/*
* Clean up this request.
*/
int sbull_end_request(struct request *req, int status)
{
if (end_that_request_first(req, status, DEVICE_NAME))
return 1;
end_that_request_last(req);
return 0;
}
void sbull_request(request_queue_t *q)
{
Sbull_Dev *device;
struct request *req;
int status;
/* Find our device */
device = sbull_locate_device (blkdev_entry_next_request(&q->queue_head));
if (device->busy) /* no race here - io_request_lock held */
return;
device->busy = 1;
/* Process requests in the queue */
while(! list_empty(&q->queue_head)) {
/* Pull the next request off the list. */
req = blkdev_entry_next_request(&q->queue_head);
blkdev_dequeue_request(req);
spin_unlock_irq (&io_request_lock);
spin_lock(&device->lock);
/* Process all of the buffers in this (possibly clustered) request. */
do {
status = sbull_transfer(device, req);
} while (end_that_request_first(req, status, DEVICE_NAME));
spin_unlock(&device->lock);
spin_lock_irq (&io_request_lock);
end_that_request_last(req);
}
device->busy = 0;
}
int ide_end_request (ide_drive_t *drive, int uptodate)
{
struct request *rq;
unsigned long flags;
int ret = 1;
spin_lock_irqsave(&io_request_lock, flags);
rq = HWGROUP(drive)->rq;
/*
* decide whether to reenable DMA -- 3 is a random magic for now,
* if we DMA timeout more than 3 times, just stay in PIO
*/
if (drive->state == DMA_PIO_RETRY && drive->retry_pio <= 3) {
drive->state = 0;
HWGROUP(drive)->hwif->ide_dma_on(drive);
}
if (!end_that_request_first(rq, uptodate, drive->name)) {
add_blkdev_randomness(MAJOR(rq->rq_dev));
blkdev_dequeue_request(rq);
HWGROUP(drive)->rq = NULL;
end_that_request_last(rq);
ret = 0;
}
spin_unlock_irqrestore(&io_request_lock, flags);
return ret;
}
void xsysace_end_request(struct request *req, int uptodate)
{
if (!end_that_request_first(req, uptodate, req->hard_cur_sectors)) {
blkdev_dequeue_request(req);
end_that_request_last(req);
}
}
/*
* Post finished request.
*/
static inline void
tapeblock_end_request(struct request *req, int uptodate)
{
if (end_that_request_first(req, uptodate, req->hard_nr_sectors))
BUG();
end_that_request_last(req, uptodate);
}
static void nbd_end_request(struct request *req)
{
int uptodate = (req->errors == 0) ? 1 : 0;
request_queue_t *q = req->q;
struct nbd_device *lo = req->rq_disk->private_data;
unsigned long flags;
dprintk(DBG_BLKDEV, "%s: request %p: %s\n", req->rq_disk->disk_name,
req, uptodate? "done": "failed");
spin_lock(&lo->queue_lock);
while (req->ref_count > 1) { /* still in send */
spin_unlock(&lo->queue_lock);
printk(KERN_DEBUG "%s: request %p still in use (%d), waiting\n",
lo->disk->disk_name, req, req->ref_count);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(HZ); /* wait a second */
spin_lock(&lo->queue_lock);
}
spin_unlock(&lo->queue_lock);
spin_lock_irqsave(q->queue_lock, flags);
if (!end_that_request_first(req, uptodate, req->nr_sectors)) {
end_that_request_last(req);
}
spin_unlock_irqrestore(q->queue_lock, flags);
}
/*
* Post finished request.
*/
static inline void
tapeblock_end_request(struct request *req, int uptodate)
{
if (end_that_request_first(req, uptodate, "tBLK"))
BUG();
end_that_request_last(req);
}
static void nbd_end_request(struct request *req)
{
int uptodate = (req->errors == 0) ? 1 : 0;
request_queue_t *q = req->q;
unsigned long flags;
dprintk(DBG_BLKDEV, "%s: request %p: %s\n", req->rq_disk->disk_name,
req, uptodate? "done": "failed");
spin_lock_irqsave(q->queue_lock, flags);
if (!end_that_request_first(req, uptodate, req->nr_sectors)) {
end_that_request_last(req, uptodate);
}
spin_unlock_irqrestore(q->queue_lock, flags);
}
int __ide_end_request(ide_drive_t *drive, struct request *rq, int uptodate,
int nr_sectors)
{
int ret = 1;
BUG_ON(!(rq->flags & REQ_STARTED));
/*
* if failfast is set on a request, override number of sectors and
* complete the whole request right now
*/
if (blk_noretry_request(rq) && end_io_error(uptodate))
nr_sectors = rq->hard_nr_sectors;
if (!blk_fs_request(rq) && end_io_error(uptodate) && !rq->errors)
rq->errors = -EIO;
/*
* decide whether to reenable DMA -- 3 is a random magic for now,
* if we DMA timeout more than 3 times, just stay in PIO
*/
if (drive->state == DMA_PIO_RETRY && drive->retry_pio <= 3) {
drive->state = 0;
HWGROUP(drive)->hwif->ide_dma_on(drive);
}
if (!end_that_request_first(rq, uptodate, nr_sectors)) {
add_disk_randomness(rq->rq_disk);
if (blk_rq_tagged(rq))
blk_queue_end_tag(drive->queue, rq);
blkdev_dequeue_request(rq);
HWGROUP(drive)->rq = NULL;
end_that_request_last(rq);
ret = 0;
}
return ret;
}
static void ace_fsm_dostate(struct ace_device *ace)
{
struct request *req;
u32 status;
u16 val;
int count;
int i;
#if defined(DEBUG)
dev_dbg(ace->dev, "fsm_state=%i, id_req_count=%i\n",
ace->fsm_state, ace->id_req_count);
#endif
switch (ace->fsm_state) {
case ACE_FSM_STATE_IDLE:
/* See if there is anything to do */
if (ace->id_req_count || ace_get_next_request(ace->queue)) {
ace->fsm_iter_num++;
ace->fsm_state = ACE_FSM_STATE_REQ_LOCK;
mod_timer(&ace->stall_timer, jiffies + HZ);
if (!timer_pending(&ace->stall_timer))
add_timer(&ace->stall_timer);
break;
}
del_timer(&ace->stall_timer);
ace->fsm_continue_flag = 0;
break;
case ACE_FSM_STATE_REQ_LOCK:
if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) {
/* Already have the lock, jump to next state */
ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY;
break;
}
/* Request the lock */
val = ace_in(ace, ACE_CTRL);
ace_out(ace, ACE_CTRL, val | ACE_CTRL_LOCKREQ);
ace->fsm_state = ACE_FSM_STATE_WAIT_LOCK;
break;
case ACE_FSM_STATE_WAIT_LOCK:
if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) {
/* got the lock; move to next state */
ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY;
break;
}
/* wait a bit for the lock */
ace_fsm_yield(ace);
break;
case ACE_FSM_STATE_WAIT_CFREADY:
status = ace_in32(ace, ACE_STATUS);
if (!(status & ACE_STATUS_RDYFORCFCMD) ||
(status & ACE_STATUS_CFBSY)) {
/* CF card isn't ready; it needs to be polled */
ace_fsm_yield(ace);
break;
}
/* Device is ready for command; determine what to do next */
if (ace->id_req_count)
ace->fsm_state = ACE_FSM_STATE_IDENTIFY_PREPARE;
else
ace->fsm_state = ACE_FSM_STATE_REQ_PREPARE;
break;
case ACE_FSM_STATE_IDENTIFY_PREPARE:
/* Send identify command */
ace->fsm_task = ACE_TASK_IDENTIFY;
ace->data_ptr = &ace->cf_id;
ace->data_count = ACE_BUF_PER_SECTOR;
ace_out(ace, ACE_SECCNTCMD, ACE_SECCNTCMD_IDENTIFY);
/* As per datasheet, put config controller in reset */
val = ace_in(ace, ACE_CTRL);
ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET);
/* irq handler takes over from this point; wait for the
* transfer to complete */
ace->fsm_state = ACE_FSM_STATE_IDENTIFY_TRANSFER;
ace_fsm_yieldirq(ace);
break;
case ACE_FSM_STATE_IDENTIFY_TRANSFER:
/* Check that the sysace is ready to receive data */
status = ace_in32(ace, ACE_STATUS);
if (status & ACE_STATUS_CFBSY) {
dev_dbg(ace->dev, "CFBSY set; t=%i iter=%i dc=%i\n",
ace->fsm_task, ace->fsm_iter_num,
ace->data_count);
ace_fsm_yield(ace);
break;
}
if (!(status & ACE_STATUS_DATABUFRDY)) {
ace_fsm_yield(ace);
break;
}
/* Transfer the next buffer */
ace->reg_ops->datain(ace);
ace->data_count--;
/* If there are still buffers to be transfers; jump out here */
if (ace->data_count != 0) {
ace_fsm_yieldirq(ace);
break;
}
/* transfer finished; kick state machine */
dev_dbg(ace->dev, "identify finished\n");
ace->fsm_state = ACE_FSM_STATE_IDENTIFY_COMPLETE;
break;
case ACE_FSM_STATE_IDENTIFY_COMPLETE:
ace_fix_driveid(&ace->cf_id);
ace_dump_mem(&ace->cf_id, 512); /* Debug: Dump out disk ID */
if (ace->data_result) {
/* Error occured, disable the disk */
ace->media_change = 1;
set_capacity(ace->gd, 0);
dev_err(ace->dev, "error fetching CF id (%i)\n",
ace->data_result);
} else {
ace->media_change = 0;
/* Record disk parameters */
set_capacity(ace->gd, ace->cf_id.lba_capacity);
dev_info(ace->dev, "capacity: %i sectors\n",
ace->cf_id.lba_capacity);
}
/* We're done, drop to IDLE state and notify waiters */
ace->fsm_state = ACE_FSM_STATE_IDLE;
ace->id_result = ace->data_result;
while (ace->id_req_count) {
complete(&ace->id_completion);
ace->id_req_count--;
}
break;
case ACE_FSM_STATE_REQ_PREPARE:
req = ace_get_next_request(ace->queue);
if (!req) {
ace->fsm_state = ACE_FSM_STATE_IDLE;
break;
}
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
"request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
req->sector, req->hard_nr_sectors,
req->current_nr_sectors, rq_data_dir(req));
ace->req = req;
ace->data_ptr = req->buffer;
ace->data_count = req->current_nr_sectors * ACE_BUF_PER_SECTOR;
ace_out32(ace, ACE_MPULBA, req->sector & 0x0FFFFFFF);
count = req->hard_nr_sectors;
if (rq_data_dir(req)) {
/* Kick off write request */
dev_dbg(ace->dev, "write data\n");
ace->fsm_task = ACE_TASK_WRITE;
ace_out(ace, ACE_SECCNTCMD,
count | ACE_SECCNTCMD_WRITE_DATA);
} else {
/* Kick off read request */
dev_dbg(ace->dev, "read data\n");
ace->fsm_task = ACE_TASK_READ;
ace_out(ace, ACE_SECCNTCMD,
count | ACE_SECCNTCMD_READ_DATA);
}
/* As per datasheet, put config controller in reset */
val = ace_in(ace, ACE_CTRL);
ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET);
/* Move to the transfer state. The systemace will raise
* an interrupt once there is something to do
*/
ace->fsm_state = ACE_FSM_STATE_REQ_TRANSFER;
if (ace->fsm_task == ACE_TASK_READ)
ace_fsm_yieldirq(ace); /* wait for data ready */
break;
case ACE_FSM_STATE_REQ_TRANSFER:
/* Check that the sysace is ready to receive data */
status = ace_in32(ace, ACE_STATUS);
if (status & ACE_STATUS_CFBSY) {
dev_dbg(ace->dev,
"CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n",
ace->fsm_task, ace->fsm_iter_num,
ace->req->current_nr_sectors * 16,
ace->data_count, ace->in_irq);
ace_fsm_yield(ace); /* need to poll CFBSY bit */
break;
}
if (!(status & ACE_STATUS_DATABUFRDY)) {
dev_dbg(ace->dev,
"DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n",
ace->fsm_task, ace->fsm_iter_num,
ace->req->current_nr_sectors * 16,
ace->data_count, ace->in_irq);
ace_fsm_yieldirq(ace);
break;
}
/* Transfer the next buffer */
i = 16;
if (ace->fsm_task == ACE_TASK_WRITE)
ace->reg_ops->dataout(ace);
else
ace->reg_ops->datain(ace);
ace->data_count--;
/* If there are still buffers to be transfers; jump out here */
if (ace->data_count != 0) {
ace_fsm_yieldirq(ace);
break;
}
/* bio finished; is there another one? */
i = ace->req->current_nr_sectors;
if (end_that_request_first(ace->req, 1, i)) {
/* dev_dbg(ace->dev, "next block; h=%li c=%i\n",
* ace->req->hard_nr_sectors,
* ace->req->current_nr_sectors);
*/
ace->data_ptr = ace->req->buffer;
ace->data_count = ace->req->current_nr_sectors * 16;
ace_fsm_yieldirq(ace);
break;
}
ace->fsm_state = ACE_FSM_STATE_REQ_COMPLETE;
break;
case ACE_FSM_STATE_REQ_COMPLETE:
/* Complete the block request */
blkdev_dequeue_request(ace->req);
end_that_request_last(ace->req, 1);
ace->req = NULL;
/* Finished request; go to idle state */
ace->fsm_state = ACE_FSM_STATE_IDLE;
break;
default:
ace->fsm_state = ACE_FSM_STATE_IDLE;
break;
}
}
void kfioc_has_end_request(void){
end_that_request_first(NULL, 0, 0);
}
