DestType::Byte:
assertx(dests.size() == 1);
assertx(dests[0].isValid());
// Copy the single-register result to dests[0].
v << copy{rret(0), dests[0]};
break;
case DestType::Dbl:
// Copy the single-register result to dests[0].
assertx(dests.size() == 1);
assertx(dests[0].isValid());
v << copy{rret_simd(0), dests[0]};
break;
case DestType::None:
assertx(dests.empty());
break;
}
if (vargs.stkArgs.size() > 0) {
auto const delta = safe_cast<int32_t>(
vargs.stkArgs.size() * sizeof(uintptr_t) + adjust
);
v << lea{rsp()[delta], rsp()};
}
// Insert new instructions to the appropriate block.
if (is_vcall) {
vector_splice(blocks[b].code, i, 1, blocks[scratch].code);
} else {
vector_splice(blocks[vinvoke.targets[0]].code, 0, 0,
blocks[scratch].code);
}
}
void lower_vcall(Vunit& unit, Inst& inst, Vlabel b, size_t i) {
auto& blocks = unit.blocks;
auto const& vinstr = blocks[b].code[i];
auto const is_vcall = vinstr.op == Vinstr::vcall;
auto const vcall = vinstr.vcall_;
auto const vinvoke = vinstr.vinvoke_;
// We lower vinvoke in two phases, and `inst' is overwritten after the first
// phase. We need to save any of its parameters that we care about in the
// second phase ahead of time.
auto const& vargs = unit.vcallArgs[inst.args];
auto const dests = unit.tuples[inst.d];
auto const destType = inst.destType;
auto const scratch = unit.makeScratchBlock();
SCOPE_EXIT { unit.freeScratchBlock(scratch); };
Vout v(unit, scratch, vinstr.irctx());
// Push stack arguments, in reverse order. Push in pairs without padding
// except for the last argument (pushed first) which should be padded if
// there are an odd number of arguments.
auto numArgs = vargs.stkArgs.size();
int32_t const adjust = (numArgs & 0x1) ? sizeof(uintptr_t) : 0;
if (adjust) {
// Using InvalidReg below fails SSA checks and simplify pass, so just
// push the arg twice. It's on the same cacheline and will actually
// perform faster than an explicit lea.
v << pushp{vargs.stkArgs[numArgs - 1], vargs.stkArgs[numArgs - 1]};
--numArgs;
}
for (auto i2 = numArgs; i2 >= 2; i2 -= 2) {
v << pushp{vargs.stkArgs[i2 - 1], vargs.stkArgs[i2 - 2]};
}
// Get the arguments in the proper registers.
RegSet argRegs;
auto doArgs = [&] (const VregList& srcs, PhysReg (*r)(size_t)) {
VregList argDests;
for (size_t i2 = 0, n = srcs.size(); i2 < n; ++i2) {
auto const reg = r(i2);
argDests.push_back(reg);
argRegs |= reg;
}
if (argDests.size()) {
v << copyargs{v.makeTuple(srcs),
v.makeTuple(std::move(argDests))};
}
};
doArgs(vargs.indRetArgs, rarg_ind_ret);
doArgs(vargs.args, rarg);
doArgs(vargs.simdArgs, rarg_simd);
// Emit the appropriate call instruction sequence.
emitCall(v, inst.call, argRegs);
// Handle fixup and unwind information.
if (inst.fixup.isValid()) {
v << syncpoint{inst.fixup};
}
if (!is_vcall) {
auto& targets = vinvoke.targets;
v << unwind{{targets[0], targets[1]}};
// Insert an lea fixup for any stack args at the beginning of the catch
// block.
if (auto rspOffset = ((vargs.stkArgs.size() + 1) & ~1) *
sizeof(uintptr_t)) {
auto& taken = unit.blocks[targets[1]].code;
assertx(taken.front().op == Vinstr::landingpad ||
taken.front().op == Vinstr::jmp);
Vinstr vi { lea{rsp()[rspOffset], rsp()}, taken.front().irctx() };
if (taken.front().op == Vinstr::jmp) {
taken.insert(taken.begin(), vi);
} else {
taken.insert(taken.begin() + 1, vi);
}
}
// Write out the code so far to the end of b. Remaining code will be
// emitted to the next block.
vector_splice(blocks[b].code, i, 1, blocks[scratch].code);
} else if (vcall.nothrow) {
v << nothrow{};
}
// For vinvoke, `inst' is no longer valid after this point.
// Copy the call result to the destination register(s).
switch (destType) {
case DestType::TV:
static_assert(offsetof(TypedValue, m_data) == 0, "");
static_assert(offsetof(TypedValue, m_type) == 8, "");
if (dests.size() == 2) {
switch (arch()) {
case Arch::X64: // fall through
case Arch::PPC64:
v << copy2{rret(0), rret(1), dests[0], dests[1]};
break;
case Arch::ARM:
// For ARM64 we need to clear the bits 8..31 from the type value.
// That allows us to use the resulting register values in
// type comparisons without the need for truncation there.
// We must not touch bits 63..32 as they contain the AUX data.
v << copy{rret(0), dests[0]};
v << andq{v.cns(0xffffffff000000ff),
rret(1), dests[1], v.makeReg()};
break;
}
} else {
// We have cases where we statically know the type but need the value
// from native call. Even if the type does not really need a register
// (e.g., InitNull), a Vreg is still allocated in assignRegs(), so the
// following assertion holds.
assertx(dests.size() == 1);
v << copy{rret(0), dests[0]};
}
break;
case DestType::SIMD:
static_assert(offsetof(TypedValue, m_data) == 0, "");
static_assert(offsetof(TypedValue, m_type) == 8, "");
assertx(dests.size() == 1);
pack2(v, rret(0), rret(1), dests[0]);
break;
case DestType::SSA:
case DestType::Byte:
assertx(dests.size() == 1);
assertx(dests[0].isValid());
// Copy the single-register result to dests[0].
v << copy{rret(0), dests[0]};
break;
case DestType::SSAPair:
assertx(dests.size() == 2);
assertx(dests[0].isValid());
assertx(dests[1].isValid());
// Copy the result pair to dests.
v << copy2{rret(0), rret(1), dests[0], dests[1]};
break;
case DestType::Dbl:
// Copy the single-register result to dests[0].
assertx(dests.size() == 1);
assertx(dests[0].isValid());
v << copy{rret_simd(0), dests[0]};
break;
case DestType::Indirect:
// Already asserted above
break;
case DestType::None:
assertx(dests.empty());
break;
}
if (vargs.stkArgs.size() > 0) {
auto const delta = safe_cast<int32_t>(
vargs.stkArgs.size() * sizeof(uintptr_t) + adjust
);
v << lea{rsp()[delta], rsp()};
}
// Insert new instructions to the appropriate block.
if (is_vcall) {
vector_splice(blocks[b].code, i, 1, blocks[scratch].code);
} else {
vector_splice(blocks[vinvoke.targets[0]].code, 0, 0,
blocks[scratch].code);
}
}
